Feedback

Dr. Sujan Yenuganti

Assistant Professor, Department of Electrical & Electronics Engineering, BITS Pilani, Pilani Campus

Design and development of sensors using smart materials
Room No: 2210-U, FD-II
Department of Electrical and Electronics Engineering,
Birla Institute of Technology & Science, Pilani- 333031, Rajasthan, India

International Journals

2024

  • C. Pradyna, K.P. Venkatesh, D. Gautham, and Y. Sujan, "Experimental studies on the dynamic response of a piezoelectric-based hemisphere resonator gyroscope, "accepted in the Sensor Review Journal, July, 2024.
  • Y. Chinmay, S. Srinivasulu Raju, and Y. Sujan, "A Tri-axial Resonating Beam MEMS Accelerometer," Journal of Electrical Engineering and Technology, 2024. (https://doi.org/10.1007/s42835-024-01984-8)

2023

  • P. Pandiyan, Y. Sujan, S. Srinivasulu Raju, "Design and simulation of piezoelectric MEMS logic gates," Ferroelectrics, Vol. 602(1), pp: 105–120, 2023.
  • Sujan Yenuganti, S Paliwal, P Mythili, and P Kavitha, "Design and Simulation of Resonance-Based MEMS Viscosity Sensor, "Journal of Computational Electronics, Vol. 23(1), pp. 122-130, 2023.

2022

  • Sujan Yenuganti, S. Paliwal, and P. Mythili, "Non-contact thickness measurement system using a smart cantilever beam," Experimental Techniques, Vol. 47, pp. 1161–1167, 2022. 
  • Sankalp Paliwal and Sujan Yenuganti, "Fabrication and testing of a hall effect based pressure sensor,"  Sensor Review, Vol. 42 (3), pp. 354-564, 2022.

2021

  • Sujan Yenuganti and P Mythili, "Improved energy harvesting from a clamped-clamped microbeam with cavity," Microsystem Technologies, Vol. 27, pp. 2773–2783, 2021.
  • Sankalp Paliwal and Sujan Yenuganti, "A differential hall effect based pressure sensor,"  Journal Electrical Engineering and Technology, Vol. 16, pp. 1119–1129, 2021.
  • N. Naren, Vinay Chamola, Sainath Bitrgunta, Ananthakrishna Chintanpalli, Puneet Mishra, Sujan Yenuganti, and Mohsen Guizani, "IoMT and DNN enabled drone assisted COVID-19 screening and detection frame work for rural areas,"  IEEE Internet of Things Magazine, Vol. 4(2), pp. 4–9, 2021.

2020

  • Sankalp Paliwal and Sujan Yenuganti, "Design and simulation of a digital output MEMS pressure sensor,"  Arabian Journal for Science and Engineering, Vol. 45, pp. 6661–6673, 2020. 

2019

  • Sujan Yenuganti, Chen Zhang, and Haifeng Zhang, "Quartz crystal microbalance for viscosity measurement with temperature self-compensation," Mechatronics, Vol. 59, pp. 189–198, 2019. 
  • Chen Zhang, Sanford H. Siegel, Yenuganti Sujan, and Haifeng Zhang, "Sensitivity analysis of piezo-driven stepped cantilever beams for simultaneous viscosity and density measurement," Smart Materials and Structures journal, Vol. 28(6), pp. 1–11, 2019. 

2018

  • Sujan Yenuganti, Haifeng Zhang, and Chen Zhang, “Langasite crystal based pressure sensor with temperature compensation," Sensors and Actuators: A Physical, Vol. 281, pp. 108–116, 2018.
  • Sohrab Mirzaabedeni, Haifeng Zhang, and Sujan Yenuganti, "Analysis of angular position, dimension, and material of a cantilever piezoelectric energy harvester," Ferroelectrics, Vol. 537(1), pp. 1–19, 2018. 

2017 and earlier

  • Thanh Tuong Pham, Haifeng Zhang, Sujan Yenuganti, Suresh Kaluvan, and John A. Kosinski, “Design, modeling, and experimentation of a piezoelectric pressure sensor based on a thickness shear mode crystal resonator," IEEE Transactions on Industrial Electronics, Vol. 64(11), pp. 8484–8491, 2017. 
  • Sujan Yenuganti, Uma Gandhi, and Umapathy Mangalanathan, “Piezoelectric micro-resonant pressure sensor using aluminum nitride," Journal of  Micro/Nanolithography, MEMS, and MOEMS, Vol. 16 (2), pp. 024501–10, 2017.
  • Y. Sujan, G. Uma, and M. Umapathy, “Design and modeling of a micro-resonant pressure sensor," Microsystem Technologies, Vol. 23(5), pp. 1285–1293, 2017.
  • Y. Sujan, G. Uma, and M. Umapathy, “Micro pressure sensor with three degrees of freedom resonator," Microsystem Technologies journal, Springer publications, Vol. 23(8), pp. 3201-3214, 2017.
  • Y. Sujan, G. Uma, and M. Umapathy, “Design and testing of piezoelectric resonant pressure sensors," Sensors and Actuators: A Physical, Vol. 250, pp. 177–186, 2016.

International Conferences

  • Deepika P, Sukrithi M, Pritham R, Sujan Y, and Pankaj A, "Investigation of a high quality factor plasmonic device with metal-2D nanomaterial-2D structure  for Dengue detection" in proceedings of SPIE Optical Systems Design, April 17–11, 2024, Strasbourg, France.
  • Chinmay Yadav, Sankalp Paliwal, Sujan Yenuganti, and Srinivasulu Raju "Design and simulation of differential pressure sensor," in proceedings of the 16th IEEE International Conference on Sensing Technology (ICST-2023), December 17–20, 2023, Hyderabad, India.
  • S Srinivasulu Raju, Y Sujan, T Niranjan, K Sai Tarun, and B Teja, "Identification of fake Indian currency using deep learning techniques," in proceedings of the IEEE Technology and Engineering Management Conference-Asia Pacific (TEMSCON-ASPAC), December 14–16, 2023, Bengaluru, India.
  • Sankalp Paliwal and Sujan Yenuganti, "Implementation of wired and IoT based wireless transmitters for pressure sensors," in proceedings of 2nd OPJU International  Technology Conference on Emerging Technologies for Sustainable Development (OTCON 2.0), January 2023, Raigarh, Chhattisgarh, India.
  • Sankalp Paliwal and Sujan Yenuganti, "Experimental analysis and optimal control of PZT based cantilever beam using Fuzzy-PID controllers" in proceedings of 3rd IEEE International Conference on Computing, Analytics, and Networks (ICAN-2022), November 18–19, 2022, Chitkara University, Punjab, India.
  • Sujan Yenuganti, “Performance Enhancement in Stainless steel Pressure Sensor”, in proceedings of International Conference on Modelling, Simulation, and Intelligent Computing (MoSICom-2020), January 29–31, 2020, BITS Pilani, Dubai campus, Dubai.

2019 and earlier

  • S Sathiya, B Vasuki and Y Sujan, “Flow rate enhancement foe resonance based liquid pump with 2 DOF resonators”, in proceedings of 7th International Conference on Smart Materials Structures and Systems (ISSS-2014), July 8-11, 2014, IISc, Bangalore, India.
  • Pankaj Shivhare, G Uma, Y Sujan and M. Umapathy, “Sensitivity Improvement of a Silicon Nitride Beam Resonant Pressure Sensor”, in proceedings of International Conference on  MEMS  and  Sensors (ICMEMSS 2014), December 18-20, 2014, Indian  Institute  of  Technology  Madras,  Chennai, India.
  • P Pandiyan, G Uma, M. Umapathy and Y Sujan, “Design and Simulation of Chevron type MEMS Digital to Analog Converters”, in proceedings of International Conference on  MEMS  and  Sensors (ICMEMSS 2014), December 18-20, 2014, Indian  Institute  of  Technology  Madras,  Chennai, India.
  • M Umapathy, Y Sujan and K Suresh, “Piezoelectric based Resonance Displacement sensor”, in proceedings of IEEE Sensors Applications Symposium (SAS-2013), February 19-21, 2013, Galveston, Texas, USA.
  • Y Sujan, B Vasuki, G Uma, M Umapathy, S Harihara Krishnan, “Sensitivity Enhancement of Surface Micromachined Resonant Pressure Sensor”, in proceedings of 6th International Conference on Smart Materials Structures and Systems (ISSS-2012), January 04-07, 2012, IISc, Bangalore, India.
  • Y Sujan, B Vasuki and G Uma, “T-Shaped Resonating Beam Pressure Sensor”, in proceedings of 10th  IEEE International Conference on Semiconductor Electronics (ICSE-2012), September 19-21, 2012, kualalampur, Malaysia.
  • Y Sujan, B Vasuki, G Uma, D Ezhilarasi, K Suresh, “Thickness sensor for Ferromagnetic sheets”, in proceedings of 6th IEEE International Conference on Sensing Technology (ICST-2012), December 18-21, 2012, Kolkata, India.
  • S Harihara Krishnan, D Ezhilarasi, G Uma, M Umapathy, and Y Sujan, “Enhancement of vertical displacement in Electro thermal micro actuator”, in proceedings of 6th International Conference on Smart Materials Structures and Systems (ISSS-2012), January 4–7, 2012, IISc, Bangalore, India.