Book Editor, Chapter & Proceedings Editorial:

1. Book Editor: “ Novel Applications of Carbon Based Nano-Materials”, Taylor & Francis Group, CRC press, Boca Raton, USA (2022) (Link)  
2. Book Chapter on “ Biodegradable Magnesium Composites for Orthopedic Applications”, Wiley-Scrivener press (USA)(2023) (Link) 
3. Editor of Special Edition of Materials Today: Proceedings, Volume 28, Part 2, Pages 379-1278 (2020) (Link)
4. Editor of Special Edition of IOP Conference Series: Materials Science and Engineering, 346 (2018) 011001(Link)

(31.)  Brindha Ramasubramanian, Sai Krishna Tipparaju, S. Vincent, and Seeram Ramakrishna “Advances in Nanofiber Cathodes for Aluminum Ion Battery”, Advanced Fiber Materials,(2025)  (Impact factor:17.2- Q1) (Link)

(30.) Siva Shankar Alla, Mohammad Eskandari, Shristy Jha, Ziyu Pei, S. Vincent, Wook Ha Ryu, Eun Soo Park and Sundeep Mukherjee, "Effect of Ag and Ti Addition on the Deformation and Tribological Behavior of Zr-Co-Al Bulk Metallic Glass", Metals, 15,213 (2025)  (Impact factor:2.7- Q1) (Link)

(29.)  Priya Sudha, K. S. Tun, Jisha Pillai, Mainak Dutta,  M. Gupta & S. Vincent* “Biocorrosion and cytotoxicity studies on biodegradable Mg-based multicomponent alloys”, Bioengineering, 11(6),(2024) 621 (Impact factor:4.6- Q2) (Link)

(27.) Yogesh Prabhu, Abhilasha Jain, R. Lakshmi Narayan, Priyanka Saini,  S. Vincent, W.H. Ryu, E. S. Park,  Jatin Bhatt, “Crystallization Kinetics and Nanoindentation Studies of Cu₄₆Zr₄₀Ti_8.5Al_5.5 Glassy Alloy”, Journal of Non-Crystalline Solids, 65 (2024) 122753 (Impact Factor: 4.4- Q1) (Link)

(26.) Kartheek S.M. Sonti, Pavan Kumar P,  S. Vincent & N. Suresh Kumar Reddy, "Experimental and numerical analysis of the compression behavior of aluminum syntactic foams reinforced with alumina hollow particles", Engineering Structures , 300 (2023) 117144 (Impact Factor: 5.5 - Q1) (Link)

(25.) Kartheek S.M. Sonti, S. Vincent & N. Suresh Kumar Reddy, "Quasi-static compressive response and energy absorption properties of aluminum matrix syntactic foams: Room temperature and elevated temperature conditions", Materials Today Communications, 35 (2023) 105580, (Impact Factor: 3.66 - Q1) (Link)

(24.) Kartheek S.M. Sonti, S. Vincent & N. Suresh Kumar Reddy, "Effect of single and hybrid hollow sphere reinforcement on the deformation mechanism of aluminum matrix syntactic foam at a low strain rate", Journal of Alloys and Compounds, 901 (2022) 163573. (Impact Factor: 6.3 - Q1) (Link)

(23.) K. S. Tun, Anchal Nahata, S. Vincent, M. Gupta, “Development of a Low Entropy, Lightweight, Multicomponent,  High Performance (hardness+strength+ductility) Magnesium Based Alloy”, JOM,  (2022) (Impact Factor: 2.6 - Q1) (Link)

(22.) Yogesh Prabhu, Abhilasha Jain, S. Vincent, W.H. Ryu, E. S. Park, Ashutosh D. Bagde, Jatin Bhatt, “Compositional design and in vitro characterization of novel Zr-Co-Cu-Ti metallic glass for biomedical application”, Intermetallics, 150 (2022) 107692 (Impact Factor: 4.07- Q1) (Link)

(21.) Abhilasha Jain, Yogesh Prabhu, Dmitry Gunderov, R.Lakshmi Narayan, Priyanka Saini, Ashutosh D. Bagde, Priya Sudha, S. Vincent, Jatin Bhatt, “Structural characterization, biocorrosion and In-vitro investigation on Zr₆₂Cu₂₂Al₁₀Fe₅Dy₁ metallic glass for bio-implant applications”, Journal of Non-Crystalline Solids, 598 (2022) 121928. (Impact Factor: 4.4- Q1) (Link)

(20.) Chandini M, Murchana C, S. Vincent, Kumar Raju, Jessin Mathai, Shailesh Damale & Prakash Kumar B G, "Process optimization, characterization and economic evaluation of nanoparticles derived from galvanic sludge for photodegradation of 4-NP under natural sunlight", Journal of Cleaner Production, 371 (2022) 133616(Impact Factor: 11.1- Q1)) (Link)

(19.) Yogesh Prabhu ,S.Vincent, Adithya Nair, Wan Kim, E.S. Park,  Jatin Bhatt,  "Composition design and Nanoindentation studies on Mg-Zn-Ca metallic glass", Metallurgical and Materials Transactions A, 53(2022) 1419–1429 (Impact factor:2.7- Q1) (Link)

(18.)  Priya Sudha, K. S. Tun, M. Gupta, Gulshan Kumar & S. Vincent* “Biocorrosion studies of a Novel Mg70Al18Zn6Ca4Y2 low entropy multicomponent alloy in different simulated body fluids”, Journal of Applied Electrochemistry,52 (2022)  1109–1120 (Impact factor:2.9- Q2) (Link)

(17.) Priya Sudha, K. S. Tun, M. Gupta, Abdel-Hamid Ismail Mourad & S. Vincent* “Electrochemical characterization of a novel Al-Mg-Li-Zn-Cu low entropy alloy in different pH environments”, Materials & Corrosion, (2022) 1-13 (Impact factor:1.8- Q2) (Link)

(16.)Syed Haris Iftikhar, Abdel-Hamid Ismail Mourad, Jamal Sheikh-Ahmad, Fahad Almaskari and S. Vincent,  “A Comprehensive Review on Optimal Welding Conditions for Friction Stir Welding of Thermoplastic Polymers and Their Composites”, Polymers, 13 (2021) 1208. (Impact factor:4.3- Q1) (Link)

(15.) Priya Sudha, K. S. Tun, Anchal Nahata, M. Gupta & S. Vincent* “Electrochemical characterization of a Novel Mg70Al18Zn6Ca4Y2 low entropy alloy in different aqueous environments”, Metallurgical and Materials Transactions A 52 (2021)  2549–2563 (Impact factor:2.7- Q1)(Link)

(14.) Yogesh Prabhu, S. Vincent, S. Manulal , Adithya Nair, Jatin Bhatt,  "Cu-Zr-Ti-Al Metallic Glass: Thermodynamic Prediction, Synthesis and Biocorrosion Studies", Physica B: Physics of Condensed Matter 609 (2021) 412918.(Impact Factor: 2.9- Q2)(Link)

(13.) Vyasaraj Manakari, S. Kannan, Gururaj Parande, Mrityunjay D, Soumya C, Priya Sudha, S. Vincent,  Manoj Gupta, “In vitro     degradation of hollow silica reinforced Mg nanocomposites in different simulated body          fluids for biomedical application”, Metals, 10(12), (2020), 1583. (Impact Factor: 2.3- Q1) (Link)

(12.) Adithya Pradeep Nair, Yogesh Prabhu, Jasmitha, W.H.Ryu, E. S. Park, Jatin Bhatt & S. Vincent*, “An experimental case study on corrosion characterization of Cu46Zr40Ti8.5Al5.5 metallic glass”, Journal of Non-Crystalline Solids, 524 (2019), 119654 (Impact Factor: 4.4- Q1)(Link)

(11.) N. Pillai, R Karthikeyan, S. Kannan, S.Vincent, "Effect of Cryogenic treatment on VIKING cold working tool steel and development of wear mechanism maps", Procedia Manufacturing26 (2018) 329-342.(Impact Factor: 1.7) (Link)

(10.) Joysurya Basu, S. Vincent,  B. S. Murty, M. J. Kramer, Jatin Bhatt, “Role of polyhedral order in glass to crystal/quasicrystal transition dynamics”, Journal of Non-Crystalline Solids, 471 (2017) 256-263. (Impact Factor: 4.4- Q1) (Link)

(09.) S. Vincent, K.S.N. Satish Idury, Aditya Gokhale, Joysurya Basu, B.S. Murty, Jatin Bhatt, “Icosahedral cluster energetics in Zr₆₀Cu₁₀Al₁₅Ni₁₅ bulk metallic glass and their role on solidification behavior”, Transactions of the Indian Institute of Metals,  68 (2015) 1107-1112. (Impact Factor: 1.4- Q2) (Link)

(08.) S. Vincent, A. Daiwile, S. S. Devi,  M. J. Kramer, M. F. Besser, B. S. Murty, J. Bhatt, “Bio-corrosion and cytotoxicity studies on novel Zr₅₅Co₃₀Ti₁₅ and Cu₆₀Zr₂₀Ti₂₀ metallic glasses”, Metallurgical and Materials Transactions A, 46 (2015) 2422-2430.(Impact Factor: 2.7- Q1) (Link)

(07.) S. Vincent, B. S. Murty, M. J. Kramer, J. Bhatt, “Micro and Nano Indenatation studies on Zr₆₀Cu₁₀Al₁₅Ni₁₅ bulk metallic glass”, Materials and Design, 65 (2015) 98–103. (Impact Factor: 9.4- Q1) (Link)

(06.) S. Vincent, J. Bhatt, B. S. Murty,  “Thermodynamic basis for glass formation in Cu-Zr rich ternary systems and their synthesis by mechanical alloying”, Metallurgical and Materials Transactions A, 45 (2014) 2363–2370.  (Impact Factor: 2.7- Q1) (Link)

(05.) S. Vincent, A. F. Khan, B. S. Murty, J. Bhatt, “Corrosion characterization on melt spun Cu60Zr20Ti20 metallic glass”, Journal of Non-Crystalline Solids, 379 (2013) 48-53. (Impact Factor: 4.4- Q1) (Link)

(04.) B. Ramakrishna Rao, A. S. Gandhi, S. Vincent, J. Bhatt, B. S. Murty, “Prediction of glass forming ability using thermodynamic parameters”, Transactions of the Indian Institute of Metals, 65 (2012) 559-563. (Impact Factor: 1.4- Q2) (Link)

(03.) S. Vincent, B. S. Murty, J. Bhatt, “Prediction of bulk metallic glass formation in Cu–Zr–Ag–Hf system by thermodynamic and topological modeling”, Transactions of the Indian Institute of Metals, 65 (2012) 827-831. (Impact Factor: 1.4- Q2) (Link)

(02.) S. Vincent, Joysurya Basu, B.S. Murty, Jatin Bhatt “Micro indentation study on Cu60Zr20Ti20 metallic glass”, Material Science and Engineering A, 550 (2012) 160–166. (Impact Factor: 6.1- Q1) (Link)

(01.) S. Vincent, D.R. Peshwe, B.S. Murty, Jatin Bhatt, “Thermodynamic prediction of bulk metallic glass forming alloys in ternary Zr–Cu–X (X = Ag, Al, Ti, Ga) systems”, Journal of Non-Crystalline Solids, 357 (2011) 3495–3499.  (Impact Factor: 4.4- Q1) (Link)

Under Review:

Ø Shubhra Shitole, S. Vincent^*, Abdel-Hamid Ismail Mourad, Priya Sudha, Jisha Pillai, Dali Vilma Francis, "Biocorrosion studies of novel Zr‑Co‑Ti based thin-film metallic glass alloys in simulated body fluids and in-vitro cytotoxicity analysis" Under review  (2025)

Ø Juhi Verma, Daffiny Sara Joshua, S. Vincent, Simran Nath, R. Lakshmi Narayan, Jatin Bhatt, "Evaluation of Structural, Mechanical, and Biocompatibility Properties of Zr₄₇Cu₄₀Al₈Ag₅ Bulk Metallic Glass for Biomedical Applications" Under review  (2025)

Ø Sozharajan Balasubramani, Gaurav Jhaa, Ram Karthikeyan, Vincent Shantha Kumar, Rajshree Banrjee, "Investigation of Structural, Mechanical, Electronic and Thermodynamic Properties of Zr Rich Multicomponent Alloy for Bio-Medical applications using First Principles Calculations" Under review  (2025)

Ø Siva Shankar Alla, Mohammad Eskandari, Shristy Jha¹, Pei Ziyu¹, S.  Vincent Shanta Kumar^*, Wook Ha Ryu, Eun Soo Park, Sundeep Mukherjee, "Effect of Ag and Ti Addition on the Deformation and Tribological Behavior of Zr-Co-Al Bulk Metallic Glass" Under review  (2025)

 Conference Publications: (Scopus Indexed)

Ø Mukta Mithra Ra, Angel Arul Jothi, S. Vincent, “Automated Pitting Corrosion Detection of Metallic Glass Using Deep Learning”, IEEE Conference Proceedings, DOI: 10.1109/INNOVA63080.2024.10846993 .  

Ø S. Vincent, B. S. Murty, J. Bhatt, “Thermodynamic criteria for bulk metallic glass formation in Zr Rich quaternary system”, American Institute of Physics: Conference Proceedings, 1447 (2012) 583–584.  (Scopus Indexed Paper)  click here for link

Ø Shresh Kumar, Rebin Anwar, Wookha Ryu, E. S. Park and S. Vincent, "Biocorrosion Evaluation on a Zr-Cu-Ag-Ti Metallic Glass", IOP Conf. Series: Materials Science and Engineering 346 (2018) 012009. (Scopus Indexed Paper)  click here for link

Ø Kiran Thomas, S. Vincent, Dipika Barbadikar, Shresh Kumar, Rebin Anwar, Nevil Fernandes, "Corrosion Characterization in Nickel Plated 110 ksi Low Alloy Steel and Incoloy 925: An Experimental Case Study", IOP Conf. Series: Materials Science and Engineering 346 (2018) 012010. (Scopus Indexed Paper)  click here for link

Ø W Qureshi, S Kannan, S Vincent, N N Eddine, A Muhammed, M Gupta , R. Karthikeyan and V Badari, "Influence of silica nanospheres on corrosion behavior of magnesium matrix syntactic foam",  IOP Conf. Series: Materials Science and Engineering 346 (2018) 012012. (Scopus Indexed Paper) click here for link

Ø Cherish Mani , R Karthikeyan, S Vincent, "A study on corrosion resistance of dissimilar welds between Monel 400 and 316L austenitic stainless steel", IOP Conf. Series: Materials Science and Engineering 346 (2018) 012025. (Scopus Indexed Paper)  click here for link

Ø S Kannan, S Pervaiz, S. Vincent, R. Karthikeyan, "Tool life and surface integrity aspects when drilling nickel alloy", IOP Conf. Series: Materials Science and Engineering 346 (2018) 012042. (Scopus Indexed Paper) click here for link

Ø Dipika R Barbadikar, S. Vincent, Atul R Ballal, Dilip R Peshwe and M D Mathew, "Optimization of BI test parameters to investigate mechanical properties of Grade 92 steel",  IOP Conf. Series: Materials Science and Engineering 346 (2018) 012069. (Scopus Indexed Paper) click here for link

Ø Akshay Gidwani, Siddanth James, Sagar Jagtap, Ram Karthikeyan, S. Vincent, "Effect of Entropy Generation on Wear Mechanics and System Reliability", IOP Conf. Series: Materials Science and Engineering 346 (2018) 012076. (Scopus Indexed Paper)  click here for link

Ø S. Kannan, L Kui, S Pervaiz, S. Vincent, R. Karthiekyan, "Edge profiling of titanium alloys and attainable surface quality", ASME 2018 13th International Manufacturing Science and Engineering Conference, 2  (2018) pp. V002T04A022 (Scopus Indexed Paper) click here for link

Ø Pranay Addepalli   and  S. Vincent, " Computational Fluid Dynamic Analysis on Green Building Materials" Journal of Physics: Conference Series, Volume 1276, (2019) 012056 (Scopus Indexed Paper) click here for link

Ø K. S. Tun, Anchal Nahata, S. Vincent, M. Gupta, “Processing, microstructure and mechanical characterization of a new magnesium based multicomponent alloy”, Materials Today: Proceedings Volume 28, Part 2, 2020, Pages 1044-1047 (Scopus Indexed Paper) click here for link

Ø Sagar Ashvinkumar Padhiar, S. Vincent, “Effect of hard facing processes on Mild steel A-36 by arc welding ”, Materials Today: Proceedings Volume 28, Part 2, 2020, Pages 526-531 (Scopus Indexed Paper) click here for link

Ø M. Arun, S. Vincent, R. Karthikeyan, “Development and characterization of sisal and jute cellulose reinforced polymer composite”, Materials Today: Proceedings Volume 28, Part 2, 2020, Pages 556-561 (Scopus Indexed Paper) click here for link

Ø Yogesh Prabhu , S. Vincent, Jatin Bhatt, “Thermodynamic modelling to optimize glass forming composition in multicomponent Zr-Cu-Co-Al system”, Materials Today: Proceedings Volume 28, Part 2, 2020, Pages 1239-1244 (Scopus Indexed Paper)  click here for link

Ø Adithya Nair; Syed Arafat, Farhan S, S. Vincent, "Corrosion charaterization zinc coated SS304 stainless steel", Materials Today: Proceedings Volume 28, Part 2, 2020, Pages 1210-1215 (Scopus Indexed Paper) click here for link

Student Research Papers:

• Mukta, S. Vincent, Angel Jothi, "Automated Pitting Corrosion Detection of Metallic Glass Using Deep Learning and Computer Vision', 10th Undergraduate Research Competition, Abu Dhabi, UAE, May 2023 (Finalist)
• Asmi, S. Vincent, Angel Jothi.''Predicting Electrochemical Behavior of Alloys Using Machine Learning'', 10th Undergraduate Research Competition, Abu Dhabi, UAE, May 2023 (Finalist)
• Adithya Pradeep Nair & S. Vincent, "Metallic Glass-A Novel Material for Bio-implant Applications", 7th Undergraduate Research Competition, Abu Dhabi University, April 2019, UAE (Finalist)
• Sagar Padhiar & S. Vincent, "Effect of Hard-facing Process on Mild steel A-36 by Arc welding", 7th Undergraduate Research Competition, Abu Dhabi University, April 2019, UAE (Finalist)
• Pranay Adepalli & S. Vincent, "Green Materials for U.A.E houses", 7th Undergraduate Research Competition, Abu Dhabi University, April 2019, UAE (Finalist)
• Shivam Mishra, Rishabh Kaushik & S. Vincent, "Implementing Deep Learning for enhancing the Air Quality", 7th Undergraduate Research Competition, Abu Dhabi University, April 2019, UAE (Finalist)
• Shresh Kumar Mathur, Gayathri & S. Vincent, "Biocorrosion studies on Zr based metallic glasses", 6th Undergraduate Research Competition, Abu Dhabi University, April 2018, UAE (Finalist)
• Yashodhan Nail & S. Vincent, "Analysis and Application of Supercapacitors", 6th Undergraduate Research Competition, Abu Dhabi University, April 2018, UAE (Finalist) 
• H. Gayathri* & S. Vincent, "Investigation on Heat Transfer Fluids used in Concentrating Solar Power Systems", AEIT 2017, Manipal University Dubai, UAE (Best Paper Award)
• K. Nikkhil Raj* & S. Vincent, "Biocorrosion Studies on Bulk Metallic Glasses (BMG) for Bio-Implant Applications", AEIT 2017, Manipal University Dubai, UAE
• Akshay Gidwani*, Kiran Anand Rekha, Siddanth James, Ved Shankar, R. Karthikeyan and S. Vincent, "Effect of Entropy Generation on Wear Mechanics and System Reliability", AEIT 2017, Manipal University Dubai, UAE
• Karan Viraj Singh*  & S. Vincent, "Heat Balance of a Four Cylinder Bi Fuel Engine Running on Gasoline and Compressed Natural Gas", AEIT 2017, Manipal University Dubai, UAE