Feedback

Prof. Mithun Mondal

Assistant Professor,
Department of Electrical and Electronics Engineering

Condition Monitoring and Diagnostics of Transformers, High Voltage Engineering
Birla Institute of Technology & Science, Pilani
Hyderabad Campus
Jawahar Nagar, Kapra Mandal
Dist.-Medchal-500 078
Telangana, India

International Journals

  1. D. N. Vangapandu, P. Mishra, R. Sarathi, M. T. Nazir, A. Paramane and M. Mondal, "Performance Evaluation of Transformer Mineral Oil Aged Silicone Rubber/BN Nanocomposites,” IEEE Transactions on Dielectrics and Electrical Insulation, 2024.
  2. J. Varun, P. Mishra, B. T. Phung, R. Sarathi, A. Paramane and M. Mondal, “Comparative Damages in RTV Silicone Rubber Exposed to Mineral and Natural Ester Oil,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 31, no. 3, pp. 1490-1498, June 2024.
  3. K. Lakshmi Prasanna and M. Mondal, “Analytical computation of driving point impedance in mutually coupled inhomogeneous ladder networks,” International Journal of Circuit Theory and Applications, vol. 52, no. 4, pp. 1647-1665, 2024.
  4. K. Lakshmi Prasanna, M. Samal, and M. Mondal, “Terminal Measurements-Based Series Capacitance Estimation of Power Transformer Windings Using Frequency Domain Subspace Identification,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-9, 2023.
  5. M. Mondal and J. A. Ramos, “Impedance parameters estimation of an RLCM ladder network using subspace and similarity transformation approach,” IETE Journal of Research, vol. 69, no. 4, pp. 1818–1828, 2023.
  6. M. Paul, P. Mishra, D. N. Vangapandu, M. Mondal, A. Paramane, and M. T. Nazir, “Thermal ageing characteristics of silicone rubber exposed to mineral oil,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 30, no. 6, pp. 2828-2837, Dec. 2023.
  7. M. Paul, P. Mishra, P. Vinod, R. Sarathi, and M. Mondal, “Performance evaluation of gamma ray irradiated silicone rubber nano-micro composites using electrical, thermal, physiochemical and deep learning techniques,” Polymer Composites, vol. 44, no. 2, pp. 1096–1107, 2023.
  8. K. L. Prasanna and M. Mondal, “Analytical formulas for calculating the electrical characteristics of multiparameter arbitrary configurational homogenous ladder networks,” International Journal of Circuit Theory and Applications, vol. 51, no. 6, pp. 2592–2606, 2023.
  9. H. Shrimathi, M. Mondal, and P. Mishra, “Electric stress reduction in polymeric insulators exposed to multi-environmental conditions using a field-grading zinc-oxide microvaristor,” Electric Power Systems Research, vol. 220, p. 109 342, 2023.
  10. H. Shrimathi, M. Mondal, and P. Mishra, “Simulation based electric stress estimation on silicone rubber polymeric insulators under multi-environmental conditions,” Electric Power Systems Research, vol. 214, p. 108 840, 2023.
  11. K. Chivukula, K. Reddy, R. Adusumalli, P. Bonavath, S. Subramaniam, and M. Mondal, “Characterization of environmentally conditioned quartz–cyanate ester composites for radome applications,” Industrial & Engineering Chemistry Research, vol. 61, no. 15, pp. 5158–5169, 2022.
  12. M. Mondal and J. A. Ramos, “Estimation of humidity sensor equivalent circuit parameters utilizing frequency response measurements combined with subspace identification and similarity transformations,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–9, 2021.
  13. M. Mondal and G. B. Kumbhar, “Detection, measurement, and classification of partial discharge in a power transformer: Methods, trends, and future research,” IETE Technical Review, vol. 35, no. 5, pp. 483–493, 2018.
  14. M. Mondal and G. B. Kumbhar, “Generalized analytical formulae to compute electrical characteristics of a homogenous ladder network of the transformer winding,” International Journal of Circuit Theory and Applications, vol. 46, no. 4, pp. 911–925, 2018.
  15. M. Mondal and G. B. Kumbhar, “Partial discharge localization in a power transformer: Methods, trends, and future research,” IETE Technical Review, vol. 34, no. 5, pp. 504–513, 2017.
  16. M. Mondal, G. B. Kumbhar, and S. V. Kulkarni, “Localization of partial discharges inside a transformer winding using a ladder network constructed from terminal measurements,” IEEE Transactions on Power Delivery, vol. 33, no. 3, pp. 1035–1043, 2017.
  17. M. Mondal and G. B. Kumbhar, “A technique based on an archimedean copula for the localization of partial discharge in a transformer winding,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 23, no. 5, pp. 2908–2916, 2016.

International Conferences

  1. M. Samal and M. Mondal, “Power transformer FRA studies using ladder, multi-conductor transmission lines (MTL), circular MTL, and hybrid winding models,” IEEE 8th International Conference for Convergence in Technology (I2CT), pp. 1–6, 2023.
  2. M. Agrawal, S. Gorre, V. D. Naidu, M. Paul, P. Mishra, and M. Mondal, “Performance evaluation of aqueous NaCl diffused silicone rubber nano micro composites for high voltage applications,” IEEE 6th International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), pp. 84–88, 2022.
  3. K. L. Prasanna, M. Mondal, and P. Mishra, “Elimination of mutual inductances from the statespace model of a transformer winding’s ladder network using eigen decomposition,” IEEE 6th International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), pp. 79–83, 2022.
  4. M. Samal and M. Mondal, “Estimation of a disk transformer winding’s ladder network parameters using analytical, FEM, and terminal measurements,” IEEE North Karnataka Subsection Flagship International Conference (NKCon), pp. 1–6, 2022.
  5. H. Shrimathi and M. Mondal, “Electric field and potential distribution evaluation of environmentally polluted 11 KV polymeric outdoor insulators,” 1st International Conference on Power  Electronics and Energy (ICPEE), IEEE, pp. 1–6, 2021.
  6. H. Shrimathi and M. Mondal, “Electric stress minimization in outdoor contaminated polymeric insulators using an appropriate field grading material,” IEEE 18th India Council International Conference (INDICON), pp. 1–6, 2021.
  7. H. Shrimathi and M. Mondal, “Electroquasistatic simulations of wet-dry band polymeric insulator with different field grading zno microvaristor designs,” 5th International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), IEEE, pp. 113–118, 2021.
  8. H. Shrimathi and M. Mondal, “Investigation of uniform and non-uniform water droplets on different configurations of silicon rubber composite insulators subjected to ac electric field stress,” 3rd International Conference on Energy, Power and Environment: Towards Clean Energy Technologies, IEEE, pp. 1–6, 2021.
  9. M. Mondal and G. B. Kumbhar, “A generalized algorithm to compute response of partial discharge in a transformer winding using its equivalent ladder network,” 3rd International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), IEEE, pp. 126–131, 2017.
  10. M. Mondal and G. B. Kumbhar, “A novel technique for partial discharge localization in transformer winding based on archimedean copula,” The 19th International Symposium on High Voltage Engineering, Pilsen, Czech Republic, 2015.
  11. M. Mondal, R. Jarial, S. Ram, and G. Singh, “Design of substation grounding grid using EDSA software,” IEEE Students Conference on Engineering and Systems (SCES), pp. 1–6, 2013.
  12. G. Singh, A. Agarwal, R. K. Jarial, V. Agarwal and M. Mondal, "PLC controlled elevator system," IEEE Students Conference on Engineering and Systems (SCES), Allahabad, India, pp. 1-5, 2013.