33. Ayush Owhal, Mahima Choudhary, Ajay D. Pingale, Sachin U. Belgamwar, Sudeshna Mukherjee, Jitendra Singh Rathore,"Non-cytotoxic zinc/f-graphene nanocomposite for tunable degradation and superior tribo-mechanical properties: Synthesized via modified electro co-deposition route", Materials Today Communications, Volume 34, 2023, 105112,ISSN 2352-4928, https://doi.org/10.1016/j.mtcomm.2022.105112.

32.Harsh Sharma, Ayush Owhal, Diplesh Gautam, Sharad Shrivastava, Jitendra Singh Rathore, Sachin U. Belgamwar, Venkatesh K.P. Rao, “Thermoatomic analysis of monovacancy defected single-walled boron nitride nanotube under quasi-static strain: Insights from molecular dynamics”, Materials Chemistry and Physics,Volume 294,2023,127020,ISSN 0254-0584,

https://doi.org/10.1016/j.matchemphys.2022.127020

31. Katarkar, Anil S; Pingale, Ajay D; Belgamwar, Sachin U; Bhaumik, Swapan, “An experimental study on pool boiling of R-600a on Cu@ Gr composite-coated patterned surfaces” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 40, 2023, Springer Berlin Heidelberg https://doi.org/10.1007/s40430-022-03936-7

30. Majumder, B., Pingale, A.D., Katarkar, A.S. et al. “Pool Boiling Heat Transfer Performance of R-134a on Microporous Al Surfaces Electrodeposited from AlCl3/Urea Ionic Liquid.” J. Engin. Thermophys. 31, 720–736 (2022).

https://doi.org/10.1134/S1810232822040166

29. Biswajit Majumder, Ajay Pingale, Anil Katarkar, Sachin Belgamwar & Swapan Bhaumik (2022) Developing Al@GNPs composite coating for pool boiling applications by combining mechanical milling, screen printing and sintering methods, Advances in Materials and Processing Technologies, 8:sup4, 2110-2121, DOI: 10.1080/2374068X.2022.2036037

28. Ayush Owhal, Ajay Pingale & Sachin Belgamwar (2022) Developing sustainable Zn-MWCNTs composite coatings using electrochemical co-deposition method: Tribological and surface wetting behavior, Advances in Materials and Processing Technologies, 8:sup4, 2142-2155, DOI: 10.1080/2374068X.2022.2035968

27. A. S. Katarkar, A. D. Pingale, S. U. Belgamwar, S. Bhaumik, “An experimental study on pool boiling of R-600a on Cu@Gr composite-coated patterned surfaces,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022. https://doi.org/10.1007/s40430-022-03936-7

26. B. Majumder, A. D. Pingale, A. S. Katarkar, S. U. Belgamwar, and S. Bhaumik, Pool Boiling Heat Transfer Performance of R-134a on Microporous Al Surfaces Electrodeposited from AlCl3/Urea Ionic Liquid, Journal of Engineering Thermophysics, 2022. https://doi.org/10.1134/S1810232822040166

25. Ayush Owhal, Mahima Choudhary; Ajay Pingale; Sachin Belgamwar; Sudeshna Mukherjee; Jitendra Singh Rathore, Non-cytotoxic zinc/f-graphene nanocomposite for tunable degradation and superior tribo-mechanical properties: Synthesized via modified electro co-deposition route, Materials Today Communications (2022). https://doi.org/10.1016/j.mtcomm.2022.105112

24. H. Sharma, A. Owhal, D. Gautam, S. Shrivastava; Dr. J. S. Rathore, S. U. Belgamwar, V. K. P. Rao, Thermoatomic analysis of monovacancy defected single-walled boron nitride nanotube under quasi-static strain: Insights from molecular dynamics, Mat. Chem.and Phy. (2022), https://doi.org/10.1016/j.matchemphys.2022.127020

23. Ajay D. Pingale, Ayush Owhal, Sachin U. Belgamwar, and Jitendra S. Rathore,Co-deposited CuNi@MWCNTs nanocomposites for structural applications: tribo-mechanical and anti-corrosion performances. Vol 100, Iss 6 (2022). Link: https://doi.org/10.1080/00202967.2022.2127512

22. P. Ranjan, A. Owhal, D. Chakrabarti, S. U. Belgamwar, T. Roy, R. Balasubramaniam, Fundamental insights of mechanical polishing on polycrystalline Cu through molecular dynamics simulations, Mater. Today Commun. (2022). Link: https://doi.org/10.1016/j.mtcomm.2022.103980

21. A. Owhal, D. Gautam, S. U. Belgamwar, V. K. P. Rao, Atomistic approach to analyse transportation of water nanodroplet through a vibrating nanochannel: scope in bio-NEMS applications, Mol. Simul. (2022) 1–8. Link: https://doi.org/10.1080/08927022.2022.2052065

20. B. Majumder, A. D. Pingale, A. S. Katarkar, S. U. Belgamwar, S. Bhaumik, Developing Al@GNPs composite coating for pool boiling applications by combining mechanical milling,screen printing and sintering methods, Adv. Mater. Process. Technol. (2022). Link: https://doi.org/10.1080/2374068X.2022.2036037

19. A Owhal, A. D. Pingale, S. U. Belgamwar, Developing sustainable Zn-MWCNTs composite coatings using electrochemical co-deposition method: Tribological and surface wetting behavior, Adv. Mater. Process. Technol. (2022) Link: https://doi.org/10.1080/2374068X.2022.2035968

18. A. S. Katarkar, A. D. Pingale, S. U. Belgamwar, S. Bhaumik, Fabrication of Cu@G composite coatings and their pool boiling performance with R-134a and R-1234yf, .Adv. Mater. Process. Technol. (2022) Link: https://doi.org/10.1080/2374068X.2022.2033046

17. A. Majumder, A. D. Pingale, A. S. Katarkar, S. U. Belgamwar, S. Bhaumik, Enhancement of pool boiling heat transfer of R-134a on microporous Al@GNPs composite coatings, Int. J. Thermophys. (2022). Link: https://doi.org/10.1007/s10765-022-02973-7

16. A. Owhal, A. D. Pingale, S. Khan, S. U. Belgamwar, P. N. Jha, J. S. Rathore, Facile and scalable co-deposition of anti-bacterial Zn@GNS nanocomposite coatings for hospital facilities: Tribo-mechanical and anti-corrosion performances, JOM, (2021). Link: https://doi.org/10.1007/s11837-021-04968-5

15. A.S. Katarkar, A.D. Pingale, S.U. Belgamwar, S. Bhaumik, Experimental study of pool boiling enhancement using a two-step electrodeposited Cu-GNPs nanocomposite porous surface with R-134a, J. Heat Tranf. (2021). Link: https://doi.org/10.1115/1.4052116

14. A. Owhal, A.D. Pingale, S. Khan, S.U. Belgamwar, P.N. Jha, J.S. Rathore,Electro-co-deposited γ-Zn-Ni/Gr composite coatings: Effect of graphene concentrations in the electrolytebath on tribo-mechanical, anti-corrosion and anti-bacterial properties, Trans. IMF (2021). Link: https://doi.org/10.1080/00202967.2021.1979815

13. A.D. Pingale, A. Owhal, S. Belgamwar, J. Rathore, Electrodeposition of CuNi-G nanocomposite coatings by DC, PC and PRC, JOM, (2021). Link: https://doi.org/10.1007/s11837-021-04815-7

12. A.S. Katarkar, A.D. Pingale, S.U. Belgamwar, S. Bhaumik, Effect of GNPs Concentration on the Pool Boiling Performance of R-134a on Cu-GNPs Nanocomposite Coatings Prepared by a Two-Step Electrodeposition Method, Int. J. Thermophys. 42 (2021) 124. Link: https://doi:10.1007/s10765-021-02876-z

11. A. Owhal, M. Choudhary, S.U. Belgamwar, S. Mukherjee, J. S. Rathore, Synthesis, Co-deposited Zn-Cu/Gr nanocomposite: Corrosion behaviour and in vitro cytotoxicity assessment. Trans. IMF (2021). Link: https://doi.org/10.1080/00202967.2021.1899493

10. A.D. Pingale, A. Owhal, S.U. Belgamwar, J.S. Rathore, Electro-co-deposition and properties of Cu-Ni-MWCNTs composite coatings, Trans. IMF. (2021). Link: https://doi:10.1080/00202967.2021.1861848

9. A.D. Pingale, S.U. Belgamwar, J.S. Rathore, A novel approach for facile synthesis of Cu-Ni/GNPs composites with excellent mechanical and tribological properties, Mater. Sci. Eng. B. 260 (2020) 114643. Link: https://doi:10.1016/j.mseb.2020.114643

8. A. D. Pingale, S.U. Belgamwar, J.S. Rathore, Synthesis and characterization of Cu–Ni/Gr nanocomposite coatings by electro-co-deposition method: effect of current density, Bull. Mater. Sci. 43 (2020) 66. Link: https://doi:10.1007/s12034-019-2031-x

7. A. D. Pingale, S.U. Belgamwar, J.S. Rathore, Effect of Graphene Nanoplatelets Addition on the Mechanical, Tribological and Corrosion Properties of Cu–Ni/Gr Nanocomposite Coatings by Electro-co-deposition Method, Trans. Indian Inst. Met. 73 (2020) 99–107. Link: https://doi:10.1007/s12666-019-01807-9

6. A. Owhal, D. Boruah, S.U. Belgamwar, Establishment of an optical trapping curve for prediction of trapping parameters, Optik (Stuttg). 208 (2020) 164434. Link: https://doi:10.1016/j.ijleo.2020.164434

5. R.S. Gunerkar, A.K. Jalan, S.U. Belgamwar, Fault diagnosis of rolling element bearing based on artificial neural network, J. Mech. Sci. Technol. 33 (2019) 505–511. Link: https://doi:10.1007/s12206-019-0103-x

4. P. Puri, V. Kumar, S.U. Belgamwar, N.N. Sharma, Microfluidic Device for Cell Trapping with Carbon Electrodes Using Dielectrophoresis, Biomed. Microdevices. 20 (2018) 102. Link: https://doi:10.1007/s10544-018-0350-0

3. P. Puri, V. Kumar, S.U. Belgamwar, M. Ananthasubramanian, N. N Sharma, Microfluidic platform for dielectrophoretic separation of bio-particles using serpentine microelectrodes, Microsyst. Technol. 25 (2019) 2813–2820. Link: https://doi:10.1007/s00542-018-4174-x

2. A.D. Pingale, C.M. Patil, S.U. Belgamwar, Structure Design and Development of Engine Crankshaft Damper, Int. J. Mech. Eng.5 (2018) 1–8.Link: https://doi:10.14445/23488360/IJME-V5I7P101

1. S.U. Belgamwar, N.N. Sharma, Synergistic electro-co-deposition and molecular mixing for reinforcement of multi-walled carbon nanotube in copper, Mater. Sci. Eng. B. 178 (2013) 1452–1457. Link: https://doi:10.1016/j.mseb.2013.09.006

International Journal Publications (Communicated)

1. D. Gautam, A. Owhal, V. K. P. Rao, S. U. Belgamwar, Atomistic analysis of effect of cholesterol on cancerous membrane protein system: Unfolding and associated resistance stresses under strain, J. Mol. Graph. and Model. (2022). (Under Review)

International Conference Publications

25. Ayush Khaitan, Ayush Owhal, Manikantan R. Nair, Soumili Sahoo, Sachin U. Belgamwar, Saurav Goel, Tribeni Roy,“Characterization of quenched MD simulated porous carbon electrodes for supercapacitors,” Materials Today: Proceedings,2023,ISSN 2214-7853,

https://doi.org/10.1016/j.matpr.2023.01.065.

24. B. Majumder, A. D. Pingale, A. S. Katarkar, S. U. Belgamwar, S. Bhaumik, Fabrication of aluminum coatings via thermal evaporation technique for enhancement of pool boiling performance of R-600a, Mater. Today Proc. (2022). Link: https://doi.org/10.1016/j.matpr.2022.02.553 (Scopus)

23. D. Gautam, A. Owhal, V. K. P. Rao, S. U. Belgamwar, Conformational temporal changes in transmembrane protein using molecular dynamics, ME@75 Res. Front. Conf. at IISC, Bengaluru (2022). (Poster presentation)

22. A. Khaitan, A. Owhal, S. U. Belgamwar, R. R. Mishra, S. Goel, T. Roy, Designing porous electrode structures for supercapacitors using Quenched MD simulations. Mater. Today Proc. (2022). Link: https://doi.org/10.1016/j.matpr.2022.03.726. (Scopus)

21. A.D. Pingale, A. Owhal, A.S. Katarkar, S.U. Belgamwar, Fabrication and tribo-mechanical performance of Cu@Al2O3 composite, Mater. Today Proc. (2022). Link: https://doi.org/10.1016/j.matpr.2022.03.425. (Scopus)

20. A.S. Katarkar, A.D. Pingale, S.U. Belgamwar, S. Bhaumik, Experimental Investigation of Pool BHT Performance of R-141b on Micro/Nano-Porous Copper Coating Prepared by a Two-stage Electrodeposition Method, prepare@u_iei, (2021). Link: https://doi.org/10.36375/prepare_u.iei.a218.

19. A. Owhal, A.D. Pingale, S.U. Belgamwar, J.S. Rathore, A brief manifestation of anti-bacterial nanofiller reinforced coatings against the microbial growth based novel engineering problems, Mater. Today Proc. (2021). Link: https://doi.org/10.1016/j.matpr.2021.07.151 (Scopus)

18. A.D. Pingale, A. Owhal, A.S. Katarkar, S.U. Belgamwar, J.S. Rathore, Recent researches on Cu-Ni alloy matrix composites through electrodeposition and powder metallurgy methods: A review, Mater. Today Proc. (2021). Link: https://doi.org/10.1016/j.matpr.2021.07.145 (Scopus)

17. A.S. Katarkar, A.D. Pingale, S.U. Belgamwar, S. Bhaumik, Experimental investigation of pool boiling heat transfer performance of refrigerant R-134a on differently roughened copper surfaces, Mater. Today Proc. (2021). Link: https://doi:10.1016/j.matpr.2021.06.452. (Scopus)

16. A.D. Pingale, A. Owhal, A.S. Katarkar, S.U. Belgamwar, J.S. Rathore, Facile synthesis of graphene by ultrasonic-assisted electrochemical exfoliation of graphite, Mater. Today Proc. (2020). Link: https://doi:10.1016/j.matpr.2020.10.045. (Scopus)

15. A. Owhal, A.D. Pingale, S.U. Belgamwar, J.S. Rathore, Preparation of novel Zn/Gr MMC using a modified electro-co-deposition method: Microstructural and tribo-mechanical properties, Mater. Today Proc. (2020). Link: https://doi:10.1016/j.matpr.2020.09.459. (Scopus)

14. A.S. Katarkar, B. Majumder, A.D. Pingale, S.U. Belgamwar, S. Bhaumik, A review on the effects of porous coating surfaces on boiling heat transfer, Mater. Today Proc. (2020). Link: https://doi:10.1016/j.matpr.2020.09.744. (Scopus)

13. A.D. Pingale, S.U. Belgamwar, J.S. Rathore, The influence of graphene nanoplatelets (GNPs) addition on the microstructure and mechanical properties of Cu-GNPs composites fabricated by electro-co-deposition and powder metallurgy, Mater. Today Proc. 28 (2020) 2062–2067. Link: https://doi:10.1016/j.matpr.2020.02.728. (Scopus)

12. A.R. Shelke, J. Balwada, S. Sharma, A.D. Pingale, S.U. Belgamwar, J.S. Rathore, Development and characterization of Cu-Gr composite coatings by electro-co-deposition technique, Mater. Today Proc. 28 (2020) 2090–2095. Link: https://doi:10.1016/j.matpr.2020.03.244. (Scopus)

11. S.U. Belgamwar, A.D. Pingale, N. N. Sharma, Investigation on electrical properties of Cu matrix composite reinforced by multi-walled carbon nanotubes, Mater. Today Proc. 18 (2019) 3201–3208. Link: https://doi:10.1016/j.matpr.2019.07.196. (Scopus)

10. T. Bhakat, A. Roy, A. Agarwal, N.N. Sharma, S.U. Belgamwar, Bio-hydrogel for Prolonged Controlled Gastro-retentive Drug Dispenser, in: 2019 IEEE 16th India Counc. Int. Conf., IEEE, 2019: pp. 1–4. Link: https://doi:10.1109/INDICON47234.2019.9028965. (Scopus)

9. T. Bhakat, M. Sarkar, A. Agarwal, N. N. Sharma and S. U. Belgamwar, Role of Thermodynamic Energies on Temperature Stimulated Volume Switching of Upper Volume Phase Transition Temperature (UVPTT) based hydrogel, Advances in Polymer Science and Rubber Technology, IIT Kharagpur, India, September 24-27, 2019.

8. S.U. Belgamwar, N.N. Sharma, Improvisation of mechanical and electrical properties of Cu by reinforcing MWCNT using modified electro-co-deposition process, IOP Conf. Ser. Mater. Sci. Eng. 346 (2018) 012055. Link: https://doi:10.1088/1757-899X/346/1/012055. (Scopus)

7. S.U. Belgamwar, N.N. Sharma, Copper-philic carbon nanotubes, in: AIP Conf. Proc., 2016: p. 020065. Link: https://doi:10.1063/1.4945185. (Scopus)

6. P. Puri, V. Kumar, S. U. Belgamwar, N.N. Sharma“Registration of Cells using Dielectrophoresis in a C-Serpentine channel, (IWNEBD-2018) at Indian Institute of Technology (IIT) Mandi, Himachal Pradesh, India

5. Gunerkar R, Jalan, A. K. and Belgamwar, S.U.(2018), Experimental Study of Rolling Element Bearing with Localized Defect using Response Surface Methodology, ASCADM 2018, pp 74-83.

4. N.N. Sharma, S. U. Belgamwar, “Copper Nanocomposites: A Solution to Depleting Copper Reserves” Proc. of International Conference on Materials for the Future, 2013, Thrissur, Kerala.

3. S. U. Belgamwar, G.S.Avadhani, Niti Nipun Sharma, “Functionalisation of MWCNT in order to improve bonding in Cu/MWCNT composite” Proc. of International conference on emerging Technologies- Micro to Nano 2013, K. K. Birla, BITS Goa , India

2. S.U. Belgamwar, N.N. Sharma, “DISADVANTAGED copper ore to rich copper metal by carbonnanotube reinforcement”, Proc. of national Seminar on Emerging trends in base metal mining in india, The Indian Institute of Metals, Khetri Nagar Chapter, Jan. 19, 2012, Hindustan Copper Limited, Khetri Nagar, India.

1. S.U. Belgamwar, N.N. Sharma, “Cu/Metals Reinforced with Carbon Nanotubes: Value Addition, Technology and Developments”, Proc. of International conference on Opportunities and Challenges for Mineral Industries,The Indian Institute of Metals, Khetri Nagar Chapter, Jan. 17, 2011, Hindustan Copper Limited, Khetri Nagar, India.