Feedback

Dr. Nishant Pandya

Associate Professor, Department of Chemical Engineering 

Computer aided molecular design, Computer aided product design, Consequence analysis, Heat Exchanger Networks Design, Materials Science and Engineering, Modeling of Atmospheric dispersion of toxic gases, Process Intensification, Smart Materials

Publications

Publications:
  1. Vyas, P., Pandya, N. Formulating high performance fire- and flame-retardant mortars using novel, in situ alkali-activated inorganic polymeric compositions and mineral fillers. Innov. Infrastruct. Solut. 8, 137 (2023). https://doi.org/10.1007/s41062-023-01101-0
  2. Satwani U., Singh J., Pandya N. (2020) Using Sentiment Analysis to Obtain Plant-Based Ingredient Combinations that Mimic Dairy Cheese. In: Goel N., Hasan S., Kalaichelvi V. (eds) Modelling, Simulation and Intelligent Computing. MoSICom 2020. Lecture Notes in Electrical Engineering, vol 659. Springer, Singapore. https://doi.org/10.1007/978-981-15-4775-1_61
  3. Bharat B Gulyani and Nishant Pandya, “On the Similarity of Area Targets and Shells Targets in Heat Exchanger Networks”, Journal of Physics: Conference Series, IOP Publishing, Volume 1276, Number 1, 012060, 2019, doi:10.1088/1742-6596/1276/1/012060
  4. V. Gerbaud, M. Teles Dos Santos, N. Pandya, J. M. Aubry, Computer aided framework for designing bio-based commodity molecules with enhanced properties, Chemical Engineering Science, Volume 159, pages 177-193, February 2017
  5. M. Teles Dos Santos, J. Heintz, N. Pandya, J. P. Belaud, V. Gerbaud, Development of a Computer-Aided Product Design Tool for Chemicals Derived from Biomass, XXI Brazilian Congress of Chemical Engineering, September 25-29, 2016, Peer-reviewed, Published in Conference Proceedings: ISSN: 21785600 (electronic), Paper #40057
  6. Juliette Heintz, Jean-Pierre Belaud, Nishant Pandya, Moises Teles Dos Santos, Vincent Gerbaud, Computer aided product design tool for sustainable product development, Computers and Chemical Engineering, vol. 71, 2014, pages 362–376. 
  7. Nishant Pandya, Nadine Gabas, Eric Marsden. Uncertainty Analysis of Phats’s Atmospheric Dispersion Model for Two Industrial Use Cases. Chemical Engineering Transactions, vol. 31, page-97, 2013
  8. Nishant Pandya, Nadine Gabas, Eric Marsden. Sensitivity analysis of Phast's atmospheric dispersion model for three toxic materials (nitric oxide, ammonia, chlorine). Journal of Loss Prevention in the Process Industries, Volume 25, Issue 1, January 2012, Pages 20-32. 
  9. In French: Nishant Pandya, Eric Marsden, Nadine Gabas. Analyse de sensibilité de scénarios de rejets accidentels d'ammoniac. Récents Progrès en Génie des Procédés, Numéro 98, 2-910239-72-1, pages 187-1 to 187-6., 2009.
  10. Nishant Pandya, Eric Marsden, Pascal Floquet, Nadine Gabas. Sensitivity analysis of a model for atmospheric dispersion of toxic gases. Computer Aided Chemical Engineering. 2008; Volume 25, pages 1143-1148.
  11. Nishant Pandya, Eric Marsden, Pascal Floquet, Nadine Gabas. Toxic release dispersion modelling with PHAST: parametric sensitivity analysis. Chemical Engineering Transactions. 2008; Volume 13, pages 179-186. 
  
Conference Session Chair / Member of Technical Committee:
  • Dr. Nishant Pandya invited as session chair at 3rd Student Research Colloquium on “Advances in Engineering & IT” on 11th & 12th April, 2018, at the Manipal Academy of Higher Education, Dubai
  • Dr. Nishant Pandya invited as member of International Advisory Committee of International Conference on “Paradigm shift in Chemical engineering education, processes and technology”, IEI, during September 16-17, 2017, Ahmedabad, Gujarat, India
 
Conference Presentations:
  1.  Nishant Pandya, Nadine Gabas, Eric Marsden. Uncertainty Analysis of Phats’s Atmospheric Dispersion Model for Two Industrial Use Cases. 14th International symposium on Loss Prevention and Safety Promotion in the Process Industries, Florence, Italy, May 12-15, 2013.

  2. Gerbaud V., Heintz J., Pandya N., Teles Dos Santos M. Top-down strategy for the design of a green “alkahest” solvent by using computer aided molecular design. Application to glycerol-based agroresource. Green process Engineering, 3 rd International Congress on Green Process Engineering –GPE 2011. December 6-8, 2011, Kuala-Lumpur, Malaysia.
  3. Aubry J.M., Moity L., Molinier V., Benazzouz A., Durand M. Pierlot C., Rataj V. Gerbaud V., Heintz J., Pandya N., Teles Dos Santos M., Mouloungui Z., De Caro P., Thiebaud-Roux S., Alric I., Fabre J.F., Naralingom A., Bergez-Lacoste M., Marion P., Balastre M., A further step towards “green alkahest” through the design and the classification in silico ofnew eco-friendly solvents: application to glycerol-based solvents, 3 rd International Congress on Green Process Engineering – GPE 2011, December 6-8, 2011, Kuala-Lumpur, Malaysia.
  4. Nishant Pandya, Eric Marsden and Nadine Gabas. Comparative Sensitivity Analysis of Representative Toxic Release Scenarios. 13 th International symposium on Loss Prevention and Safety Promotion in the Process Industries, Brugge, Belgium, June 6-9, 2010; Proceedings edited by G. Suter and E. De Rademaeker, volume 1, pages 263-270.
  5. Nishant Pandya, Eric Marsden, Pascal Floquet, Nadine Gabas. Sensitivity analysis of a model for atmospheric dispersion of toxic gases. 18th European Symposium on Computer Aided Process Engineering – ESCAPE 18, June 1-4, 2008, Lyon, France.
  6. Nishant Pandya, Eric Marsden, Pascal Floquet, Nadine Gabas. Toxic release dispersion modelling with PHAST: parametric sensitivity analysis. 3 rd International Conference on Safety & Environment in Process Industry – CISAP3, May 11-14, 2008, Rome, Italy.
  7. In French: Nishant Pandya, Eric Marsden and Nadine Gabas. Modélisation de la dispersion atmosphérique de nuages toxiques et/ou inflammables, Sensibilité paramétrique du logiciel PHAST, Systèmes d’Information, Modélisation, Optimisation et Commande en Génie des Procédés – SIMO’06, October 11-12, 2006, Toulouse, France