1. Sarda Akshay and Digalwar, A. K. (2018), “Performance analysis of vehicle assembly line using discrete event simulation modelling” International Journal of Business Excellence, Vol 14, Issue 2, pp. 240-255. ( SCOPUS Indexed)  
2. Digalwar, A.K. (2018), “Application of Fuzzy TOPSIS for evaluating machining techniques using sustainability metrics”, IOP Conference Series: Materials Science and Engineering, Vol 346, issue 1, pp. 012039.(SCOPUS Indexed)
3. Bhakar, Vikrant, Digalwar, A. K., Sangwan, K.S. (2018), “Sustainability Assessment Framework for Manufacturing Sector–A Conceptual Model”, Procedia CIRP, Vol. 69, Issue 1, pp. 248-253.(SCOPUS Indexed).
4. Sangwan, K.S., Bhakar, Vikrant, Digalwar, A.K.(2018), Sustainability assessment in manufacturing organizations: Development of assessment models” Benchmarking: An International Journal, Vol. 25, Issue 3, pp.994-1027.(SCOPUS Indexed)
5. Bhakar, Vikrant, Digalwar, A.K. and Sangwan, K.S. (2018), “A sustainability assessment framework for cement industry-A case study”, Benchmarking: An International Journal, Vol. 26, No. 2, pp. 470-497. (SCOPUS Indexed)
6. Saraswat, Santosh and Digalwar, A. K. (2018), “Identification of Sustainable Energy Source for Indian Climatic Conditions: A MCDM Approach”, Proceedings of the International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018) 31, December, 2017 – 03, January, 2018, IISc, India
7. Digalwar, A. K., Bedekar, Akshay and Agarwal, Mohit (2018), “System Dynamics Approach for the Assessment of Leanness of Organizations”, IEEE Xplore 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2018), held from 16 to 19 Dec 2018 at Bangkok, Thailand.(SCOPUS Indexed)
8. Sharma Ankur and Digalwar A. K. (2018), “Industry 4.0 Implementation: Evidence from Indian manufacturing industries”, Proceedings of 12^th ISDSI International Conference held at SPJIMR Mumbai during 27-30 Dec. 2018.
9. Bedekar Akshay and Digalwar A.K. (2018), “Identification and Analysis of Social Factors Responsible for Growth of Electrical Vehicles Manufacturing in India”, Proceedings of 12th ISDSI International Conference held at SPJIMR Mumbai during 27-30 Dec. 2018.
10. Rastogi, Arpit, Jain, Shobhit and Digalwar A. K. (2018), “Sustainability Comparison between Electric and Diesel Buses A Case Study”, Proceedings of 12th ISDSI International Conference held at SPJIMR Mumbai during 27-30 Dec. 2018.
11. Saraswat Santosh, Digalwar, A. K. and Yadav, S.S. (2018), “Evaluation of Sustainable Energy Sources in India: A Fuzzy AHP Approach”, Proceedings of 12th ISDSI International Conference held at SPJIMR Mumbai during 27-30 Dec. 2018.
12. Deshpande Pranav, Digalwar A. K. and Digalwar, Mayuri (2018), “Applications of Industrial IoT in Manufacturing Industry for Predictive Maintenance: A Survey”, Proceedings of 12th ISDSI International Conference held at SPJIMR Mumbai during 27-30 Dec. 2018.
13. Samantoroy Premchand and Digalwar, A.K. (2018), “Location Analysis and Layout improvement of Agricultural Warehouse”, Proceedings of 12th ISDSI International Conference held at SPJIMR Mumbai during 27-30 Dec. 2018.
14. Wankhede Sahil and Digalwar, A.K. (2018), “Assessment of Maintenance Improvement using OEE approach: A case of Indian Manufacturing Industry”, Proceedings of 12th ISDSI International Conference held at SPJIMR Mumbai during 27-30 Dec. 2018.

1. Digalwar, A.K., Mundra Nidhi, Tagalpallewar, A. R., Sunnapwar, V. K. (2017), “Roadmap for the implementation of green manufacturing practices in Indian manufacturing industries: An ISM approach, Benchmarking an International Journal, Vol. 24, Issue 5, pp.1386-1399. (Scopus Indexed)  
2.  Digalwar, A. K., Agrawal, Mohit and Shah, Harshal (2017), Modelling the Critical Success Factors for Sustainable Growth of Mining Industry in India”, IUP Journal of Operations Management, Vol. 16, Issue-2, pp. 7-15. ( Indexed in EBSCO and ProQuest)  
3. Goyal, Animesh, Digalwar, A. K. and Gupta Mahesh (2017), “Theory of Constraints + Lean + Six Sigma: A Unified Framework to improve TLS Orientation”, Proceedings of 11^th ISDSI International Conference held at IIM Trichy during 27-30 Dec. 2017.  
4. Digalwar, A. K. and Kannan Govindan (2017), “Application of a Hybrid Decision Making Approach for the Evaluation of Sustainable Supply Chain Practices” Proceedings of 11^th ISDSI International Conference held at IIM Trichy during 27-30 Dec. 2017. 
5. Bathrinath, S and Digalwar, A.K.(2017), “Solving Identical Parallel Machine Scheduling problem using modified multi-objective particle swarm optimization”, Proceedings of 11^th ISDSI International Conference held at IIM Trichy during 27-30 Dec. 2017. 
6. Maheshwari, Shivam and Digalwar, A. K. (2017), “Application of Internet of Things for Lean Practices: A Case of Connected Cars”, Proceedings of 4^th International Conference on Industrial Engineering held at SVNIT Surat during 21-23 December 2017, pp. 1027-32. 
7. Digalwar, A. K. (2017), Application of Fuzzy TOPSIS for evaluating machining techniques using sustainability metrics“ Proceedings of International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017) held at BITS Pilani Dubai campus, Dubai, UAE during 28-29 November, 2017.(SCOPUS Index)

1. “Identifying and ranking green product development factors: An Analytical Hierarchy Process approach”, 57^th National Convention of Indian Institution of Industrial Engineering and 3^rd International Conference on Industrial Engineering, SVNIT Surat, Nov. 26-28, 2015, pp. 423-428.
2. 'Simulation of vehicle assembly lineusing ARENA”, 57^th National Convention of Indian Institution of Industrial Engineering and 3^rd International Conference on Industrial Engineering, SVNIT Surat, Nov. 26-28, 2015, pp. 857-862...
3. "Life cycle assessment of CRT, LCD and LED monitors", Procedia CIRP, Vol. 29, pp. 432-437. (Elsevier Publication, Scopus Indexed)
4. "Interpretive Structural Modeling approach for the development of Electric Vehicle Market in India", Procedia CIRP, Vol 26, Pp. 40-45. (Elsevier Publication, Scopus Indexed)
5. Sustainability Issues in Turning Process: A Study in Indian Machining Industry", Procedia CIRP, Vol. 26, pp. 379-384. (Elsevier Publication, Scopus Indexed)
6. "Modeling the performance measures of world class manufacturing using interpreting structural modeling", Journal of Modelling in Management , 2015, Vol. 10, No.1, pp. 4-22  (Emerald Journal, Indexed in EBSCO, ProQuest, INSPEC).
7.  “Development of Fuzzy PROMETHEE Algorithm for evaluation of Indian World Class Manufacturing Organizations”, International Journal of Services and Operations Management, Vol. xx, No.x, pp.xxx-xxx. (Inderscience Publication, Indexed in SCOPUS) (In Press)
8.  “Strategic Framework for sustainable development of heavy engineering sector in India”, 8^th ISDSI Conference  held in Pune during 2-4 January 2015.
9. Barriers to VMI -FAHP based analysis of VMI stakeholders”, 8^th ISDSI Conference  held in Pune during 2-4 January 2015.
10.  “An Application of TOPSIS for Selection of Machining Parameters From Environmental Impact Perspective”, 8^th ISDSI Conference  held in Pune during 2-4 January 2015.
11. “Development of self assessment model for enterprise sustainability”, Proceedings of National Conference on Sustainable Manufacturing (NCSM-2015), 2-3 January 2015, MNIT Jaipur, pp. 44-52.
    

1. "A Fuzzy AHP Approach for Supplier Selection", Operations and Supply Chain Management : An International Journal, Vol. 7 No.4, pp. 46-53. (Scopus Indexed)

2. "Development and validation of quality management constructs for software industries: an empirical investigation from India", International Journal of Services and Operations Management, 2014, Vol. 17, No.4, pp. 453-478.(Inderscience, Scopus Indexed)

3. “Implementation of Total Productive Maintenance in Manufacturing Industries: A Literature Based Metadata Analysis”, The IUP Journal of Operations Management”, 2014, Vol. 13, No.1, pp. 39-53.(Indexed in EBSCO, ProQuest)

4. "Interpretive structural modelling approach for Sustainable development of electric vehicle market in India", Procedia CIRP, 12th Global Conference on Sustainable Manufacturing. held at Johor Bahru, Malaysia during 22-24 Sept 2014  ( To be Published by Procedia CIRP, Elsevier, Science Direct Journal, Scopus Index)

5. "Sustainability issues in turning process: A study in Indian machining Industry", Procedia CIRP, 12th GCSM  held at Johor Bahru, Malaysia during 22-24 Sept 2014, (To be Published by Procedia CIRP, Elsevier, Science Direct, Scopus Index)

6. "Life cycle assessment of flexible manufacturing system training process”, Proceedings of National Conference on Emerging Trends in Mechanical Engineering held at BNCE, Pusad, During 26-27 March 2014, pp. 1-6. 

1. "Green manufacturing performance measures: an empirical investigation from Indian manufacturing industry:, Measuring Business Excellence, 2013,Vol. 17 No. 4, pp. 59-75. (Emerald Journal, Scopus Indexed)

2. "Value Network Mapping for Productivity Improvement: A Case Study", The IUP Journal of Operations Management, 2013,Vol XII, No. 4, pp. 1-16. (EBSCO, ProQuest Indexed)

3. "Life Cycle Assessment of Smithy Training Process", Procedia Engineering, 2013, Vol. 64, pp. 1267-1275 (Elsevier Publication, Scopus Indexed)

4. “A Fuzzy AHP Approach for Supplier Selection”, Proceedings of 7^th ISDSI and 5^th OSCM Conference held at IMI New Delhi during 28^th-30^th Dec 2013.(Edited by Prof. B.A.Metri)

5. “Sustainability Assessment Model for Machining Process”, Proceedings of 7^th ISDSI and 5^th OSCM Conference held at IMI New Delhi during 28^th-30^th Dec 2013.(Edited by Prof. B.A.Metri)

6. "Development of Fuzzy AHP model for Evaluation of Aggregate Risk in Green Manufacturing", Proceedings of 2nd IIIE conference on Industrial Engineering", Nov. 20-22, 2013, SVNIT Surat, pp.233-236. (Proceedings published by: Excellent Publishing House, New Delhi, ISBN 978-93-83083-37-4).

7. "Selection of pattern material for casting operation using fuzzy PROMETHEE", Proceedings of International Conference on Advanced Engineering Optimization Through Intelligent Techniques, July 1-3, 2013, SVNIT Surat, pp. 238-242.

8. "Analysis of sustainability practices of Indian manufacturing industries: A MCDM approach", Proceedings of International Conference on Advances inMechanical Engineering, May 29-31, 2013, COEP Pune, Maharashtra, India, (Paper ID-ICAME2013 S15/P6)

9.  "Development of organizational and technological performance measures for sustainable manufacturing", Proceedings of International Conference on Management and Business Innovation, May 17-18, 2013, M.N.I.T. Jaipur, pp. 1-4.

10. “Rain water harvesting system for sustainable industrial water use”, Proceedings of National conference on Sustainable Water Resources Planning, Management and Impact of Climate Change (SWRM 2013), April 5-6 2013, BITS Pilani-Hyderabad Campus, pp. 51.

2012

1. “Roadmap for the growth of electric vehicles market in India”, Conference on Technological Advances in Chemical and Environmental Engineering-2012 (TACEE-2012), Organized by Chemical Engineering Department of BITS Pilani during 23-24 March 2012.

2. “Selection of manufacturing system for business sustainability: A MCDM approach”, 25^th AIMTDR 2012 Conference on Innovation for Sustainable Manufacturing,held at Jadhavpur University Kolkata, 14-16 December 2012, pp. 1323-1328.

3. “Life Cycle Assessment of recumbent bicycle” International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2012) held at PEC Kapurthala, 5-7 October 2012, pp. 373-377.

4. "Imperative of sustainability measurement framework for manufacturing industries:, 6^th ISDSI conference on Operational Excellence: A Key for Performance Excellence, held at IBS Hyderabad, 27-29 December 2012, pp. 20-29.

5. “Quality management practices of software industries: An empirical investigation from India”, 6^th ISDSI conference on Operational Excellence: A Key for Performance Excellence, held at IBS Hyderabad, 27-29 December 2012, pp. 132-143.

2011

1. “An overview of existing performance measurement frameworks in the context of world class manufacturing performance measurements”, International Journal of Services and Operations Management, 2011,Vol. 9, No. 1, pp.60-82.

2. "Manufacturing practices from Indian Industries”, International Conference on Industrial Engineering and Operations Management (IEOM-2011), Kuala Lumpur, Malaysia, 22-24 Jan 2011.

3. “Experimental and numerical optimization based approach for fibre reinforcement in rotomolding” , 5^th International Conference on Advances in Mechanical Engineering (ICAME-2011), Organized by Deptt. Of Mechanical Engineering at SVNIT Surat during 6-8 June 2011, pp. 11-15. (Editor of Proceedings: Dr. R. Venkat Rao)

4. “Machine Tool Guideways: research scope and directions”, 2^nd National Conference on Recent Advances in Manufacturing (RAM 2011), Organized by Department of Mechanical Engineering, SVNIT Surat during 15-17 Sept. 2011, pp. 205-211. (Editor of Proceedings: Dr. Shailendra Kumar, Dr. K.P. Desai, Dr. H.K.Raval and Mr. H.K. Dave)

5. “Supplier Partnering for Sustainable Business Development”, International Conference on Sustainable Manufacturing: Issues, trends and Practices, Organized by Mechanical engineering Department of BITS Pilani during 10-12 Nov. 2011, pp. 296-302, (Editors: K S Sangwan, A K Digalwar and Monica Sharma)., Organized by Mechanical engineering Department of BITS Pilani during 10-12 Nov. 2011, pp 379-383.(Editors: K S Sangwan, A K Digalwar and Monica Sharma). 

6. “Power generation and saving from machine tools”, International Conference on Sustainable Manufacturing: Issues, trends and Practices, Organized by Mechanical engineering Department of BITS Pilani during 10-12 Nov. 2011, pp 379-383.(Editors: K S Sangwan, A K Digalwar and Monica Sharma). 

7. “Sustainability Issues and Challenges in Automobile Industry: An Indian Perspective”, International Conference on Sustainable Manufacturing: Issues, trends and Practices, Organized by Mechanical engineering Department of BITS Pilani during 10-12 Nov. 2011, pp 392-396.(Editors: K S Sangwan, A K Digalwar and Monica Sharma).

8. “Role of knowledge management in world class manufacturing: an empirical investigation”, The IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2011), Singapore, 6-9 December 2011, PP. 415-419.

2010

1. “Knowledge management and employee empowerment for manufacturing excellence: An empirical study”, 3^rd International Conference on Advances in Mechanical Engineering (ICAME-2010), Organized by Deptt. Of Mechanical Engineering at SVNIT Surat during 4-6 Jan 2010, pp. 707-712 

2. "Critical success factors for green manufacturing”, 3^rd International Conference on Advances in Mechanical Engineering (ICAME-2010), Organized by Deptt. Of Mechanical Engineering at SVNIT Surat during 4-6 Jan 2010, pp. 666-671. 

3. “Tools and techniques for virtual manufacturing”, Recent Advances in Mechanical Engineering (RAM-2010) organized by Deptt. of Mechanical Engineering of SVNIT Surat during 19-21 July 2010.

4. “Advances in ball screw mechanism”, Recent Advances in Mechanical Engineering (RAM-2010) organized by Deptt. of Mechanical Engineering of SVNIT Surat during 19-21 July 2010.

Pre 2010

1. “Evaluation of world class manufacturing systems: a case of Indian automotive industries”, International Journal of Services and Operations Management,2008, Vol. 4, No.6, pp. 687-708.

2. “Development and Validation of Performance Measures for World Class Manufacturing Practices in India”, Journal of Advanced Manufacturing Systems, 2007,Vol. 6, No.1, pp. 21-38.

3. “Performance measurement framework for world class manufacturing”, International Journal of Applied Management and Technology,2005, Vol. 3, No. 2, pp. 83-101.

4. “Generalized guide lines for Inplant Training” Two day ISTE 4^th State level Convention(Maharashtra –Goa Section) held at B.N.C.E.Pusad

5. ”How to Improve First Year Result : Some Suggestions” One day workshop on First Year Result held at B.N.C.E. Pusad

6. “World-Class Performance Measures for Strategic Advantage”, Proceeding of National Conference on Strategic Imperatives for Indian Corporations, Organized by TITS, Bhiwani, Feb. 14-15,2004.

7. ”Critical Factors and Performance Measures of World-Class Manufacturing”, Proceeding of National Conference on World-Class Manufacturing, organized by B.D.College of Engineering, Sewagram, March 26, 2004.

8. “Key Success Factors for Implementation of World-Class Manufacturing” National Conference on Recent Advances in Mechanical Engineering-README’2004, Mangalore December,1-3, 2004.

9. “Imperatives of New Performance Measurement System for World-Class Manufacturing”, Proceeding of All India Seminar on Emerging Trends in Mechanical Enginering, NIT Kurukshetra, March 29-30, 2005.

10. “Critical Success Factors for World-Class Manufacturing Performance Measurement”, Proceeding of 14^th ISME International Conference on Mechanical Engineering in Knowledge Age, December,12-14, 2005, pp.260-267.

11. “Changing Basis of Performance Measurement”, UGC Refresher Course on Manufacturing Excellence , Dec. 12-31, 2005 at BITS Pilani.

12. “Performance measurement system for green Manufacturing”, Proceeding of National Conference on Environmental Conservation, Sept.1-3, 2006, BITS Pilani, pp.581-589.

13. “Statistical analysis for justification of world-class manufacturing performance measures”, Proceeding of 3rd International Conference  on Quality, Reliability and Infocom Technology Trends and Future Directions (ICQRIT), December,2-4, 2006,held at INSA, New Delhi.

14. “Performance measurement practices of Indian manufacturing companies :an empirical analysis”, 10th SOM Conference, December 21-24, 2006, held at IIM Ahmedabad

15. "Industrial automations and robotics for manufacturing excellence”, National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME-2006), May. 4-5, 2006, held at JNTU College of Engineering, Hyderabad.

16. “Guidelines for implementation of world class manufacturing in Indian manufacturing industries”, National Conference on Emerging Trends in Engineering and Technology: FRONTIER-2007, Dec. 17-18, 2007, held at B.N.College of Engineering, Pusad.

17. "The role of knowledge management in new product development”, XI Annual International Conference of the Society of Operations Management at Symbiosis Institute of Operations Management, Nashik, Dec. 21-23, 2007.

18. “Imperatives of New Performance Measurement System for Green Manufacturing”, Proceeding of First National Conference on MOCT at IMT Nagpur, Feb., 16-17, 2008.

19. "Total quality management in technical education institutions”, National Conference on Innovations in Engineering & Technology (IET 2008), Sept. 15, 2008, Organized by Takniki Shiksha Vidyarthi Parishad in association with Poornima group of colleges, Jaipur.

20. "A comparative analysis of world class manufacturing practices of SMEs and Large Indian manufacturing organizations”, AIMTDR 2008, IIT Chennai, Dec. 17-19, 2008.