Evaluated PhD Thesis Titled “Studies on Strength and Durability Aspects of Concrete Made with PSC and Recycled Aggregates” submitted at College of Engineering, Andhra University, Visakhapatnam during First Semester 2023-24.

Evaluated PhD Thesis Titled “Spatio-Temporal Variability of Particulate Matter and Associated Risk Assessment for Kota City, Rajasthan (India)” submitted at Department of Civil Engineering, Rajasthan Technical University, Kota, Rajasthan during First Semester 2023-24.

Evaluated PhD Thesis Titled “Assessment of Geo-Polymer Concrete Incorporating Ceramic Waste” submitted at Department of Civil Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture & Technology, Udaipur, Rajasthan during First Semester 2021-22.

Evaluated PhD Thesis Titled “Removal of Heavy Metals from Waste Water by Adsorption Using Agro Based Adsorbents” submitted at Delhi Technological University, Delhi during Second Semester 2019-20.

Evaluated PhD Thesis Titled “Structural and Green Quotient Evaluation of Existing Buildings using Fuzzy Logic and Green Building Rating Systems” submitted at Uttarakhand Technical University, Dehradun during Second Semester 2017-18.

Evaluated one Ph.D. Thesis titled “Urban air pollution and its effect on Cardiovascular System” submitted at Department of Civil Engineering, M.B.M. Engineering College Jodhpur, Jai Narain Vyas University, Jodhpur (Rajasthan) during First Semester 2017-18 (October 2017).

Evaluated one Ph.D. Thesis titled “An investigation on the use of over-burnt bricks for the construction of low volume roads” submitted at Department of Civil Engineering, National Institute of Technology, Agartala during First Semester 2017-18.

Evaluated one Ph.D. Thesis titled "Assessment of Contaminated Soil & Waste Water due to Industries in Kota City of Rajasthan & Its Phytoremediation" submitted at Department of Civil Engineering, Rajasthan Technical University, Kota, Rajasthan, India during Second Semester 2016-2017

Evaluated one Ph.D. Thesis titled “Studies on Removal of Some Toxic Anionic Dyes and Hexavalent Chromium for Industrial Wastewater Remediation” submitted at Hydro Informatics Engineering Department of Civil Engineering, National Institute of Technology, Agartala during First Semester 2016-17.

Evaluated one Ph.D. Thesis titled “Study on spatial pollutant concentration distribution in the close vicinity of urban roadways intersection and model validation” submitted at Department Civil Engineering, Jamia Millia Islamia, New Delhi during First Semester 2014-15.

Evaluated one Ph.D. Thesis titled “Study of Groundwater Sustainability in Gurgaon District Haryana” submitted at Department of Civil Engineering, Delhi Technological University, Delhi during Second Semester 2012-13.

Evaluated one Ph.D. Thesis titled “Studies for Conversion of Plastic Waste into Fuel” submitted at Department of Civil Engineering, M.B.M. Engineering College Jodhpur, Jai Narain Vyas University, Jodhpur (Rajasthan) during Second Semester 2012-13 (January 2013).

Evaluated one Ph.D. Thesis titled “Studies on the Bio deterioration of Concrete by Marine Algae” submitted at Department of Civil Engineering , Pondicherry Engineering College, Pondicherry University, Pondicherry during Second Semester 2009-10 (March 2010).

Evaluated one Ph.D. Thesis titled “Investigation on Solar Detoxification for Industrial Effluent Treatment Systems” submitted at Department of Civil Engineering, Delhi College of Engineering, University of Delhi during Second Semester 2008-09 (May 2009).

Evaluated one Ph.D. Thesis titled Advanced Modeling Techniques for Optimal Reservoir Operation and Performance Evaluation of an Irrigation System during Second Semester 2004-05 as one of Doctoral Advisory Committee (DAC) member.

Evaluated one Ph.D. Thesis titled Modeling of Adsorption for Wastewater Treatment using- Analytical, -Regression, & -Neural Network Approaches during First Semester 2004-05 as one of Doctoral Advisory Committee (DAC) member.

Evaluated one Ph.D. Thesis titled Flexible Pavement Maintenance System with the Integration of Correlation between Roughness and Distress parameters as one of Doctoral Advisory Committee (DAC) member.