Teaching Assistant (during PostDoc), January 2023-May 2023 and January 2024-May 2024, KAUST, Saudi Arabia
Courses: Advance Stochastic Processes
Teaching Assistant (during PhD), January 2018-May 2022, Indian Institute of Technology Delhi

Undergraduate Courses: Differential equations, Computational methods for differential equations, Calculus

Postgraduate Courses: C programming, Numerical analysis

Teaching Assistant (during PhD) for National Programme on Technology Enhanced Learning (NPTEL) courses

Courses: Matrix Computation and its applications, Scientific computing using MATLAB, Introduction to methods of applied mathematics.

Assistant Professor, ITER, SOA University, Bhubaneswar (Pre PhD)

Fall 2016: Introduction to calculus and analysis (First-Year BTech Students)
Spring 2017: Linear algebra, Complex analysis (Second-Year BTech Students)

Business Analysis and Valuation

Courses Taught

Courses Taught multiple times as IC/Instructor

CHEM F313: INSTRUMENTAL METHODS OF ANALYSIS (theory and lab course CDC)
CHEM F414: BIO AND CHEMICAL SENSORS (Elective offered multiple times)
CHEM F341: CHEMICAL EXPERIMENTATION II (Lab course)
CHEM F343: INORGANIC CHEMISTRY III
CHEM F319: ANALYTICAL CHEMISTRY, (New Discipline Elective offered first time under revised curriculum)
CHEM F312: PHYSICAL CHEMISTRY IV
CHEM C491: SPECIAL PROJECTS
CHEM C411: CHEMICAL EXPERIMENTATION
CHEM C311 CHEMICAL KINETICS
CHEM F366 LABORATORY PROJECT
CHEM F266 STUDY PROJECT
CHEM C231 : Chemistry Project Lab.
CHEM C142: Chemistry II
CHEM C141: Chemistry I
TA C111: Measurement Technique I
BITS C382: Reading Course

Higher Degree (M.Phil) and pre- Ph.D. courses

Biosensors (new course)
Microfluidics for chemical biological analysis (new course)
Bioelectronics (new course)
CHEM G521 : Environmental Chemistry
Research Methodology

Courses Developed

New elective developed under revised curriculum

CHEM F414 Bio and Chemical Sensor

Higher Degree (M.Phil) and pre- Ph.D. courses

Biosensors (new course)
Microfluidics for chemical biological analysis (new course)
Bioelectronics (new course)

Courses

2023-24 (I Semester)

Communications System
Modern Communications Technologies
Communications System (LAB)

2022-23 (II Semester)

Signals and System
Electrical Science

2022-23 (I Semester)

Communications System
Modern Communications Technologies
Wireless and Mobile Communications (WILP)
Communications System (LAB)

2021-22 (II Semester)

Information Theory and Coding
Wireless and Mobile Communications (WILP)
A reading course on "Intelligent Reflecting Surface"

2021-22 (I Semester)

Modern Communication Technologies
Communications Systems

2020-21 (II Semester)

Information Theory and Coding
Electrical Sciences
A reading course on "Probability and ML for Wireless Communication"

2020-21 (I Semester)

Modern Communication Technologies
Digital Communications
Communications System (LAB)
A reading course on "Probability and ML for Wireless Communication"

2019-20 (II Semester)

Information Theory and Coding
Analog Electronics (LAB)
A reading course on "Probability and ML for Wireless Communication"

2019-20 (I Semester)

Communications Systems
Communications Systems (LAB)
Modern Communication Technologies

2018-19 (II semester)

Signals and Systems
Electrical Sciences

Courses

General Biology
Introduction to Bioinformatics
Biomolecular Modeling
Biostatistics and Biomodeling
Biostatistics and Computers in Public Health
Protein and Enzyme Bioengineering

Theory Courses

CHEM F213 : Physical Chemistry II (2024)

Lab/Practical Courses

CHEM F341 : Chemical Experimentation II (2024)

Courses

SEMESTER I

Fundamental of Thermodynamics (BITS F111)
Numerical Methods in Chemical Engineering (CHE F242)
Chemical Engineering Laboratory - II (CEL-II)

SEMESTER II

Statistical and Molecular Thermodynamics (CHE F415)
Chemical Engineering Laboratory - I (CEL-I)

WILP Courses

Process Design Principles
Applied Transport Phenomena

Courses Taught/ Teaching

Teaching at Northeastern University:

I worked as a TA for six years at Northeastern University. During my TA ship I taught regular classes most of the time ( except the first semester when I only worked as a grader and tutorial instructor ). I taught mostly differential equations and linear algebra to engineering students. I have also taught elementary algebra and pre-calculus to business and nursing students.

I taught various undergraduate and graduate level courses in IISER Kolkata, I have taught courses related to, algebra, topology, graph theory, representation theory, geometry.

Teaching at IISER Kolkata

· Group Theory

· Ring Theory

· Representation Theory of Groups and Algebras

· Topology

· Introduction to Algebraic Topology

· Combinatorics

· Calculus –I

· Fundamentals of Mathematics

· Graph Theory

· Number Theory

At BITS-Pilani:

Commutative Algebra
Mathematics II
Ordinary Differential Equations
Probability Statistics
Mathematics I
Algebra I
Algebra II
Number Theory
Game Theory

Courses

Applied Statistical Methods
Probability and Statistics
Statistical Simulation

Courses Taught

First Degree :

Circuits and Signals (Signals & Systems)
Digital Electronics & Computer Organization
Mobile Telecommunication Networks
Data Communication Networks
Digital Electronics & Microprocessors*
Digital Design *
Microprocessor Programming & Interfacing - Via Coursers, EdX,TCSiON,Canvas

Higher Degree :

Embedded System Design*
Real Time Systems
Digital Signal Processing
VLSI Architectures
Advanced VLSI Architectures* (via TP)
Advanced Architecture & Performance Evaluation
Networked Embedded Applications* (via TP)
Parllel and Embedded Architecture*

* Courses Introduced and designed by me.

Certification Courses Taught

IoT Technology & Applications
IoT Communication & Networtking

Laboratory Setup :

Embedded Systems Lab
Microelectronics Lab
Re-configurable Computing Lab
Network Embedded Lab (Funded By GAIL Project)
Remote Embedded Lb

Other Responsibilities in Teaching :

Member of Task Force in Mission 2012 responsible for curriculum redesign & Benchmarking.
Co-ordinator of Cross Campus Departmental Committee for Curriculum Development in 2011-2012 – actively participated in formulating Course Structure for EEE/ENI & ECE
Courseware development for WILP Embedded System Design Course
Program Lead for WILP - MTech Embedded Systems & Microelectronics
Developed IoT PG Certificate Course for WILP
Part of the curricullum re-design for MTech Software Systems

Teaching Experience

	Name of Organization	Designation held	Total Experience (Years)
Experience Prior to Ph.D.	Birla Institute of Tech & Science, Pilani - Pilani Campus	Assistant Lecturer	1.5
Experience during Ph.D.	Birla Institute of Tech & Science, Pilani – Pilani Campus	Lecturer	4.5
Experince after Ph.D.	Birla Institute of Tech & Science, Pilani –Pilani Campus	Assistant Professor	3
	Birla Institute of Tech & Science, Pilani - Goa Campus	Assistant Professor	2
	Birla Institute of Tech & Science, Pilani – KK Birla Goa Campus	Associate Professor	4.5
	Birla Institute of Tech & Science, Pilani – KK Birla Goa Campus	Professor	7.5

Courses Taught

UG Courses

1st Semester 2024-2025

Electronic Instruments and Instrumentation Technology (INSTR F311) Lecture
Electronic Devices (EEE/ECE/INSTR F214) Tutorial
Electronic Instruments and Instrumentation Technology (INSTR F311) Lab

Courses Taught

Derivatives and Risk Management - ECON F354
Financial Risk Analytics and Management - FIN F414

Courses

Natural Drugs

Chemistry of Natural Drugs

Forensic Pharmacy

Modern Pharmaceutical Analytical Techniques

Instrumental Methods of Analysis

Quality Assurance and Regulatory Affairs

Courses

EEE F111 - Electrical Sciences

EEE F215 - Digital Design

MEL G621 – VLSI Design

Courses Taught

Analog IC Design (MEL G632) - (Masters) (4 times)

IC Fabrication Technology (MEL G611) - (Masters) (6 times)

Electronic Devices (ECE/EEE/ENI - F241) - (Bachelors) (2 times)

Microelectronic Circuits (ECE/EEE/ENI - F244) - (Bachelors) (3 times)

Analog Electronics (F341) - (Bachelors) (2 times)

Electrical Science ( EEE F111) - (Bacheolors) (2 times)

Lab - Electronic Devices Simulation Lab

Lab - Electrical and Electronics Circuit Laboratory (F246)

Lab - Digital Design ( EEE F215)

Courses Taught

First Degree Courses

· General Biology

· Microbiology

· Biological Chemistry

· Instrumental Methods of Analysis

· Genetics

· Introduction to Environmental Biotechnology

· Recombinant DNA Technology

· Experiments In Biotechnology

· Cell and Tissue Culture Technology

· Biophysical Chemistry

· Food Biotechnology

· New Venture Creation

· Immunotechnology

Higher Degree Courses

· Environmental Biotechnology And Waste Management

· Microbial Fermentation Technology

· Protein and Enzyme Bioengineering

· Advanced And Applied Microbiology

Courses Taught

Marketing Management

Marketing Research

Digital Marketing

Brand Management

Principles of Management

Courses Taught

Course name	Course code	FD/HD
Advanced Manufacturing Processes	ME F315	FD
Composite Materials and Design	ME F452	FD
Refrigeration & Air Conditioning	ME F461	FD
Vibrations and Control	ME F319	FD
Wokshop Lab	ME F110	FD
Advanced Composites	MST G522	HD
Dynamics and Vibrations	DE G611	HD
Materials Technology & Testing	DE G631	HD
Research Practice	BITS G540	HD

Teaching Experience

#	Designation	Institution	From	To	Classes Taught
1	Professor	Birla Institute of Technology & Sciences Pilani, Pilani Campus, Pilani, Rajasthan	01 Jun.’2021	--	First Degree, Higher Degree
2	Associate Professor		01 Jan.’2016	31 May’2021
3	Associate Professor		01 Feb.’2015	31 Dec.’2015
4	Assistant Professor		01 Aug.’2010	31 Jan.’2015
5	Assistant Professor		01 Jan.’2006	31 Jul.’2010
6	Lecturer		10 Sep.’2004	31 Dec.’2005
7	Lecturer	B.S.A. College of Engineering and Technology, Mathura, Uttar Pradesh	30 Jan.’2003	08 Sep.’2004	MCA, Engineering Graduate
8	Guest Assistant Teacher	Institute of Engineering and Technology, Dr. B.R. Ambedkar University, Agra, Uttar Pradesh	09 Mar.’2002	29 Jan.’2003	Engineering Graduate
9	Guest Teacher	Dau Dayal Institute of Vocational Education, Dr. B.R. Ambedkar University, Agra, Uttar Pradesh	16 Jul.’2000	08 Dec.’2000	Graduate, Post-Graduate
10	Visiting Lecturer	Dehra Dun Institute of Technology, Dehra Dun, Uttarakhand	13 Oct.’1999	14 Jan.’2000	Engineering Graduate
11	Lecturer	Uttaranchal College of Engineering, Dehra Dun, Uttarakhand	10 Aug.’1998	27 Jan.’2000	Engineering Graduate, Engineering Diploma

Technical Experience

In-charge, Information Technology laboratory, Dau Dayal Institute of Vocational Education, Dr. B.R. Ambedkar University, Agra, April-December’2000.
Computer Programmer, Uttaranchal College of Engineering, Dehra Dun, August’1998-January’2000.

Visiting Experience

PS-1 Faculty, Practice School Program of BITS, Wadia Institute of Himalayan Geology, Dehra Dun, May-July’2024.
PS-1 Faculty, Practice School Program of BITS, Survey of India, Dehra Dun, May-July’2024.
PS-1 Faculty, Practice School Program of BITS, Ordinance Factory, Dehra Dun, May-July’2024.
PS-1 Faculty, Practice School Program of BITS, Indian Red Cross Society, Dehra Dun, May-July’2024.
PS-1 Faculty, Practice School Program of BITS, APS Lifetech, Pune, May-July’2019.
PS-1 Faculty, Practice School Program of BITS, Bank of Maharashtra, Pune, May-July’2019.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2018.
PS-1 Faculty, Practice School Program of BITS, CSIR Indian Institute of Petroleum, Dehra Dun, May-July’2018.
PS-1 Faculty, Practice School Program of BITS, Government Irrigation Workshop, Roorkee, May-July’2018.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2017.
PS-1 Faculty, Practice School Program of BITS, Wadia Institute of Himalayan Geology, Dehra Dun, May-July’2017.
PS-1 Faculty, Practice School Program of BITS, CSIR Indian Institute of Petroleum, Dehra Dun, May-July’2017.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2015.
PS-1 Faculty, Practice School Program of BITS, Wadia Institute of Himalayan Geology, Dehra Dun, May-July’2015.
PS-1 Faculty, Practice School Program of BITS, Central Public Work Department, Mussorie, May-July’2015.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2013.
PS-1 Faculty, Practice School Program of BITS, Wadia Institute of Himalayan Geology, Dehra Dun, May-July’2013.
PS-1 Faculty, Practice School Program of BITS, Central Public Work Department, Mussorie, May-July’2013.
PS-1 Faculty, Practice School Program of BITS, National Institute of Hydrology, Roorkee, May-July’2013.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2012.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2011.
PS-1 Faculty, Practice School Program of BITS, Indian Rayon, Veraval, May-July’2010.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2009.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2008.
PS-1 Faculty, Practice School Program of BITS, Nov-Sara (Pvt.) Ltd., Dehra Dun, May-July’2008.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2007.
PS-1 Faculty, Practice School Program of BITS, National Thermal Power Corporation, Simhadri, Vishakhapatnam, May-July’2006.
PS-1 Faculty, Practice School Program of BITS, Indian Institute of Remote Sensing, Dehra Dun, May-July’2005.
DLPD Contact Program of BITS for BS (Software Engineering), Wipro Ltd, Delhi, October’2004-May’2005.

RF Microelectronics

Analog Electronics

Digital Design

Teaching Courses

Operating System (CS F214)
Logic in Computer Science (CS F372)

Teaching

First Semester 2024 - 2025

Analog Electronics
Hardware Software Co-Design

Second Semester 2023 - 2024

Analog Electronics
FPGA based System Design

VLSI Test and Testability

Digital Design

Microelectronic Circuits

Courses Taught

Signal and System
Analog and Digital Communication.
Information Theory
Digital Signal Processing
Telecommunication Switching Networks
Data Communications and Networks
Wireless Communication (Wireless MIMO, OFDM, etc)
Mobile Telecommunications Networks
Satellite Communications
Digital Electronics
Wireless and Mobile Communication

Ph.D. Course

Topics in Analysis

Courses

Here is a sneak preview of the courses I am teaching or have taught in the past at BITS.

1.HSS F222: Introduction to Linguistics:

Difficulty level: Moderate.
Monica's father is from Portugal, and mother is from Germany. Monica was born and brought up in Hyderabad and goes to schools in Hyderabad. Which language do you think Monica would speak, namely Portuguese, German, Telugu, English or Hindi? People of Pandu tribe are called Pandav. People of Raghu tribe are called Raghav. What would you call the people of Yadu tribe? How did you figure out the answer? Someone asks Monica, "What's the time?". Monica say, "Time is the temporal continuum of space". Everyone laughs around her. Why? If these and similar questions excite you, and you are looking for erudite answers to these questions, then this course is for you!

2.HSS F228: Phonetics and Spoken English

Difficulty level: Easy-Moderate.
"Haeo di ya do mayt!" Didn't understand? What if I told you that the statement was made by an Australian person? Still not? What if I told you that he was saying, "How do you do mate". I bet you are able to read the statement in perfect Australian accent now! Does that excite you? Have you struggled to understand what the bloke reading the news on BBC is saying? Are you fascinated by the way Shashi Tharoor and Karan Thapar speak? Do you love the way African American rappers put emphasisssssssss on every word while rapping? Does an argument in commentary box of a world cup cricket match between an Australian, south African and Indian commentator excite you because of all the lovely ways they speak the same language, English? Do you love accents, and want to learn more about how people speak, specially the English language? Then this course is for you.

3.BITS F112: Technical Report Writing

Difficulty level: Easy-Moderate.

Report Writing is the fact of life. It is a necessary evil. But while you may not enjoy writing reports, it does not have to be your weakness as well. In this course we learn various aspects of writing reports, e.g. dividing a manuscript into sections, planning each section, writing in a formal writing style, reporting data, providing citations, etc. But we begin with learning the things you might take for granted, like how to write formal emails, how to critically read things, and how to take down notes.

4.BITS E661: Research Methodology (for PhD candidates)

Difficulty level: Easy-Moderate.

Conducting research is a multiple-task enterprise. It requires planning, running the experiments, observing the data, writing the report and publishing. In this course, we take a look at some of these aspects and learn some practical tips that will ease your process of conducting and reporting the research. It is a general course, it is suitable for researchers from all fields.

5.PHIL C221 / HSS F236: Symbolic Logic

Difficulty level: Difficult.

Language is versatile but ambiguous. If I tell you, "I saw an elephant with a telescope". What do you understand? Did I have the telescope or the elephant? What if instead of speaking in English language, I expressed it as saw[I, elephant{with(telescope)}] or saw[I{with(telescope)}, elephant]. Now does it become clearer? Mathematical notations provide the power to express things elegantly and without ambiguity. In this course, we learn the formalism of symbols as applied to doing logic. Naturally, on the way, we learn the basics of logic as well.

6.HSS F242: Introduction to Phonology

Difficulty level: Moderate-difficult.

Have you ever realized what the difference is between /p/ sound and /b/ sound? They are both produced with the same speech organs, i.e. lips. They are both produced in the same manner, i.e. block the air and then release it. So they are similar. You do not confuse the word 'pack' with the word 'back'. So these sounds may be similar but they not the same. So where is the difference? Every wondered why Japanese words always have a consonant followed by vowel followed by a consonant, then a vowel, and so on (Think of Yamaha, Miyazaki, Nipono, Sushi, Takahashi, Watanabe, Nakamura, Suzuki)? You learn in this course, the idiosyncracies of language, and how what seems like idiosyncracies on the surface, are really rule bound in the deep. Unlike Phonetics and Linguistics, this is a technical course.

Courses in the pipeline:

Introduction to Syntax: This course shall
Introduction to Cognitive Neurosciences

Courses Taught

Undergraduate Level

BITS F110: Engineering Graphics
CE F244: Highway Engineering

Postgraduate Level

CE G536: Traffic Engineering and Safety
CE G543: Traffic Flow Theory
CE G535: Highway Geometric Design
CE G523: Transportation Systems Planning and Management
CE G524: Urban Mass Transit Planning, Operations and Management
CE G565: Transportation Planning
CE G566: Public Transportation
CE G568: Traffic Systems Analysis
CE G573: Road Safety and Accident Analysis

Courses

Courses Taught :-

I have taught several courses during my academic career in BITS, some of these are listed below. Text books and reference material identified by author names (indicated in parenthesis) are provided as an aid in gauging the level at which each course was taught. Many of these courses were taught multiple times. Year and semester wise breakup details have not been maintained.

Physics I : A first course for entering freshmen Covers Mechanics, Waves & Oscillations & Optics. (Resnick Halliday &Walker, also Kleppner & Kolenkov, & also A.P. French, & by H.J. Pain)
Physics II : Electricity & Magnetism (D.J. Griffiths)
Measurement Tech.-I : A 2nd yr 1st sem. Undergrad. Expt. Techniques course.
Modern Physics : A 2nd yr, undergraduate course for Physics Students. (Beisier, Tipler, Eisberg & Resnick)
Thermodynamics : Undergraduate Engineering Science course (Text book by :- Van Wylen, Sonntag & Borgnakke)
Math. Methods of Physics : Partial Diff. equations of Physics and Green functions (C. Harper, & Habermann both published by Prentice Hall )
Complex Analysis : Advanced Elective usually offered by the Maths Dept. for MSc. Maths students. (Churchill,Fisher,Raemmert, Knopp)
Classical Mechanics : A first yr MSc. level course. (Goldstein, Micheal Calkin)
Quantum Mechanics I : A first yr MSc. level course. (Schwabl, Schiff, Bohm etc.)
Quantum Mechanics II : An advanced course offered as an elective (Cohen Tannoudji Vol II, M.E Rose, Greiner, Sakurai, etc.)
Theory of Relativity : Elective Course at the senior undergraduate level. (Richard Mould, Robert Resnick, Foster & Nightingale, Weinberg)
Statistical Mechanics : MSc.-Level one- semester course (Sears & Sallinger + Kerson Huang)
Electromag. Theory I : MSc.-Level one-semester course. (Griffiths, Jackson etc)
Electromag. Theory II : An advanced course offered as an elective. (Jackson, Panofsky & Phillips)
Nuclear Physics : MSc.-Level course. (Blatt & Weisskopf, Feshbach & deShalit, S.M. Wong, Ashok Das & Ferbel, Gladiola Erba etc.)
Quantum Field Theory : M.Sc. level Elective for senior students. (Bjorken & Drell Vol 1, QED by Greiner)
Theoretical Physics : M.Sc Level, Reading Course covering Field Quantization for Senior Students. (Ashok Das).
Classical Electrodynamics Ph.D Level Course for Pre Ph.D Course work. Covers Electrostatics, Magnetostatics Electrodynamics. (J.D. Jackson, Panofsky & Phillips)
Statistical Physics & Applications
Ph.D Level Course for Pre Ph.D Course work. Covers Thermodynamics, Classical & Quantum Statistical Mechanics, Bose Gas & Fermi Gas. (Kerson Huang, Patharia, Landau Lifshitz).
Nuclear Engineering ME Chemical Engg. Level Course. Co-taught (twice in Goa) with Prof. Ponnani who was IC of the course both times. Nuclear Physics part from Nuclear Reactor Engg. 4th Ed. by Samuel Glasstone & Alexander Sesonske.
Modern Physics Lab Taught to 2nd year, 2nd Sem. B5 students during the Pandemic. Prepared videos of experiments and conducted viva’s of students online.
Optics Course for 2nd year students (2 times) Covered Geometrical Optics, Matrix methods for paraxial optics, Interference, Interferometry, Fresnel & Fraunhofer Diffraction, and Polarization. (Ghatak, Hecht)

Courses

Courses that I am teaching presently

Mathematics III (Differential Equations)
Introduction to Topology

The courses that I have taught so far:

Mathematics I (Calculus)
Mathematics II (Linear Algebra and Complex Analysis)
Mathematics III (Differential Equations)
Probability and Statistics
Functional Analysis
Introduction to Topology
Elementary Real Analysis
Measure and Integration

Courses Taught

Undergraduate Level

Mechanics of Solids
Fluid & Solid Mechanics
Transport Phenomena
Geodesy
Transportation Engineering
Design of Reinforced Concrete Structures
Computer Programming
Analysis of Structures

Postgraduate Level

Design of Multistoried Buildings
Fundamentals of System Engineering
CAD in Civil Engineering
Numerical Analysis
Infrastructure Project Management
Construction Management
Prestress Engineering

Subjects

Cognitive Neuroscience

Cognitive Psychology

Neuropsychology

Neuropragmatics

Experimental Pragmatics

Neurolinguistics

General Linguistics

Courses

Reporting and Writing for Media
Technical Report Writing

2024-2025

Semester-1

Optical Communications [EEE G591]
Communication Systems [ECE/EEE F311]

Courses Taught

Machine Learning-BITS-F464

Course Instructor: Harikrishnan N B

Teaching Assistant: Mr. Tanmay Devale, Mr. Param Biyani

Course Duration: August 2022 to December 2022

Credit: 3

No. of students: 60

Course Feedback (Out of 10)

Course Instructor: Harikrishnan N B

Course Duration: Jan 2023- May 2023

Teaching Assistant: Mr. Aditya Amit Bhattacharjee

No. of students: 53 (WILP Course)

Course Feedback (Out of 5)

Digital Design

Course Instructor: Harikrishnan N B

Course Duration: August 2023- December 2023

No. of students: 272

Feedback: DD-2023 (Out of 10)

Brain Inspired Deep Learning

Course Instructor: Harikrishnan N B

Course Duration: Jan 2024-May 2024

No. of students: 80

Feedback: BIDL -2024 (Out of 10)

Previously Taught Courses

EEE F111 - Electrical Sciences (Lecture, Tutorial)

EEE F215 - Digital Design (Tutorial, Laboratory)

EEE F241 - Microprocessors & Interfacing (Tutorial, Laboratory)

EEE F242 - Control Systems (Tutorial)

EEE F311 - Communication Systems (Lecture, Tutorial, Laboratory)

EEE F341 - Analog Electronics (Tutorial, Laboratory)

INSTR F311 - Electronic Instruments & Instrumentation Tech (Tutorial, Laboratory)

INSTR F312 - Transducers & Measurement Systems (Tutorial)

INSTR F343 - Industrial Instrumentation & Control (Lecture, Tutorial)

ECE F416 - Digital Communication (Lecture, Tutorial)

EEE G591 - Optical Communication (Lecture, Tutorial, Lab)

ET/POWAB ZC344 - Instrumentation & Control (WILP course - Regular & Flipped modes)

1st Semester 2024-25

INSTR F311 - Electronics Instruments & Instrumentation Tech

ET ZC344 - Instrumentation & Control

2nd Semester 2023-24

EEE F111 - Electrical Sciences

EEE F241 - Microprocessors & Interfacing

Courses

Courses Delivered

1.	Microelectronic Circuits	B E	4th sem	BITS Hyderabad
2.	Electronic Devices	B E	3rd sem	BITS Hyderabad
3.	Semiconductor Devices	B Tech	3rd sem	IIT Kharagpur
4.	Solid State Devices	B Tech	3rd sem	IIT Hyderabad
5.	Basic Electronics	B Tech	2nd sem	IIT Kharagpur
6.	Device Physics & Modeling	M Tech	1st sem	IIT Kharagpur
7.	Microprocessors & Computer Organization	B Tech	6th sem	IIT Hyderabad
8.	Advanced VLSI Devices	M E	2nd sem	BITS Hyderabad
9.	Advanced VLSI Design	M E	2nd sem	BITS Hyderabad
10.	Analog and Digital VLSI Design	B E	5th sem	BITS Hyderabad
11.	Physics and Modeling of Microelectronic Devices	M E	1st sem	BITS Hyderabad

New Courses Developed

1.	Advanced Nanoscale Devices - Applied to State-of-the Art VLSI	M Tech / Ph D	IIT Kharagpur
2.	Advanced Semiconductor Physics - Applied to State-of-the Art VLSI	M Tech / Ph D	IIT Kharagpur

Courses

Courses related to the specialization Manufacturing/ Production Engineering, namely:

On Campus:

Production Techniques II,
Production Techniques I,
Manufacturing Processes,
Metal Forming and Machining,
Casting and Welding,
Production Planning and Control,
Manufacturing management,
Workshop Practice,
Quality Control, assurance and reliability
Project type courses.

WILP:

Manufacturing Processes,
Production Planning and Control,
Concurrent Engineering.

Courses

Mechanics, Oscillations and Waves
Undergraduate Physics Practical
Introductory course on General Relativity(Elective Course)
QFT in FRW Cosmology(Reading course)
Fluctuation-Dissipation Theorem, Brownian Motion and Basics of Transport Theory(Reading Course)
Statistical Mechanics of Critical Phenomena(Elective Course)
Mathematical Methods in Physics I

Current Semester

Current Semester

Mathematics-III (MATH F211)
Mathematics-I (MATH F111)

Courses Taught

Mathematics-I (MATH F111)
Mathematics-II (MATH F112)
Mathematics-III (MATH F211)
General Mathematics-I (BITS F113)
Numerical Analysis (MATH F313)
Probability and Statistics (MATH F113)
Partial Differential Equations (MATH F343)
Mathematical Methods (MATH F241)
Numerical Solutions to Ordinary Differential Equations (MATH F444)
Numerical Linear Algebra (MATH F425)

Numerical Linear Algebra (MATH F425)
Probability and Statistics (MATH F113)

Numerical Linear Algebra (MATH F425)
Probability and Statistics (MATH F113)

Courses Taught

Mathematics-I (MATH F111)
Mathematics-II (MATH F112)
Mathematics-III (MATH F211)
General Mathematics-I (BITS F113)
Numerical Analysis (MATH F313)
Probability and Statistics (MATH F113)
Partial Differential Equations (MATH F343)
Mathematical Methods (MATH F241)
Numerical Solutions to Ordinary Differential Equations (MATH F444)

Courses Taught

First semester (AY 2024-2025):

Course instructor for General Mathematics-I (BITS F113)
Tutor for Mathematics-I (MATH F111)

2024

PHY F212 (Electromagnetic Theory-I): Instructor [Aug-Dec]

PHY F214 (Electromagnetics and Optics Laboratory): Instructor [Aug-Dec]

PHY F111 (Mechanics, Oscillations and Waves): Instructor in Charge [Jan-May]

PHY F344 (Advanced Physics Laboratory): Instructor [Jan-May]

Machine Learning for Chemical Engineers

Chemical Process Optimization

Chemical Engineering Thermodynamics

Numerical Methods for Chemical Engineers

Advanced Process Control

Environmental Pollution Control

Courses

In BITS-Pilani, Hyderabad Campus

Electromagnetic Fields and Microwave Engineering (ECE F314) (July-Dec 2024)
Electromagnetic Fields and Microwave Engineering Laboratory (ECE F312) (Jan-May 2023)
Antenna Theory and Design (EEE F474) (Jan-May 2022)
RF and Microwave Engineering (July-Dec 2021, July-Dec 2022)
Antenna Theory and Design (Jan-July 2021)
Control Systems (Jan-May 2018,2019 & 2020)
Control Systems Lab (Jan-May 2018, 2019 & 2020)
EM Field and Microwave Engineering (July-Dec 2018, July-Dec 2019, July-Dec 2020)
Introduction to artificial neural networks (July-Dec 2020)
RF Microelectronics (July-Dec 2018, July-Dec 2019 (for working professionals))
Mobile and Personal Communication Lab (Jan-May 2018)

In Veermata Jijabai Technological Institute (VJTI), Mumbai (Autonomous)

Radio Frequency Integrated Circuits (with LAB) (For M.Tech students) (August-November 2016, 2017)

In Vidyavardhini's College of Engineering and Technology (VCET), Vasai Road, Mumbai (Affiliated to University of Mumbai)

Radio Frequency Circuit Design (with LAB) (July-Dec 2012, 2013)
Electromagnetic Wave Theory (Jan-May 2014, 2015, 2016)
Microwave Engineering (with LAB) (July-Dec 2014, 2015, 2016)
Control Systems (with LAB) (July-Dec 2014, 2015)
Antenna and Wave Propagation (with LAB) (Jan-May 2013)
Radio Frequency Modelling and Antenna (with LAB) (July-Dec 2014, 2015, 2016)
Circuits and Transmission Lines (with LAB) (July-Dec 2014, 2015)

Courses taught

PHY-F111 Mechanics Oscillations and Waves

BITS-F111 Thermodynamics

PHY-F417 Experimental Methods of Physics

PHY-F110 Physics Laboratory

PHY-F214 Electricity Magnetism and Optics Laboratory

Courses

Sl. No.	Title of courses taught	Postgraduate or Undergraduate
01	Refrigeration and Air-Conditioning	Postgraduate + Undergraduate
02	Conduction and Radiation Heat Transfer	Postgraduate
03	Thermal Equipment Design	Postgraduate
04	Power Plant Engineering	Undergraduate
05	Engineering Thermodynamics	Undergraduate
06	Quality Control, Assurance and Reliability (WILP)	Undergraduate
07	Statistical Process Control (WILP)	Undergraduate
08	Internal Combustion Engines (Tutorial)	Undergraduate
09	Prime Movers and Fluid Machines (Lab)	Undergraduate
10	Engineering Graphics using Autocad (Lab)	Undergraduate
11	Machine Design and Drawing (Lab)	Undergraduate
12	Workshop Practice (Lab)	Undergraduate

Courses Taught

EEE/ECE F311: Communication Systems
EEE G614: Advanced Wireless Communications

Courses

EEE F111 [Electrical Sciences]

EEE/ECE/INSTR F214 [Electronic Devices]

CS/EEE/ECE/INSTR F215 [Digital Design]

EEE/ECE/INSTR F243 [Signals & Systems]

EEE F246 [Electrical & Electronics circuit Lab (Signals & Systems)]

EEE/ECE/INSTR F341 [Analog electronics]

EEE F426 [Fibre Optics & Optoelectronics]

EEE/ECE F434 [Digital Signal Processing]

ES/EEE/MEL ZG573 [Digital Signal Processing] for WILP^* students

ENGG ZC11 [Electrical & Electronics Technology[ for WILP^* students

(* WILP : Work Integrated Learning Program)

Labs Taken

(1) Digital Design

(2) Digital Signal Processing

(3) Analog Electronics

Professional Training Taken
Successfully completed 2 Weeks Instructor Led Live Online Industrial Training Program On Artificial Intelligence & Machine Learning Using Python held during 10th - 21st January 2022 Finland Labs (A Unit of Revert Technology Pvt. Ltd., New Delhi)

10-days Live online Instructor Led training /Faculty Development Program “Applied Deep Learning in Health Care Data Analysis" from 9^th May to 23^rd May, 2022. Organized by Edux Labs in Association with Mechanica IIT Madras.

Courses

Lecture and Tutorials

EEE G591: Optical Communication

EEE F426: Fiber Optics and Optoelectronics

ECE F341/EEE F341/INSTR F341: Analog Electronics (With Tut)
ECE F314: Electromagnetic Fields and Microwave Engineering (With Tut)
ECE C452: Electromagnetic Fields and Microwave Engineering (With Tut)
ECE C433: Electromagnetic Fields and Waves (With Tut)
EA C415: Introduction to MEMS
BITS F415: Introduction to MEMS
EEE ZG571/ ES ZG571: Optical Communication (WILP)

Laboratory

EEE G591: Optical Communication Lab

ECE F341/EEE F341/INSTR F341: Analog Electronics Lab

ECE F215: Digital Design Lab

ECE F312: Electromagnetic Fields and Microwave Engineering Lab

EEE F246: Electrical and Electronics Circuits Lab

BITS F415: MEMS Laboratory

ECE/EEE F266: Study Project

ECE/EEE F366: Laboratory Project-I

ECE/EEE F367: Laboratory Project-II

ECE/EEE F376: Design Project-I

ECE/EEE F377: Design Project-II

EEE G540: Research Practice

Courses

1. (CS G526) Advanced Algorithms and Complexity (ME) (First Semester 2020, First Semester 2023)

2. (CS F426) Graph Mining (BE) (First Semester 2021)

3. (CS F415) Data Mining (BE) (Second Semester 2021)

4. (CS F111) Computer Programming (BE) (First Semester 2022, Second Semester 2022)

5. (CS F422) Parallel Computing (BE+ME) (First Semester 2022)

6. (BITS F232) Foundation of Data Structures and Algorithms (Summer 2023)

Courses:

Discrete Structures for Computer Science
Data Structures & Algorithms
Advanced Algorithms and Complexity
Foundations of Data Science
Machine Learning
Data Mining
Deep Learning
Information Retrieval
Generative Artificial Intelligence
Software Engineering
Secure Software Engineering

Courses

Digital signal processing
FPGA Based system design
Data Communication and Networking.
Telecommunication Switching System and Networking
Communication system(one semester)
Circuit and Signal
Digital electronics and computer organization
Communication network
VLSI architecture
Analog electronics
Advanced VLSI architecture

Physics

Sem-1 2024-25: PHY F346 Laser Science and Technology

Courses Taught

PHY C131: Physics-1 (Mechanics, waves & optics)
PHY C132: Physics-2 (Electricity and Magnetism)
TAG C 211: Measurement Techniques 1 (MT1-Physics)
PHY C132: Physics-2 (Single session)
PHY C 353: Optical Physics & Applications (Post-graduate)
PHY C 391: Instr. Meth. For Analysis (IMA) (Post-graduate)
PHY C 221: Modern Physics (Post-graduate)
EA C422 : Fiber Optics (Post-graduate – Interdisciplinary)
BITS G620: Advanced Instrumentation Technique (Pre-Ph.D. course)
PHY CXXX: Nonlinear Optics (Pre-Ph.D. course)
PHY F242: Quantum Mechanics-1
PHY F213: Optics
PHY F111: Mechanics, Oscillations and Waves
PHY F212 Electromagnetic Theory -1
PHY F110 Physics Laboratory
PHY F214: ELEC MAGNET & OPTICS LAB

Courses

2019

CS G513 Network Security (2nd Sem, 2018-2019, Single IC, Lecture: 3hrs/week, Practical: 4hours/week, Student count: 35)
CS F303 Computer Networks (2nd Sem, 2018-2019, Co-IC, Lecture: 0hrs/week, Tutorial: 2hrs/week)
SS G514 Object Oriented Analysis and Design (1st Sem, 2019-2020, Single IC, Lecture: 2hrs/week, Practical: 4hours/week, Tutorial: 0hrs/week, Student count: 10)
CS F222 Discrete Structure for Computer Science (1st Sem, 2019-2020, Co-IC, Lecture: 0hrs/week, Practical: 0hrs/week, Tutorial: 2hrs/week)
CS F366: Lab Oriented Project (1st Sem 2019-2020, Student count: 1)

2020

CS G513 Network Security (2nd Sem, 2019-2020, Single IC, Lecture: 3hrs/week, Practical: 4hours/week, Student count: 41)
CS F364 Design and Analysis of Algorithms (2nd Sem, 2019-2020, Co-IC, Lecture: 0hrs/week, Tutorial: 1hr/week, Practical: 0hrs/week)
CS F266: Study Project (2nd Sem, 2019-2020, Student Count: 2)
CS F366: Lab Oriented Project (2nd sem, 2019-2020, Student count: 4)
CS F367 : Lab Oriented Project (2nd Sem, 2019-2020, Student Count: 1)
BITS F421T Thesis (2nd Sem, 2019-2020, Campus Supervisor)
SS G514 Object Oriented Analysis and Design (1st Sem, 2020-2021, Single IC, Lecture: 2hrs/week, Practical: 4hours/week, Tutorial: 0hrs/week, Student count: 10)
CS F342 Computer Architecture (1st Sem, 2020-2021, Co-IC, Lecture: 0hrs/week, Practical: 2hrs/week, Tutorial: 1hr/week)
CS F366 Laboratory Project (1st Sem, 2020-2021, Student Count: 2)
CS 367 Laboratory Project (1st Sem, 2020-2021, Student count: 1)
CS F376 Design Project (1st Sem, 2020-2021, Student Count: 1)

2021

CS G513 Network Security (2nd Sem, 2020-2021, Single IC, Lecture: 3hrs/week, Practical: 2hours/week, Student count: 57)
CS F377 Design Oriented Project (2nd Sem 2020-2021, Student count: 1)
CS F366 Laboratory Project (2nd Sem, 2020-2021, Student Count: 1)
CS F367 Laboratory Project (2nd Sem, 2020-2021, Sudent Count: 1)
CS F491 Special Project (2nd Sem, 2020-2021, Student Count: 2)
BITS F421T Thesis (2nd Sem, 2020-2021, Campus Supervisor)
CS G518 Internet of Things: Design and Development (1st Sem, 2020-2021, Single IC, Lecture: 3hrs/week, Practical: 2hours/week, Tutorial: 0hrs/week, Student count: 5)
CS F342 Computer Architecture (1st Sem, 2021-2022, Co-IC, Lecture: 0hrs/week, Practical: 2hrs/week, Tutorial: 1hr/week),
BIO F266: Study Project (1st Sem, 2021-2022, Co-IC, Student count: 1)
MATH F376 Design Project (1st sem, 2021-2022, Co-IC, Student Count: 1)
CS F366 Lab Project (1st Sem, 2021-2022, Co-IC, Student Count: 1)

2022

CS G513 Network Security (2nd Sem, 2021-2022, Single IC, Lecture: 3hrs/week, Practical: 2hours/week, Student count: 53)

Courses

Introduction to Gender Studies
Ecocriticism
Creative Writing
Critical Analysis of Literature and Film
English Literary Forms and Movements
Comparative Indian Literature
Technical Report Writing

Courses

Chem F211 : Physical Chemistry I

Chem F213 : Physical Chemistry II

Chem F244 : Physical Chemistry III

Chem G541 : Chemical Applications of Group Theory

Chem G553 : Advanced Physical Chemistry

BITS G558 : Electronic Structure Theory

Chem F111 : General Chemistry

Chem F110 : Chemistry Practicals

Ongoing courses

WILP

EEZ G515 Environmental Management Systems

CDC

F313 Separation Processes II

Courses

Security Analysis & Portfolio Management
Econometric Methods
Multinational Finance
Financial Derivatives & Risk Management
Marketing Research Methods
Agricultural Marketing & FPOs

Courses

Courses Taught

Proteins – Structure, Folding and Engineering
Enzymes and their Biotechnological Applications
Advanced Techniques in Biochemistry (discipline specific elective)
Basics of Biochemistry (open elective)
Practicals related to Proteins and Enzymes
Research Methodology (Ph.D course work)
Educational Tours (organization and supervision)

Autumn 2024: Natural Language Processing (CS F429), Database Systems Lab (CS F212)

Spring 2024: Information Retrieval (CS F469), Information Retrieval (S2-23_SSZG537)

Autumn 2023: Information Retrieval (S1-23_SSZG537), Introduction to Computer Programming Lab (CS F111)

Spring 2023: Information Retrieval (S2-22_SSZG537), Database Systems Lab (CS F212)

Autumn 2022: Introduction to Computer Programming Lab (CS F111), Introduction to Object Oriented Programming Lab (CSF213)

I teach several core and elective courses in the department:

Core courses:

CS F303: Computer Networks (Spring 2020, Spring 2021)
CS F372: Operating Systems (Spring 2022, Autumn 2022, Autumn 2024)
CS F213: Object Oriented Programming (Spring 2024)

Elective courses:

BITS F364: Human Computer Interaction (Autumn 2019, Autumn 2020, Spring 2021, Autumn 2022, Autumn 2023)
CS F315: Information and Communication Technologies and Development (ICTD) (Spring 2020, Autumn 2021, Spring 2023)

Courses

Quantum Architecture and Programming - Course and Lab (Jan 2022, Jan 2023, Jan 2024, Aug 2024)
Compiler Construction - Lab (Jan 2022, Jan 2023)
Systems for Machine Learning & Data Science - Course and Lab (Jan 2022, AUg 2024)
Principles of Programming Languages - Course and Lab (Aug 2022)
Computer Architecture - Lab (Aug 2022)

Courses offered

Subject	Offered in	Student’s feedback
CHE F311 Kin. React. Des.	Aug.-Dec-2017	9.17/10
CHE F341 Chem. Eng.Lab-II	Jan-May 2018	5.65/10
CHE F242 Num. Meth. Chem. Eng	Jan-May 2018 Jan-May 2019	7.51/10 9.15/10
CHE G558 Chem. Process Opti.	Aug-Dec 2018 Jan-May 2019 Jan-May 2020 Jan-May 2021	8.7/10 9.42/10 Feedback not Conducted 8.18/10
CHE G523 Math. Meth. in Chem. Eng.	Aug-Dec 2019 Aug-Dec 2020 Aug-Dec 2021 Aug-Dec 2023 *Aug-Dec 2024*	9.97/10 Feedback not Conducted 10/10 9.51/10 *ONGOING*
BITS F111 Thermodynamics	Jan-May 2023	8.59/10
WILP Courses
EEGPC ZG513 Appl. Trans. Phenom.	Aug.-Dec-2017	4.61/5
EEGPC ZG622 Environ Process Eng.	Aug.-Dec-2018 Aug-Dec 2021 Jan-May 2022	4.61/5 4.38/5 4.51/5
ETZC362/PEZC411 Environ. Poll. Control	Aug-Dec 2019	4.72/5
EE ZG511 Environ. Chem.	Aug-Dec 2020	4.72/5
SSTMZG523 Biological Treatment Principals and Design of Wastewater Systems	Aug-Dec 2020	4.75/5
EE ZG514/ SSTM ZG516 Environmental Sampling and Analytical Methods	Jan-May 2021 Aug-Dec 2021 Jan-May 2022 Aug-Dec 2022 Jan-May 2023 Aug-Dec 2023 Jan-May 2024 *Aug-Dec 2024*	4.7/5 4.55/5 4.46/5 4.51/5 4.45/5 4.25/5 4.10/5 *ONGOING*

Teaching

Highway Engineering
Pavement Material Characterization
Rural Road Technology
Rural Infrastructure Planning

Courses

Special operation in Chemical Engineering
Thermodynamics
Separation Processes I
Fluid Mechanics
Reaction Engineering and design (Kinetics and reactor design)
Process Equipment Design
Process Control
Electrochemical Engineering
Transport Phenomena (UG and PG)
Chemical Engineering lab

Courses Taught

Course 01 (Elective) Mathematical Theory of Finite Element Methods: Quick tour to the theory of Distributions and essential elements of Sobolev Spaces, Variational formulation of elliptic boundary value problems, Lax-Milgram theorem, Error estimates, Construction of FE spaces, Polynomial approximations, interpolation errors, Aubin-Nitsche duality argument, Parabolic initial and boundary value problems: Semi-discrete and fully discrete schemes, error estimates.
Course 02 (Ph.D. level) Advance Topics in Functional Analysis and Applications: Theory of Distributions (Test space, Distributions, Basic operations, classification, Distributional derivatives, supports); Convolution ( of functions and of Distribution); Fundamental Solutions; Fourier Transform with properties; Fourier Inversion and Plancherel identity; Schwartz space and Tempered Distributions with applications; Sobolev spaces with properties (absolutely necessary ingredients); Fundamental Solution of Heat Equation.

References:

1. H. Brezis, Functional Analysis, Sobolev Spaces and Partial Differential Equations, Springer Verlag (2010).

2. S. Kesavan, Topics in Functional Analysis and Applications, New Age International (P) Ltd., New Delhi (2015).

3. W. Rudin, Functional Analysis, Tata McGraw-Hill,1974.

Teaching activity

I have been teaching two specialized courses which were designed by me and introduced from second semester of 2020-21.

These courses are: PHY F346 : Laser Science and Technology. This course is open to all Physics and Engineering students.

The second course is PHY F433 : Topics in Nonlinear Optics. This is an elective for Physics students only who have earlier taken the Optics course. This course started a year after the earlier course.

Apart from these two courses, I have been involved in teaching the three physics student labs viz. 1) Electromagnetics and Optics Laboratory, 2) Modern Physics Laboratory and 3) Advanced Physics Laboratory. I have also modified and updated the laboratory manuals of all experiments in the First year Physics Lab, EMO lab, Modern Physics Lab and Advanced Physics Lab, and a few experiments have been replaced by new experiments.

Courses Taught:

Introduction to Data Science
Data Mining
Machine Learning
Advanced Data Mining
Network Security
Operating Systems
Computer Programming

Introduction to Data Science

Data Mining

Machine Learning

Advanced Data Mining

Network Security

Operating Systems

Computer Programming

Introduction to Data Science

Data Mining

Machine Learning

Advanced Data Mining

Network Security

Operating Systems

Computer Programming

Courses

Semester I (Autumn), 2024-25: Pervasive Computing (CS G541), CS&IS, BITS Goa

Semester II (Spring), 2023-24: Computer Programming (CS F111), CS&IS, BITS Goa

Semester II (Spring), 2023-24: Computer Programming Lab (CS F111), CS&IS, BITS Goa

Semester I (Autumn), 2023-24: Pervasive Computing (CS G541), CS&IS, BITS Goa

Semester I (Autumn), 2023-24: Computer Architecture Lab (CS F342), CS&IS, BITS Goa

Semester II (Spring), 2022-23: Human-Computer Interaction (BITS F364), CS&IS, BITS Goa

Semester II (Spring), 2022-23: Operating Systems Tutorial (CS F372), CS&IS, BITS Goa

Semester I (Autumn), 2022-23: Pervasive Computing (CS G541), CS&IS, BITS Goa

Semester II (Spring), 2021-22: Human-Computer Interaction (BITS F364), CS&IS, BITS Goa

Semester II (Spring), 2021-22: Computer Networks Lab (CS F303), CS&IS, BITS Goa

Semester I (Autumn), 2021-22: Pervasive Computing (CS G541), CS&IS, BITS Goa

Teaching

Click here for my teaching interest and courses

Courses offered

HSS F317 Introduction to Globalization
GS F332 Contemporary India
SAN G513 Sanitation Governance, Behavioural Change and Advocacy
HSS F371 Cities- Life, Issues and Conflict
BITS F112 Technical Report Writing
GS F231 Dynamics of Social Change

Teaching

Chemical Process Calculation (On Campus)- CHE F211

Chemical Process Calculation (WILP) - PE ZC 321

Chemical Engineering Laboratory (On Campus)

Environmental Chemistry (WILP) - EEZG511

Research Methodology(On Campus)-BITS G661

Electrochemical Engineering - CHE G556

Teaching

Teaching:

UG Courses: Immunology, General Biology, Microbiology, Food Biotechnology

Lab Courses: Biology Laboratory, Experimental Techniques, Microbiology

PG Courses: Molecular Immunology, Stem cell Biology, Animal Cell Technology, Cancer Biology

Project Courses:

Research Practice 1, Research Practice 11, Reading Course, Lab Oriented Project, DOP,SOP, COP, Study in Advanced Topics (SAT).

Goa University Freshers course in Biotechnology, Dec 2023.

WILP Teaching For BIOCON Academy: Industrial Microbiology (2016,2017&2018)

TP Classes for Immunology to Dubai Campus and Goa Campus(2017)

PS 1: 2010 (10 students) Funskool India Ltd., Goa and Zuari Industries, Goa

PS 1:2015 (10 students) Funskool India Ltd., Cartini Pvt.Ltd., Goa

Courses Taught

Financial Management

Financial Analysis and Risk Management

Fundamentals of Finance and Accounting

Security Analysis and Portfolio Management

Principles of Management

Courses taught/teaching

Fundamental Courses:
Mathematics I (MATH F111 - Multivariable Calculus)
Mathematics II (MATH F112 - Linear Algebra and Complex variables)
Probability & Statistics (MATH F113)
Mathematics III (MATH F211 - Differential Equations)

Compulsory Disciplinary Courses:
Elementary Real Analysis (MATH F214)
Mathematical Methods (MATH F241)
Operations Research (MATH F242)
Numerical Analysis (MATH F313)

Discipline Elective Courses:
Mathematical Modeling (MATH F420)

WILP Courses:

Engineering Mathematics – I (MATH ZC161)
Calculus (MATH ZC233 / PE ZC233)

Courses

1. Database Systems

2. Theory of Computation

3. Advanced Compilation Techniques

4. Object Oriented Analysis and Design

5. Distributed Database Systems

6. Computer Programming in C

7. Structure of Programming Languages

8. Object Oriented Programming

9. Database Security

10. Object Oriented Analysis and Design

11. Compiler Construction

12. Principles of Programming languages

Courses in the Current Semester:

1. Theory of Computation (CS F351)- IC.

2. Principles of Programming Languages (CS F301) - Instructor for two Tutorial Section.

Courses

Advance Mechanics of Solids
Mechanisms and Robotics
Mechatronics, Dynamics and Vibrations
Kinematics and Dynamics of Machines
Advance Mechanics of Solids and Kinematics of Machines
Vibrations, Mechanics of Solids

Courses Taught

First Degree Courses

BIO F111: GENERAL BIOLOGY (Previously BIO C111)

BIO F 212: MICROBIOLOGY (Previously BIO C212)

BIO C322: ECOLOGY (Previously BIO C322)

BIO F342: IMMUNOLOGY (Previously C 416)

BIO F244: INSTRUMENTAL METHODS OF ANALYSIS (Previously C391)

BIO C 231: BIOLOGY PROJECT LABORATORY

TA C211: MEASUREMENT TECHNIQUES 1(Biology)

BIO F 110: BIOLOGY LABORATORY

BIOT F 424: FOOD BIOTECHNOLOGY

BITS F 225: ENVIRONMENTAL STUDIES

Higher Degree Courses

BIO G514: MOLECULAR IMMUNOLOGY

BIO G523: ADVANCED APPLIED MICROBIOLOGY

BIO G513: MICROBIAL FERMENTATION TECHNOLOGY

BIO G651: PROTEIN AND ENZYME ENGINEERING

Project Based Courses

BITS C313; BITS C314: LABORATORY ORIENTED PROJECT

BITS C323; BITS C324: STUDY ORIENTED PROJECT

BITS C382: READING COURSE

BITS G620; PROFESSIONAL PRACTICE I

BITS G621; PROFESSIONAL PRACTICE II

BITS G540 RESEARCH PRACTICE

BITS C421T THESIS

BITS 629T DISSERTATION

New Course Developed

Fuel Cell Science and Technology (ME F414): This course is designed to provide the in-depth understanding about the theoretical and practical aspects of the fuel cell technology. Different aspects of the fuel cell viz. fuel cell thermodynamics, electrochemistry, charge transport, mass transport and heat transfer are covered in this course.

Teaching

Engineering Graphics
Surveying
Green Buildings and Energy Conservation
Construction Planning and Technology
Principles of GIS
Civil Engineering Materials
Humanities and Design
Measurement Techniques II

Courses

B.E. and M.Sc. Biological Sciences Programmes

General Biology

Biology Laboratory

Animal Physiology

Genetics

Genomics

Molecular Biology of the Cell

Instrumental Methods of Analysis

M.E. Biotechnology Programme

Molecular Mechanisms of Gene Expression

Genetic Engineering

Human Genetics

Recent Developments in Biology

Stem cells and Regenerative Biology

Biostatistics and Biomodelling

Teaching

Multidisciplinary and physics courses at the undergraduate level (B. E. / M. Sc. students).
Promoted classroom demonstration experiments for the courses.
• Mechanics, oscillations and waves
• Electronic devices
• Thermodynamics
• Electromagnetic theory
• Mechanics, oscillations and waves Lab
• Solid State Physics
• Physics of Semiconductor Devices
• Atomic and molecular physics
• Electricity and Magnetism Lab
• Modern Physics Lab
• Advanced Physics Lab

Courses Taught

1. Thermodynamics (BITS F111)
2. Applied Thermodynamics (ME F214)
3. Prime Movers and Fluid Machines (ME F341)
4. Transport Phenomena (CE F212)
5. Renewable Energy (BITS F462)
6. Fuel Cell Science and Technology (ME F414)
7. Non-destructive Testing Techniques (MST G511)
8. Computer Aided Design (ME F342)
9. Computational Fluid Dynamics (ME G515)
10. Computer Aided Analysis and Design (ME G611)
11. Mechanical Engineering Lab (ME F215)
12. Research Practice (BITS G540)

Courses Taught

Highway Engineering

Civil Engineering Materials

Applications of AI in Civil Engineering

Engineering Graphics

Engineering Hydrology

Courses Taught

Theory Courses

PHYC131 Physics 1(Old Curriculum)
PHYC132 Physics 2(Old Curriculum)
TA GC252 Computer Programming 2(Old Curriculum)
PHY C311 Electromagnetic theory 1(Old Curriculum)
MATH C222 Discrete structures in Computer science(few lectures in a shared multi session course, Tut)(Old Curriculum)
PHY C 321 Quantum Mechanics 1(Old Curriculum)
PHY C421 Quantum mechanics II (Old Curriculum)
PHY F213 Optics
PHY F420 Quantum Optics(Shared with another instructor)
PHY F212 Electromagnetic theory-1 (common for PHY, EEE, INSTR &CHE)
PHY F421 Advanced Quantum Mechanics(Shared with another instructor)
PHY F412 Introduction to Quantum Field Theory
MATH F211 Mathematics-III
PHY F315 Theory of Relativity
PHY F243 Mathematical methods in Physics
PHY F241 Electromagnetic theory-2
PHY F345 Quantum Mechanics for Engineers
PHY G513 Classical electrodynamics
BITS F111 Thermodynamics(Tutorials)
PHY G514 Quantum theory and applications

Lab Courses

PHY C391 IMA (Old curriculum )
TA GC211 Measurement Techniques-1(Old Curriculum)
Physics Lab 1(Mechanics and Waves)
Physics Lab2(Optics, Electricity and Magnetism)
Physics Lab3 (Modern Physics lab)

Project Courses

BITS C323/324 SOP
Physics Project Lab
PHY F376 Design Project
PHY F376 Study Project

Courses Developed

PHY F420 Quantum Optics (with Prof. Radhika Vatsan)
PHY F345 Quantum Mechanics for Engineers

Courses taught

BITS F111 - Themrodynamics
BITS F110 - Engineering Graphics
ME F217 - Applied Themrodynamics
ME F341 - Prime Movers and Fluid Machines
HSS F334 - Srimad Bhagavad Gita

Courses

Advanced Engineering Mathematics (ME G535)
Dynamics and Vibration (DE G611)
Vibration and Control (ME F319)
Engineering Graphics (BITS F110)

Teaching interests

Disaster management

Leadership in Emergency management

Decentralization and development

Local governance

Sociology

Human Geography

Courses offered in BITS Pilani Goa campus

BITS F112: Technical Report Writing

GS F231: Dynamics of Social Change

HSS F362: Local Governance and Participation

HSS F363: Disaster and Development

Courses taught in other universities

Physical Geography, Human Geography and Population Geography to under graduate students

Geomorphology to MSc students

Learning History through Maps to MA students

Country and Town Planning to B.Tech. Civil engineering students

Teaching

Advanced Computer Architecture (CS G524) [Theory and Lab.], 2024, 2023, 2022, 2021, 2020.
Computer Architecture (CS F342) [Theory and Lab.], 2024, 2023, 2022, 2021, 2020.
Microprocessor Programming and Interfacing (CS F241) [Tutorial and Lab.], 2023, 2022, 2021.

Courses Taught

TEACHING EXPERIENCE:

Year

Semester-I

Semester-II

2023-2024

CHE F613: Advanced Mass Transfer

CHE F244: Separation Processes-I

CHE F413: Process Plant Safety

2022-2023

CHE F613: Advanced Mass Transfer

CHE F244: Separation Processes-I

CHE F413: Process Plant Safety

2021-2022

CHE F212: Fluid Mechanics

CHE F613: Advanced Mass Transfer

CHE F244: Separation Processes-I

CHE F413: Process Plant Safety

2020-2021

CHE F212: Fluid Mechanics

CHE F613: Advanced Mass Transfer

CHE F244: Separation Processes-I

CHE F413: Process Plant Safety

2019-2020

CHE F212: Fluid Mechanics

CHE F613: Advanced Mass Transfer

CHE F244: Separation Processes-I

CHE F413: Process Plant Safety

2018-2019

CHE F342: Process Dynamics & Control

CHE F471: Advanced Process Control

CHE F244: Separation Processes-I

CHE F413: Process Plant Safety

2017-2018

CHE F212: Fluid Mechanics

CHE C473: Advanced Process Control

CHE F244: Separation Processes-I

CHE F413: Process Plant Safety

2016-2017

CHE F212: Fluid Mechanics

CHE C473: Advanced Process Control

CHE F244: Separation Processes-I

CHE F342: Process Dynamics & Control

2015-2016

CHE F212: Fluid Mechanics

CHE C473/F471 & INSTR F413: Advanced Process Control

CHE F244: Separation Processes-I

CHE F342: Process Dynamics & Control

2014-2015

CHE F212: Fluid Mechanics

CHE C473/F471 & INSTR F413: Advanced Process Control

CHE C441: Process Control

CHE C473/F471 & INSTR F413: Advanced Process Control

CHE F342: Process Dynamics & Control

2013-2014

CHE C361: Mass Transfer Operations

CHE C473: Advanced Process Control

BITS C313/ 314: Lab Oriented Project

CHE F244: Separation Processes-I

CHE F342: Process Dynamics & Control

BITS C313/ 314: Lab Oriented Project

2012-2013

CHE C361: Mass Transfer Operations

CHE C473: Advanced Process Control

BITS C313/ 314: Lab Oriented Project

CHE F244: Separation Processes-I

CHE C441: Process Control

BITS C313/ 314: Lab Oriented Project

2011-2012

CHE C361: Mass Transfer Operations

CHE G541: Process Plant Simulation

BITS C313/ 314: Lab Oriented Project

CHE G541: Process Plant Simulation

CHE C441: Process Control

BITS C313/ 314: Lab Oriented Project

2010-2011

CHE C361: Mass Transfer Operations

CHE C473: Advanced Process Control

CHE C322: Chemical Process Technology

CHE C441: Process Control

2009-2010

CHE C432: Computer Aided Process Plant Design

CHE C473: Advanced Process Control

CHE C432: Computer Aided Process Plant Design

CHE C441: Process Control

TA C222: Measurement Techniques-II

2008-2009

CHE C431: Select Che. Engineering Lab

409352: Project Costing & Appraisal

CHE C322: Chemical Process Technology

2007-2008

Fundamental of Chemical Engineering

Environmental Engineering

Transport Phenomena

2006-2007

Fundamental of Chemical Engineering

Courses

Undergraduate Engineering courses ( For B.E. hons. Programme)

Object Oriented Programming
Digital Design
Digital Electronics & Computer Organisation
Microprocessors Programming & Interfacing
Analog Electronics
Analog & Digital VLSI Design
Transducers & Measurement Systems
Electronic Instruments and Instrumentation Technology
Digital Electronics and Microprocessors
Computer Programming-I
Measurement Techniques-II

Project type courses

SOP/DOP/LOP to CS/ECE/EEE/INSTR students
On-campus/Off campus thesis

Post Graduate Engineering Courses (For M.E. Microelectronics/M.E. Embedded Systems Programme)

VLSI Design
Device Drivers
Research Practice (RP)

Work Integrated Learning Programme (WILP) On-Line/ Video Lectures (For M.S.Programme)

Embedded Systems Design
Digital Electronics & Microprocessors
Electronics Technology

Courses

Courses taught so far

Classical Mechanics - (for MSc students)
Electromagnetic theory - II (2nd course of EMT for MSc students)
Statistical mechanics (Introductory course for MSc students)
Computational Physics (for MSc. students)
Nonlinear dynamics (Introductory elective course taught from Strogatz)
Modern physics (covers relativity, introductory wave mechanics)
Theoretical Neursocience (an elective course based on book by Dayan and Abbott)
Neural networks (an elective taught from Zurada for all science and engg students)
Mechanics, oscillations and waves (taught from Kleppner & French) for all science & engg students)
Physics - II (1st course in EMT for all science & engg students )
Structure and properties of matter
Measurement technique - 1 (Lab course for all science and engg students)
Physics Lab - 1 (Lab course for all science and engg students)
Instrumental method of analysis (Lab course for MSc)

Courses teaching this semester

Classical Mechanics
Physics Lab-1

Courses

FIRST DEGREE

HIGHER DEGREE

Research Methodology - 1 BITS G661

Research Practice BITS G540

WORK INTEGRATED LEARNING PROGRAMME (WILP)

Year	Semester I	Semester II
2013-2014	Microfluidics and its applications BITS F417	Introduction to Nanoscience and Nanotechnology CHE G528
	Environmental Pollution Control ETZC362	Environmental Pollution Control ETZC362
	Chemical Engineering Laboratory–I (LAB) CHE F312
	Chemical Process Calculations CHE F211/CHE 221

2014-2015	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Environmental Pollution Control (POWJSZC411) (Aditya Birla, Essar & Tata Power)	Physico Chemical Treatment Processes & Design of Wastewater Systems (GSPCB) EE*ZG521

2015-2016	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Applied Transport Phenomena (GSPCB) EE*ZG513	Chemical Engineering Laboratory - II (LAB) CHE F314

2016-2017	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Chemical Engineering Laboratory–I (LAB) CHE F312	Chemical Engineering Laboratory - II (LAB) CHE F314
		Research Methodology-I BITS G661
		Material Science and Engineering CHE F243

2017-2018	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Chemical Engineering Laboratory–I (LAB) CHE F312	Research Methodology-I BITS G661

2018-2019	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Chemical Engineering Laboratory-I (LAB) CHE F312	Research Methodology-I BITS G661
		Process Plant Design Project I CHE F416

2019-2020	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Chemical Engineering Laboratory-I (LAB) CHE F312	Process Plant Design Project I CHE F416
		Process Plant Design Project II CHE F417
		Heat Transfer CHE F241

2020-2021	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Chemical Engineering Laboratory-I (LAB) CHE F312	Process Plant Design Project I CHE F416
	Process Plant Design Project I CHE F416	Process Plant Design Project II CHE F417
	Process Plant Design Project II CHE F417	Heat Transfer CHE F241

2021-2022	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Chemical Engineering Laboratory-I (LAB) CHE F312	Process Plant Design Project I CHE F416
	Process Plant Design Project I CHE F416	Process Plant Design Project II CHE F417
	Process Plant Design Project II CHE F417	Material Science and Engineering CHE F243
	Engineering Chemistry CHE F214

2022-2023	Microfluidics and its applications BITS F417	Chemical Process Technology CHE F419
	Process Plant Design Project I CHE F416	Chemical Engineering Laboratory - II (LAB) CHE F341
	Process Plant Design Project II CHE F417	Process Plant Design Project I CHE F416
	Engineering Chemistry CHE F214	Process Plant Design Project II CHE F417

Teaching Details

Undergraduate Courses(Multi-section)
ES C112	Thermodynamics
TA C211	Measurement Techniques -II
ES C242	Structure and Properties of Materials
BITS F225	Environmental Studies
Undergraduate Courses Chemical Engineering Compulsory Disciplinary Courses
CHE C221	Chemical Process Calculations
CHE F242	Numerical Methods for Chemical Engineers
CHE F244	Separation Processes I
CHE F213	Chemical Engineering Thermodynamics
CHE F244	Separation Processes I
CHE F313	Separation Process II
CHE F313	Chemical Engineering Laboratory I
CHE F341	Chemical Engineering Laboratory II
Undergraduate &Postgraduate Chemical Engineering Electives
CHE F411	Environmental Pollution Control
CHE C322	Chemical Process Technology
CHE C413	Process Plant Safety
CHE G522	Polymer Technology
Postgraduate Chemical Engineering Compulsory Disciplinary Courses
CHE G622	Advanced Chemical Engineering Thermodynamics
BITS E661	Research Methodology
Work Integrated Learning Programme(WILP)
PERL ZC 231	Engineering Materials
PERL ZC321	Chemical process calculations
PERL ZC 311	Chemical Engineering Thermodynamics
PEAB ZC382	Cement Technology
PE ZC319

Courses Taught

BIO F382: Introduction to Healthcare Technologies
Bio F110: Biology Laboratory
Bio F311: Recombinant DNA Technology
BIO F342: Immunology
BIO F243: Genetics
BIO G512: Molecular Mechanisms of Gene Expression
BIO G526: Cancer Biology
BIO G632: Transgenic Technology

Courses

I have taught a variety of courses on campus since October 2005. They are listed below:

PHY F110 Physics Laboratory:

This introductory physics laboratory introduces the art of experimentation in Physics through various experiments in Mechanics, Oscillations and Waves.

PHY F111: Mechanics, Oscillations and Waves

All students of BITS Pilani study this course irrespective of their program of study. This course is an elementary introduction to the theory and applications in the subject area of Mechanics, Oscillations and Waves.

PHY F211: Classical Mechanics

This course introduces the Lagrangian and Hamiltonian mechanics of a system with finite degrees of freedom. Three classes of applications that are included in the course of study are:

Two-body central force problem
Rigid body kinematics and dynamics
Theory of small oscillations

PHY F212: Electromagnetic Theory I

This course introduces the student to the unified theory of Electricity, Magnetism and Light. The course is roughly divided into three parts, each of which addresses the following questions:

Part I: What is the nature of the electric field produced by a static charge distribution? How do you quantitatively describe it? How does the static electric field influence any material medium? How do you characterize the material response to this static electric field?
Part II: What is the nature of the magnetic field produced by a steady and time-independent current? How do you quantitatively describe it? How do we characterize the response of a material to such a static magnetic field?
Part III: What is the experimental basis for unifying the theory of electricity, magnetism and light? How does this lead to Maxwell's equations? How do we understand the existence of light as a standalone system in itself? How do we characterize its properties?

PHY F241: Electromagnetic Theory II

The theory of interacting charged particles and electromagnetic fields is analyzed in detail.

Part I: What is a boundary value problem? Why should we study boundary value problems? How do you go about solving them?
Part II: Why do we introduce the concept of scalar and vector potential? What is the form of Maxwell's equations in terms of scalar and vector potential? How can the non-uniqueness of potentials be leveraged to simply the construction of solutions to Maxwell's equations?
Part III: What are the key features of unbounded propagation of electromagnetic waves in vacuum, lossless and lossy linear dielectrics and conductors? How do properties of propagating electromagnetic waves change as they traverse media with distinct dielectric, magnetic and conducting properties? What are the key features of bounded propagation of electromagnetic waves through transmission lines and waveguides?
Part IV: What are the characteristics of electromagnetic radiation produced by a given time-varying conserved charge and current distribution? How does the approximate description of the charge and current density through electric and magnetic multipoles lead to a systematic understanding of the produced electric and magnetic field at near, intermediate and far distances from the source?
Part V: What is the special theory of relativity? How do we see that the free electromagnetic field is a relativistic system?

Mathematical Methods of Physics

I have taught this course twice before under the pre-2012 curriculum framework. The first part discussed a variety of partial differential equations while the second part was devoted to basic elements of group theory and its representations.

PHY F244: Modern Physics Laboratory

A laboratory course consisting of exciting experiments from Modern Physics.

PHY F342: Atomic & Molecular Physics

Metrology & Phenomenology: How do we qualitatively set up the order of magnitude of various physical quantities associated with the world of atoms, molecules and light? Experiments provide a wealth of spectral data (frequencies emitted and absorbed) on atoms and molecules. How do we construct models based on known theoretical frameworks to explain existing experimental data and arrive at new predictions? (This is the practice of phenomenology in Physics)
Preliminaries: What are the key elements in constructing quantum models of atomic and molecular systems? What approximation methods are available at our disposal?
Hydrogenic Systems: The simplest atomic system is the hydrogen atom. Systems similar to hydrogen are called hydrogenic systems. Experimentalists have provided an extremely detailed record of the spectrum of this light atom. How do we set up a quantum model to explain all aspects of its spectrum? How do we explain the influence of external fields on the spectral lines of hydrogenic systems?
Many-electron atoms: A first-principles prediction of atomic structure involves computing the eigenvalues and eigenfunctions of an N-electron atom problem. This is a challenging problem which has no exact solution. How do we systematically develop approximate solutions to this problem?
Atomic spectroscopy: Atoms emit, absorb and scatter light. The frequencies (and wavelengths) of and the extent to which light is emitted, absorbed and scattered by atoms are measured by experimentalists using various methods. This is called spectroscopy. How do we develop a theoretical model of atom-light interaction which can be used to predict the spectroscopic results?
Molecular Structure: Molecules are formed by the bonding of atoms. How do we set up a quantum-mechanical theory of chemical bonding and use it to predict the existence of molecules and their properties?
Molecular Spectroscopy: How do we understand the emergence of rotational, vibrational and electronic spectra of molecules?

PHY F344: Advanced Physics Laboratory

Theory of Relativity

PHY F412: Introduction to Quantum Field Theory

Particle Physics

PHY F420: Quantum Optics

PHY F422: Group Theory and Applications

Courses I am teaching or have taught

Teaching is the bit in my professional life that I enjoy most. From teaching the first year physics and mathematics courses to wide eyed freshers to teaching advanced physics courses to the die hard physics enthusiast, I relish the challenge of presenting ideas and concepts in physics with as much transparency as is possible.

Semester I, 2024-25

Special Topics in Statistical Mechanics (PHY F423) Advanced course in statistical mechanics that covers interacting systems, mean field theory, phase transitions and renormalization group. (Text books: Statistical Mechanics by Kerson Huang, Equilibrium Statistical Mechanics by M. Plischke and B. Bergersen and Principles of Condensed Matter Physics by P. M. Chaikin and T.C. Lubensky.)

Statistical Physics and Applications (PHY F516) A course in equilibrium statistical mechanics for PhD students. (Text books: Statistical Physics of Particles by M Kardar)

Semester II, 2023-24

Mechanics Oscillations and Waves (PHY F111) The bread and butter course of our department, where we engage the freshers with intermediate mechanics and related topics of waves and oscillations. After a quick revision of fundamental laws and necessary mathematical introduction, advanced topics such as rigid body motion, non-inertial frames, coupled oscillators and Fourier analysis of waves are discussed. (Text book: An Introduction Mechanics by Kleppner and Kolenkow, Introduction to Waves by A P French.)

Theoretical Neuroscience (BITS F317) A first course in Theoretical Neuroscience that introduces neuronal behavior modelling using non-linear differential equations as well the concepts of encoding and decoding of neural data. (Text books: Introduction to neuronal dynamics by Gerstner et al, Introduction to Theoretical Neuroscience by Dayan and Abbott)

Some of the course taught over the semesters

Physics Lab - 1 (PHY F110)
Mechanics lab that runs in tandem with the course on Mechanics, Oscillations and Waves for undergraduate students. It has an assorted set of 10 experiments exploring various concepts in mechanics. Some of the experiments included are: Gyroscope, Coupled Pendulum, Maxwell's wheel etc.

Classical Mechanics (PHY F211)
Second course on mechanics for the physics masters students. Topics covered includes: Planetary motion, rigid body motion, small oscillations, Lagragian and Hamiltonian formalism, Hamilton Jacobi theory. Text books: Classical Mechanics by H. Goldstien, Introduction to classical mechanics by Landau & Lifshitz )

Computational Physics (PHY F313)
A course that focuses on computational numerical analysis with stress on solving physics problem. The course has got a strong hands on component wherein student use the techniques they learn in computational lab to solve problems from mechanics, electricity and magnetism, quantum mechanics and nonlinear dynamics. (Texts book: A First Course in Computational Physics by P L Devries and J E Hasbun, An Introduction to Computational Physics by Tao Pang)

Electromagnetic Theory-2 (PHY F241)
A second course in electricity and magnetism that look at electromagnetic waves (in a vacuum and media), radiation and special theory of relativity. (Text books: Introduction to Electrodynamics by D J Griffiths, Classical Electrodynamics by D Jackson, Feynman Lectures Vol -2)

Mathematics-2 (MATH F112)
A first year course taken by all engineering and science students dealing with introductory linear algebra and complex analysis. (Text books: Elementary Linear Algebra by S Andrilli and D Hecker, Complex Variables and Applications by Churchill and Brown)

Nonlinear Dynamics and Chaos (BITS F316)
An introductory course focusing on methods of studying nonlinear systems. This enables one to explore the rich dynamical behavior these systems exhibit. The students are introduced to bifurcations, fixed points, limit cycles and chaos in nonlinear system. Throughout the course the focus is on applying the methods learned in understanding the dynamics of various systems that are relevant in science and engineering. (Text book: Nonlinear Dynamics and Chaos by Steven H Strogatz)

Courses Taught

Mathematics-I (Basic Calculus)
Mathematics-II (Linear Algebra and Complex Variables)
Mathematics-III (Elementary Differential Equations)
Engineering Mathematics
Probability and Statistics
Real Analysis
Functional Analysis
Optimization Techniques
Numerical Analysis
Ordinary Differential Equations
Partial Differential Equations
Numerical Solutions of Ordinary Differential Equations (with Lab component)
Numerical Methodology for Partial Differential Equations (with Lab component)
Mathematical Modelling

1) Course Content Developed and Recorded the Video Lectures for WILP Students;

Course Name: Calculus

2) Course Content Developed and Recorded the Video Lectures for on Campus Students;

Course Name: MATHEMATICS-II

Current Semester Courses (First Semester: 2024-2025)

Numerical Analysis (MATH F313)
MATHEMATICS-III (MATH F211)
Numerical Methods (Specialization: Rail Engineering)
GATI SHAKTI VISHWAVIDYALAYA
(A Central University under the Ministry of Railways, Government of India)

My courses

Analog & Digital VLSI Design

Topics

Courses Taught / Teaching :

Introduction to Cognitive Neuroscience
Introduction to Bioinformatics
Introduction to Biomedical Engineering
Biostatistics and Biomodelling
Applications of Statistics and Computers in Biology
General Biology
Reading Course in Computational Neuroscience
Reading Course in Consumer Neuroscience
Reading Course in Computational Psycholinguistics
Reading Course in Hierarchical Reinforcement Learning

Courses

ECON F313: Issues in Economic Development

ECON F412/FINF313: Security Analysis and Portfolio Management

ECON F315: Financial Management

ECON F244: Economics of Growth and Development

FIN F414: Financial Risk Analysis and Management ECON F413: Financial Engineering

ECON F242: Micro economics ECON F243: Macro Economics

ECON F312: Money Banking and Financial Markets

ECON F311: International Trade and Balance of Payments ECON F341: Public Finance Theory and Policy

ECON F211: Principles of Economics

ECON F212: Fundamentals of Finance and Accounts ECON F241: Econometrics Methods

ECON F214: Economic Environment of Business

Mathematical Micro economics, Indian Economics, Computational Business Economics

Teaching

Stem Cell and Regenerative Biology

Fundamentals of Tissue Engineering

Biology laboratory

My Courses

Developmental Biology

Instrumentation method and analysis

General Biology

Integrated Biology

Reproductive Physiology

Molecular Evolution

Gene Toxicology

Study in Advanced Topic

Research Practice

Subjects Taught

Signals & Systems
Advanced Digital Signal Processing
Digital Communication
Biomedical Signal Processing
Communication Systems
Communication Systems (Lab)
Digital Signal Processing (Lab)
Analog Electronics (Lab)

Courses

COURSES TAUGHT

CHEM F414 Bio and Chemical Sensors

CHEM F336 Nanochemistry

CHEM F 325 Polymer Chemistry

CHEM F 342 Organic Chemistry IV

CHEM F111 General Chemistry

CHEM C142 Chemistry II

CHEM C232 Chemistry of Organic Compounds

CHEM C331 Structure and Reactivity of Organic Compounds

CHEM C332 Synthetic Organic Chemistry

CHEM 513 Study in Advance Topics

CHEM 531 Recent Advances in Chemistry

CHEM 551 Advanced Organic Chemistry

CHEM F110 Chemistry Laboratory

CHEM C411 Chemical Experimentation

CHEM C231 Chemistry Project Laboratory

TA C 211 Measurement Techniques

BITS G529 Research Project I

BITS G539 Research Project II

BITS C323 Study Oriented Project

BITS C324 Study Oriented Project

BITS C313 Lab Oriented Project

COURSES HANDLED

HUM C382 Sankara's Thoughts

HUM C383 Srimad Bhagwad Gita

Courses

Courses that Dr. Saha has taught in BITS. The ones he is teaching currently are mentioned in BOLD.

AS Instructor in Charge

Sanitation and Public Health (SAN G512)

Sanitation and Public Health (SSTM ZG512) in WILP mode

Environmental Studies (BITS F225)

AS Instructor

Genetic Engineering Techniques (BIO F418)

Experimental Techniques (BIO G642)

Biology Laboratory (BIO F110)

General Biology (BIO F111)

Instrumental Methods of Analysis (BIO F244)

Genomics (BIOT F346)

Courses

Applied Machine Learning

Neural Networks and Fuzzy Logic

Deep Learning

Generative AI.

My Teaching

Courses Teaching(2024-25):

Physical Chemistry IV (IC), Sem 1
General Chemistry (I), LECT, Sem 1
Advanced Physical Chemistry (IC), Sem 1

First Degree (M.Sc.) Course taught:

CHEM F111: General Chemistry
CHEM F241: Inorganic Chemistry II
CHEM F213: Physical Chemistry II
CHEM F244: Physical Chemistry III
CHEM F312: Physical Chemistry IV
CHEM F422: Statistical Thermodynamics
CHEM F335: Organic Chemistry & Drug Design
CHEM F110: Chemistry Laboratory
CHEM F341: Chemical Experimentation II
CHEM C141: Chemistry I
CHEM C142: Chemistry II
TA C111: Measurement Technique I
CHEM C211: Atomic and Molecular Structure
CHEM C231: Chemistry Project Laboratory
CHEM C311: Chemical Kinetics
CHEM C321: Chemical Thermodynamics
CHEM C322: Quantum Chemistry
CHEM C351: Computational Chemistry
CHEM C352: Bonding in Inorganic Compounds
CHEM C362: Chemical Experimentation

Pre-PhD Course taught:

CHEM G553: Advanced Physical Chemistry
CHEM G541: Chemical Application of Group Theory
CHEM G552: Advanced Inorganic Chemistry
CHEM G558: Electronic Structure Theory
BITS G513: Study in Advanced Topic I (Computational Chemistry)
BITS E574: Study in Advanced Topic II (Statistical Mechanics of Classical Fluid)
BIO G510: Applications of Statistics and Computer in Research

SEMESTER WISE BREAK UP:

YEAR	SEM I	SEM II
2003 - 2004	-	CHEM C142, CHEM C351
2004 - 2005	CHEM C141	CHEM C142
2005 - 2006	CHEM C141, CHEM C211, TA C211	CHEM C142, CHEM C231
2006 - 2007	CHEM C141, CHEM C322	CHEM C352, CHEM C411
2007 - 2008	CHEM C141, CHEM C322	CHEM C231, CHEM C352, CHEM C411
2008 - 2009	CHEM C141, CHEM C322	CHEM C352, CHEM C411, CHEM G552
2009 - 2010	TA C211, CHEM C322, ASCR	CHEM C352, CHEM C411, CHEM G541
2010 - 2011	TA C211, CHEM C321	CHEM C142, CHEM C352
2011 - 2012	CHEM F111, CHEM C321	CHEM C322, CHEM F110, ASCR
2012 - 2013	CHEM F111, CHEM C321, BITS E574	CHEM C322, CHEM F241, CHEM F244
2013 - 2014	CHEM F110, CHEM F312, CHEM C311	CHEM C322, CHEM F241, BITS G513
2014 - 2015	CHEM F110, CHEM F312, CHEM F422, BITS C421T	CHEM F241, CHEM F110
2015 - 2016	CHEM F111(L), CHEM F312(IC), CHEM F110, CHEM G553, CHEM C491, CHEM F376/7	CHEM F241, CHEM F110, CHEM F376/7
2016 - 2017	CHEM F111(L), CHEM F312(IC), CHEM F213, CHEM G553	CHEM F241, CHEM F244, CHEM G552
2017 - 2018	CHEM F111(L, IC), CHEM F312(IC), CHEM F213, CHEM G553	CHEM F241, CHEM F244, CHEM G552, CHEM G558
2018 - 2019	CHEM F111(T), CHEM F312(IC), CHEM F213, CHEM G553	CHEM F241, CHEM F244, CHEM F110, BITS G513
2019 - 2020	CHEM F110, CHEM F312(IC), CHEM F213, CHEM G553, BITS G529/G539	CHEM F241, CHEM F244, CHEM F110, BITS G513, BITS G529
2020 - 2021	CHEM F312, CHEM F213, CHEM F335, CHEM F266, CHEM F376, CHEM G553, BITS G513	CHEM F241, CHEM F244, CHEM F110, CHEM F266, CHEM F376, CHEM G529, CHEM G558
2021 - 2022	CHEM F312, CHEM F111, CHEM F266, CHEM F376/7, CHEM G553	CHEM F241, CHEM F376/7, BITS C421T
2022 - 2023	CHEM F111, CHEM F312, CHEM F335, CHEM F376, CHEM F266	CHEM F341, CHEM F320, CHEM F376/7, CHEM F266

Teaching Contribution in BITS Pilani

FIVE YEARS OF TEACHING EXPERIENCE WITH VERY GOOD STUDENT FEEDBACK ON TEACHING SKILLS

AVERAGE STUDENT FEEDBACK SCORES

LECTURE SESSIONS @BITS Pilani, Goa - 8.4/10

TUTORIAL SESSIONS @BITS Pilani, Goa - 8.5/10

LAB SESSONS @BITS Pilani, Goa - 7.9/10

TEACHING @WORK INTEGRATED LEARNING PROGRAMME FOR INDUSTRY PROFESSIONALS - 4/5

LECTURES

ME G512 FINITE ELEMENT METHOD Four times as Instructor in charge.
ME F318 Computer-Aided Design Twice as Instructor in charge.
ME G611 COMPUTER AIDED ANALYSIS & DESIGN Once as Instructor in charge.
ME F218 Advanced Mechanics of Solids Once as Instructor & Once as Instructor in charge.
BITS F110 Engineering Graphics Once as Instructor in charge and twice as Instructor
QMZG531 STATISTICAL QUALITY CONTROL Once as Instructor Incharge (Industry professionals)

LABS

ME F318 Computer-Aided Design Twice as Instructor in charge.
BITS F110 ENGINEERING GRAPHICS Twice as Instructor.
ME F313 PRODUCTION TECHNIQUES II Once as Instructor.
ME F315 Advanced Manufacturing Process Once as Instructor.

WORK INTEGRATED LEARNING PROGRAMME COURSES

DE ZG513 FINITE ELEMENT METHODS – Five times as Instructor in charge
QM ZG531 / MBA ZG531 Statistical Quality Control – One-time only as Instructor in charge

Semester long Projects

Two Special Projects
Eight Study Projects
Nine Design Projects
Twelve Laboratory Projects

Reading course

Machine Learning for Mechanical Engineers during Semester I 2022-23.

FIRST SEMESTER 2020-2021

Course code	Course Name	Role	Course Type	On-campus / WILP
ME F312 LEC + TUT	ADV MECHANICS OF SOLIDS	Instructor In-charge (Feedback: 8 /10)	First Degree	On-campus Lecture
ME G512 LEC	FINITE ELEMENT METHOD	Instructor In-charge (Feedback: 7.24 /10)	Higher Degree	On-campus Lecture
ME F342 LAB	COMPUTER AIDED DESIGN	Instructor (Feedback: 8.73 /10)	First Degree	On-campus Lab

SECOND SEMESTER 2020-2021

Course code	Course Name	Role	Course Type	On-campus / WILP
ME F218/312 LEC + TUT	ADV MECHANICS OF SOLIDS	Instructor (Feedback: 8.48 /10)	First Degree	On-campus Lecture
BITS F110 LAB	ENGINEERING GRAPHICS	Instructor (Feedback: 7.54 /10)	First Degree	On-campus Lab
DEZG513	FINITE ELEMENT METHODS	Instructor In-charge (Feedback: 4 / 5)	Higher Degree	WILP

FIRST SEMESTER 2021-2022

Course code	Course Name	Role	Course Type	On-campus / WILP
ME G512 LEC	FINITE ELEMENT METHOD	Instructor In-charge (Feedback: 8.5 /10)	Higher Degree	On-campus Lecture
ME F313 / ME F315 LAB	PRODUCTION TECHNIQUES II / Advanced Manufacturing Process	Instructor (Feedback: 7.81 /10)	First Degree	On-campus Lab
DEZG513	FINITE ELEMENT METHODS	Instructor In-charge (Feedback: 4.38 / 5)	Higher Degree	WILP

SECOND SEMESTER 2021-2022

Course code	Course Name	Role	Course Type	On-campus / WILP
ME G611 LEC	COMP AIDED ANAL & DESIGN	Instructor In-charge (Feedback: 8.65 /10)	Higher Degree	On-campus Lecture
ME F318/342 LAB	COMPUTER AIDED DESIGN	Instructor (Feedback: 7.64 /10)	First Degree	On-campus Lab

FIRST SEMESTER 2022-2023

Course code	Course Name	Role	Course Type	On-campus / WILP
ME G512 LEC	FINITE ELEMENT METHOD	Instructor In-charge (Feedback: 9.25 /10)	Higher Degree CDC+ First Degree Elective	On-campus Lecture
BITS F110 LAB	ENGINEERING GRAPHICS	Instructor (Feedback: 7 /10)	First Degree	On-campus Lab
DEZG513	FINITE ELEMENT METHODS	Instructor In-charge (Feedback: 4.06 / 5)	Higher Degree	WILP

SECOND SEMESTER 2022-2023

Course code	Course Name	Role	Course Type	On-campus / WILP
ME F318 LEC	COMPUTER AIDED DESIGN	Instructor In-charge (Feedback: 8.43 /10)	First Degree CDC	On-campus Lecture
ME F318 LAB	COMPUTER AIDED DESIGN	Instructor In-charge (Feedback: 8.42 /10)	First Degree CDC	On-campus Lab
MBAZG531 / QMZG531	STATISTICAL QUALITY CONTROL	Instructor In-charge (Feedback: 4.36 / 5)	Higher Degree	WILP

FIRST SEMESTER 2023-2024

Course code	Course Name	Role	Course Type	On-campus / WILP
ME G512 LEC	FINITE ELEMENT METHOD	Instructor In-charge (Feedback: 8.75 /10)	Higher Degree CDC+ First Degree Elective	On-campus Lecture
BITS F110 LAB	ENGINEERING GRAPHICS	Instructor (Feedback: 8.32 /10)	First Degree	On-campus Lab
DEZG513	FINITE ELEMENT METHODS	Instructor In-charge (Feedback: 4.15 / 5)	Higher Degree	WILP

SECOND SEMESTER 2023-2024

Course code	Course Name	Role	Course Type	On-campus / WILP
ME F318 LEC	COMPUTER AIDED DESIGN	Instructor In-charge (Feedback: 8.27 /10)	First Degree CDC	On-campus Lecture
ME F318 LAB	COMPUTER AIDED DESIGN	Instructor In-charge (Feedback: 7.67 /10)	First Degree CDC	On-campus Lab
BITS F110 LEC+TUT	ENGINEERING GRAPHICS	Instructor In-charge Lecture Feedback: 8.45 /10 Tutorial Feedback: 9.09 /10	First Degree	On-campus Lecture & Tutorial
Instructor in charge for two B.E. courses – Engineering Graphics (520 students) and Computer aided design (140 students), one of them is third year CDC and the other is a first year course

FIRST SEMESTER 2024-2025

Course code	Course Name	Role	Course Type	On-campus / WILP
BITS F110 LEC+TUT	ENGINEERING GRAPHICS	Instructor (Feedback: … /10)	First Degree	On-campus Lecture + Lab
DEZG513	FINITE ELEMENT METHODS	Instructor In-charge (Feedback: .../ 5)	Higher Degree	WILP

Course taught at BITS Pilani, Goa Campus

Academic year 2024 - 25

Digital Design (F215) - UG Course

Courses handled

EEE F111 - Electrical Sciences (IC)
ECE/EEE/INSTR F214 - Electronic Devices (IC)
CS/ECE/EEE/INSTR F215 - Digital Design (IC)
ECE/EEE/INSTR F244 - Microelectronic Circuits (IC)
EEE/INSTR F313 - Analog and Digital VLSI Design
EEE F427 - Fiber Optics and Optoelectronics (IC)
EEE F477 - Modeling of Field Effect in nanodevices (IC)
MEL G631 - Physics and Modeling of Microelectronic Devices (IC)
MEL G621 - VLSI Design (IC)

Reading course

I designed semester-long courses that are offered to select students on a particular research topic of interest. These are normally offered in the first semester of every academic year. They are intended to introduce undergraduate students to research areas and the latest technology trends.

Nanoelectronics for a post-CMOS era
Semiconductor Memory Device Technology
Neuromorphic Circuit Design
2D Semiconductor based electronics

Online courses (Free on youtube)

I post videos on various topics related to electronics on youtube, some related to my classes and some in general.

You can visit the channel here.

Teaching Courses

Under Graduate Courses

BITS F111 Thermodynamics

CHE F 212 Fluid Mechanics

CHE F 242 Numerical Methods for Chemical Engineers

CHE F 312 Chemical Engineering Laboratory-I

CHE F 314 Process Design Principles -I

CHE F 311 Kinetics and Reactor Design

CHE F 341 Chemical Engineering Laboratory-II

CHE F 342 Process Dynamics & Control

AAOC C 341 Numerical Analysis

Graduate Courses

CHE G 523 Mathematical Methods in Chemical Engineering

BITS G 661 Research Methodology

Electives

CHE F 414 Transport Phenomena

CHE F 418 Modeling and Simulation in Chemical Engineering

CHE G 554 Computational Fluid Dynamics

Work Integrated Learning Program

PERL ZC 164 Computer Programming Using MATLAB

PE ZC 453 Process Control and Instrumentation

Courses Taught

Sem I 2024-25 (Ongoing)

BIO F111 General Biology

BIO F213 Cell Biology

Courses Taught

At BITS-Pilani, Dubai Campus:

CE F415 - Design of Prestressed Concrete Structures
CE F435 - Introduction to Finite Element Methods
CE F343 - Design of Steel Structures
CE F320 - Design of Reinforced Concrete Structures
CE F211 - Mechanics of Solids
CE F231 - Fluid Mechanics
BITS F110 - Engineering Graphics

At NIT Warangal

CE 101 - Engineering Mechanics
CE 255 - Concrete Technology Laboratory

As tutor in NUS, Singapore:

CE 3165 - Structural Concrete Design
CE 3155 - Structural Analysis

Teaching

Compulsory Courses

English Language Skills-I

Introductory Psychology

Technical Report Writing

Electives

Cross Cultural Skills

Readings from Drama

Negotiation Skills and Techniques

Current Affairs

Comparative Indian Literature

Public Administration

WILP

Off -Campus Course: Technical Report Writing(both Non/structured )

Teaching

Power Electronics

Courses

Principals of Economics
Macroeconomics
New Venture Creation (as campus IC)

Courses taught at FD & HD Levels

First degree (FD/UG) and higher degree (HD) courses taught across the years

Recombinant DNA Technology
Advanced Cell & Molecular Biology
Advanced Recombinant DNA Technology
Genetic Engineering
Advanced Applied Microbiology
Experimental Techniques
Microbiology
Cell Biology
Instrumentation Methods & Analysis (IMA)
Measurement Techniques (BIO Lab)

Taught WILP-Biocon courses

Courses Taught in BITS Goa; PhD Guidance; Courses Taught in US Universities

EMPLOYMENT HISTORY SUMMARY

Teaching as Faculty :

Organization	Capacity	Duration
BITS Pilani, K K Birla Goa Campus	Associate Professor (Tenured)	w.e.f March 01, 2023 - present
BITS Pilani, K K Birla Goa Campus, India	Assistant Professor (Tenured)	10 years
University of Indianapolis, IN	Assistant Professor	04 Months
Community College of Allegheny County, West Mifflin, PA	Adjunct Assistant Professor	10 Months
Point Park University, Pittsburgh, PA,	Adjunct Assistant Professor	05 Months
Ramakrishna Mission Vivekananda Centenary College, Rahara, WB, India	Lecturer (Tenured)	2 years, 09 Months
Total Teaching as Faculty		14 years, 4 months

Teaching as Graduate Student

Organization	Capacity	Duration
Carnegie Mellon University	Graduate Student	7 Years, 2 ½ months
Jawaharlal Nehru University	Graduate Student	06 Months
Total Teaching as Graduate Student		7 years, 8 ½ months

Doctoral Students Supervised in BITS GOA

Neha Yadav. 2016 PHXF0414G. Doctoral Thesis Submitted. Viva Voce Successfully Defended on 02 September 2022 (BITS Pilani, Goa). Thesis Title: “A Study of an Emerging Genre: The Indian Graphic Novel in English (1994-2015)”

Doctoral Students Currently under Supervision

Parul. (2021PHXP0044G) Currently Writing PhD Thesis
Shona Lynn Desilva. (2023PHXP0028G) Currently engaged in coursework.
Athira Manoharan (2023PHX P0422G) Currently engaged in coursework.

Co-Supervisor (Joint PhD Supervision)

Mekhla Salkar Anant (2023 PHXP0420G) Currently engaged in coursework.

Doctoral Thesis Committee (DAC) member:

Rochelle Ann Fernandez. (2020PHXP0074G) Currently in Thesis Submission stage (BITS Pilani, Goa)

RECENT COURSES TAUGHT (Current Institutional Home)

Graduate

BITSG539: Research Project 2: Museum Studies
BITSG529: Research Project 1: International Expositions, Architectural Performance and Everyday Life
BITSG539: Research Project 2: Nostalgia and Performance
BITSG529: Research Project 1: Postmodern Literary Theory
BITSG529: Research Project 1: Orality, Performances, Culture
BITS G 518: WRITING SEMINAR (compulsory course for PhD Scholars in HSS Dept.)
BITS G529: Research Project I: The Performances of Everyday Life, Culture, and Identity
BITSG513: Study In Advanced Topics: Revisionist Thought and Consumer Culture: Challenges and Alternatives
BITS G513- Study in Advanced Topics: Marxist Feminism: Challenges and Alternatives
- BITSG539: Research Project 2: Critical Theory and Social Space
- BITSG511: Advanced Project: Narratives of Slavery
- BITSG511: Advanced Project: Theory, Culture, and Society
- BITSG511: Advanced Project: Literary and Cultural Theory
- BITSG529: Research project 1 : Urban Change and Urban Literature in 19^th century Paris
- BITSG513: Study in Advanced Topics: Literary and Cultural Theory
- BITSG518: Writing Seminar (for Phil)
- BITSG513: Study in Advanced Topics: Postmodern Theory
- BITSG529: Research Project 1: Modern Fiction
- BITSG529: Research Project 1: Postmodern Theory
- BITS G513: Study in Advanced Topics: Postmodern Fiction

Undergraduate

HSSF383: Introduction to Museum Studies
HSSF373: Shakespeare and Popular Culture
HSSF374: Urban Modernity and the Renewal of Paris
BITSF112: Technical Report Writing
HSSF336: Modern Fiction
TAZC312: (WILP): Various Sections in different semesters
HSSF399: Introduction to American Literature
HSSF226: Post Modernism

Past Teaching Experience in the US

University of Indianapolis

ENG 210: Introduction to Literary Criticism and Literary Theory
ENG 212: British Literature II (Romantics to Modern)

Community College of Allegheny County (South Campus)

ENG-100-SC-31, ENG-102-SC-02, ENG-89-SC-05, ENG-100-SC-31, etc. (English Composition and Argument)

Point Park University
1. ENGL-150-EB (English Composition)
2. ENGL-250-DJ (World Literature)

Carnegie Mellon University, Pittsburgh, PA (Graduate Student Teaching)

Carnegie Mellon University, Pittsburgh Campus

76101 (Various sections of Freshman English Composition taught from Fall 2003 – Spring 2010)
76-335: Postmodern Literature
76-245: Shakespeare’s Comedies and Romances (Teaching Assistant)
76-245B: Shakespeare’s Histories and Tragedies (Teaching Assistant)

Carnegie Mellon University, Qatar Campus

76-245: Shakespearean Tragedies: Madness, Guilt, and English Renaissance Culture
76-237: Postmodern American and British Fiction and Cinema

Teaching as Junior Lecturer

R.K.M.V.C. College (full time/ tenured)

Literature Survey, Developmental English, English Composition courses

Jawaharlal Nehru University, New Delhi, India (Graduate Student/adjunct)

LE 448E: Literature in Indian English

2024-25, Sem-1

Introduction to Artificial Neural Networks | MEL G622
Electrical Machines Lab

Courses Taught

Organic Chemistry I (CHEM F212)
Organic Chemistry IV (CHEM F342)
Chemical Experimentation I (CHEM F242)
Green Chemistry and Catalysis (CHEM F337)
Supramolecular Chemistry (CHEM F328)
Chemistry of Organic Compounds (CHEM C232)
General Chemistry (CHEM F111)
Chemistry I (CHEM C141)
Chemistry II (CHEM C142)
Synthetic Organic Chemistry (CHEM C332)
Chemistry Laboratory (CHEM F110)
Measurement Techniques 1 (TA 211)
Study Oriented Project (BITS C323)
Heterocyclic Chemistry (CHEM G561)
Catalysis (CHEM G556)
Advanced Instrumentation Techniques (BITS G654)

Teaching:

Robotics
Mechanisms and Robotics

Courses

ON-CAMPUS (Fall – Sem I and Spring – Sem II)

BITS F415: Introduction to MEMS (for UG and PG students)
- As Instructor-in-charge
- Spring Semesters (Sem II), 2019, 2020, 2021, 2022, 2023 (Ongoing)

MST G511: Non-destructive Testing Techniques (for PG students)
- As Instructor-in-charge
- Fall Semesters (Sem I), 2019, 2020, 2021, 2022

BITS F110: Engineering Graphics (for UG students)
- Currently as Instructor-in-charge for Fall-23 (Sem I, AY 2022-23).
- In past as Instructor and Section-in-charge
- Both Semesters – Spring and Fall Semesters, 2019, 2020, 2021, 2022
ME F428 - Smart Materials (For UG and PG) (Proposed and developed the course)
- Currently as Instructor-in-charge for Fall-23 (Sem I, AY 2022-23).
- The course introduces the basic concepts of Smart Materials to UG and PG students.
- The course covers fundamentals of smart materials (such as piezoceramics, shape memory alloy, MR (Magnetorheological) fluids, fiber optic sensors, among others) and exposes students to rapidly growing field of smart material-based structures/systems to senior and graduate students.
- The course gives students necessary theoretic knowledge to design simple applications of smart materials and structures. This course will cover basics, modeling, design and control of smart structures using various smart materials. Innovation and research-oriented projects/assignments will be encouraged throughout the course.

OFF-CAMPUS (WILP)

DEZC415 and MELZC415: Introduction to MEMS (for professionals)
- As Instructor-in-charge
- Fall (Sem I), 2019 and Spring (Sem II), 2022

Upcoming Course (proposed)

- Bio MEMS (For UG and PG) (In process)

courses

Animal Physiology
Developmental Biology
Reproductive Physiology
Biology Laboratory
General Biology
Laboratory Oriented Project
Study Oriented Project
Design Oriented Project

My Courses

IS C462	NETWORK PROGRAMMING
BITS ZC411/IS ZC313	OBJECT ORIENTED PROGRAMMING
CS C313/IS C313	OBJECT ORIENTED PROGRAMMING AND DESIGN
SS G514/SS ZG514	OBJECT ORIENTED ANALYSIS AND DESIGN
CS C372 / IS C362/CS F372	OPERATING SYSTEMS
BITS C342	OBJECT ORIENTED PROGRAMMING
MATH C222/CS/IS F222	DISCRETE STRUCTURES FOR COMPUTER SCIENCE
CS C341/IS C361	DATA STRUCTURES AND ALGORITHMS
CS C471/ IS C471/IS F311	COMPUTER GRAPHICS
IS C351 CS F111	COMPUTER ORGANIZATION AND ARCHITECTURE COMPUTER PROGRAMMING
TA C162	COMPUTER PROGRAMMING I
TA C252 CS G523 EEE G627/SS ZG656 CS G623	COMPUTER PROGRAMMING II SOFTWARE FOR EMBEDDED SYSTEMS NETWORKED EMBEDDED APPLICATIONS ADVANCED OPERATING SYSTEMS

ES C263	MICROPROCESSOR PROGRAMMING (Lab)
BITS G620	PROFESSIONAL PRACTICE I
BITS G540	RESEARCH PRACTICE
TA C111	ENG GRAPHICS (Lab)
TA C211	MEASUREMENT TECHNIQUES I

PHY C322 PHY C232	SOLID STATE PHYSICS COMPUTATIONAL PHYSICS
PHY C131	PHYSICS I
PHY C132	PHYSICS II
PHY C391	IMA
PROJECT/ RESEARCH Type	COMPUTER PROJECTS, STUDY ORIENTED PROJECTS, LAB ORIENTED PROJECTS, INFORMATION SYSTEMS PROJECT, SPECIAL PROJECTS, RESEARCH PRACTICE, THESIS, DISSERTATION

Teaching

Organic Chemistry II (CHEM F243)
Organic Chemistry III (CHEM F311)
Chemical Experimentation I (CHEM F242)
Green Chemistry and Catalysis (CHEM F337)
Advanced Organic Chemistry (CHEM G511)
General Chemistry (CHEM F111)
Chemistry II (CHEM C142)
Chemistry Laboratory (CHEM F110)
Study Oriented Project (BITS C323)
Supramolecular Chemistry (CHEM F328)
Catalysis (CHEM G556)
Recent Advances in Chemistry (CHEM G532)
Advanced Instrumentation Techniques (BITS G654)
Heterocyclic Chemistry (CHEM G561)
Sustainable Chemistry using Renewables (CHEM F431)
Study Project (CHEM F 266)
Lab Project (CHEM F 366)
Design Project (CHEM F376)
Special Project (CHEM F491)
Design Project (EEE F376)
Design Project (CS F376)
Study Project (CS F266)
Chemistry of Organic Compounds (CHEM C232)
Chemistry I (CHEM C141)
Chemistry II (CHEM C142)
Measurement Techniques 1 (TA 211)

Teaching

BITS F234 Introduction to Engineering Design (BE First Year Course)

ME G641 Theory of Elasticity and Plasticity (ME Final Year Course)

Teaching

List of courses taught at BITS Pilani
1.	Electromagnetic Fields and Waves [CDC for ECE]
2.	Electromagnetic Fields and Microwave Engineering [Elective for ECE/EEE/E&I]
3.	Electrical Sciences [Fundamental course for first year]
4.	Digital Design [CDC for ECE/EEE/E&I]
5.	Antenna theory and Design [Elective for ECE/EEE/E&I]
6.	Digital Signal Processing [CDC for ECE]
7.	Analog Electronics [CDC for ECE/EEE/E&I]
8.	Communication Networks [CDC for ECE]
9.	RF and Microwave Engineering [CDC for masters in Communication Systems]

Course

Cell Biology

Cancer Biology

Animal Cell Technology

Experimental Technique

Advance Cell and Molecular Biology

Genetic Engg.

Teaching

At BITS:

Production Technology (2 times)
Material Science and Engineering (3 times IC)
Production Planning and Control (4 times on-campus and 5 times WILP)
Engineering Optimization (3 times IC)
Engineering Drawing (few) and Workshop Techniques (2 times IC multi-section)
Mechanical Engineering Lab (3 times, 1 time IC)
Quality Control (1 time WILP)
Advanced Mechanics of Solids (3 times IC)
Finite element methods (1 time IC)

Production Technology
Non-Traditional Machining Techniques
Non-Destructive Testing
Statistical Quality Control
Engineering Mechanics and Drawing

Courses

Courses

Courses taught :
Operating Systems

Real-time Systems

Database Systems

Computer Programming

Advanced Operating Systems

Courses Currently teaching:
Operating Systems

Labs conducted:
Database systems

Computer Programming

Operating systems

Real-time systems

Computer Architecture

Teaching

"The true teachers are those who help us think for ourselves." - Dr. Sarvepalli Radhakrishnan

Courses

First Degree

Energy Storage Technologies
Thermodynamics
Applied Thermodynamics
Automotive Technology
Refrigeration and Air Conditioning
Engines, Motors and Mobility (IC Engines)
Prime Movers and Fluid Machines
Workshop Practice
Engineering Graphics
Power Plant Engineering

Higher Degree

Heating and Cooling of Buildings
Cryogenic Engineering
Renewable Energy
Energy Systems Engineering

Work Integrated Learning Program (WILP)

Energy Management
Design of Experiments
Mechanical Technology

Teaching Details

2024-25 first semester: NLP for third and fourth year undergraduate students.

Teaching Experience

During the current Semester-I, 2024-25, I continue to teach the first degree course “BITS F462 Renewable Energy”, to students from various First Degree Programs of the Institute, Viz. AA, A3, A4, A8.

During the past semesters during Academic Years from 2000-2001 to 2023-2024, courses taught include discipline elective courses and, compulsory discipline courses, as follows:

Discipline Elective Courses:

EEE F473/INSTR F473 Wind Electrical Systems for students of FD programs A3 and A8
EEE F427 Electric Power Utilization and Illumination, for students of FD program A4
ME F424 Energy Management, for students of FD program A4

Compulsory Discipline Courses:

1. Power Electronics for students of FD programs A3 and A8
2. Electrical Machines for students of FD programs A3 and A8
3. Electrical Sciences for students of all FD programs including A3 and A8
4. Communication Systems for students of FD program A3
5. Microelectronics for students of FD programs A3 and A8
6. Introduction to Environment for students of all FD programs

Courses Taught

Theory Courses

Mechanics Oscillations Waves
Electromagnetic Theory 1
Mathematical Methods in Physics
Quantum Mechanics 1
Quantum Mechanics 2
Theory of Relativity
General Theory of Relativity and Cosmology

Lab Courses

Physics Lab 1
Electromagnetics and Optics Lab
Advanced Physics Lab

Courses Taught/Teaching

All Courses Taught/Teaching

FIRST DEGREE (UNDERGRADUATE) COURSES

HSS F237: Contemporary Indian English Fiction
HSS F337: English Literary Forms and Movements
HSS F338: Comparative Indian Literature
GS F241: Creative Writing
HSS F342: Advanced Communicative English
GS F244: Reporting and Writing for the Media
BITS F112: Technical Report Writing
PE ZC312/ TAZC312: Technical Report Writing (WILP Course)
BITS F382: Reading Course
HSS F383: Introduction to Museum Studies
HSS F266: Study Oriented Project

HIGHER DEGREE (POSTGRADUATE) COURSES

BITS F437: Technical Communication

PRE-PH.D. COURSES (OFFERED AS PART OF PH.D. COURSE WORK)

BITS G 513 : Study in Advanced Topics
BITS G511 : Advanced Project
BITS G529 : Research Project I
BITS G539 : Research Project II
BITS G619 : Professional Practice
BITS G649 : Reading Course
BITS G620 : Professional Practice I

PH.D. COURSES

BITS C791T: Teaching Practice I
BITS C797T Ph. D Seminar
BITS C799T Ph. D Thesis

TEACHING

COURSES TAUGHT

FIRST DEGREE COURSES

BIOLOGY LABORATORY (BIO F110)
General Biology ( BIO F111)
GENETIC ENNG. TECHNIQUES (BIO F418)
INSTRUMENTAL METHODS OF ANALYSIS (BIO F244)
GENETICS (BIOF243)
Ecology and Environmental Sciences (BIO F241)

HIGHER DEGREE COURSES

Molecular Mechanism of Gene Expression (BIO G512)
HUMAN GENETICS (BIO G612)
GENETIC ENNG. TECHNIQUES (BIO F418)

PROJECT BASED COURSES

LABORATORY PROJECT (BIO F366)
DESIGN PROJECT (BIO F376)
STUDY PROJECT (BIO F266)
THESIS BITS C421T/422T
Higher Degree Research Practice (BITS G540)

Courses Taught

1. Chemical Engg. Lab-I, CHEF312 , FD

2. Kinetics & Reactor Design, CHEF311 Tut, FD

3. Chemical Engg. Lab-II, CHEF312

4. Chemical Process Optimization, CHEG558, HD

5. Environmental Process Engineering, EEZG622, HD (WILP)

6. Process Control & Instrumentation, PEZC453, FD (WILP)

Teaching

Current Semester I (2024-2025)

Computational Physics ( PHY F313)
Physics Lab I ( PHY F110)
First Degree (FD) thesis based on stochastic complex system ( Financial Crises Data)
FD Projects based on stochastic complex system ( Financial Crises Data)

Courses taught

Computational Physics
Physics Lab I
Mechanics, Oscillation and Waves
Mathematical Methods of Physics
Advanced Lab
Calculus I
Calculus II
Thermodynamics
Data Structure and Algorithms
Applied Statistical Methods
Probability and Statistics
Financial Engineering
Statistical Mechanics
Statistical Physics and Application
Nonlinear Dynamics and Chaos
Discrete Structures for Computer Sciences
Introduction to Statistical Methods
General Theory of Relativity
Electromagnetic Theory I
Environmental Statistics
Linear Algebra and Optimization
Advanced Physics Lab
Engineering Mathematics II
Quantum Mechanics I
Quantum Mechanics II
Quantum Theory and Application
Particle Physics
Advanced Quantum Mechanics
IMA Lab
MT 1 Lab
Physics II
Physics I
Numerical Analysis
SOP
DOP
LOP
FD Thesis

Courses

At BITS

POMZG521 Statistical Process Control (WILP PG) 2021 (Jan), 2021 (August), 2022 (Jan), 2022 (August), 2023 (Jan), 2023 (August), 2024 (Jan), 2024 (August)
ME F414 Fuel Cell Science and Technology (UG) 2020
ME F110 Workshop Practice (UG) 2018, 2022, 2023, 2024
MM ZG515 Quantitative Methods (WILP PG) 2018
ME F213/MF F213/ME F216 Materials Science and Engineering (UG) 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
QMZG 531 Statistical Quality Control (WILP PG) 2016
MST-F332 Materials Processing (UG) 2016, 2017, 2019, 2020, 2021
MF-F343 Casting and Welding (UG) 2016, 2017, 2018, 2020, 2021
ME-F452 Composite Materials and Design (UG) 2016
DE-G631 Materials Technology and Testing (PG) 2015, 2016, 2017, 2018, 2019, 2024
ME F366/ ME F367 Laboratory Oriented Project (UG) 2017, 2018
AETMZG 6612 Advances in Materials, Composites & Plastics (WILP PG) 2018
ME F215/ MF F215 Mechanical Engineering Laboratory (UG) 2018, 2019, 2020, 2021
ME F213 Production Technology 1 (UG) 2019, 2020
ME F266 Study Oriented Projects (UG) 2019, 2020

At NIT Calicut

Materials Science and Engineering (UG) 2014
Thermodynamics of Materials (PG) 2014
Characterization of Materials (PG) 2015
Ceramics Science & Technology (PG) 2015

Courses Taught

Logic in Computer Science
Design and Analysis of Algorithms
Data Structures and Algorithm Design
Advanced Algorithms and Complexity
Data Structures and Algorithms
Artificial Intelligence
Theory of Computation
Introduction to Computer Programming

Courses

ECON F241: ECONOMETRIC METHODS
ECON F242: MICROECONOMICS
ECON F343: ECONOMIC ANALYSIS OF PUBLIC POLICY
BITS F314: GAME THEORY AND ITS APPLICATIONS
ECON F213: MATHEMATICAL AND STATISTICAL METHODS

Faculty Teaching

Courses Teaching

Parallel Computing

Lecture M - W - F (3:00 PM to 3:50 P.M) in C-401

Courses Taught

2023-2024 Semester-I Parallel C0mputing

2023-2024 Semester-I Computer Organization & Architecture (WILP)

2023-2024 Semester-II Microprocessor & Interfacing

Courses

ECON F355: Business Analysis and Valuation
ECON F 354/FIN F311: Derivatives and Risk Management
ECON F412/FIN F313: Security Analysis and Portfolio Management

Teaching

Courses

General Chemistry Chem F111

General Chemistry Lab Chem F110

Instrumental Methods of Analysis CHEM F313

Chemical Experimentation CHEM F341

Chemical Kinetics CHEM C311

Inorganic Chemistry III CHEM F343

Laboratory oriented projects

Graduate student projects in the area of

Water research- Purification and Separation methods, Advanced oxidation processes,

Photochemistry and Photobiology- Metal complex, nanoparticle and organic based photosensitizer for water disinfection, activation of oxidants for degradation of dye pollutants

Spectroscopic methods- UV-visible, IR, NMR, ESR, Kinetic methods, and others

Bioconjugation - DNA binding, Cell membrane interactions, and antimicrobial activities

Courses

ECON F211: PRINCIPLES OF ECONOMICS

ECON F242: MICROECONOMICS

ECON F311: INTERNATIONAL ECONOMICS

ECON F242: MATHEMATICAL AND STATISTICAL METHODS

Teaching

On-campus courses:

Electrical Sciences I

Electrical Sciences II

Introduction to Systems

Electrical Machines

Control Systems

Signal and Systems

Modern Control Systems

Digital Signal Processing

WILP courses

Electrical and Electronics Technology

Advanced Control Systems

Teaching

Advances in Recombinant DNA Technology
Biology Project Laboratory
Advanced Cell and Molecular Biology
Plant Biotechnology
Instrumental Methods of Analysis
General Biology
Measurement Techniques/Biology Laboratory
Plant Physiology
Genomics
Recombinant DNA Technology
Beginning Japanese
LOP/SOP/COP/DOP
PP1/PP2/HD Dissertation/Research Practice/Study in advanced topics
Reading Course

Teaching

Courses Taught/Teaching in BITS

Caste and Gender in India
Cultural Studies
Post Colonial Literatures
Literary Criticism
Comparative Indian Literature
Technical Report Writing
Phonetics and Spoken English
Linguistics
Advanced Communicative English
Theoretical Approaches to Liberal studies
Writing Practice (WILP)
Introduction to Museum Studies

Courses Designed

Post Colonial Literatures - HSS F340 - singly designed and introduced the course in BITS – 2015
Caste and Gender in India-HSS F369 - singly designed and introduced the course in BITS – 2019
WILP – Critical Analysis of Literature and Cinema - BSDC*ZC322 co-authored the course design and guided the teaching faculty – 2020
M.Phil. – Theoretical Approaches to Liberal studies HSS G512 – co-authored the course design and introduced in BITS, Goa – 2019

Courses Developed

Literary Criticism- ENGL C 331/HSSF335-redesigned the handout and course contents and introduced in BITS Goa – 2012
Linguistics – HSS F222 - redesigned the handout and course contents and introduced in BITS, Goa – 2012
Cultural Studies - GS F242 - redesigned the handout and course contents – 2014.
WILP – Cultural Studies- BSDCH ZC242- prepared the Teaching manual for the course – 2021.

Courses Taught in Institutions prior to BITS

Romantic Literature
Drama
American Literature
History of English Literature
Regional Literatures in Translation
Dalit literature

Courses I Teach

PHY F111 Mechanics, Oscillations and Waves (2 semesters)

Foundational physics course for all streams, texts: Mechanics, Kleppner and Kolenkow; Vibrations and Oscillations, A P French

PHY F110 Physics Laboratory (3 semesters)

PHY F244: Modern Physics Laboratory (1 semester)

Courses Taught

CHEM C141 Chemistry I
CHEM C142 Chemistry II
TA C211 Measurement Techniques I
CHEM C391 Instrumental Methods of Analysis
CHEM C232 Chemistry of Organic Compounds
CHEM C331 Structure & Reactivity of Organic Compounds
CHEM C332 Synthetic Organic Chemistry
CHEM F242 Chemical experimentation I
CHEM F110 Chemistry Laboratory
CHEM F111 General Chemistry
CHEM F243 Organic Chemistry II
CHEM F311 Organic Chemistry III
CHEM F342 Organic Chemistry IV
CHEM F414 Bio and Chemical Sensors
CHEM G531 Recent Advances in Chemistry
CHEM F313 Instrumental Methods of Analysis

Teaching

Fundamentals of Finance & Accounts

Financial Management (On-Campus & WILP)

Security Analysis & Portfolio Management

Business Analysis & Valuation

Behavioral Finance (WILP)

Financial & Management Accounting (WILP)

Courses Taught

Foundational Undergraduate Courses

PHY F110	Physics Laboratory
PHY F111	Mechanics, Oscillations and Waves
PHY F212	Electromagnetic Theory 1
ES C242	Structure and Properties of Materials

M.Sc. (Physics) Core courses

PHY F211	Classical Mechanics
PHY F214	Electricity, Magnetism and Optics Laboratory
PHY F244	Modern Physics Laboratory
PHY F312	Statistical Mechanics
PHY F341	Solid State Physics
PHY F344	Advanced Physics Laboratory

Multi-Discipline Elective Courses

BITS F316	Nonlinear Dynamics and Chaos
BITS F416	Introduction to Nanoscience
BITS F417	Microfluidics and its applications
PHY F414	Physics of Advanced Materials

Undergraduate Project Type Courses

PHY F266	Study Project
PHY F366/ PHY F367	Laboratory Project
PHY F376/ PHY F377	Design Project
BITS F423T	Thesis

M.E. and PhD courses

BITS G641	Modern Experimental Methods 1
BITS G629T	Dissertation (M.E)
BITS G661	Research Methodology

Teaching Labs

Advanced Physics Lab
Electromagnetism and Optics Lab

Courses

2021-22

Postcolonial Literature (HSS F340)
Research Methodology I (BITS E661)

Courses

Probability and Statistics
Differential Equation
Discrete Mathematics
Combinatorial Mathematics
General Mathematics 2
Discrete Mathematical Structures

Courses

Courses Taught

CS F429 - Natural Language Processing
SS ZG537 - Information Retrieval
Natural Language Processing
Information Retrieval
Compiler Construction
Data Mining
Data Warehousing
Computer Programming II
Computer Programming
Programming Languages and Compiler Construction
Data Structures and Algorithms(Tutorial)
Bioinformatics
Object Oriented Programming using Java
Object Oriented Analysis and Design
Software Engineering
Software Testing Methodologies
Operating Systems

Courses

TA C111 & BITS F110 Engineering Graphics

ME C382 Computer Aided Design

ME F432 Computer Aided Manufacturing

ME G611 Computer Aided Analysis and Design

TA C222 Measurement Techniques – II

TA C112 Workshop Practice

POWJS ZC481 & POWES ZC481 Plant layout and Design (WILP)

ET ZC235 Manufacturing Processes (WILP)

DE ZG 515 Finite Element Methods (WILP)

ME C211 Applied thermodynamics (Tutorial)

ME C331 Transport Phenomena – II (Tutorial)

Courses

Teaching Interests

Managerial Economics
Macroeconomics
Money, Banking, and Financial Markets
Applied Time Series Econometrics

Courses Taught

NMIMS, Hyderabad (June, 2016 - December, 2016)

Managerial Economics
Business Environment & Macroeconomics

BITS Pilani, Hyderabad Campus (January, 2017 - till date)

Principles of Management
Money, Banking, & Financial Markets
Project Appraisal
Principles of Economics
Macroeconomics

Courses

Foundation Courses For Undergraduate Engineers

Mechanics, Oscillations and Waves (PHY F111 / PHY C131)
Electrical Sciences (EEE F111)
Electromagnetic Theory I (PHY C132)
Measurement Techniques Lab I (TA C211)

Compulsory Discipline Courses for M.Sc. (Hons.) Physics

Modern Physics (PHY C221)
Solid State Physics (PHY C322)
Optics (PHY F213)
Instrumental Methods of Analysis (PHY C391)
Advanced Physics Lab (PHY F344)
Electromagnetism and Optics Lab (PHY F214)
Modern Physics Lab (PHY F244)

Compulsory Discipline Courses for EEE / ECE / INSTR

Electronic Devices ( EEE / ECE / INSTR F214)

Ph.D. Courses

Research Methodology (BITS E661)
Selected Topics in Solid State Physics (PHY G531)

Elective Courses

Microfluidics and its Applications (BITS F417 / ME F423)
Physics of Semiconductor Devices (PHY F426)
Physics Project Lab (PHY C231)

Study and Lab Oriented Projects

(PHY F376 / PHY F377 / PHY F266 / BITS C323 / BITS C314)
Passive Micromixers - Numerical Simulation, Analysis, Experiments
Microfluidics
Soft Lithography

Teaching Labs

Advanced Physics Lab
Modern Physics Lab
Electromagnetism and Optics Lab

Teaching at BITS

GS F223: Introduction to Mass Communication

News

SSX-2025

Indo-French Symposium

BITS Pilani WILP Convocation 2024

Convocation 2024

Vidwanotsav : Ph.D Fest

International Symposium cum Workshop

ICONWIL-2024

An International Conference on Sustainable Urban Water Management for Fast Growing Cities

National Symposium on Current
Trends in Pharmaceutical Sciences
(CTPS) – 2024

International Women’s Day Celebrations – 2024

ADMISSIONS

2024 Batch Reunion for Batches of 2012 & 2013

Overseas Student Doctoral Programme Academic Year 2023-24

AGANIT – Newsletter

Aspects of Effective Teaching

Convocation 2023

The Indian Mathematical Society (IMS)-2023

Learn more about BITS-RMIT Higher Education Academy

BITSAT-2023

BITS Pilani invites applications to register for PhD First Semester, 2023–2024.

About
BITS Pilani, Hyderabad Campus

Discover a dynamic campus that is constantly evolving and expanding

Birla Institute of Technology and Science, Pilani - Hyderabad campus is one of the premier technical and science institutes of higher learning in India.

The sprawling campus is built amidst lush greenery spreading over 200 acres of land at Jawahar Nagar, Shameerpet, Hyderabad. Surrounded by natural beauty, the campus is about 70 kilometers away from Rajiv Gandhi International Airport, Shamshabad and 27 kilometers from Secunderabad railway station.

know more

No.1

Technical Institute in non-Govt. category by India Today

Top3

In Pharmacy Category by the QS India Ranking

59years

completing in the service of nation

IOE

Recognized As An Institution Of Eminence By Govt. Of India

In Top 8

University Graduate QS India Employability Ranking 2022 by

800+

startups 14 Unicorn & 01 Decacorn

125crore

of DST Grant on NMICPS

200M

Engaged to create vibrant Entrepreneurship & Innovation eco-system

admissions

EXPLORE

Library | Student Welfare | Anti Ragging Policy | Medical Center

Programs Offered

Departments at Hyderabad Campus

The newest of the four BITS Pilani campuses, the Hyderabad campus currently houses 12 departments spanning the gamut of pure science and applied science. Each of these departments is notable for their excellent faculty, the curriculum offered, the research it conducts and the number of sponsored projects the department has won.

Hyderabad

Physics

The Department of Physics, Birla Institute of Technology....

KNOW MORE

Hyderabad

Pharmacy

About Us

The Department of Pharmacy at BITS Pi....

KNOW MORE

Hyderabad

Mechanical Engineering

About the Department

The Departm....

KNOW MORE

Research & Innovation

In any higher education system, research plays a crucial and integral role. Here at BITS Pilani, Hyderabad Campus, we actively encourage research among both staff and students. The Institute accords adequate importance and support to applied research besides basic research, which forms the basis of all applied research.

Centers

Our centers are involved in varied activities ranging from Software Development and Robotics to Women's studies and Desert Development Technologies.

Hyderabad

Major Facilities

Major cleanroom facilities. BITS Pilani Hyderabad campus established state of the art facilities for

KNOW MORE

Hyderabad

Entrepreneurship Cell

"The E-CELL at BITS Pilani, Hyderabad Campus is aimed at fostering entrepreneurial skills among the

KNOW MORE

Hyderabad

Innovation cell

I-cell is to promote and support innovations across the spectrum of science and technology with appl

KNOW MORE

View All

latest update

Announcements

SSX-2025

Indo-French Symposium

BITS Pilani WILP Convocation 2024

Convocation 2024

Vidwanotsav : Ph.D Fest

International Symposium cum Workshop

An International Conference on Sustainable Urban Water Management for Fast Growing Cities

National Symposium on Current
Trends in Pharmaceutical Sciences
(CTPS) – 2024

International Women’s Day Celebrations – 2024

ADMISSIONS

2024 Batch Reunion for Batches of 2012 & 2013

Overseas Student Doctoral Programme Academic Year 2023-24

Aspects of Effective Teaching

Convocation 2023

The Indian Mathematical Society (IMS)-2023

Learn more about BITS-RMIT Higher Education Academy

BITS Pilani invites applications to register for PhD First Semester, 2023–2024.

Admission to Ph.D Programmes

Bachelor of Science in Computer Science

News

SSX-2025
4 October, 2024
Indo-French Symposium
4 October, 2024
BITS Pilani WILP Convocation 2024
24 August, 2024
Convocation 2024
2 August, 2024
Vidwanotsav : Ph.D Fest
22 July, 2024
International Symposium cum Workshop
11 July, 2024
An International Conference on Sustainable Urban Water Management for Fast Growing Cities
6 April, 2024
National Symposium on Current
Trends in Pharmaceutical Sciences
(CTPS) – 2024
1 April, 2024
International Women’s Day Celebrations – 2024
6 March, 2024
ADMISSIONS
15 January, 2024
2024 Batch Reunion for Batches of 2012 & 2013
11 January, 2024
Overseas Student Doctoral Programme Academic Year 2023-24
30 November, 2023
Aspects of Effective Teaching
22 July, 2023
Convocation 2023
20 July, 2023
The Indian Mathematical Society (IMS)-2023
19 July, 2023
Learn more about BITS-RMIT Higher Education Academy
9 June, 2023
BITS Pilani invites applications to register for PhD First Semester, 2023–2024.
11 May, 2023
Admission to Ph.D Programmes
2 May, 2023
Bachelor of Science in Computer Science
20 April, 2023

Latest Events

HYDERABAD Conferences

International Conference on Sustainable Urban Water Management for Fast Growing Cities – 2024, 21-23 October, 2024 @ BITS Pilani, Hyderabad Campus

27 Feb 2024

HYDERABAD Conferences

International Conference on Work Integrated Learning – 2024, 15 -16 April 2024 @ BITS Pilani, Hyderabad Campus

17 Oct 2023

HYDERABAD

Today, Cyber Security is Everybody’s Business”

05 Oct 2023

VIEW ALL

Placements at Hyderabad Campus

About or Nearly 600 students from the Hyderabad campus sit for placements every semester, of these almost 100% succeed in securing a job.

VIEW ALL

Explore

Scrutiny of grades | Information for Prospective students

How to Find Us

Reach Us

Birla Institute of Technology & Science, Pilani
Hyderabad Campus
Jawahar Nagar, Kapra Mandal
Medchal District - 500 078
Telangana, India

BITS Hyderabad in 360°

Dynamic. Cosmopolitan. Diverse. You’ll find all the energy of BITS – its cultural richness and spirit of innovation – right here on our Hyderabad campus. Take a look around in this 360° tour.

YOUTUBE

Courses

Higher Degree Courses

IPR and Pharmaceuticals
Advanced Medicinal Chemistry
Computer-Aided Drug Design
Advanced Pharmacology
Laboratory Projects
Chemistry of Macromolecules
Advanced Pharmaceutical Chemistry
Structure & Reactivity of Organic Compounds(As a part of WILP program of BITS delivered to Matrix Laboratories, Hyderabad)

First Degree Courses

Introduction to Molecular Biology and Immunology
Medicinal Chemistry-I
Medicinal Chemistry-II
Natural Drugs
Chemistry of Organic Compounds
Medicinal Chemistry
Phytochemistry
Anatomy, Physiology & Health Education
Pharmaceutical Analysis
Measurement Techniques-I (Chemistry)
Chemistry-II

Courses

IS F341 Software Engineering (every 2nd semester since 2018-19)*

SS G515 Data Warehousing (every 1st semester since 2019-20)

SS ZG622 Software Project Management (every semester since 2018-19)

* Since Feb 2022 Visual Paradigm Online tool is used in this course.

The online diagramming tools (e.g. UML, BPMN, ArchiMate, ERD) are made available to BITS-Pilani, Hyderabad Campus under the Academic Partner Program from Visual Paradigm Online for educational use.

Courses

1. Mechanics, Waves and Oscillations ( UG )

2. Quantum Mechanics I ( PG )

3. Quantum Mechanics II ( PG )

4. Theory of Relativity (PG)

5. Mathematics II ( UG )

6. Nuclear and Particle Physics (PG)

7. Phyics of Atoms and Molecules (PG)

8. Quantum Field Theory (PG)

9. Physics Lab I ( UG )

Courses

First Degree Courses:

Thermodynamics
Applied Thermodynamics
Power Plant Engineering
Automotive Vehicles
Automotive Technology
Combustion
Numerical Techniques for Fluid Flow and Heat Transfer
Transport Phenomena-II
Workshop Practice

Higher Degree Courses:

Fluid Dynamics
Computational Fluid Dynamics
Convective Heat & Mass Transfer

Off Campus Course:

Energy Management
Power Plant Engineering
Power Generation
Practice School-1
Practice School-2

Content Design & Development:

Mechanical Technology
FEM & FVM

Courses

I. Courses Taught at BITS Pilani, Hyderabad Campus

(1) Signals and Systems (BE 2nd Year ECE/EEE/INSTR, 1 time, Feedback-9.41/10).

(2) Neural Network and Fuzzy Logic (BE 3rd Year ECE/EIE/EEE/CSE/IT, 5 times, average Feedback-9/10).

(3) Introduction to Artificial Neural Network (ME 1st year Communication/ Embedded system, 2 times, Feedback-9.68/10).

(4) Digital Signal Processing (BE, ECE/EIE/EEE students, 1 time)

II. Labs Handled at BITS Pilani, Hyderabad Campus

1. Signals and system using MATLAB (2 times, Feedback-9.09/10).

2. Neural Network and Deep Learning using MATLAB and Python (Feedback-7.46/10).

3. Digital Signal processing Lab using MATLAB (1 time)

III. Courses Taught at Previous University

(1) Introduction to Information Theory (EET3061, BTech 7th Sem, ECE)

(2) Introduction to MATLAB (MTH 3006, BTech 4th Sem, EEE and CSE)

IV. Teaching Assistant in Courses at IIT Guwahati

(1) Biomedical Signal Processing (EE 626, Course Instructor: Prof. Samarendra Dandapat, Branches: BTech 7th Sem, MTech 1st sem, PhD)

(2) Linear Algebra and Optimization (EE 504, Course Instructor: Prof. Samarendra Dandapat, Branches: MTech 1st sem, PhD)

(3) Probability and random Processes (EE 506, Course Instructor: Prof. Samarendra Dandapat, Branches: MTech 1st sem, PhD)

Courses

PHY F110 - Physics Laboratory [Aug 2024- Dec 2024]

Currently teaching: Electromagnetic Theory I

Courses

Econometric Methods
Principles of Economics
Issues in Economic Development
Economic Environment of Business
Project Appraisal

Courses taught in BITS

ME F414 Fuel Cell Science and Technology (UG) 2020, 2021, 2022
ME F426 Industry 4.0 in Manufacturing (UG) 2020
DE G513 Tribology (PG) 2020, 2021, 2022
ENGG ZC232/PE ZC234 Engineering Materials (WILP UG) 2020, 2021, 2022
MST-F332 Materials Processing (UG) 2021
ME F216 Materials Science and Engineering Lab (UG) 2021, 2022
ME F318 Computer Aided Design (UG) 2022

Courses

CHEM F111:General Chemistry
CHEM F110: Chemistry Laboratory
CHEM G554:Physical Methods in Chemistry
CHEM F313: Instrumental Methods of Analysis
CHEM F 414:Bio and Chemical Sensors
BITS F225: Environmental Studies
CHEM F242:Chemical Experimentation Lab 1

Courses

Electrical Sciences (EEE F111)
Electrical Machines : Theory & Lab (INSTR/EEE/ECE F211)
Power Electronics: Theory & Lab (EEE/INSTR F342)
Control Systems Lab.
Power Systems (EEE F312)

Electrical Science

Microelectronic Circuits

Digital Design

Analog and Digital VLSI design

Electrical Machines

Analog and Digital VLSI Design

Electrical and Electronics Circuit Lab

VLSI Design

VLSI Architecture

Embedded System Design

Teaching

Academic Year 2024-25

First Semester

Mechanics, Waves and Oscillations
Introduction to Basic Science
Physics Laboratory

Courses

Year 2024-2025

DE G531 Product Design (Higher Degree)

Courses

Thermodynamics BITS F111 (First semester 2022-23)

Courses

FD Courses (Regular Term)

BIO F110 (Biology Laboratory)
BIO F111 (General Biology)
BIO F212 (Microbiology)
BIO F216 (Water, Sanitation and Solid Waste Management)
BIO F241 (Ecology and Environmental Science)
BIO F441 (Biochemical Engineering BIO)
BIO F451 (Bioprocess Technology)
BITS F225 (Environmental Studies)
BITS F467 (Bioethics and Biosafety)

FD Courses (Summer Term)

BITS F467 (Bioethics and Biosafety)

Courses

This semester, I am teaching two courses Principles of Economics (ECON F211) and Behavioural Economics (ECON F345).
Previously taught courses-
- Microeconomics (ECON F242), Industrial Economics (ECON F314), Game Theory and Its Applications (ECON F211), Mathematical and Statistical Methods (ECON F213),..
- For Ph.D students- Topics of Mathematical Economics (ECON G548), Topics of Advanced Topics (ECON G513, focused on microeconomics theory),..

Courses

Physics F110 : Section 4 (2023)
Physics F242 : Quantum Mechanics I Summer course (2023)

Courses

S. No.	Course Title and No.	Program
1	PHARMACEUTICAL UNIT OPERATIONS – I (BS PS ZC311)	WILP
2	DOSAGE FORM DESIGN (POMZG512)	WILP
3	Applied Industrial Microbiology (2022-CPBIOCON)	WILP

Courses

Cinematic Art
Asian Cinemas and Cultures
Cultural Studies
Introduction to Mass Communication
Technical Report Writing

Teaching

Courses being taught at BITS Pilani, Hyderabad campus (Since August 2017):

Sl.No	Course name	Course type
1	General Biology (BIO F111)	First degree (FD)
2	Biology Laboratory (BIO F110)	First degree (FD)
3	Genetics (BIO F243)	First degree (FD)
4	Instrumental Methods of Analysis (BIO F244)	First degree (FD)
5	Plant Physiology (BIO F312)	First degree (FD)
6	Genomics (BIOT F346)	First degree (FD)
7	Project-oriented courses (LOP- BIO F366, SOP-BIO F266, DOP-BIO F376)	First degree (FD)
8	Molecular Mechanisms of Gene expression (BIO G512)	Higher degree (HD)
9	Plant Biotechnology (BIO G643)	Higher degree (HD)
10	Study in Advanced Topics (SAT) (BITS G513)	Higher degree (HD)
11	WILP Online Course as part of B.Sc. Computer Science: General Biology	First Degree (Online course offered through Coursera)
12	WILP course: Advances in Industrial Microbiology (AIM)	Course taught in collaboration with BIOCON

Courses taught at the Ohio State University (OSU), USA (2003-2010)

Sl.No	Course name	Role	Course type: Designed for
1	Molecular Genetics 605-Molecular Genetics I	Recitation Instructor	Advanced: Master’s and doctoral students
2	Molecular Genetics 606-Molecular Genetics II	Recitation Instructor	Advanced: Master’s and doctoral students
3	Plant Cellular and Molecular Biology (PCMB) 300	Lab and Recitation Instructor	Advanced: undergraduate Biology majors
4	Biology 114: Form, Function, Diversity, and Ecology	Lab and Recitation Instructor	Advanced: undergraduate Biology mjaors
5	Biology 113: Energy Transformation and Development	Lab and Recitation Instructor	Advanced: undergraduate Biology mjaors
6	PCMB 102: Plants, People and the Environment I	Instructor	Introductory: undergraduate non-Biology majors
7	PCMB 101: Introduction to Plant Biology I: Plants, People and the Environment II	Lab and Recitation Instructor	Introductory: undergraduate non-Biology majors
8	Biology 101: Introduction to Biology	Lab and Recitation Instructor	Introductory: undergraduate non-Biology majors
9	Biology 102: Human Biology – A Case Studies Approach	Lab and Recitation Instructor	Introductory: undergraduate non-Biology majors
10	Biology102: Human Biology (Biology in films)	Recitation Instructor	Introductory: undergraduate non-Biology majors

Mentoring Experience at the Ohio State University (OSU) and Indiana University (IU), USA

· Mentored new teaching associates at the Center for Life Sciences Education, OSU.

· Mentored undergraduate students and international visiting scientists in research at OSU and IU (USA).

· Served as Orientation Facilitator on two different topics (Teaching & Learning; International Teaching Associates panel) during 2009 orientation for new Teaching Associates and faculty members at OSU (USA) organized by UCAT (University Center for Advancement of Teaching)

Qualification in National Eligibility Tests

· National Eligibility Test for Lectureship in the subject of Life Sciences conducted by Council of Scientific & Industrial Research (CSIR), New Delhi, India, during 1999.

· National Eligibility Test for Lectureship/Assistant Professorship in Genetics (1999), conducted by Agricultural Scientists Recruitment Board (ASRB), New Delhi.

Courses

CDC

Electro Magnetic Theory I
Optics
Electromagnetic Fields and Waves (EEE Students)
Statistical Mechanics
General Mathematics

Electives

Introduction to Quantum Information and Quantum Computing
Applied Stochastic Processes
Advanced Solid State Physics
Quantum Optics
Particle Physics

Tutorials

Mechanics waves and Oscillations
Electrical sciences

Lab

Physics Lab I
Modern Physics Lab
Electro Magnetic Optics Lab

Courses

Molecular Immunology BIO-G514
General Biology BIO-F111
Biology Laboratory BIO- F110
Instrumental Methods of Analysis BIO-F244
Immunology BIO-F342

Teaching

Post Graduate Level Courses

Transportation Planning: CE G565
Transportation Data Analytics: CE G572
Public Transportation: CE G566
Freight Transportation: CE G575
Highway Design: CE G535
Traffic Engineering and Safety: TEPWG ZG536

Under Graduate Level Courses

Highway Engineering Tutorial: CE G244
Highway Engineering Lab: CE G244

Teaching Experience

Summer Semester 2024: Operating System - Tutorial (CSF372), BITS Pilani, Hyderabad
Summer Semester 2024: Computer Programming Tutorial (CSF111), BITS Pilani Hyderabad
Summer Semester 2022: Lectures on Course Module: Computer Vision and Image Analysis (CVIA), University of Luxembourg, Luxembourg
Summer Semester 2019: Teaching Assistant on Course Module: Computer Vision, Object, and People Tracking, University of Kaiserslautern, Germany
Summer Semester 2021: Teaching Assistant on Advanced Computer Vision and Deep Learning, University of Kaiserslautern, Germany

Courses

Code	Course Name	UG/PG	Year	Institute
MEC 208	Engineering Materials (Lecture) [Credit-5]	UG	2010, 2011	LPU
MEC 532	Advanced Composite Materials (Lecture) [Credit-3]	PG	2016	LPU
MEC 483	Mechanical Behavior of Materials (Lecture) [Credit-3]	PG	2016	LPU
DE G513	Tribology (Lecture + Laboratory) [Credit-5]	PG	2020, 2021	BITS, HYD
MST G522	Advanced Composite Materials (Laboratory) [Credit-2]	PG	2019	BITS, HYD
BITS F412	Practice School	UG	2019	BITS, HYD
DE G522	Design Project (Research) [Credit-5]	PG	2020	BITS, HYD
BITS F110	Engineering Graphics (Laboratory + Tutorial) [Credit-2]	UG	2019, 2020, 2021	BITS, HYD
DE G631	Materials Technology & Testing (Lecture + Laboratory) [Credit-5]	PG	2019, 2020, 2021, 2022	BITS, HYD
ME G641	Theory of Elasticity & Plasticity (Laboratory) [Credit-2]	PG	2019	BITS, HYD
ETZ C416/ PEZ C413	Production Planning & Control (WILP - Lecture) [Credit-3]	Working Professional	2020	BITS, HYD
DEZ G663	Concurrent Engineering (Lecture + Laboratory) [Credit-5]	PG	2021, 2022	BITS, HYD
DEZ C663/ QMZ G663	Concurrent Engineering (WILP - Lecture) [Credit-3]	Working Professional	2021	BITS, HYD
ENGG ZC332/ PEZ C234	Engineering Materials (WILP - Lecture) [Credit-3]	Working Professional	2022	BITS, HYD
ME F216	Materials Science and Engineering (Laboratory) [Credit-1]	UG	2022	BITS, HYD
ME F112	Workshop Practice (Laboratory) [Credit-2]	UG	2022	BITS, HYD
ME F320	Engineering Optimization (Tutorial) [Credit-1]	UG	2022	BITS, HYD

Courses

1) Mechanics, Oscillations and Waves.

2) Physics Laboratory.

3) Introduction to Quantum Field Theory

4) Electromagnetic Theory-1

5) Study Project

Courses

Principles of Economics
Microeconomics
Game Theory and its Applications
Regional Economics

Courses

Graduate Courses

Advanced Physical Pharmaceutics
Pharmaceutical Biotechnology
Clinical Research
Research Methodology
Advanced Pharmaceutical Technology (WILP)

Undergraduate Courses

Physical Pharmacy
Biopharmaceutics
Pharmaceutical Formulations
Pharmaceutical Management and Quality Control
Dispensing Pharmacy
Disinfection and Sterilization Processes (WILP)

Courses

Introduction to Disability Studies (HSS F248)
Caste and Gender in India (HSS F369)
Cinematic Adaptation (HSS F325)
Literary Criticism (HSS F335)
Technical Report Writing (BITS F112)

Courses

Teaching Experience (F – FALL, S – SPRING)

Coursework
*Associate Professor, BITS-Pilani, Hyderabad*
2021 -	Courses Proposed CE GXXX: Nondestructive Evaluation of Structures CE GXXX: Climate Change Adaptation in Structural Engineering *Graduate Courses* CE G562: Advanced Concrete Technology (F24, S24, F23, F21) Undergraduate Courses CE F320: Design of Reinforced Concrete (F24, F23, F22, S22, F21) CE F416: Computer Applications in Civil Engineering (S22, S23) CE F242: Construction Planning and Technology (S24) BITS F110: Engineering Graphics Laboratory (S22, S23)
*Assistant Professor, BITS-Pilani, Hyderabad*
2015 - 2021		Courses Developed CE F416: Computer Applications in Civil Engineering CE G562: Advanced Concrete Technology
		Graduate Courses Taught CE G617: Advanced Structural Analysis (F20, F19, F18, F17, F16) CE G562: Advanced Concrete Technology (F23, S21, S20, F19, F18, F17)
		Undergraduate Courses Taught CE F320: Design of Reinforced Concrete (F23, F22, S22, F21, F20, F19) CE F416: Computer Applications in Civil Engineering (S22, S21, S20, S19, S18, S17, S16) BITS F110: Engineering Graphics Laboratory (F21, F20, S19, S18, S16) CE F230: Civil Engineering Materials Laboratory (F18) MATH F113: Probability and Statistics (S17) CE F311: Design of Reinforced Concrete Structures (F16, F15)

Courses

Courses Taught in the past semesters:

Higher Degree Courses

Coding Theory and Practice
Advanced Digital Communications
Applied Estimation Theory
Advanced Wireless Communications

First Degree Courses:

Communication Networks Tutorials
Microprocessors
Communication Systems Lab
Electromagnetic Fields and Microwave Engineering Tutorials

Current Semester:

Mobile and Personal Communications - Higher Degree
Advanced Digital Communications - Higher Degree

Courses

CS F211 Data Structures and Algorithms (Tutorial & Practical )

CS F363 Compiler Construction (Practical)

IS ZC363 Data Structures and Algorithms (WILP Course)

CS G526 Advanced Algorithms and Complexity (IC)

CS F214 Logic in Computer Science (IC)

BITS F232 Foundations of Data Structures (IC)

CS F222 Discrete Structures for Computer Science (Tutorial)

CS F351 Theory of Computation (Tutorial)

Courses

1. Power Electronics

2. Electrical Sciences

3. Transducers and Measurement Systems

4. Digital Image Processing

5. Electrical Machines

6. Control Systems

7. Power Semiconductor Drives

8. Circuit Theory

9. Network Analysis

10. Switching Theory and Logic Design

BITS F110 Engineering Graphics

ME G532 Machine Tool Engineering

Courses

1) Theory of Relativity

2) Mathematical Methods of Physics

3)Mathematics 3 (Differential equations)

4) Mechanics Oscillations and Waves (Instruction and Tutorials)

5) Calculus (WILP)

6) Physics Lab

7) General Relativity and Cosmology

8) Classical Mechanics

New courses proposed and taught :

1) Geometrical Methods in Physics.

Courses

As an instructor, I have achieved the following:

I have had the opportunity to teach 17 unique courses (multiple times) over a span of 6 Years (2017-22). I taught/co-taught full lectures, labs, and tutorials for a wide variety of courses listed below.
Successfully taught courses with student populations exceeding 500, demonstrating my ability to manage and engage with large numbers of students.
Managed a team of more than 10 co-instructors, effectively coordinating efforts, providing guidance, and ensuring consistent teaching standards across the team.
Collaborated closely with co-instructors to design and deliver courses, fostering a cohesive learning experience for students and achieving positive outcomes through effective teamwork.
Utilized innovative teaching methods, such as incorporating interactive activities and technology, to enhance student engagement and understanding, resulting in improved learning outcomes.
Received positive student feedback (8-10) and evaluations, highlighting my effectiveness as an instructor and my ability to connect with and positively influence students' learning experiences.
Actively pursued ongoing professional development teaching learning activities to enhance my teaching skills and stay updated with the latest educational practices, research areas in the field of biology reflecting my commitment to continuous improvement and growth as an instructor.

2017-2018: SemI (Aug 2017-Dec 2017)

BIO F212 : MICROBIOLOGY + IC + Lec (Full) + Lab (Co-taught with co-instructors) + 1 Tut (Full)

BIO F111 : GENERAL BIOLOGY - 1 Tut (Full) [Course has >500 students]

2017-2018: Sem II (Jan 2018-May2018)

WILP: BITS BIOCON AIM 3 : Pharmaceutical Microbiology (Co-Taught)

BIO F111 : GENERAL BIOLOGY - 1 Tut (Full) [Course has >500 students]

BIO F342 : IMMUNOLOGY- IC + Lec (Co-Taught; Half course) + Tut (Co-Taught; Half course)

BIO G523 : ADV & APPLIED MICROBIO + Lec (Co-Taught; Half Course)

2018-2019: Sem I (Aug 2018- Dec 2018)

WILP: BITS BIOCON AIM4 : Pharmaceutical Microbiology (Co-Taught)

BIO F212 : MICROBIOLOGY IC + Lec (Full) + Lab + Tut (Full)

BIO F211 : BIOLOGICAL CHEMISTRY + Lec (Co-Taught; Half Course) + Tut (Co-Taught; Half Course)

BIO F266 : STUDY PROJECT - IC

BIO F366 : LABORATORY PROJECT - IC

BIO F367 : LABORATORY PROJECT - IC

BIO F376 : DESIGN PROJECT - IC

BIO F377 : DESIGN PROJECT - IC

2018-2019 : Sem II (Jan 2018-May 2018)

BIO F111 : GENERAL BIOLOGY + Lec (Co-Taught; Half Course) + 1 Tut (Full) [Course has >500 students]

BIO G523 : ADV & APPLIED MICROBIO + Lec (Co-Taught; Half Course)

2019-2020 : Sem I (Aug 2019-Dec 2019)

BIO F110 : BIOLOGY LABORATORY + IC + 1 Section (Full) [Course has >500 students]

BITS F225 : ENVIRONMENTAL STUDIES + IC + Lec (Co-taught; ⅓ course)[Course has >500 students]

BIO F212 : MICROBIOLOGY + IC + Lec (Full course) + Lab (Co-taught with co-instructors)

2019-20 : Sem II (Jan 2019-May 2019)

WILP: SSTM ZG512 : Sanitation and Public Health (Co-taught)

BIO F111 : GENERAL BIOLOGY 1 Tut (Full) [Multi-section course has >500 students]

BIO F244 : INSTRU METHODS OF ANAL (Lab) (Co-taught)

BITS F467 : BIOETHICS & BIOSAFETY + IC + (Co-taught, half course)

2020-21: Sem I (Aug 2020-Dec 2020)

BIO F211 : BIOLOGICAL CHEMISTRY + IC + Lec (Full course) + Tut (Co-taught with co-instructor)

BIO G514 : MOLECULAR IMMUNOLOGY + Lec (Co-taught, half course)

2020-21: Sem II (Jan 2021-May2021)

BIO F111 : GENERAL BIOLOGY + 1 Tut (Full) [Multi-section course has >500 students]

BIO F212 : MICROBIOLOGY + IC + Lec (Full course) + Lab (Co-taught with co-instructors)

2021-2022: Sem I (Aug 2021-Dec 2021)

BIO F212 : MICROBIOLOGY + IC + Lec (Full) + Lab (Full with co-instructors)

BITSF467: BIOETHICS & BIOSAFETY + IC + Lect (Half course, co-taught)

2021-2022 : Sem II (Jan - May 2022)

BIO G523 : ADV & APPLIED MICROBIO + Lec (Half course, co-taught)

BIO F111 : GENERAL BIOLOGY Part 1 - IC [Multi-section >250 Students]

2021-2022 Sem II (May-August 2022)

BIO F111 : GENERAL BIOLOGY Part 2 - IC + Lec (Half course) + 1 Tut (Full) [Multi-section >300 students]

2021-2022: Summer Term (May - Aug 2022)

BITS F467 : BIOETHICS & BIOSAFETY + IC + Lec (Full course)

2022-2023 : Sem I (Aug 2022-Dec 2022)

BIO F212 : MICROBIOLOGY - IC + Lec (Half course, co-taught) + Lab (Full with co-instructors)

2022-2023: Sem II (Jan 2023-May 2023)

BIO G523 : ADV & APPLIED MICROBIO +IC + Lec (Half course, co-taught) + Lab (Full with co-instructors)

2022-2023 : Sem II (March 2023-July 2023)

BIO F111 : GENERAL BIOLOGY - 1 Tut (Full) [Multi-section >500 students]

Courses

Undergraduate Level Courses:

Engineering Graphics
Remedial Mathematics
Construction Planning and Technology
Civil Engineering Practice
Geodesy
Surveying
Civil Engineering Materials
Mechanics of Solids
Measurement Techniques – II
Soil Mechanics and Foundation Engineering
Soil Mechanics
Foundation Engineering
Transportation Engineering
Highway Engineering
Airport, Railways and Waterways
Soil Mechanics
Foundation Engineering
Mechanics of Solids
Lab Oriented Projects
Study Oriented Projects
Computer Projects
Design Projects
BE Thesis

Post Graduate Level Courses:

Advanced Composite Materials for Structures
Pavement Material Characterization
Pavement Analysis and Design
Pavement Design Maintenance and Management
Pavement Management Systems
Asset Management Systems
Pavement Maintenance
Highway Geometric Design
Airport Planning, Design and Management
Pavement Evaluation Field Project
Professional Practice – I
Research Practice - 1
Research Methodology – I
ME Dissertation

Courses

General Chemistry for 1st year students
General Chemistry Laboratory for 1st year students
Physical Chemistry - IV for M. Sc. (Hons.) students
Chemical Experimentation Lab course for M. Sc.(Hons.) students
Instrumental Methods of Analysis Lab session for M. Sc.(Hons.) students
Nanochemistry (elective). This course has a compulsory lab component.
Chemistry of Materials (elective)

Courses

Higher Degree Courses

Pharmacokinetics and Clinical Pharmacy

Dosage Form Design

Advanced Drug Delivery Systems

Pharmaceutical Biostatistics

Quality by Design in Pharmaceutical Product Development

First Degree Courses

Industrial Pharmacy

Pharmaceutical Formulations and Biopharmaceutics

Process Engineering

Pharmaceutical Unit Operations - I

Pharmaceutical Unit Operations - II

Work Integrated Learning Program (WILP) Courses

The following short term courses were designed and are being taught to executives of Sun Pharmaceutical Industries Ltd.:

Biostatistics

Pharmacokinetics

Design of Experiments (DoE)

Biopharmaceutics

Foundation Courses for Undergraduate Students :

Mechanics, Oscillations & Waves (Physics - I)
Electromagnetic Theory - I (Physics - II)
General Physics
Structure and Properties of Materials
Mechanics, Oscillations and Waves Lab

Compulsory Disciplinary Courses for M.Sc Physics Students :

Solid State Physics
Atomic and Molecular Spectroscopy
Advanced Physics Lab
Modern Physics Lab
Electromagnetism and Optics Lab
Instrumental Methods of Analysis
Introduction to Nanoscience (Elective Course)
Thin Film Technology (Elective Course)

WILP Courses :

Engineering Materials (ENGG ZC232 ; Non - Specific Course )
Engineering Materials (PEAB ZC232 ; Specific Course)

Ph. D Courses :

Materials Physics
Materials Science

Courses

On Campus:

Advanced Calculus
Complex Variables
Linear Algebra
Probability & Statistics
Mathematics-I
Mathematics-II
Optimization
Operations Research
Numerical Analysis
Differential Geometry
Queuing Systems
General Mathematics II

Off Campus:

Engg. Mathematics-I
Engg. Mathematics-II
Probability & Statistics
Optimization
Linear Algebra & Optimization

Courses offered

Disaster and Development
Humanistic Theory of Science and Technology
Science Technology and Modernity
Introduction to Philosophy of Science
Environment, Development and Climate Change

Courses

Thermodynamics
Fluid mechanics
Heat transfer
Refrigeration and air conditioning
Prime movers and fluid machinery
Power plant engineering
Measurement techniques
Workshop practice
Engineering materials
Mechanics of solids
Renewable energy
Energy systems engineering
Wind energy
Energy Management

Projects/First degree theses/ Higher degree dissertations guided/guiding

· More than 60 projects/theses/Dissertations covering various areas of research viz. Energy efficiency in process industries, application of multi – criteria analyses based decision making models using fuzzy logic principles, use of geographic information systems for the estimation of energy demand for solar energy utilization, techno – economic analysis of solar hot water systems; Heat transfer; Refrigeration and air conditioning; Web based survey and analysis of survey data; Automation of Practice school division of BITS, Pilani; Software developmental projects for computerization of various activities of Academic Registration and Counselling Division (ARCD) of BITS, Pilani – Hyderabad Campus (please see “Academic administration activities” for more details).

· First-degree thesis in the area of modifications of heat and momentum transfer analyses of liquid flat plate collectors.

· Higher Degree dissertation in the area of automation of Practice School Division.

Specific accomplishments/Distinctions

· Rated as one of the excellent teachers of Thermal Engineering courses at BITS, Pilani, Dubai and Hyderabad Campuses

· Delivered a lecture on Thermodynamics in the presence of Dr. Abdul Kalam, Ex- President of Republic of India during his visit to BITS, Pilani Dubai campus

Lab establishment activities

As a faculty member of Thermal Engineering, established

· Three laboratories viz. Transport Phenomena, Prime Movers & Fluid Machines and Renewable energy laboratories at BITS, Pilani – Hyderabad Campus.

· Two laboratories viz. Transport Phenomena and Prime Movers & Fluid Machines at BITS Pilani Dubai campus starting from the identification of vendors to inspection to the commissioning of the equipment.

· different thermal engineering/energy related equipment for Thermal engineering laboratories at BITS, Pilani

Equipment procured include various equipment to study thermo-physical properties of materials, convective heat and mass transport equipment, heat exchange equipment, various fluid flow measuring devices, various types of Internal combustion engines, turbines, compressors, pumps etc. along with test rigs and data acquisition systems.

Courses

Foundation Courses for Undergraduates

PHY F111 - Mechanics, Oscillations, and Waves
PHY F112 - General Physics
PHY F212 - Electromagnetic Theory 1
EEE F111 - Electrical Science 1
PHY F110 - Physics Lab 1

Compulsory Discipline Courses for M.Sc. (Hons.) Physics

PHY F242 - Quantum Mechanics 1
PHY F341 - Solid State Physics
PHY F214 – Electromagnetism & Optics Lab
PHY F244 - Modern Physics Lab
PHY F344 - Advanced Physics Lab

Elective Courses

PHY F379 - Thin Film Technology
PHY F417 - Experimental Methods of Physics
PHY F414 - Physics of Advanced Materials
BITS F416 - Introduction to Nanoscience

PhD Courses

PHY G531 - Selected Topics in Solid State Physics
BITS G649 – Reading Course

Study and Lab Oriented Projects

Magnetic Thin Films and Nanostructures
Micromagnetic Simulations
Non-Destructive Testing of Materials
Flexible magnetoimpedance sensor

Courses Taught

Post Graduate level:

ME G 511 Mechanisms and Robotics
MSE G511 Mechatronics
ME G532 Machine tool Engineering

Graduate level:

MF F311 Mechatronics and Automation
BITS F110 Engineering graphics
BITS F110 Workshop practice
ME F211 Mechanics of solids
ME F244 Kinematics & Dynamics of Machinery
ME F213 Materials Science & Engineering
MF F341 Design of Machine Tools
BITS F441 Robotics
BITS F327 Artificial Intelligence for Robotics
ME F221 Mechanisms and Machines

Off campus courses:

Engineering measurements
Mechanical technology
Maintenance & safety
Mechatronics and Automation
Mechanical Engineering Design

UG Courses

Fall Semester 2024-2025

ECE F311: Communication Systems

EEE F311: Communication Systems

ECE F314: Electromagnetic Fields & Microwave Engineering

Courses

Analog and Digital VLSI Design
Microelectronic Circuits
Electronic Devices
Analog Electronics
Electrical Sciences
Advanced VLSI Architectures

List of Courses

1. Chemical Process Technology - CHE F419 (4 Semesters)

2. Thermodynamics Lecture &Tutorials - BITS F111 ( 4 Semesters)

3. Corrosion Engineering - CHE F433 (5 Semesters )

4. Materials Science & Engineering / Engineering Materials (4 Semesters)

5. Measurement Techniques 2 lab - TA C222 (3 Semesters)

6. Separation Processes II - CHE F313 (4 Semesters)

7. Fluid Mechanics - CHE F212 (3 Semesters)

8. Environmental Pollution Control - CHE F411 (3 Semesters)

9. Composite Materials and Design - ME F452 / Advanced Composites - DEZG 526 (2 Semesters) (Semester-1/2020-21: 8 hrs video recording for WILP)

10. Chemical Engineering Laboratory 2 - CHE F341 (3 Semesters)

11. Materials Processing - MST F332 (4 Semesters)

12. Introduction to Nanoscience & Technology - CHE G528 (1 Semester)

13. Paper and Pulp Technology - CHE G529 (1 Semester)

14. Chemical Engineering Laboratory 1 - CHE F312 (2 Semesters)

15. Process Equipment Design - CHE F412 ( 6 semesters including WILP)

16. Biological treatment Principles and Design for wastewater systems (1 Semester)

17. Advances in Materials, Composites and Plastics-AEZG612 (1 Semester)

18. Research Methodology - BITS G661 ( 2 Semesters)

19. Environmental Studies - BITS F225 (2 Semesters)

What I teach

Economic Analysis of Public Policy
Game Theory & Its Applications (Some of my lectures on Game Theory can be accessed here: Game Theory & Its Applications )
Issues in Economic Development (Some of my lectures on Development Economics can be accessed here: Durgeshonomics)
Indian Economic Development
Macroeconomics
Microeconomics
Industrial Economics
Principles of Economics
Public Finance
Money, Banking, and Financial Markets

Advanced Physical Chemistry (Chem G553)

Teaching

2023-2024

Digital Design (UG)
Electromagnetic Theory (UG)
Electrical Science (UG)
RF Microelectronics (PG)
Microprocessor and interfacing (UG)
Analog Electronics (UG)

2024-2025

RF and Microwave Eng (PG)
Electromagnetic Theory (UG)
EM fields and Microwave Eng (UG)

PHA F312 Medicinal Chemistry 1 (Instructor)

Teaching Experience

2007-2010 : BITS Pilani Pilani Campus

2010- ........ : BITS Pilani Hyderabad Campus

Courses

Courses Teaching in First Semester 2024-2025 at BITS Pilani, Pilani Campus:

1) Lean Manufacturing (First degree course)

Courses Taught in Second Semester 2023-2024 at BITS Pilani, Dubai Campus:

1) Manufacturing Processes (First degree course)

2) Quality Control, assurance and reliability (First degree course)

Courses Taught in First Semester 2023-2024 at BITS Pilani, Dubai Campus:

1) Manufacturing Management (First degree course)

2) Lean Manufacturing (First degree course)

3) Workshop Practices (First degree course)

Courses Taught in Second Semester 2022-2023 at BITS Pilani, Dubai Campus:

1) Manufacturing Processes (First degree course)

2) Machine Tool engineering (Higher degree course)

Courses Taught in First Semester 2022-2023 at BITS Pilani, Dubai Campus:

1) Manufacturing Management (First degree course)

2) Industry 4.0 in Manufacturing (First degree course)

Courses Taught in Second Semester 2021-2022 at BITS Pilani, Dubai Campus:

1) Manufacturing Processes (First degree course)

2) Workshop Practices (First degree course)

3) Product Design (Higher degree course)

Courses Taught in First Semester 2021-2022 at BITS Pilani, Dubai Campus:

1) Advanced Manufacturing Processes (First degree course)

2) Workshop Practices (First degree course)

3) Computer Aided Analysis and Design (Higher degree course)

Courses Taught in Second Semester 2020-2021 at BITS Pilani, Dubai Campus:

1) Manufacturing Processes (First degree course)

2) Workshop Practices (First degree course)

3) Computer Aided Design (First degree course)

Courses Taught in First Semester 2020-2021 at BITS Pilani, Dubai Campus:

1) Production Techniques II (First degree course)

2) Workshop Practices (First degree course)

3) Theory of Elasticity and Plasticity (WILP Higher degree course)

4) Lean Manufacturing (Higher Degree Course)

Courses Taught in Summer Semester 2019-2020 at BITS Pilani, Dubai Campus:

1) Total Quality Management (Higher Degree Course)

Courses Taught in Second Semester 2019-2020 at BITS Pilani, Dubai Campus:

1) Production Techniques I (First degree course)

2) Computer Aided Design (First degree course)

3) Machine Tool Engineering (Higher degree course)

Courses Taught in First Semester 2019-2020 at BITS Pilani, Dubai Campus:

1) Production Techniques II (First degree course)

2) Quality Control, assurance and reliability (First degree course)

3) Tribology (Higher degree course)

Courses Taught in Second Semester 2018-19 at BITS Pilani, Dubai Campus:

1) Production Techniques 1 (First degree course)

2) Production and Operations Management (Higher degree course)

Courses Taught at Thapar Institute of Engineering and Technology, Patiala, India (Sept 2015-Jan 2019):

1) Industrial Metallurgy and Materials (Undergraduate course)

2) Manufacturing Processes (Undergraduate course)

3) Metal Forming (Undergraduate & Post Graduate course)

4) Operations Management (BE-MBA, Dual degree course)

5) Manufacturing Technology (Undergraduate course)

6) Capstone Project (Undergraduate course)

August to December 2024

Electronic Devices (1h of tutorial per week)
Electronic Instruments & Instrumentation Technology (4h of labs per week)

Courses

COURSES Taken in BITS

Following different courses taught/currently teaching (including WILP)
On-campus
Thermodynamics (BITS F111)
Heat Transfer Operation lab (CHE C351)
Petroleum Ref & Petrochemicals (CHE G512)
Measurement Tech. II (TA C222)
Mass Transfer Operation (CHE C361)
Control system (AAOC C321)
Kinetics reactor design ( CHE F311 & CHE C312)
Process dynamics and Control (CHE F342)
Environmental Pollution Control (CHE F411)
Chemical Engg Lab-II (CHE F341)
Chemical engineering thermodynamics (CHE F213)
Petroleum refinery Engineering (CHE G617)
Research methodology-1 (BITS G661)
Engineering chemistry (CHE F214)
Study oriented project CHE F266/F267
Lab oriented Project CHE F366/367
Environmental studies (BITS F225)
Separation process -II (CHE F313)
Reaction Engineering (CHE G641)
Off campus (WILP)
Environmental Pollution Control (POWAB ZC411)
Transport Phenomena (PERL ZC316)
Environmental Pollution Control (PERL ZC361)
Fundamental of transport process (PE ZC318)

WILP Courses

SS ZG527 Cloud Computing (IC )

Previous Semesters

CS F111 Computer Programming (IC)
CS F301 Principles Of Programming Language (Instructor)
BITS F466 Service-Oriented Computing (IC)
IS F341 Software Engineering (IC)
CSG527 Cloud Computing (IC)
BITS G553 Real-Time Systems (IC)
CS F213 Object-Oriented Programming (IC)
CS G516 Advanced Database Systems (IC)
CSF212 Database Systems (Instructor)

Current Semester

CSF111 COMPUTER PROGRAMMING (Role: IC)
CSF212 DATABASE SYSTEMS (Role: Instructor)

Classroom Courses

Fall 2024

EEE G626: Hardware-Software Codesign (MSc Embedded Systems)

This is a hands on course focusing on Xilinx Zynq SoC platform-based system design. Students are expected to have background in Verilog HDL and C programming language. Detailed couse handout can be found Here

Lecture 1 : Introduction [Slides]
Lecture 2 : Overview [Slides]

Courses/Labs

I will be teaching the first-year course "Mechanics, Oscillation, and Waves" in the coming Sep 2024-Jan 2025.
I will also be taking the Physics Lab for the above mentioned semester.

Teaching

In Semester 1, 2024-25, I am teaching the following two courses: (i) Quantum Mechanics for Engineers(PHYF345)-an undergraduate course and (ii) Quantum Theory & Applications(PHYG514)- a PhD level course.

Earlier semester(s):

In Semester 2, 2023-24, I have taught the course Electromagnetic Theory II.
In Semester 1, 2023-24, I have taught the course Electromagnetic Theory I.
In Semester 2, 2022-23, I have taught (i) Astronomy and Astrophysics and (ii) Mechanics, Oscillations and Waves.
In Semester 1, 2022-23, I have taught (i) Statistical Physics & Applications and (ii) Particle Physics
In Semester 2, 2021-22, I have taught (i) Quantum Mechanics I and (ii) General Theory of Relativity and Cosmology.
In Semester 1, 2021-22, I have taught (i) Quantum Physics and Application and (ii) Statistical Mechanics.
In Semester 2, 2020-21, I have taught (i) Theory of Relativity and (ii) Cosmology.
In Semester 1, 2020-21, I have taught (i) Particle Physics and (ii) GTR and Cosmology.

The set of courses that I taught in BITS: I have taught the following courses: (i)Mechanics, Oscillations & Waves, (ii) Electrodynamics, (iii) Classical Mechanics,

(iv)Quantum Mechanics I & II, (v) Modern Physics, (vi)Statistical Mechanics, (vii)Mathematics III (Differential Equations and it's application),

(vii) Nuclear & Particle Physics, (viii) Theory of Relativity, (ix)Particle Physics, (x) Introduction to Astronomy & Astrophysics,

(xi)General Theory of Relativity & Cosmology, (xii) Physics Laboratory I, (Xiii) Advanced Physics Lab.

Quantum Mechanics I (PHY F242)

Course description

This course will provide the basic grounding in Quantum Mechanics for the undergraduate students. Topics to be covered in this course are (i) Fundamental concept (Hilbert space, Bra, Ket vectors, Operators, uncertainty relations, Wave functions), (ii) Quantum Dynamics (Time evolution of wave function, the Schrodinger vs Heisenberg picture, SHO), (iii) Angular Momemtum (Rotations and angular momentum commutations relation, spin 1/2 system, eigen values and eigenstates of angular momentum, orbital angular momemtum, angular momentum addition), (iv) Symmetry in quantum mechanics (symmetries, conservation laws and degeneracies, discrete symmetries etc), (v) Time-Independent perturbation theory, non-degenerate and degenerate cases, Stark effect and Zeeman effect. (vi) Variational principle and its application.

Text Books:

TB1: Introduction to Quantum Mechanics, D. J. Griffith, 2nd Edition, Pearson Education.

Reference Books:

RB1: Modern Quantum Mechanics, J. J. Sakurai, Pearson Education, Twelfth Impression, 2013.

RB2: Quantum Physics, S. Gasiorowicz, Wiley 1974.

General Theory of Relativity & Cosmology (PHY F415)

Course description

This course aims to introduce the basic concepts of General Theory of Relativity and it's application in Cosmology i.e. to know the behavior of the universe at large scale. After reviewing basic concepts of special relativity (in 4 vector formalism), the notion of tensor, covariant derivative, geodesics, curvature tensor, Ricci tensor, Ricci scalar, Einstein tensor and hence the Einstein equations will be derived. The Schwarzschild black hole solution of the Einstein equation will be discussed, which will be followed by Physics near the massive objects. The FRW cosmology will be discussed at a length and finally inflationary cosmology will be introduced in brief.

Text Books:

TB1: A short course in General Theory of Relativity, Foster and Nightingale (Springer).

Reference Books:

RB1: S. Weinberg, Gravitation and Cosmology, John Wiley, New York, (1972).
RB2: M. Rowan-Robinson, Cosmology, 3rd edition, Oxford University Press (1996).
RB3: J. A. Peacock: Cosmological Physics, Cambridge University Press (1999).

RB2: Modern Cosmology, Scott Dodelson, Academic Press (2006).

To the students -

For the class schedule, evaluation components, make-up policy, please refer the course handout which are available in your respective google classroom page or LMS quanta page.
For joining into the class, refer the meet-links shared via google calender with you.

Courses Taught/Teaching

ECON F412/FIN F313 Security Analysis & Portfolio Management
ECON F315/FIN F315 Financial Management
MMZG627 Managerial Corporate Finance
BITS G661 Research Methodology
ECON F354/FIN F311 Derivatives and Risk Management
BITS F421T Thesis
BITS F221/BITS F231 Practice School-1
ECON F376 Design Project
ECON F266 Study Oriented Project

Course list

Bachelors Courses

General Chemistry (CHEM F110)

Environmental Science (BITS F225)

First year practical course (CHEM F111)

Masters courses

Instrumental Methods of Analysis (CHEM F313)

Inorganic Chemistry II (CHEM F 241)

Instrumental Analysis lab course (CHEM F314)

PhD courses

Physical Methods in Chemistry (CHEM G554)

Advanced Inorganic Chemistry (CHEM G552)

Student Interaction

Courses:

Most of these courses have been conducted multiple times over the past nine years. The primary objective is to engage learners and facilitate them to find their motivation in each course in a practical, real world based and personalized manner. The courses should add some significant meaning to the learners in terms of skills and comprehension of the workings of the world (both experimental and cerebral are of equal importance, learn by doing is the motto). The learners are encouraged to integrate science and engineering, academic and real world and experimental and simulation techniques.

Engineering Chemistry (second year core course)

Materials Science and Engineering (second year core course)

Materials Characterization (third year Materials Science Minor Program core course)

Materials Processing (third year Materials Science Minor Program core course)

Chemical Engineering Laboratory - I (third year core course)

Chemical Engineering Laboratory - II (third year core course)

Separation Process (third year core course)

Process Control and Dynamics (third year core course)

Chemical Process Technology (elective)

Process plant Safety (elective)

Polymer Technology (elective)

Intro to Nanoscience and Nanotechnology (elective)

Thermodynamics (institute wide course)

Environmental Studies (institute wide course)

Research Methodology (first year Masters core course)

Engineering Materials (non-specific WILP course)

Certification program/courses conducted in Instrumentation, Sensors and Controls at Grasim Industries, Nagda

Laboratory Oriented Project Course:

Topics include Polymerization kinetics, Investigation of polymerization induced phase separation, Development of value-added products from biomaterials and Development of biomaterial formulations for microencapsulation applications by using electrospinning, development of sizing agents for carbon fiber composites, materials characterization to investigate and enhance the performance of phenolic resin based composites and relaxation behavior studies of solid polymer electrolytes in lithium ion batteries) and 3D printing of biopolymers for biomedical applications.

Study Oriented Project Course:

Topics include Development and characterization of biocomposites, Thermodynamic studies of protein and pharmaceutical interactions, Carbon nanotubes for flow sensor applications, Relaxational behavior of complex systems, Amorphization of pharmaceuticals and Development and interfacial characterization of carbon fiber based composites)

Guest lectures provided for course titled Bio-conversion Technology and offered by Dept. of Biological Sciences

Mentoring

Ph.D. Thesis (co-supervisor): Nanomechanical and physico-chemical characterization of keratin proteins in human hair (2014-2019, completed project).
Undergraduate thesis (supervisor): Development of a model based on configurational entropy in studying dynamic heterogeneity and non-linearity for various glassy materials, BITS-Pilani, Hyderabad Campus (2021, completed project).
Undergraduate thesis (supervisor): Thermodynamic and microstructural studies of urea-zein protein composites, BITS-Pilani, Hyderabad Campus (2015, completed project).
Undergraduate thesis (co-supervisor): Development of Bio-based formulations for electrospinning in obtaining nanofibers for encapsulation applications. The project is conducted in collaboration with Dr. Chandra Shekhar Sharma, Dept. of Chemical Engineering, IIT-Hyderabad (2014, completed project).

Courses Taught

Sem I 2024-25 (Ongoing)

BIO F110 BIOLOGY LABORATORY - Instructor-in-charge

BIOT F346 GENOMICS - Instructor-in-charge

Sem II 2023-24

BIO F111 GENERAL BIOLOGY - Instructor & Lecturer

Sem I 2023-24

BIO F110 BIOLOGY LABORATORY - Instructor

BIO G510 APPL OF COMP AND STATS IN BIOLOGY - Instructor-in-charge

Sem II 2022-23

BIO F110 GENERAL BIOLOGY - Instructor

BIOT F346 GENOMICS - Instructor-in-charge

TEACHING

TEACHING INVOLVEMENTS:

Broad Areas: Physical Chemistry, Inorganic Chemistry, Solid state Chemistry, Inorganic Materials Chemistry

Regular BE/MSc Courses: (2010 onward)

2010-2011 1st: Chem C141, Chemistry 1, TAC211, Measurement Technique 1

2010-2011 2^nd:ESGC242, Structure-properties of materials , Chem C 411, Chemical Experimentation

2011-2012 1st:Chem C141, Chemistry 1, TAC211, Measurement Technique

2011-2012 2nd: ESGC242, Structure-properties of materials, Chem C 411, Chemical Experimentation

2012-2013 1^stChem F214, Inorganic Chemistry 1, Chem F111, General Chemistry Chem F110, Chemistry Lab

2012-2013 2^nd ChemC411, Chemical Experimentation, Chem F 110, Chemistry Lab.

2013-14 1^st ChemF214, Inorganic Chemistry 1, Chem F 110, Chemistry Lab.

2013-14 2^nd Chem F 343, Inorganic Chemistry III, ChemC411, Chemical Experimentation(II), Chem F325, Polymer Chemistry.

2014-15 1^st ChemF214, Inorganic Chemistry 1, Chem F326, Solid State Chemistry, Chem F 110, Chemistry Lab.

2014-15 2^nd ChemC411, Chemical Experimentation (II) , Chem F 325, Polymer Chemistry, Chem F 343, Inorganic Chemistry III.

2015-2016 1^st ChemF214, Inorganic Chemistry 1, Chem F326, Solid State Chemistry, Chem F312, Physical Chemistry IV.

2015-16 2^nd ChemC411, Chemical Experimentation (II) , Chem F 343, Inorganic Chemistry III

2016-2017 1^st ChemF214, Inorganic Chemistry 1, Chem F326, Solid State Chemistry, Chem F312, Physical Chemistry IV

2016-17 2^nd Chem C 411, Chemical Experimentation (II) , Chem F 343, Inorganic Chemistry III

2017-2018 1^st ChemF214, Inorganic Chemistry 1, Chem F326, Solid State Chemistry, Chem F312, Physical Chemistry IV

2017-2018 2^nd Chem C411, Chemical Experimentation (II) , Chem F 343, Inorganic Chemistry III

2018-2019 1^st ChemF214, Inorganic Chemistry 1, Chem F312, Physical Chemistry IV, Chem F 110, Chemistry Lab.

2018-2019 2nd Chem F 110, Chemistry Lab. , Chem F 343, Inorganic Chemistry III.

2018-2019 Summer(May-2019-July-2020): Practice School I Faculty (Area: bio-medical/Bio-pharma)

2019-2020 1st Chem F 214, Inorganic Chemistry I, Chem F 110, Chemistry Lab., Chem F 111, General Chemistry

2019-2020 2nd Chem F 110, Chemistry Lab., Chem F 343, Inorganic Chemistry III.

2020-2021 1st Chem F214, Inorganic Chemistry I, Chem F 110, Chemistry Lab., Chem F 111, General Chemistry

2020-2021 2nd Chem F 110, Chemistry Lab., Chem F 343, Inorganic Chemistry III, Chem F 411, Chemical Experimentation, II

2021-2022 1st Chem F214, Inorganic Chemistry I, Chem F 111, General Chemistry, Oct. 2021-Jan 2022

2021-2022 2nd Chem F 110, Chemistry Lab. (SPOT ADM May-Aug. 2022, Chem F 343, Inorganic Chemistry III, Chem F 411, Chemical

Experimentation, II, Chem F 111,General Chemistry (SPOT ADM Jan 29-April 30).
2022-2023 1st Chem F214, Inorganic Chemistry I, Chem F 111, General Chemistry, (Oct. 2022-Feb 2023)

2022-2023 2nd Chem F 110, Chemistry Lab. (March -July 2023, Chem F 326, Solid State Chemistry.

2023-2024 1st Chem F214, Inorganic Chemistry I, Chem F 111, General Chemistry.

2023-2024 2nd Chem F 110, Chemistry Laboratory, Chem F 326, Solid State Chemistry.

Summer Term, 2023-2024, Chem F 366, Laboratory Project.

2024-2025 1st Chem F214, Inorganic Chemistry I, Chem F 111, General Chemistry.

Project and Pre-Phd Courses:

BE and M. Sc. (3-4 units): Lab. Project, Study Project, Designed Project, Special Project

Pre-Phd courses (5-6 level, 5 unit credit): (1) Research Project(I) (Topics/Titles: Synthesis, advanced characterization

and properties study, Advances in analytical chemistry, Application of chemical and Instrumental Techniques for materials synthesis.

(at advanced level)), (2) Research Project (II) (Topic: Fine particle magnetism including structure properties correlation),

(3) Physical Methods in Chemistry.

[*(2006-2010):Domain of Teaching Involvements in courses (Old Curriculum): CHEM I, CHEM II, MT I, MT II, SPM, CE II, CPL

along with project courses (SOP, LOP, COP)]

2021, 1st-Sem Onward :

2021-2022 1st: Design Projects (# students 7), Study Project (# student 1)

2021-2022 2nd: Lab. Project (# students 1), Study Project (# students 3)

Physical Methods in Chemistry, Chem G 554 (Pre-Phd course)

2022-2023 1st: Design Projects (# students 3), Study Project (# student 3)

2022-2023 2nd: Lab. Project (# students 1), Study Project (# students 5)

2023-2024 1st: Lab. Project (# students 3), Study Project (# students 1), Design Project (# students 2)

2023-2024 2nd: Lab. Project (# students 2), Study Project (# students 1), Design Project (# student 2)

Research Projects - I ( BITS G 529) (Pre-PhD), Application of Chemical and Instrumental

Analytical Techniques for materials Synthesis (# students 1)

2024-2025 1st: Lab. Project (# students 1), Study Project (# students 1)

Research Projects - II ( BITS G 539) (Pre-PhD), Structural Characterization and nanomagnetism in

Solid State Materials (# students 1)

Research Methodology- I (BITS E661)

Introduction to Globalization (HSS F317)

Courses

Electrical Sciences EEE F111
Electrical Machines EEE/ECE/INSTR F211
Power Systems EEE F312

Recorded Lecture and Tutorial Videos can be found here : https://www.youtube.com/c/EngineeringDevotion
For subject notes visit https://www.engineeringdevotion.com

Teaching

To be updated soon.

Courses I have taught

At BITS Pilani, Goa Campus

Number Theory
- Sem-I, AY 2023-24
- Sem-II, AY 2022-23
Introduction to Topology
- Sem-I, AY 2022-23
Mathematics-II: Linear Algebra and Complex Analysis*
- Sem-II, AY 2021-22, 2022-23, 2023-24
Mathematics-I: Multivariable Calculus*
- Sem-I, AY 2021-22, 2023-24
Probability and Statistics*
- Sem-II, AY 2021-22

* This is a multi-section course.

At IISER Tirupati

Spring 2020: Rings and Modules
Monsoon 2019: Point set Topology

At IISER Pune (as a TA during my PhD)

Introduction to Proof
Multivariable Calculus
Linear Algebra
Introduction to Computing
Point Set Topology

Online Courses

Verilog HDL with Quartus and Modelsim

In this playlist we go through the fundamentals of Verilog HDL and modelling of basic digital circuit elements using Verilog. The fundamental takeaway is although Verilog syntax looks like other programming languages (such as C) and it is a Turing complete language, it is more of a hardware description language. HDLs were initially introduced more as a way for efficient documentation and simulation and was later adopted for synthesis also. As a hardware designer, the structure and operation of the circuit should be in your mind and you are describing it in Verilog. It is then up to the EDA tools to interpret your description and implement using a target technology (such as FPGA). The main challenge here is to properly and efficiently describe the hardware. For demonstration, we use Modelsim simulator and Intel Quartus but the concept and code can be used with any HDL EDA tools.

Reconfigurable Embedded Systems with Xilinx Zynq APSoC

This playlist provides sample applications implemented on Xilinx Zynq APSoC platform through Xilinx Vivado design suite. Most of the examples follow hardware-software codesign approach and is the base for my hardware-software co-design course. Viewers are expected to be conversant with Verilog HDL and C programming language to follow the contents.

LPC2378 Embedded C Programming with Keil

This playlist contains sample embedded programming for LPC2378 microcontroller. These videos are recorded as part of the Embedded Systems Design Course offered at BITS Pilani, Goa (EEE G512).

Internet of Things (IoT) with Amazon AWS

This playlist introduces Amazon AWS IoT core platform. Since the videos were created a few years back, some of the steps might have changed in the latest AWS platform.

Courses

Professional Ethics, Symbolic Logic, Logic in Computer Science, Introductory Philosophy, Theoretical Approaches to Liberal Studies, Research Methodology, Research Ethics, and Introduction to Contemporary Art

Teaching

Introductory Philosophy
Introduction to Philosophy of Science
Research Ethics
Symbolic Logic
Applied Philosophy

Courses

Embedded System Design
Real Time Systems
Microprocessors and Interfacing
Digital Design
Hardware Software Co-design
Software for Embedded Systems
Digital Image Processing

Courses Taught

Prof. Sachin Waigaonkar is engaged in teaching a diverse array of courses at the university, encompassing both on-campus classes and Work Integrated Learning Programs. His expertise lies in the fields of Manufacturing, Quality Control, and the Design and Manufacturing of advanced materials, particularly Polymer Composites. Some of the courses he instructs include:

First Degree (Undergraduate)

Composite Materials and Design
Quality Control, Assurance and Reliability
Production Techniques-I
Production Techniques-II
Workshop Practice
Thermodynamics

Higher Degree ( Post Graduate)

Advanced Composites
Material Technology and Testing
Product Design

Work Integrated Learning Programme (WILP)

Advances in Materials, Plastics and Composites ( Tata Motors Pune, Cummins India Pvt.Ltd. Pune, Tata Technolgies Pune)
Advanced Composites
Flexible Manufacturing Systems

Courses Taught at Goa Campus

Introduction to Functional Analysis
Mathematics-I (Calculus)
Mathematics-II (Linear Algebra and Complex Analysis)
Mathematics-III (Ordinary Differential Equation and Partial Differential Equations)
Mathematical Methods
Numerical Analysis
Numerical Solution of Ordinary Differential Equations
Nonlinear Optimization
Optimization
Ordinary Differential Equations
Partial Differential Equations

WILP Courses Handled

Optimization

Projects (COP/SOP/LOP)

Numerical Analysis of Transient Response of a Chemical Reactor (Student: Nita Chandrasekhar).
A Computational Approach to Optimality Conditions in Mathematical Programming (Student: Raghav Tripathi).
Finite Element Analysis for One Dimensional Parabolic Equations (Student: P. Ravi Teja).
Improved Iterative Method for Solving Nonlinear Equations (Student: Venu Madhav Rao G.).
Numerical Approximation Based on Crank-Nicolson Scheme for Burger's Equation (Student: V. Sushank Reddy).
Numerical Solution to Nonlinear Partial Differential Equations (Student: M. L. Hari Prasad Raju).
Mathematical Finance Modeling and Risk Analysis (Student: Dnyanesh Abhay Deshpande).
Modeling and Analysis of Automotive Suspension Systems (Student: Bipin Kumar Singh).
Vibration Analysis Using Finite Element Method (Student: Lalit Mohan).
A Penalty Method for Solving Inverse Optimal Problems (Student: Durai Swamy Balachandar).
An Introduction to Mathematical Optimal Control Theory (Student: Aarthi M. Sundaram).
Convex Optimization in Engineering (Student: Subarna Kar).
Numerical Solutions for Partial Differential Equations Using MATLAB (Student: Kapil Sachdeva).
Identifying Facial Patterns Using Principle Component Analysis (Student: K. Narendra).
Facial Recognition by Dimensionality Reduction Using Eigen Values (Student: E. Sasidhar).
Non Linear Optimization and Its Applications (Student: Nitisha Nupur).
Study and Implementation of Simplex Type Algorithms for Solving Linear Programming Problems Using MATLAB (Student: Vipul Pandey).
Study and Implementation of Different Optimization Algorithms Using MATLAB (Student: Chirag R. Agarwal).
Implementation of Genetic Algorithm for Solution of Linear Programming Promples (Student: Sankalp Kulshrestha)
Solving Optimal Control Problems using Differential Equations (Student: Basant Sharma)
Implementation of Nonlinear Optimization Algorithms in Matlab (Student: Mundra Rahul Pannalal)
Control Theory (Student: Rajat Mishra)
Study of Finite Volume Method and Implementation of One Dimensional Heat Equation in MATLAB. (Student: Shreyas Rajagopal)
Finite Element Method and Its Applications to Boundary Value Problems (Student: K. Balaje)
Convex Optimization-Theory, Applications and Modeling in MATLAB with CVX (Student: M. Ramchandran)
Numerical Methods to Solve Ordinary Differential Equations (Student: Ranajoy Roy)
Optimal Control Theory and Its Applications in Epidemiological Models (Student: Ranajoy Roy)
Optimal Control Problems in Biological Models (Student: Aditya Gurjar)
Pseudospectral Optimal Control Theory and Implementation using DIDO (Student: Naman Agarwal)
Optimal Control Problems in Real Life Applications (Student: Aditya Gurjar)
Optimal Control Systems (Student: Meera Ramprasad)
Convex optimization methods for Low Rank Matrix Recovery(Student: Revanth Reddy)
Optimal control problems arising in biological models (Student: Meera Ramprasad)
Control Theory (Student: Dhruv Arora)
Study of Finite Difference Methods to Solve Ordinary and Partial Differential Equations (Vatsal Chowdhary)

TEACHING EXPERIENCE

		No of Students
Course Name	Course ID	2018	2019		2020		2021		2022	2023	2024
		Sem II	Sem I	Sem II	Sem I	Sem II	Sem I	Sem II
Compulsory courses for First Degree
students
Technical Report Writing	BITS F112			80		80		80 (IC)	80	80
Compulsory courses for M.Tech students
Sanitation	SAN G513			4 (IC)
Governance and Behaviour
Electives for First
Degree Students
Public Policy (IC)	GS F233	52	105	95	90	95			75	75
Environment	GS F212	80	80	84	85	90	120	120	70	70	68
Development Climate Change(IC)
Environmental Sustainability	HSSF381		Thisisaveryspecialcoursethataimstohelpstudents buildclimatetechstart-ups,incollaborationwith								50
Ventures (IC)			http://susmafia.org/
Work Integrated
Learning programme Courses
Environmental Studies	BSDCB ZC225						84
							(IC)
Courses for Phd Students
Statistical Computing(IC)									2	2	1
			2		3		2	5
Research Methodology				10		10
Project Courses
Projects			5	5	5	5	5	5	10	10	10
Practice School									30	30

EXPERIENCE OF PROVIDING SHORT TERM TRAINING

Training Event	Context	Venue	Date
Modeling impact of climate change (Hands-on training)	2nd WCRP CORDEX Workshop	ICIMOD, Kathmandu	27-30^th August, 2013
Addressing Climate Change Vulnerability through Climate Resilient and Adaptation	Selected group of Range forest officers (RFOs) of Bangladesh Forest Department	Indian Institute of Science	30^th August – 14^thSeptember, 2015
Forest Carbon Baseline and Monitoring Methods	Selected group of Assistant Conservator of Forest (ACFs) of Bangladesh Forest Department	Indian Institute of Science	30^thSeptember - 14th Oct, 2015
REDD+ and CDM Project Development	Selected group of Divisional Forest Officers (DFOs) of Bangladesh Forest Department	Indian Institute of Science	30^thOctober – 14^thNovember, 2015
Climate Change Projection & Impacts	Selected group of Conservators of Forest (CFs) of Bangladesh Forest Department	Indian Institute of Science	1-10 March, 2016
Assessment of historical Climate Change & Projections: A capacity buidling Programme	Selected group of scientists from each of the ASEAN member countries	Indian Institute of Science	22-28, February, 2016
Climate Data Assessment and Modeling: Analysis of Observed and Projected Climate	Scientists from Environmental Management and Policy Research Institute, Bangalore; Govt of Karnataka	Indian Institute of Science	22-24 March,
Assessments of Climate Change Impacts: Modelling and Capacity Building Programme	Selected group of scientists from each of the ASEAN member countries	Indian Institute of Science	03-08 October, 2016

Courses taught

Semester 1 2023-24

CHE F311- Kinetics and Reactor Design (I)
CHE F312- Chemical Engineering Laboratory-1 (I)

Semester 2 2023-24

CHE F341- Chemical Engineering Laboratory-2 (IC)
CHE F343- Process Design Principles-2 (I)

Teaching courses

Quality Assurance & Regulatory Affairs
Pharmaceutical Administration & Management
Parenteral Product Development
Quality Assurance & Regulatory Affairs (WILP)
Biocon Aim Certification Program (WILP)

Courses Taught

Semester 2, AY: 2023-24

Analog IC Design (MEL G 632) - Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 9-students
Lab Oriented Project (EEE F366/ INSTR F366): 3-student
Research Practice (BITS G 540): 4-students

Semester 1, AY: 2023-24

Advanced Analog & Mixed Signal Design (MEL G 625) – Instructor & IC
IC Fabrication Technology (MEL G 611) – Instructor & IC
Design Oriented Project (ECE F376): 1-student
Lab Oriented Project (EEE F367): 1-student
WILP PG-Project: 1-student

Semester 2, AY: 2022-23

Analog IC Design (MEL G 632) - Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 3-students
Lab Oriented Project (EEE F366/ INSTR F366): 2-students
Research Practice (BITS G 540): 10-students
WILP PG-Project: 5-student

Semester 1, AY: 2022-23

Advanced Analog & Mixed Signal Design (MEL G 625) – Instructor & IC
IC Fabrication Technology (MEL G 611) – Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 1-student
Lab Oriented Project (EEE F366/ INSTR F366): 4-students
Research Practice (BITS G 540): 3-students
WILP PG-Project: 3-student

Semester 2, AY: 2021-22

Analog IC Design (MEL G 632) - Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 3-students
Lab Oriented Project (EEE F366/ INSTR F366): 2-students
Research Practice (BITS G 540): 8-students
WILP PG-Project: 3-student

Semester 1, AY: 2021-22

Advanced Analog & Mixed Signal Design (MEL G 625) – Instructor & IC
Analog & Digital VLSI Design (ECE/ EEE/ INSTR F 313) – Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 4-students
Lab Oriented Project (EEE F366/ INSTR F366): 4-students
WILP PG-Project: 3-student

Semester 2, AY: 2020-21

Microelectronic Circuits (ECE/ EEE/ INSTR F 244) - Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 5-students
Lab Oriented Project (EEE F366/ INSTR F366): 2-students
Research Practice (BITS G 540): 8-students
WILP PG-Project: 3-student

Semester 1, AY: 2020-21

Advanced Analog & Mixed Signal Design (MEL G 625) – Instructor & IC
IC Fabrication Technology (MEL G 611) – Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 3-students
Lab Oriented Project (EEE F366/ INSTR F366): 2-students
Study Oriented Project (ECE/ EEE 266): 2-students
Research Practice (BITS G 540): 3-students
WILP PG-Project: 3-student

Semester 2, AY: 2019-20

Analog IC Design (MEL G 632) - Instructor & IC
Design Oriented Project (EEE F376/ INSTR F376/ EEE F377/ INSTR F377: 4-students
Lab Oriented Project (EEE F366/ INSTR F366): 4-student
Study Oriented Project (EEE F 266 / INSTR F 266 ): 2-student

M. Tech. (Research Practice) Project: Current Enrollment (AY 2016-17): 8

Semester 1, AY: 2019-20

Advanced Analog & Mixed Signal Design (MEL G 625) - Instructor & IC
IC Fabrication Technology (MEL G 611) - Instructor & IC
Design Oriented Project (EEE 376/ INSTR 376/ EEE 377/ INSTR 377) : 4 students
Lab Oriented Project (EEE 366/ INSTR 366/ EEE 367/ INSTR 367): 6 students
Study Oriented Project (EEE 266/ INSTR 266): 3 students

M. Tech. (Research Practice) Project: Completed Guiding (Till AY 2018-19): 12

Course(s) Taught in BITS Pilani, K. K. Birla Goa Campus from AY 2016-17 till AY 2018-19

Microelectronic Circuits (EEE F244/ INSTR F244)
Analog & Digital VLSI Design (EEE F 313/ INST F 313)
Analog Electronics (EEE F 341/ INSTR F 341)
IC Fabrication Technology (MEL G 611)
Analog IC Design (MEL G 632)
Advanced Analog & Mixed Signal Design (MEL G 625)

Course(s) Taught in Earlier Universities/ Institutions

Basic Electronics
Digital Electronics
Analog Electronics
Introduction to VLSI
Analog VLSI Circuits
Telecommunication Switching Circuits
Pulse and Digital Circuits
Discrete & Integrated Analog Circuits

M. Tech Project Guided (in earlier universities): 35

Courses

Manufacturing Management
Introduction to MEMS

Courses

Foundations of Data Science (CS F320)
Computational Learning Theory (BITS F453)
Deep Learning (CS F425)
Computer Programming (CS F111)

Courses Taught

Thermodynamics (BITS F111)
Transport Phenomena-I (ME C212)
Power Plant Engineering (ME C314)
Transport Phenomena-II (ME C331)
Prime Movers and Fluid Machinery (ME C332/ ME F341)
Fluid Mechanics (ME F212)
Heat Transfer (ME F311)
Gas Dynamics (ME F 415)

Teaching Experience

Course Instructor, School of Engineering and Applied Science, Ahmedabad University, India

ENR101 Product Realisation (5 Semesters)
MAT281 Multivariable Calculus (3 Semesters)
FDP104 Water (3 Semesters)
ENR200 Design, Innovation and Making (2 Semesters)
ISP117 Building a Fluidic Neurocomputer (2 Semesters)
MAT203 Differential Equations and Linear Algebra (1 Semester)

Lab Instructor, Department of Engineering, University of Cambridge, UK

1A Electrical Engineering – AC Power Circuits
1A Electrical Engineering – The Iron-Cored Transformer
1A Integrated Electrical Project
1B Mechanics – Dynamic Vibration Absorber
1B Materials – Materials Characterization
1A Digital Circuits – Microprocessor Laboratory
1B Mechanics – Rotor Dynamics
1B Information Engineering – Spectrum Analysis
1A Drawing

Courses

Courses Teaching/ Taught

Principles of Economics
Microeconomics
International Economics
Economic Environment of Business
Development Economics
Principles of Management
Mathematical and Statistical Methods
Resources and Environmental Economics (Developed and Taught as DEL)

Work Experience

Working as Associate Professor, Department of Chemical Engineering at BITS Pilani, Pilani, Rajasthan, India (Current).
Worked as Assistant Professor, Department of Chemical Engineering at BITS Pilani, Pilani, Rajasthan, India (August 2009- May 2021).
Worked as Assistant Professor, Department of Chemical Engineering, Heritage Institute of Technology (under WBUT), Kolkata, India (May 2008-July 2009).
Worked in Information Technology (I.T) Industry with MNCL Inc., Tulsa, U.S.A. (December 2006 to April 2008).

Courses

Courses taught

Under-graduate:

Biology Laboratory
Biology project lab
Cell Biology
Conservation biology
Ecology and environmental science
Environmental Studies
General biology
Microbiology

Post-graduate:

Advanced and applied microbiology
Genetic engineering techniques
Microbial fermentation technology

Course Teaching & Research Supervision

Courses at Dept. of Biological Sciences, Pilani Campus

BIO F111 GENERAL BIOLOGY

BIO F211 BIOLOGICAL CHEMISTRY

BIO F244 INSTRU METHODS OF ANALYSIS

BIO F315 APPLIED NUTRITION & NUTRACEUTICALS

BIOT F424 FOOD BIOTECHNOLOGY

BIO F421 ENZYMOLOGY

BIOT F416 INTRODUCTION TO PHARMACEUTICAL BIOTECHNOLOGY

Collaborative Programmes - Work-Integrated Learning Programmes Division:

2005 - 2018: Involved in teaching of following courses in the collaborative programmes, M.S. (Medical Laboratory Technology), B.S.(Physician Assistant), B.S. (Optometry) and M.Phil (Optometry) that includes classroom lectures and laboratory practicals.

Course Title	Course No.	Units
Basic Biochemistry -1	OPTO ZC141	3
Basic Biochemistry - 2	OPTO ZC162	3
Biological Chemistry	PATFL ZC141	3
Clinical Biochemistry	PATFL ZC152	5
Scientific Measurements	PATFL ZC132	3
Molecular Genetics	PATFL ZC282	3
Food & Nutrition in Health	MLTSN ZG611	4
Enzymology & Metabolism in Health	MLTSN ZG512	3

Few modules in the following courses:
Recent Advances in Optometry	OPTO ZG644	4
Geriatric Optometry	OPTO ZC382	1
Ocular Physiology	OPTO ZC152	3
Technical Communication	MLTSN ZG659	4
Technical Report Writing	PATFL ZC261	3

Practice School Division, BITS Pilani :

2005 - 2018: Involved in mentoring, and evaluation of performance, of Final year First Degree and Higher Degree students pursuing structured Internship (PS-II) course, in research labs/industries at Chennai, Hyderabad, Bangalore & Mumbai.

Practice School-II BITS C412 / BITS C413 / BITS G639 20 Units

2013 - 2018: Involved in mentoring, and evaluation of performance, of Second year First Degree (Integrated and Dual) students pursuing structured Summer-Term Internship (PS-I) course at Medical Research Foundation - Sankara Nethralaya, Chennai.

Practice School-I BITS C221 / BITS C231 / BITS C241 5 Units

************************************************************************************

PhD Thesis Supervision:

Graduated : Three (June 2013, June 2015, June 2016)

On-going students : Four

Broad areas of doctoral dissertation research in our lab: Molecular mechanisms & Pharmacological/Clinical targets in Metabolic Syndrome, Obesity, Non-Alcoholic Fatty Liver Disease (NAFLD), Cancer biology, Lipogenic targets in Cancers and other Chronic Diseases, Nutritional Biochemistry, Bioinformatics, and Protein Biochemistry, Natural Products and Drug-repurposing.

Sponsored Project Research Fellows supervised:

ICMR -SRF: 1 [2011-2014]; DBT-SRF: 1 [2012-2015]

************************************************************************************

Courses

Teaching Experience

I have been teaching different courses in the Department of Biological Sciences since 2005 at both graduate and post-graduate level.

Measurement Techniques for B.E.
General Biology for B.E.
Ecology for M.Sc.
Plant Physiology For M.Sc.
Instrumental Methods of Analysis for M.Sc.
Laboratory for M.Sc.
Plant Biotechnology for M.E.
Environmental Biotechnology for M.E.
Study Oriented Project /Lab Oriented Project /First Degree Thesis and Dissertation.

Courses Taught / Teaching/Planning to Teach

Teaching Engagement

General Biology
Biomolecular Modeling
Biophysics
Bioinformatics
General Biology Laboratory
Laboratory
Biology Project Lab
Introduction to Biomedical Engineering
Biostatistics and Bio-modeling
Biochemistry
Enzymology

Academic Courses

ME Biotechnology

Courses Taken

MOLECULAR MECHANISM OF GENE EXPRESSION

PROTEIN AND ENZYME BIOENGINEERING

ADVANCED CELL AND MOLECULAR BIOLOGY

EXPERIMENTAL TECHNIQUES

M.Sc. Biological Sciences

Even SemesterBiophysics
Even SemesterProteomics
Odd SemesterIntegrated Biology
Odd SemesterBiosafety and Bioethics

Other Courses Taught

Other courses

GENETICS
MOLECULAR BIOLOGY OF THE CELL
GENETIC ENGINEERING TECHNIQUES
BIOLOGY PROJECT LABORATORY
GENERAL BIOLOGY
INSTRUMENTATION METHODS AND ANALYSIS

Coursed Handled/Handling

Undergraduate Courses

Electromagnetic Field Theory

Postgraduate Courses

Power Quality

To be Updated Soon

Teaching

Courses

BIO F110 Biology Laboratory
BIO F213 Cell Biology
BIO F111 General Biology
BIO F231 Biology Project Lab
BIO G642 Experimental Techniques
BIO F313 Animal Physiology
BIO G524 Animal Cell Technology
BITS F418 Introduction to Biomedical Engineering

To be updated.

At Bits-Pilani, K-K Birla Goa Campus:

Mathematical Modelling
Mathematics II (Linear Algebra and Complex Analysis)
Mathematics I (Calculus)
Optimization
WILP- Optimization methods for analytics.
Dynamical systems and ergodic theory( Study course)

At Oregon State University

Differential Equation and applications.
Linear Algebra II

At Oakland University

Calculus I & Calculus II
Precalculus

At University of Houston

Calculus I & Calculus II
College Algebra

Mathematical Modelling
Mathematics II (Linear Algebra and Complex Analysis)
Mathematics I (Calculus)
Optimization
WILP- Optimization methods for analytics.
Dynamical systems and ergodic theory( Study course)

Courses

First Year Courses

BIO F111 General Biology (I Year)
BIO F110 Biology Laboratory (I Year)

Dual Degree Courses

BIO F211 Biological Chemistry (II Year, I semester)
BIO F341 Developmental Biology (III Year, II Semester)
BITS F467 Bioethics and Biosafety (II Semester of academic year)

ME Biotechnology Courses (in Past)

Cancer Biology (ME II Year, I Sem)
Molecular Mechanism of Gene Expression (ME I year, I Sem)

To be updated soon.

Research Experience

Feb 2015- March 2021	UGC-Assistant Professor, School of Computational & Integrative Sciences, Jawaharlal Nehru University, New Delhi, India
Feb 2018- Feb 2019	Indo-US GETin Fellow (IUSSTF-DBT) at Joint BioEnergy Institute, Lawrence Berkeley National Laboratory and UC Berkeley, Berkeley, California, USA
March 2014- Jan 2018	Ramalingaswami Fellow, Jawaharlal Nehru University, New Delhi, India
May 2009- Feb 2014	Postdoctoral Researcher at Department of Plant Pathology and the Genome Centre, University of California, Davis, California, USA

Courses

Current Courses:

General Biology
Environmental Sciences
Recombinant DNA Technology

Courses

Machining and machine tools
Engineering graphics

Teaching Courses:

Courses

Courses Taught:

Gene Toxicology
Integrated Biology
Plant Biotechnology
General Biology
Measurement techniques/Biology Laboratory
Genetics
Biological chemistry
Molecular evolution
Ecology
Cell Biology
Laboratory
Professional Practice I/Research Practice I
Professional Practice II/Research Practice II
COP/SOP/LOP

Courses

Advanced Manufacturing Processes

Teaching Experience:

Involved in course designing and interactive teaching of both first degree (M.Sc. Hons.) and higher degree (M.E. Biotechnology) courses. Some of the course titles where I have been the Instructor – in charge/Instructor are as follows –

Recombinant DNA Technology
Advances in Recombinant DNA Technology
Molecular Immunology
Developmental Biology
Molecular Biology and Immunology
Integrated Biology
Introduction to Bioinformatics
Transgenic Technology
Animal Tissue Culture
Instrumental Methods of Analysis
Experimental Techniques (Laboratory)
Genetic Engineering (Laboratory)
General Biology
Measurement Techniques – I

Apart from these, I also enjoy interacting with/teaching students taking specialized studies and lab projects.

To be updated.

Courses Taught

Semester 1, 2024-2025

Distributed Data Systems
Object Oriented Programming Tutorial

Semester 1, 2023-2024

Machine Learning
Object Oriented Programming Lab

Semester 2, 2022-2023

Data Mining
Database Management Systems Lab

Semester 1, 2022-2023

Data Mining WILP
Software Development for Portable Devices

Semester 2, 2021-2022

Data Mining WILP
Database Management Systems Lab

Semester 1, 2021-2022

Software Development for Portable Devices
Operating Systems Tutorial

Semester 2, 2020-2021

Data Mining WILP
Distributed Data Systems

Semester 1, 2020-2021

Distributed Data Systems
Object Oriented Programming Lab

Semester 2, 2019-2020

Data Mining
Computer Networks Lab and Tutorial

Semester 1, 2019-2020

Distributed Data Systems

Courses

I teach the following courses in Chemistry at first/higher degree level.

Course Code	Course Title
BITS F111	Thermodynamics
CHEM F110	Chemistry Laboratory
CHEM F111	General Chemistry
CHEM F211	Physical Chemistry-I
CHEM F213	Physical Chemistry-II
CHEM F242	Chemical Experimentation-I
CHEM F244	Physical Chemistry-III
CHEM F313	Instrumental Methods of Analysis
CHEM F320	Introductory Computational Chemistry Laboratory
CHEM F324	Numerical Methods in Chemistry
CHEM F341	Chemical Experimentation-II
CHEM F422	Statistical Thermodynamics
CHEM G553	Advanced Physical Chemistry (Higher degree course)

	*Courses from old curriculum:*
CHEM C141	Chemistry-I
CHEM C142	Chemistry-II
CHEM C211	Atomic and Molecular Structure
CHEM C231	Chemistry Project Laboratory
CHEM C422	Statistical Thermodynamics
TA C211	Measurement Techniques-

Research Interest

The ultimate goal of our research is to synthesize novel multi-functional materials and device novel fabrication techniques with a focus to extract superior material performance for a given application. Developing such advanced materials will often require the use of nanomaterials that offer exciting properties. Our research encompasses several components (i.e., synthesis, assembly, characterization, test method development, materials formulation/processing, etc.) designed to give students a very well rounded engineering background. Broadly speaking, the work carried out in colloids and nanocomposites research group is interdisciplinary and at the interface of materials and chemical engineering. The following research projects are currently being undertaken in the CNC research group

Advanced Materials for EMI Shielding and Microwave Absorption: The Electromagnetic Interference can be described as a novel pollutant, which causes malfunctioning in the electronic devices due to wanted EM waves interacting with the device. One way to mitigate such an effect is by shielding the device from all unwanted waves. However, to be good shield, a material needs to have combinations of desirable properties such as high relative permittivity, permeability and conductivity. However, none of the conventional materials have a combination of all these properties, which marks the motivation of advanced materials (hybrid composites) in these applications. Our efforts in this direction are targeted to fundamentally understand the relative interplay between the material properties and its influence on microwave attenuation. The outcome from this research will be useful for applications such as radar absorbing materials and stealth technology.
Design and development of inline sensor for water contamination detection: Water contamination is a growing threat to human survival. Especially, contamination of drinking water with toxic metals poses many risks. There are several filtration solutions to remove toxic metals from water, however, their detection, in real time is still not fully developed . The efforts in this research are focused on developing a "solid state" sensor capable of continuously detecting heavy metals presence in drinking water.
Test Method Development for Releasable Formaldehyde from Artificial Leather Samples: Synthetic or artificial leather is a material used in applications where leather was traditionally used, driven by its low cost and ease of manufacturing. Artificial leather looks and feels much like natural leather, but is made on a fabric base rather than from animal skin. One of the major drawbacks of synthetic leather is the “plastic” type odor that emanates from newly made products. For example, the “new car smell” is often caused by volatile organic compounds (VOCs) such as formaldehyde, released from the synthetic leather upholstery. The International Agency for Research on Cancer (IARC) of the World Health Organization (WHO) has classified formaldehyde as a Group 1 carcinogen. For these reasons, tougher restrictions are being imposed on the free formaldehyde content that can come from synthetic leather fabrics by various countries. The motivation of this research is to develop a robust measurement strategy for determination of free formaldehyde in the artificial leather samples
Development of microporous PVC films for synthetic leather application: Synthetic leather is used in a variety of applications such as, car seats, furniture, shoes, bags etc. The synthetic leather mimics the natural leather in all aesthetic aspects but fails to offer comfort levels similar to its natural counterpart. The research effort in this project is aimed at imparting air and water vapor transmissibility to synthetic leather.

We strongly encourage bright and "motivated" B.E/M.E/Ph.D. (Part time and Full Time) students to join the group for carrying out their projects. Please contact Dr. Krishna Etika for more details.

Courses

@BITS Pilani

Prior to BITS Pilani

@Vignan's (Deemed to be) University, Guntur
16CH102: Materials Science and Technology
16FT206: Fundamentals of Heat and Mass Transfer,
CH402: Colloids and Interface Science
16FT361: Engineering Properties of Food Materials
TT406: Textile Polymer Science

@ Texas A&M University

MEEN 222: Introduction to Materials Science, Instructor

Courses

Courses at BITS Pilani:

Currently teaching:

Data Mining (As IC)
Machine Learning

Taught previously:

Advanced Operating Systems
Business Data Mining (WILP)
Deep Learning (WILP)
Computer Programming
Principles of Programming Languages
Object-oriented programming
Computer Networks
Computer Architecture

Courses taught elsewhere:

Information Security (M.E. (CSE))
Advanced Operating Systems (M.E. (CSE))
Computational Thinking with Python (1st year B.E. - Practicals)
Machine Learning (PhD (CSE) coursework)
Object-oriented Programming with Java (1st year B.E. - Practicals and Tutorials)
Computer Networks (3rd year B.E. (CSE) - Practicals)
Operating Systems (3rd year B.E. (CSE) - Practicals)

Courses

Undergraduate

[CS F213] Object Oriented Programming

Postgraduate

[SS G562] Software Engineering and Management
[SS G653] Software Architectures
[SS G552] Software Testing Methodologies
[SE ZG544] Agile Software Processes (WILP)
[BA ZG525] Big Data Analytics (WILP)

Courses Taught

I have taught 42 full iterations of 14 different courses (except the tutorials). The details are as follows:
Design and Analysis of Algorithms (Undergraduate, 9 times), shared with one instructor in 2017, 2020, 2021, 2022, 2023, and 2024; sole instructor in 2018 (twice) and 2019 at BITS Pilani.
Advanced Algorithms & Complexity (Graduate, 9 times), shared with one instructor in 2015 and 2016; sole instructor in 2018, 2019, 2020 (twice), 2021, 2022 and 2023 at BITS Pilani.
Cryptography (Undergraduate, 9 times), sole instructor in 2016, 2017, 2018, 2019, 2020 , 2022, 2023, and 2024; shared with one instructor in 2021 at BITS Pilani.
Data Structures & Algorithms (Undergraduate, 1 time), shared with one instructor in 2016 at BITS Pilani.
Theory of Computation Tutorial (Undergraduate, 3 times), shared with one instructor in 2016 and 2017; and shared with two instructors in 2023 at BITS Pilani.
Advanced Compilation Techniques (Graduate, 2 times), sole instructor in 2015 and 2017 at BITS Pilani.
Discrete Structures for Computer Science (Undergraduate, 1 time), shared with one instructor in 2019 at BITS Pilani.
Discrete Structures for Computer Science Tutorial (Undergraduate, 3 time), shared with two instructors in 2019, 2020 and 2022 at BITS Pilani.
Design and Analysis of Algorithms Tutorial (Undergraduate, 3 times), shared with one instructor in 2016 and 2020; shared with two instructors in 2021 at BITS Pilani.

Courses

Autonomous Mobile Robotics (Instructor In-Charge)
Advance Operating Systems (Instructor In-Charge)
Object Oriented Programming (Instructor In-Charge)
Object Oriented Analysis and Design (Instructor In-Charge)
Operating Systems (Instructor)
Data Structure and Algorithms (Instructor)
Computer Networks (Instructor)
Computer Programming (Instructor)

TEACHING

Following courses have been taught in BITS and got feedback on teaching (on an average 8.5+ /10) & remark as an "Excellent" from students.

Courses:

10) Power Plant Engineering (ME C314 / ME F420 - BITS On Campus Course), also (Work Integrated Learning Program {WILP} Course PEHC ZC314 designed for engineers of Hindalco Company of Aditya Birla Group)

9) Heat Transfer (ME F311)

8) Applied Thermodynamics (ME F214)

7) Engines Motors & Mobility (ME F317) / IC Engines (ME F242)

6) Fluid Mechanics (ME F212)

5) Thermodynamics (BITS F111)

4) Transport Phenomena - II (ME C311), (POWAB ZC317 for Vedanta - Aditya Birla Group)

3) Power Generation (Work Integrated Learning Program Course {WILP} POWAB ZC322 / ZC313 for Aditya Birla Cement Company and as POWTP ZC322 /ZC313designed for engineers of TATA Power Company, POWJS ZC313 for engineers of JSW (Jindal South West) Energy Group)

2) Production Techniques-I (ME F243)

1) Structure and Properties of Materials (ES C242)

Program / Curriculum / Course Development:

4) Started ME (Mechanical Engineering) program since August 2019.

3) Updated BE (Mechanical Engineering) curriculum. It was approved in Senate (14th August 2020) and implemented. Co-ordinated to update the thermal engineering related courses, and as HoD the overall co-ordinator of Goa campus while updating BE Mechanical Engineering Curriculum.

2) Worked as expert to develop the courses such as (i) Transport Phenomena and (ii) Advance I C Engines for the work integrated learning (WILP) program.

1) Participated in developing minor programs related to Robotics, Aeronautics program.

Courses Taught

Robotics
Control Systems
Advanced Control Systems
Energy Conversion
Electrical Engineering Practice
Electrical Sciences II
Electronics and Instrumentation Engineering Practice
Digital Electronics and Computer Organization
Microprocessor Programming and Interfacing
Computer Networks
Operating Systems
Computer Organization and Software Systems
Computer Architecture
Advance Computer Architecture

Courses Taught

On-campus and Off-campus

S No	Course Title	Postgraduate or Undergraduate	On-campus/ Off-campus
1	Computational Transport Phenomena	PG	On-campus
2	Environmental Management Systems	PG
3	Energy Integration Analysis	PG
4	Mathematical Methods in Chemical Engineering	PG
5	Advanced Separation Techniques	PG
6	Bioremediation & Biometallurgy	PG
7	Microbial Fermentation Technology	PG
8	Process Intensification	PG
9	Chemical Process Optimization	PG
10	Process Design Principles - I	UG
11	Selected Chemical Engineering Operations	UG
12	Process Design Decisions	UG
13	Separation Processes - I	UG
14	Separation Processes - II	UG
15	Numerical Methods for Chemical Engineers	UG
16	Heat Transfer Operations	UG
17	Mass Transfer Operations	UG
18	Chemical Process Technology	UG
19	Measurement Techniques – II	UG
20	Chemical Engineering Laboratory - I	UG
21	Modeling and Simulations in Chemical Engineering	UG
22	Chemical Process Calculations	UG	On-campus/ Off-campus
23	Extractive Metallurgy	UG	Off-campus
24	Environmental Pollution Control	UG
25	Process Equipment Design	UG
26	Process Design Principles	UG

Courses

Courses of Interest

Manufacturing Processes
Advanced Manufacturing Processes
Casting Forming and Welding
Reverse Engineering and Rapid Prototyping
Additive Manufacturing
Design for Additive Manufacturing

Courses

BITS F111 - Thermodynamics
ME G536 - Thermal Equipment Design
ME F220- Heat Transfer
ME G533 - Conduction and Radiation
ME F217 - Applied Thermodynamics
ME F461 - Refrigeration and Air-conditioning

Teaching

Teaching Courses:

First-year foundation courses: General Chemistry, Thermodynamics, Chemistry Laboratory, Chemistry I & II (curriculum: prior to 2011), Structure and Properties of Materials (curriculum: prior to 2011), Measurement Techniques (curriculum: prior to 2011), Chemistry Project Laboratory (curriculum: prior to 2011).
CD courses: Physical Chemistry I & II
Research-oriented courses: First degree Thesis/Special Project/Study projects/Computational projects/Reading Course on recent research topics from materials science.
Ph.D Course/Elective: Solid State Chemistry.
WILP Course: Physical and Inorganic chemistry as foundation course for B.Sc. Pharmaceutical sciences.
Teaching Interests:
Basic Sciences: Chemistry (Physical, Inorganic, Organic), Materials Science, Thermodynamics.
At an advanced level: Solid State Chemistry, Physical Chemistry of Nanomaterials, Composites, Thin film processing and Characterization, First-principle computational methods.

Courses

Decision Making (Game Theory)
Principles of Management

Courses

2020 - 2021

Second semester

1. MF F220 - Metrology and Quality Assurance (core course) - TA (Mr. A. Owhal)

2. ME F472 - Precision Engineering (elective)

Summer term

1. ME F472 - Precision Engineering

2021 - 2022

First semester

1. ME F414 - Fuel Cell Science and Technology (elective) - TA (Mr. V. S. Krishna)

2. ME F443 - Quality Control, Assurance and Reliability (core course for higher degree)

Second semester

1. MF F220 - Metrology and Quality Assurance (core course) - TA (Mr. S. Kugunavar)

2. ME F472 - Precision Engineering (elective)

2022 - 2023

First semester

1. ME F414 - Fuel Cell Science and Technology (elective)

2. MF F316 - Machining and Machine Tools (core course) - TA (Mr. M. Nair, Ms. S. Sahoo, Mr. A. Bhadouria)

Second semester

1. ME F112 - Workshop Practice (common course for 1st year undergrad)

2. MF F220 - Metrology and Quality Assurance (core course) - TA (Mr. S. Kugunavar & Mr. D. Talan)

Courses

Broad Areas of Teaching Interests

Human Resource Management
Organizational Behavior
Research Methods in Social Sciences
HR Analytics
General Management

Teaching Engagements at BITS Pilani

Managing People and Organizations- MPBA G504
Leadership and Managing change- MBA ZG514/QM ZG514/ MM ZG514
Organization Behavior - MBA G 511
Organization Change and Development - MBA G553
Managerial Skills - MBA G533
Negotiation Skills & Techniques - MBA G506
Performance Management - MBA G556
Principles of Management - MGTS F211

Courses

II Semester 2019-2020:

ME/MF F244 Kinematics and Dynamics of Machines
DE ZG 514 Fracture Mechanics (WILP)

I Semester 2020-2021:

MF F217 Machine Drawing (IC)
ME/MF F212 Mechanics of Solids (Tutorial)
ME F312 Advanced Mechanics of Solids (Tutorial)
BITS F111 Thermodynamics (Tutorial)

Courses

Corporate Finance
Financial Statement Analysis and Reporting
Financial Modelling and Valuation
Investment Banking and Financial Services
Essentials of Financial Management

Courses

First Semester 2013 - 14

OPTIMIZATION (AAOC C222/BITS F212)
DERIVATIVES & RISK MGMT (FIN F311 )

Second Semester 2013 - 14

INTRODUCTION TO FINANCIAL MATHEMATICS (FIN F242)
FINANCIAL ENGINEERING (ECON F413/EA C475/ MBA C475)

First Semester 2014 - 15

FINANCIAL ENGINEERING (ECON F413/EA C475/ MBA C475)
RISK MANAGMENT & INSURANCE (MBAC 432/FIN C413)
QUANTITATIVE METHODS (MBA C413)

Second Semester 2014 - 15

FINANCIAL ENGINEERING (ECON F413/EA C475/ MBA C475)

First Semester 2015 - 16

QUANTITATIVE METHODS (MBA C413)
FINANCIAL ENGINEERING (ECON F413/EA C475/ MBA C475)
QUANTITATIVE METHODS (MBA ZC417) (WILP)

Second Semester 2015 - 16

CORPORATE FINANCE AND TAXATION (MBA C416)
FINANCIAL ENGINEERING (ECON F413/EA C475/ MBA C475)
QUANTITATIVE METHODS (HHSM ZG515) (WILP)

First Semester 2016 - 17

QUANTITATIVE METHODS (MBA G513)
FINANCIAL ENGINEERING (MBA G575)

Second Semester 2016 - 17

FINANCIAL ENGINEERING (MBA G575)
QUANTITATIVE METHODS (MBA ZC417) (WILP)

First Semester 2017 - 18

Marketing Models (BAZC421)
QUANTITATIVE METHODS (MBA ZC417) (WILP)

Second Semester 2017 - 18

FINANCIAL ENGINEERING (MBA G575)
MARKETING MODELS (MBA G538)

First Semester 2018-2019

QUANTITATIVE METHODS (MBA G513)
Marketing Models (MBA G538)

Second Semester 2018-2019

FINANCIAL ENGINEERING (MBA G575)
PROJECT MANAGEMENT (MBA G523)

First Semester 2019-2020

QUANTITATIVE METHODS (MBA G513)
Marketing Models (MBA G538)

Second Semester 2019-2020

FINANCIAL ENGINEERING (MBA G575)
GAME THEORY AND BUSIN STRATEGY (MBA G578)

First Semester 2020-2021

BUSINESS STATISTICS (MBA G546)
Marketing Models (MBA G538)

Second Semester 2020-2021

BUSINESS ANALYTICS (MBA G561)
FINANCIAL ENGINEERING (MBA G575)

First Semester 2021-2022

STATISTICS & BASIC ECONOMETRIC (MPBA G505)

Second Semester 2021-2022

TIME SERIES ANALYSIS & FORECAS TING (MPBA G512)

First Semester 2022-2023

PRESCRIPT ANALY WITH MATH PROGRAMMING (MPBA G515)
FINANCIAL DERIVATIVES & ANALYSIS (MPBA G531)

Second Semester 2022-2023

TIME SERIES ANALYSIS & FORECAS TING (MPBA G512)

Courses

Thermodynamics
Applied Thermodynamics
Refrigeration and Air-conditioning
Internal Combustion Engine
Advances in Internal Combustion Engine (WILP, Off-Campus)

Courses Taught

Higher Degree Courses

Plant Biotechnology Bio G643
Genetic Engineering Technique Bio F418

First Degree Courses

Plant Physiology Bio F312
General Biology Bio F111
Ecology & Environmental Sciences Bio F241
Integrated Biology Bio F214
Recombinant DNA Technology Bio C461
Biology Laboratory BioF110

Courses

R&D Management
Strategic Management and Business Policy
New Venture Creation
Introduction to IPR
Creating and Leading Entrepreneurial Organization
Principles of Management
Marketing
Management Information System

Courses

EEE F111 Electrical Sciences

ECE F311 Communication Systems

CS/ECE/EEE/INSTR F241 Microprocessor Programming & Interfacing

ECE F343 Communication Networks

ECE F344 Information Theory and Coding

ECE F314: Electromagnetic Fields and Microwave Engineering

EEE G592 Mobile and Personal Communication

EEE G581 RF & Microwave Engineering

EEE G612 Coding Theory & Practice

EEE G622 Advanced Digital Communication

EEE/ECE/F472 Satellite communication

EEE F474 Antenna Theory and Design

CS/ECE/EEE/EI F215 Digital Design Lab

CS/ECE/EEE/INSTR F241 Microprocessor Programming & Interfacing Lab

ECE F312 Electromagnetic Fields and Microwave Engineering Laboratory

ECE F311 Communication Systems Lab

EEE G592 Mobile and Personal Communication Lab

EEE G581 RF & Microwave Engineering Lab

EEE G612 Coding Theory & Practice Lab

EEE G622 Advanced Digital Communication Lab

Courses

Present On Campus Courses

MPBA G504 - Managing People and Organizations
MPBA Preparatory Course - Business Communication
MBA G543 - Leading Modern Organizations
MBA G517 - Business and Society
MBA G510 - Human Resource Management
MBA G556 - Performance Management

Previous Semesters

MBA G531 - Managerial Communication
MGTS F211 - Principles of Management
MBA G553 - Organization Change and Development
MBA G555 - International Human Resource Management
MBA G511 - Organizational Behavior

Off Campus- WILP

MBA G511 - Managing People and Organizations
HHSM ZC417 - Managerial Communication
CMZG629T - Dissertation
MMZC441 - Human Resource Management

Previous Semesters

MBA C412 - Human Resource Management
POMDPZC411 - Organizational Behavior
MBA C418 - Marketing
DOM ZC 212 - Business Communication
MMZC 411 - Human Resource Management
MM ZC411 / QMJ ZC411- Marketing

Courses

Marketing
Marketing Research and Metrics
Marketing Models
Product and Brand Management
Decision Making
Risk Management and Insurance
Strategic Management

Courses

Courses taught at Postgraduate level

Managerial Economics
International Business
Management Information System
Retail Management Systems
Product and Brand Management

Course taught at undergraduate level

Principles of Management
Principles of Economics
Business Communication
E-business
Global Business Technology & Knowledge Management

Courses

Microfluidics and its applications
Advanced heat transfer
Prime movers and Fluid machines
Transport phenomena in Manufacturing
Gas dynamics
Engineering measurements
Heat transfer
Computational Fluid Dynamics

Courses

Theory Courses:

Applied Thermodynamics (UG, On-Campus)
Thermodynamics (UG, On-Campus)
Refrigeration and Air-conditioning (UG, On-Campus)
Engines, Motors and Mobility (UG, On-Campus)
Energy Management (WILP, Off-Campus)
Mechanical Technology (WILP, Off-Campus)

Lab:

Thermal Sciences Lab
Prime Movers and Fluid Machinery Lab

Courses

Second Semester 2021-22:

Tutor for MATH F112 (Old and New Session): Mathematics-II

Tutor for MATH F113: Probability & Statistics

Summer Term 2021-22:

Instructor-Incharge of MATH F111 : Mathematics-I

First Semester 2022-23

Instructor for MATH F211: Mathematics-III
Tutor for MATH F111: Mathematics-I

Second Semester 2022-23

Instructor for MATH F244: Measure & Integration

Tutor for MATH F112: Mathematics-II

First Semester 2023-24

Instructor for MATH F211: Mathematics-III
Tutor for MATH F111: Mathematics-I

Second Semester 2023-24

Instructor for MATH F244: Measure & Integration

Instructor-Incharge of MATH F112: Mathematics-II

First Semester 2024-25

Instructor for MATH F211: Mathematics-III
Tutor for MATH F111: Mathematics-I

Courses

Currently teaching (First Semester 2024-25):
- MATH F215: Algebra-I
- MATH F213: Discrete Mathematics

Previously taught:
- MATH F215: Algebra-I
- MATH F231: Number Theory
- MATH F113: Probability & Statistics
- MATH F213: Discrete Mathematics
- MATH F112: Mathematics II
- MATH F111: Mathematics I
- MATH F441: Discrete Mathematical Structures

Courses Taught

B.Tech. (1st Year)

Course No: CHEM F110 & Course Title: Chemistry Laboratory

Course No: : CHEM F111 & Course Title: General Chemistry (Tutorial)

M.Sc.

Course No: CHEM F214 & Course Title: Inorganic Chemistry I

Course No: : CHEM F343 & Course Title: Inorganic Chemistry III

Course No: : CHEM F266 & Course Title: Study Project

Course No: : CHEM F366 & Course Title: Lab Project

Course No: : CHEM F376 & Course Title: Design Project

Ph.D.

Course No: BITS G529 & Course Title: Research Project I

Course No: BITS G539 & Course Title: Research Project II

Course No: CHEM G559 & Course Title: Bio-inorganic Chemistry

Course No: BITS G554 & Course Title: Physical Methods in Chemistry

Course No: BITS G513 & Course Title: Study in Advanced Topics

Reading Course

Course No: BITS F382 & Course Title: Energy, Environment and Sustainability

To be Updated Soon

Courses

Mathematics I (MATH F111)
Numerical Solutions to Ordinary Differential Equations (MATH F444)
Probability and Statistics (AAOC ZC111)
Stochastic Processes and their Applications (MATH F424)
Advanced Engineering Mathematics (DEZG535, AEZG535)
Mathematics III (MATH F211)
Probability and Statistics (MATH F113)

Courses

General Mathematics-I
Mathematics-I (Calculus)
Mathematics-II(Complex Analysis)
Mathematics-III (Differential Equations)
Elementary Real Analysis

Courses

Current Semester

Numerical Linear Algebra (MATH F425)
Probability and Statistics (MATH F113)

Courses Taught

Mathematics-I (MATH F111)
Mathematics-II (MATH F112)
Mathematics-III (MATH F211)
General Mathematics-I (BITS F113)
Numerical Analysis (MATH F313)
Probability and Statistics (MATH F113)
Partial Differential Equations (MATH F343)
Mathematical Methods (MATH F241)
Numerical Solutions to Ordinary Differential Equations (MATH F444)

Courses Taught

ESO 218: Computational Methods for Engineers (as Student Tutor at IIT Kanpur)
ESO 208: Numerical Methods for Engineers (as Student Tutor at IIT Kanpur)
CE331A: Geoinformatics (as TA at IIT Kanpur)
MATH F111 (MATH-I): Calculus
MATH F112 (MATH-II): Linear Algebra and Complex Analysis
MATH F113: Probability and Statistics
MATH F211 (MATH-III): Differential Equations
MATH F212: Optimization (summer term, 2021-22)
MATH F353: Statistical Inference and Applications
WILP BAZC413: Introduction to Statistical Methods

Courses (I-Semester 2024-25)

Elementary Real Analysis (MATH F422)
Mathematics-I (MATH F111)

Courses (Taught Earlier)

At BITS Pilani

Mathematics-I (MATH F111)
Mathematics-II (MATH F112)
Mathematics-III (MATH F211)
Elementary Real Analysis (MATH F214)
Numerical Analysis (AAOC C341)
Introduction to Functional Analysis (MATH F341)
Differential Geometry (MATH F342)
Partial Differential Equations (MATH F343)
Numerical Methodology for PDEs (MATH F422)
Numerical Solution of ODEs (MATH F444)
Discrete Structure for Computer Science (MATH ZC222) [Off Campus Course]
Calculus (MATH ZC233/ PE ZC233/ PEAB ZC233) [Off Campus Course]

At Other Universities

Logic in Computer Science
Numerical Analysis
Differential Geometry
Linear Algebra

Courses Taught

On-campus courses

1. MATHEMATICS I (MATH F111)

2. MATHEMATICS II (MATH F112)

3. PROBABILITY AND STATISTICS (MATH F113)

4. MATHEMATICS III (MATH C211)

5. OPTIMIZATION (AAOC C222) (MATH F212)

6. OPERATIONS RESEARCH (AAOC C312)

7. ADVANCE PROJECT (BITS G511)

8. READING COURSE (BITS G649)

9. RESEARCH PRACTICE (BITS G540)

10. NONLINEAR PROGRAMMING (MATH F471/MATH C471)

11. STUDY PROJECT (MATH F266)

12. FIRST DEGREE THESIS

13. APPLIED STOCHASTIC PROCESSES (MATH F424)

14. STATISTICAL INFERENCE AND APPLICATIONS (MATH F353)

Off-campus courses

1. PROBABILITY AND STATISTICS (AAOC ZC111)

2. LINEAR ALGEBRA AND OPTIMIZATION (MATH ZC234)(TWO TIMES)

3. MODELLING AND APPLICATIONS IN OPERATIONS RESEARCH (BA ZC412) (3 TIMES)

Experience

March 2023 – present Associate Professor Department of Mathematics, BITS Pilani, Pilani Campus, Rajasthan
Feb.2015 – Feb 2023 Associate Professor Department of Mathematics, BITS Pilani, Pilani Campus, Rajasthan
Nov. 2008 – Jan. 2015 Assistant Professor Department of Mathematics, BITS Pilani, Pilani Campus, Rajasthan
July 2004 – Oct 2008 Lecturer AIM & ACT, Banasthali University, Rajasthan
August 2003-June 2004 Visiting Faculty Institute of Engineering and Technology, Khandari Campus Dr. B.R. Ambedkar University Agra.

Courses

Mechanical Engineering
Course Code	Course Title
BITS F111	Thermodynamics
DE G514	Fracture Mechanics
ME C211	Applied Thermodynamics
ME F110/TA C112	Workshop Practice
ME F211/ES C221	Mechanics of Solids
ME F215	Mechanical Engineering Lab
ME F241/ME C312	Mechanical Engineering Design

Manufacturing Systems Engineering
Course Code	Course Title
MF F242	Manufacturing Management
ME F320/F344	Engineering Optimization
MF F418	Lean Manufacturing
MM ZG542	Just-in-Time Manufacturing (WILP)
QM ZG536	Design of Experiments (WILP)

Mathematics
Course Code	Course Title
AAOC C222	Optimization
AAOC C111	Probability and Statistics

Teaching Profile

BIO G 525 - Environmental Biotechnology & Waste Management

Course Description : Application of biotechnology to the management of environmental problems. Biotechnology for enhanced plant and animal production through biological insecticides, herbicides resistance, mineral cycling, conservation of genetic resources and biological nitrogen fixation. Use of biotechnological processes for pollution control, bioremediation of toxicants and treatment of domestic and industrial wastes. Ethical issues related with the release of genetically modified organism.

BIOF 216 - Water, Sanitation and Solid Waste Management

Course Description: Sanitation, Water and Solid Waste for Development course will consist of four modules Municipal Solid Waste Management in Developing Countries This module provides an overview of the municipal solid waste management situation in developing countries. Planning and Design of Sanitation Systems and Technologies This module deals with integrated sanitation planning, dealing with citywide planning as well as with planning for specific contexts such as informal settlements. Introduction to Household Water Treatment and Safe Storage In this module students will learn about the most important water treatment methods at household level, successful implementation strategies and about assessing the impact of HWTS.Introduction to Faecal sludge management This module deals with what faecal sludge is and introduces students to the engineering fundamentals and required information for the design and selection of technologies.

BIO F217 - Laboratory for Water, Sanitation and Solid Waste Management

Course Description: The basic science module is a 1-week on-site training which prepares the student for the capstone project. Student will learn or get a refresher training on how research works including practical skills on how to conduct capstone project. Apart from lab experiments which students will be conducting, they are also expected to do a capstone project. Capstone project follows a progression of modules: a) define topic; b) compile required reading, c) select site, d) write capstone proposal (2 pages), e) design field research and survey development, f) carry out field research, g) analyze data, h) write-up, i) submit project report (max. 15 pages).

SAN G511 – Sanitation Technology

Course Description: Inadequate sanitation is responsible for some 840,000 deaths, every year worldwide. For India alone, a recent study estimated that the total economic impact of inadequate sanitation amounts to Rs. 2.44 trillion (US$53.8 billion) a year —this was the equivalent of 6.4 percent of India’s GDP in 2006. This means per person across India an annual impact of Rs. 2,180 (US$48). Challenges arise from the wide range of options available and the differing environments and conditions to which each is suited. Experience shows that it is important to allow local involvement in the choice of solutions, but with a full grasp of the requirements of each option. In this course the full range of technological options will be discussed in detail.

SAN G515 – Emergency Sanitation and Leadership

Course Description: The Sanitation Emergency module has been developed in cooperation with major humanitarian organizations with the aim to enable participants to understand sanitation in a humanitarian context. It focuses on interdisciplinary humanitarian action including humanitarian principles and on how to work within the framework and coordination of humanitarian assistance. The stages of humanitarian aid, stakeholders in the international relief system, and their respective mandates will be discussed in this module, as well as the appropriate sanitation options. At the end of this module students will be able to plan, implement and monitor a sanitation response to an emergency situation. The Leadership module helps prepare professionals by teaching them how to productively influence their sector, workplace, and communities through an increased awareness of their personal leadership capabilities and the development of inter-personal communication skills. Through a series of practical and reflective group and individual exercises, as well as dedicated one-on-one coaching sessions, participants will gain an intimate understanding of the leaders they can be and develop their way forward to becoming future sanitation leaders.

Courses

At BITS Pilani Goa: (Instructor In Charge/Instructor)

Spring 2024 (2nd Semester 2023-2024)

MATH F112: MATH II (first year course, IC)
MATH F314: Introduction to Functional Analysis (IC: Elective Course)
MATH G521: Applied Functional Analysis (PhD Course, IC)

Fall 2023 (1st Semester 2023-2024)

MATH F214: Elementary Real Analysis (IC)

Spring 2023 (2nd Semester 2022-2023)

MATH F112 : Mathematics II (B.Tech Course)
MATH F341 : Introduction to Functional Analysis (IC: Elective Course)

Fall 2022 (1st Semester 2022-2023)

MATH F211 : Mathematics III (B.Tech Course)

Spring 2022 (2nd Semester 2021-2022)

MATH F112 : Mathematics II (B.Tech Course)
MATH F341 : Introduction to Functional Analysis (IC: Elective Course)

Fall 2021 (1st Semester 2021-2022)

MATH F354 : Complex Analysis (IC: Elective Course)
MATH F215 : Algebra I (Integrated First Degree Course)

Semester-Long Projects:

Spring 2023:

Similarity, Minimal Polynomial for Matrices and Orthogonal Decomposition of Vector Spaces, Study Oriented Project (Student: Anurag Saxena)

Spring 2022:

Jordan Canonical Form, Study Oriented Project (Student: Aman Suryavanshi)
Diagonalization of Matrices, Study Oriented Project (Student: Tanishq Joshi)

At IIT Bombay: (Teaching Assistant)

Spring 2020: Linear Algebra (MA-106) and Differential Equation (MA-108)
Fall 2019: Study Complex Analysis (MA-205) and Differential Equations II (MA-207)
Spring 2019: Linear Algebra (MA-106) and Differential Equation (MA-108)
Fall 2018: Study Complex Analysis (MA-205) and Differential Equations II (MA-207)

At IISc Bangalore: (Teaching Assistant)

Fall 2017: Functional Analysis (MA-223)
Spring 2017: Measure Theory (MA-222)
Spring 2016: Measure Theory (MA-222)
Fall 2015: Analysis and Linear Algebra I (UM-101)
Spring 2015: Analysis and Linear Algebra I (UM-102)
Fall 2014: Analysis and Linear Algebra I (UM-101)

Courses taught

Introduction to Topology (MATH F311)
Mathematics-I (MATH F111)

Courses

U.G. Courses:

ME F212: Fluid Mechanics (Lecture)
ME F485: Numerical Fluid Flow and Heat Transfer (Lecture)
ME F242: Internal Combustion Engines (Lecture)
ME F461: Refrigeration and Air Conditioning (Lecture)
MF F311: Mechatronics and Automation (Lecture)
ME F111 Thermodynamics (Tutorial)
ME F344: Engineering Optimization (Tutorial)
ME F343: Mechanical Vibrations (Tutorial)

P.G. Courses

ME G515: Computational Fluid Dynamics (Lecture)
MSE G511: Mechatronics (Lecture)

Labs:

ME F311: Heat Transfer Lab
ME F215: Mechanical Engineering Lab

WILP Courses:

DEZ G515: CFD

Courses

Undergraduate courses

Mechanics of Solids
Materials Science and Engineering
Computer Aided Design
Mechanical Engineering Lab

Tutorials

Thermodynamics
Advanced Mechanics of Solids
Engineering Optimization

Higher Degree (M.E) courses.

Theory of Elasticity and Plasticity
Fracture Mechanics
Computer Aided Analysis and Design
Advanced Engineering Mathematics
Materials Technology and Testing

Courses

2010-11

First Semester : 1) MATH C191 (Mathematics I), 2) AAOC C221 (Graphs and Networks), 3) MATH ZC161 (Engineering Mathematics I)

Second Semester : 1) AAOC C111 (Probability and Statistics), 2) MATH C352 (Differential Geoemtry)

2011-12 :

First Semester : 1) MATH F111 (Mathematics I), 2) AAOC C221 (Graphs and Networks)

Second Semester : 1) MATH F113 (Probability and Statistics), 2) MATH C352 (Differential Geometry),

3) AAOC ZC111 (Probability and Statistics)

2012-13 :

First Semester :1) MATH F111 (Mathematics I), 2) AAOC C221 (Graphs and Networks)

Second Semester : 1) MATH F113 (Probability and Statistics), 2) MATH C352 (Differential Geometry)

2013-14 :

First Semester : 1) MATH F111 (Mathematics I), 2) MATH ZC222 (Discrete Structure for Computer Science)

Second Semester : 1) MATH F113 (Probability and Statistics), 2) MATH F342 (Differential Geometry)

2014-15 :

First Semester : 1) MATH F111 (Mathematics I), 2) MATH F215 (Algebra I)

Second Semester: 1) MATH F113 (Probability and Statistics), 2) MATH F342 (Differential Geometry)

2015-16

First Semester : 1) MATH F111 (Mathematics I), 2) MATH F215 (Algebra I)

Second Semester : 1) MATH F113 (Probability and Statistics), 2) MATH F342 (Differential Geometry)

3) BITS G649 (Reading Course to Ph. D. student on Representation Theory of Groups)

2016-17

First Semester : 1) MATH F111 (Mathematics I), 2) MATH F211 (Mathematics III)

Second Semester : 1) MATH F113 (Probability and Statistics) 2) MATH F342 (Differential Geometry)

2017-18

First Semester : 1) MATH F111 (Mathematics I), 2) MATH F211 (Mathematics III)

Second Semester : 1) MATH F113 (Probability and Statistics) 2) MATH F342 (Differential Geometry)

2018-19

First Semester : 1) MATH F111 (Mathematics I), 2) MATH F211 (Mathematics III)

Second Semester : 1) MATH F113 (Probability and Statistics), 2) MATH F342 (Differential Geometry)

2019-20

First Semester : 1) MATH F111 (Mathematics I), 2) MATH F211 (Mathematics III)

Second Semester: 1) MATH F113 (Probability and Statistics), 2) MATH F342 (Differential Geometry)

2020-21

First Semester :1) MATH F111 (Mathematics I), 2) MATH F213 (Discrete Mathematics)

Second Semester : 1) MATH F113 (Probability and Statistics), 2) MATH F342 (Differential Geometry)

2021-22

First Semester :1) MATH F111 (Mathematics I), 2) MATH F213 (Discrete Mathematics)

Second Semester : 1) MATH F112 (Mathematics II), 2) MATH F113 (Probability and Statistics)

Current Courses

August 2024 to December 2024 - Main Currents of Modern History

Courses taught

Undergraduate

ME F344 Engineering Optimization
Operation Research (AAOC C312),
Optimization (AAOC C222)
Mechanics of Solids (ES GC221)
Measurements Techniques II (TA GC222)
Production and Processing (TOC C244)
Maintenance and Safety (MM ZC242)
Production Planning & Control (ET ZC362),
Production Techniques (ME GC342)
Quality Control assurance and Reliability (ME C443),
Tool and Fixture Design (MF F312)
Structure and Properties of Material (ES C242)
Workshop Practice (TA C112)

Graduate

Maintenance Engineering (MSE G512),
World-Class manufacturing (MSE G521)
Toyota Production System (ME G538),
Manufacturing Planning & Control (MSE G512)
Manufacturing Organization & Management (MM ZG511),
Manufacturing Strategy (MM ZG512),
Logistics Management (MM ZG532),
Product Design (MM ZG541),

Courses

Mathematics-I (Calculus, Thomas, Calculus 11th Edition)
Mathematics-II (Linear Algebra: An Applied First Course, Kolman and Hill & Complex Variables and Applications: Churchill and Brown)
Mathematics-III (G. F. Simmons, Differential Equations with Applications and Historical Notes)
Numerical Analysis (Applied Numerical Analysis by Curtis F. Gerald, Patrich O. Wheatley Addison - Wesley, Numerical Analysis, Burden and Faires, Thomson Learning)
Optimization
Mathematical Methods
General Mathematics III
Probability and Statistics
Engineering Mathematics I
Engineering Mathematics II

Experience

Designation	Institution Period	Period
Professor	Birla Institute of Technology and Sciences, Pilani	1st March 2023 onwards
Associate Professor	Birla Institute of Technology and Sciences, Pilani	1st July 2018-28th February 2023
Assistant Professor	Birla Institute of Technology and Sciences, Pilani	23rd Dec. 2006 -30th June 2018

Current Semester

Supply Chain Management	On-campus
Operations management	On-campus

Previous Semesters

Machine tool engineering	(On-Campus)
Supply chain management	(On-Campus)
Sustainable manufacturing	(Off-Campus)
Mechanics of solids	(On-Campus)
Manufacturing processes	(On-campus)

TEACHING

ECON F211: Principles of Economics
ECON F244: Economic Growth and Development
ECON F313: Issues in Economic Development
ECON F214: Economic Environment of Business
MBAZC 416: Managerial Economics

Additionally, I undertake a few courses such as Advance Topics in Economic Development, Applied Econometrics, Applied Spatial Econometrics, Research Practice, and Development & Use of Computer Software for Ph.D. students.

Courses

Courses Taught

Undergraduate

Mechanics of Solids
Quality Control assurance & Reliabilty
Thermodynamics
Workshop Practice
Engineering Graphics
Measurement Techniques
Application of biomedical instrumentation in Health care
Kinematics and dynamics of Machines

Post Graduate

Fracture Mechanics
Material Testing & Technology
Theory of elasticity & Plasticity
Non-destructive testing techniques
Heat Transfer

Courses

To be updated.

Courses

Current Semester Courses

Courses Taught

2022-23

I Semester

World Class Manufacturing (MSE G521)
Lean Manufacturing (MM ZG537/MBA ZG537)
Manufacturing Management (ME F316) (Tutorial)

2021-22

I Semester

World Class Manufacturing (MSE G521)
Lean Manufacturing(MM ZG537/MBA ZG537)
Machine Tool Engineering (ME G532)

II Semester

Operations Management (MF F219)
Lean Manufacturing (MM ZG537/MBA ZG537)

Summer Term

Lean Manufacturing (MF F418)

2020-21

I Semester

World Class Manufacturing (MSE G521)
Production Planning and Control (ME F412)
Toyota Production System (ME G538)

II Semester

Lean Manufacturing (MF F418)
Operations Management (MF F219)

2019-20

I Semester

World Class Manufacturing (MSE G521)
Production Planning and Control (ME F412)

II Semester

Lean Manufacturing (MF F418)
Manufacturing Management (MF F242)

2018-19

I Semester

World Class Manufacturing (MSE G521)
Sustainable Manufacturing (MM ZG534) (Off-Campus Course)

II Semester

Manufacturing Management (MF F242)
Lean Manufacturing (MF F418)

2017-18

I Semester

World Class Manufacturing (MSE G521)
Sustainable Manufacturing (MM ZG534) (Off-Campus Course)

II Semester

Lean Manufacturing (MF F418)
Manufacturing Processes (MF F243)
Sustainable Manufacturing (MM ZG534) (Off-Campus Course)

2016-17

I Semester

World Class Manufacturing (MSE G521)
Machine Tool Engineering (ME G532)

II Semester

Design of Machine Tools (MF F341)
Lean Manufacturing (MF F418)

2015-16

I Semester

World Class Manufacturing (MSE G521)
Mechanical Engineering Lab (ME F215/MF F215)
Sustainable Manufacturing ( MM ZG534/MMVA ZG534) (Off-Campus Course)

II Semester

Design of Machine Tools (MF F341)
Lean Manufacturing (MF F418)

2014-15

I Semester

World Class Manufacturing (MSE G512)
Machine Tool Engineering (ME G532)
Machine Tool Engineering (DELT ZG532) (Off Campus Course)

II Semester

Design of Machine Tools (MF F341)
Lean Manufacturing (MF F418)
Lean Manufacturing (MBA ZG537) (Off-Campus Course)

2013-14

I Semester

Metal Forming and Machining (MF C314/MF F313)
World Class Manufacturing (MSE G521)
Quality Control Assurance and Relaibility (PEHC ZC331) (Off-Campus Course)

II Semester

Design of Machine Tools (MF F341)
Lean Manufacturing ( MF C418/MF F418)
Manufacturing Processes (PEVA ZC234) (Off-Campus Course)

2012-13

I Semester

World Class Manufacturing (MSE G521)
Mechanical Engineering Laboratory (ME F215/MF F215)
Quality Control Assurance and Relaibility (POWAB ZC312) (Off-Campus Course)

II Semester

Casting and Welding (MF C315)
Lean Manufacturing (MF C418)
Quality Control Assurance and Relaibility (PEHC ZC331) (Off-Campus Course)

2011-12

I Semester

World Class Manufacturing (MSE G521)
Metal Forming and Machining (MF C314)
JIT Manufacturing (MM ZG542) (Off-Campus Course)

II Semester

Machine Tool Engineering (ME G532)
Measurement Techniques-II (TA C222)
Quality Control Assurance and Relaibility (PEAB ZC331) (Off-Campus Course)

2010-11

I Semester

Engineering Materials (ENGG C232)
Workshop Practice (TA C112)
Transport Phenomena-II Lab (ME C331)
Engineering Materials (ENGG ZC232) (Off-Campus Course)

II Semester

Machine Tool Engineering (ME G532)
Measurement Techniques-II (TA C222)
Quality Control Assurance and Reliability (ET ZC432) (Off-Campus Course)

Courses Taught before 2010

On-Campus

World Class Manufacturing
Machine Tool Engineering
Workshop Practice
Engineering Materials
Measurement Techniques-II
Structure and Properties of Materials
Transport Phenomena-I
Production Techniques
Engineering Graphics
Mechatronics
Mechanism and Robotics

Off-Campus Courses

Quality Control Assurance and Reliability
Engineering Materials
JIT Manufacturing
Total Quality Management
Maintenance and Safety
Materials Management
Energy Management
Principles of Management
Project Management
Manufacturing Processes

Teaching Assignments

Summer Term 2023-24

BITS F232 Foundations of Data Structure and Algorithms (Lecture + Practical)

Second Semester 2023-24

BITS F232 Foundations of Data Structure and Algorithms (Practical)

CS F364 Design and Analysis of Algorithms (Lecture)

First Semester 2023-24

IS F311 Computer Graphics (Lecture)

CS F214 Logic in Computer Science (Tutorials)

Second Semester 2022-23

BITS F232 Foundations of Data Structure and Algorithms (Practical)

CS F364 Design and Analysis of Algorithms (Lecture + Tutorial)

BCS ZC230-L1 Linear Algebra and Optimization (Lecture)

First Semester 2022-23

IS F311 Computer Graphics (Lecture)

CS F214 Logic in Computer Science (Lecture + Tutorial)

Second Semester 2021-22

CS F364 Design and Analysis of Algorithms (Lecture)

First Semester 2021-22

CS F111 Computer Programming (Lecture)

CS F214 Logic in Computer Science (Tutorial)

CS G526 Advanced Algorithms and Complexity (Lecture + Practicals)

Second Semester 2020-21

CS F364 Design and Analysis of Algorithms (Lecture)

IS F311 Computer Graphics (Lecture)

First Semester 2021-22

CS F214 Logic in Computer Science (Tutorial)

CS F402 Computational Geometry (Lecture)

Courses

Courses for the I Semester 2024-2025 (Aug to Dec 2024) :

1. Mechanics, Oscillations & Waves (PHY F111)

2. Nonlinear Dynamics and Chaos (BITS F316)

3. Engineering Physics (BTEEEZC213)

For each course, visit the Course Management System (http://cms.bits-hyderabad.ac.in/bits-cms/) or the site:

https://sites.google.com/site/pkthiruvikraman/

Courses taught earlier:

Mechanics, Waves & Oscillations (Physics I)- PHY F111/PHY C131
Physics II PHY C132
Optics - PHY F213 / PHY C353
Modern Physics- PHY C221
Methods of Mathematical Physics- PHY C332
Statistical Mechanics- PHY C312 / F312
Digital Image Processing- EA C443/EEE F435/ BITS F311
Computational Physics- PHY F313
Thermodynamics- ES C112
General Physics- PHY C122
Measurement Techniques I (Physics Laboratory)- TA C211 / PHY F110
Structure and Properties of Materials- ES C242
Coding Theory & Practice- EEE G612
Nuclear Physics- PHY C341
Pattern Recognition - EA C471/BITS F446
Advanced Physics Lab - PHY F344
Electrical Sciences - EEE F111
Information Theory and Coding (ECE F344)
Electromagnetic theory-I (PHY F212)
General Physics (PHY F112 / PHY C122/ BCSZC240 (online)
Nonlinear Dynamics and Chaos (BITS F316)

To be Updated Soon

Courses

2nd Semester 2020-2021

PHA G546- Pharmaceutical Biostatistics
PHA G539- Principles Of Drug Discovery

1st Semester 2020-2021, 2021-2022

PHA F242- Biological Chemistry
PHA G619- Screening Methods and Techniques in Pharmacology

2nd Semester 2019-2020

BITS F467- Bioethics and Biosafety
PHA G546- Pharmaceutical Biostatistics

1st Semester 2019-2020

PHA F242- Biological Chemistry
PHA F341- Pharmacology-II

2nd Semester 2018-2019

BITS F467- Bioethics and Biosafety
PHA F213- Microbiology (Practical)

1st Semester 2018-2019

PHA G611- Advanced Pharmacology
PHA F242- Biological Chemistry (Practical)

Courses

Introduction to Molecular Biology and Immunology, 2nd year 2nd semester

Course handout

EG Video Lectures

Learning resources for EG

Lab assignment Problem sets A1-A3

Introduction to the course (Video)

Video on steps for setting AutoCAD 2014 for EG course

Demo videos for starting AutoCAD commands for Engineering Graphics (playlist)

video 1,	Starting up Initial settings Commands: Line, arc
video 2	commands: ctr arc (clockwise arc), circle, ellipse,polygon, point, pdmode, pd size, end, per, mid, int,node,
video 3	commands: Center, erase, trim, extend, undo, dtext, hatch, copy, move,
video 4	commands: rotate, mirror, array, change,
video 5 video 6	Commands: pline, pedit (fit spline, curve), offset, divide, measure, explode Dimension command and sub-commands

Learning material on orthographic projections(playlist)

video 1 video 2 video 3 video 4 video 5 video 6

Learning material on Isometric drawings

Studio recorded video lecture-Isometric 1

Studio recorded video lecture-Isometric 2

Isometric drawings without curvature (playlist)

video 1

video 2(quick and short step by step procedure without voice )

video 3

video 4

Isometric drawings with curvature (playlist)

Video 5a Video 5b (simple object with curvature)

video 6a video 6b (Complex object with curvature)

video 7 (quick and short step by step procedure without voice)

video 8 (quick and short step by step procedure without voice)

Learning material on Projections of lines

Problems demonstrating fundamental concepts of projections of lines (playlist)

Problems demonstrating concepts on traces of lines (playlist)

video 3

video 4

Trapezoid method for line in PP(or single projector) (playlist)

video 7

video 8

Learning material on Projections of Planes(playlist)

starting video video 1 video 2 video 3

Learning material on Projections of Solids (playlist)

Studio recorded video lecture-Demo of Solids

Studio recorded video lecture-Projections of Solids 1

Studio recorded video lecture-Projections of Solids 2

Studio recorded video lecture-Projections of Solids 3

(video 11)

Learning material on Sections of Solids (Playlist)

Studio recorded video lecture-Sections of Solids

Sections in a sphere (video 1)

Sections in a cone (video 2)

Identifying the location of section plane for a given true shape in a cone section (video 3)

Shape of water surface in tilted tumbler using concept on sections of solids

True shape given identification of section plane (sketching solution steps)

Learning material on Development of Solids (playlist )

Studio recorded video lecture-Development of the surfaces of Solids

Development of a cone(video 1)

URL

Courses Taught

Courses

Worked extensively for the development of more than 60 video lectures for the launch of Engineering Graphics course in flipped mode along with other team members to enhance student learning outcomes.
Developed Lab Manual for Production Techniques I
Developed Lab Manual for Prime Movers and Fluid Machines
Developed Solution Manual for Lab Exercises for Engineering Graphics
Regularly contribute to Work Integrated Learning Programs over and above regular on campus duties

Semester wise details of courses taught

Year	Semester I	Semester II
2023-24	BITS F111 Engineering Graphics(L T P) I/C ME F316 Manufacturing Management I/C	BITS F111 Engineering Graphics(L T P) I QM ZG536 Design of Experiments (L) WILP
2022-23	QM ZG528 Reliability Engineering (WILP)I/C ME F316 Manufacturing Management I/C	QM ZG528 Reliability Engineering (WILP)I/C BITS F111 Engineering Graphics(L T P) I/C
2021-22	ME F316 Manufacturing Management BITS F111 Engineering Graphics (T P integrated)	ME F443 Quality Control Assurance and Reliability (L I/C) BITS F111 Engineering Graphics (T P integrated)
2020-21	BITS F111 Engineering Graphics ( 3 hour lab with integrated tutorial) ME F443 Quality Control Assurance and Reliability (L I/C) QM ZG531 Statistical Quality Control (WILP)	QM ZG531 Statistical Quality Control (WILP) ME F344 Engineering Optimization (L T ) ME F243 Production Techniques-I (P)/ME F219 Manufacturing Processes (P)
2019-20	BITS F111 Engineering Graphics ( 3 hour lab with integrated tutorial) ME F443 Quality Control Assurance and Reliability (L I/C) MBA ZG531 Statistical Quality Control/ QM ZG531 Statistical Quality Control (WILP)	ME F344 Engineering Optimization (L T ) BITS F111 Engineering Graphics ( 3 hour lab with integrated tutorial)
2018-19	ME F412 Production Planning and Control (L I/C) BITS F111 Engineering Graphics (T) ME F243 Production Techniques-I (L T P I/C)	ME F344 Engineering Optimization MBA ZG531 Statistical Quality Control/ QM ZG531 Statistical Quality Control (WILP) BITS F111 Engineering Graphics (T P)
2017-18	BITS F111 Engineering Graphics (L T P) ME F443 Quality Control Assurance and Reliability (L I/C) BITS F366/BITS F367 Lab Project I/C	BITS F111 Engineering Graphics (T) ME F412 Production Planning and Control (L I/C) PEAB ZC414 Production Planning and Control (under WILP) BITS F366/BITS F367 Lab Project I/C
2016-2017	BITS F111 Engineering Graphics (L T P I/C) ME F243 Production Techniques-I (L T I/C)	BITS F111 Engineering Graphics (L T P I/C) ME F412 Production Planning and Control(L I/C)
2015-2016	BITS F111 Engineering Graphics (L T P I/C) ME F243 Production Techniques-I (L T P I/C)	BITS F111 Engineering Graphics (L T P I/C) ME F412 Production Planning and Control (L I/C) ME F313 Production Techniques II (Prac)
2014-2015	BITS F111 Engineering Graphics (T) ME F443 QCAR (L I/C) ME F243 Production Techniques-I (L T P I/C)	BITS F111 Engineering Graphics (L T P I/C) ME F332 Prime Movers and Fluid Machines (L P I/C)

Courses earlier taught at BITS

ME F243 Production Techniques I

POWTP ZC431 Maintenance and Safety

ET ZC412 Production Planning and Control

ME C412 Production Planning and Control

POWTP ZC481 Plant Layout and Design
POWTP ZC312 Quality Control, Assurance and Reliability
ME C332/ POWTP ZC311 Prime Movers and Fluid Machines
ES C112/BITS F111Thermodynamics

TA C112 Workshop Practice

BITS F111/TA C111 Engineering Graphics

TA C222 Measurement Techniques II

Courses taught

Undergraduate Courses

Separation Processes-II (CHE F313): Sem I 2017-18, 2018-19, 2020-21, 2021-22)
Materials Science & Engineering (CHE F243), I/C: Sem II 2017-18, 2018-19, 2020-21, 2021-22, 2022-23, 2023-24
Chemical Engineering Laboratory -I (CEL-I)
Chemical Engineering Laboratory -II (CEL-II)

Project courses

Study-oriented Project (SOP)
Design-oriented Project (DOP)
Laboratory-oriented Project (LOP)

Postgraduate courses

WILP Course: Solid Waste Management, EE ZG621/SSTM ZG526

Courses

Course 01
Course 02
Course 03

Courses Handled

Advanced Physical Pharmaceutics (PG Level)
Pharmaceutical Formulations and Biopharmaceutics (UG Level)
Industrial Pharmacy (UG Level)
Physical Pharmacy (UG Level)
Forensic Pharmacy (UG Level)
Advanced Physical Pharmaceutics for WILPD
Pharmaceutical Administration and Management for WILPD

Courses

Symbolic Logic
Introductory Philosophy
Research Methodology

Courses

Advanced Mechanics of Solids
Applied Thermodynamics
Mechanical Vibrations
Dynamics of Machines and Vibrations
Wind Energy
Tribology
Vehicle Dynamics
Mechanical Vibrations and Acoustics
Vibrations and Control
Thermodynamics
Dynamics and Vibrations

Courses

Teaching

First Degree / Undergraduate Courses (3 units) as Instructor-in-Charge

Main Currents of Modern History

Gandhian Thoughts

Modern Political Concepts

Main Trends in Indian History

Contemporary India

Doctoral Scholars (as instructor)

Study in Advanced Topics (5 units):

Readings in Intellectual History (2019-20 first semester)

Gender, Politics, History (2012-13 first semester)

Research Project I

Historiography and Historical Methods (2020-21 first semester)

Research Project II (6 units):

Gender, Sexuality, Identity (2013-14 first semester)

Research Practice (5 units):

Modernity: Texts in contexts (2017-18 first semester)

Toward a Study of Myths (2015-16 first semester)

Classical Rhetoric and Modern Political Communication (2014-15 first semester)

Cultural History (2013-14 second semester)

Advanced Projects:

Key Concepts and Texts in Modern Politics (2020-21 first semester)

Human Rights: Theory, Practice, Issues (2019-20 second semester)

Reading Course

Select Concepts and Texts in Modern Politics (2021-22 second)

Gender and Language (2021-22 first)

Courses

Advanced Drug Delivery Systems
Pharmacokinetics and Clinical Pharmacy
Pharm. Formulations and Biopharmaceutics
Advanced Pharmaceutical Technology
Dispensing Pharmacy

Courses

Courses Taught for On Campus Students

Design of Machine Elements (ME F314)
Product Design (DE G531)
Product Design & Development (MF F473)
Machine Design & Drawing (ME F241)
Theory of Elasticity and Plasticity (ME G641)
Fracture Mechanics (DE G514)
Advanced Mechanics of Solids (ME F312)
Finite Element Method (ME G512)
Engineering Graphics (BITS F110)
Workshop Practices (ME F110)
Mechanical Engineering Laboratory (ME F215)

Courses Taught for Work Integrated Learning (WILP) Program

Engineering Design
Product Design & Development
Concurrent Engineering
Just-in-Time Manufacturing
Quality Assurance and reliability

Digital Content Development for WILP Course

Engineering Design (ETZC 413)

Lab Development

Engineering Design (ETZC 413)
Product Design (DE G531)
Theory of Elasticity and Plasticity (ME G641)
Fracture Mechanics (DE G514)

Courses

Courses Taught

Phonetics & Spoken English,
Principles of Language Teaching,
Materials Production,
English Language Skills I & II,
Science Communication,
Science Writings,
Technical Communication,
Technical Report Writing,
Current Affairs,
Linguistics,
Language Lab Practice,
Applied Linguistics

Courses Currently Teaching

Current Affairs
Linguistics
Language Lab Practice

Courses Teaching

Real Time Systems - BITS G553

Lecture M - W - F (12:00 Noon to 12:50 P.M) in D-101

Data Storage Technologies and Networks - CS F446

Lecture T - Th - S (12:00 Noon to 12:50 P.M) in D-101

Courses Taught

Year & Semester	Course Title	Course Code
2019 - 2020, Semester I	Operating Systems	CS F372
2018 - 2019, Semester II	Real Time Systems	BITS G553 / CS F444
2018 - 2019, Semester II	Data Storage Technologies and Networks	CS F446
2018 - 2019, Semester I	Data Storage Technologies and Networks	CS F446
2017 - 2018, Semester II	Computer Programming	CS F111
2017 - 2018, Semester I	Computer Architecture	CS F342
2017 - 2018, Semester I	Distributed Data Systems	CS G554
2016 - 2017, Semester II	Advanced Computer Architecture	CS G524
2016 - 2017, Semester I	Computer Architecture	CS F342
2016 - 2017, Semester I	Advanced Operating Systems	CS G623
2015 - 2016, Semester II	Advanced Computer Architecture	CS G524
2015 - 2016, Semester II	Data Storage Technologies and Networks	CS F446
2015 - 2016, Semester I	Advanced Operating Systems	CS G623
2015 - 2016, Semester I	Computer Architecture	CS F342
2014 - 2015, Semester II	Advanced Computer Architecture	CS G524
2014 - 2015, Semester II	Data Storage Technologies and Networks	CS F446
2014 - 2015, Semester I	Advanced Operating Systems	CS G623
2014 - 2015, Semester I	Computer Architecture	CS F342
2013 - 2014, Semester II	Data Storage Technologies and Networks	CS C446 / IS C446 / CS F446
2013 - 2014, Semester II	Computer Programming	CS F111
2013 - 2014, Semester I	Software for Embedded Systems	CS G523
2013 - 2014, Semester I	Computer Architecture	CS F342
2012 - 2013, Semester II	Computer Organization	IS F241
2012 - 2013, Semester II	Software for Embedded Systems	CS G523 / SS G523
2012 - 2013, Semester I	Operating Systems	CS C372 / IS C362
2012 - 2013, Semester I	Software for Embedded Systems	CS G523 / SS G523
2012 - 2013, SUMMER	Systems Programming	WILP
2011 - 2012, Semester II	Advanced Computer Organization	CS C342
2011 - 2012, Semester II	Data Storage Technologies and Networks	CS C446 / IS C446
2011 - 2012, Semester I	Operating Systems	CS C372 / IS C362
2011 - 2012, Semester I	Data Storage Technologies and Networks	CS C446 / IS C446
2010 - 2011, Semester II	Operating Systems - WILP	IS ZC362
2010 - 2011, Semester II	Computer Programming - I	TA C162
2010 - 2011, Semester I	Operating Systems	CS C372 / IS C362
2010 - 2011, Semester I	Operating Systems - WILP	IS ZC362
2010 - 2011, Semester I	Computer Organization and Architecture	IS C351
2009 - 2010, Semester II	Advanced Computer Organization	CS C342
2009 - 2010, Semester II	Computer Programming - I	TA C162
2009 - 2010, Semester I	Real - Time Systems	BITS G553
2009 - 2010, Semester I	Computer Programming - II	TA C252
2008 - 2009, Semester II	Advanced Computer Organization	CS C342
2008 - 2009, Semester II	Advanced Architecture and Performance Evaluation	CS G562
2008 - 2009, Semester I	Operating Systems	CS C372
2008 - 2009, Semester I	Computer Programming - II	TA C252
2007 - 2008, Semester II	Advanced Computer Organization	CS C342
2007 - 2008, Semester II	Parallel Computing	CS C422 / IS C422
2007 - 2008, Semester I	Operating Systems	CS C372
2007 - 2008, Semester I	Computer Programming - II	TA C252
2006 - 2007, Semester II	Operating Systems	IS C362
2006 - 2007, Semester II	Computer Programming - I	TA C162
2006 - 2007, Semester I	Operating Systems	CS C372
2006 - 2007, Semester I	Computer Programming - II	TA C252
2005 - 2006, Semester II	Operating Systems	IS C362
2005 - 2006, Semester II	Computer Programming - I	TA C162
2005 - 2006, Semester I	Operating Systems	CS C372
2005 - 2006, Semester I	Real - time Systems	BITS G553
2004 - 2005, Semester II	Software for Embedded Systems - WILP	IS ZC424
2004 - 2005, Semester II	Software for Embedded Systems	CS C424 / IS C424
2004 - 2005, Semester I	Operating Systems	CS C372
2004 - 2005, Semester I	Operating Systems - WILP	IS ZC362
2003 - 2004, Semester II	Operating Systems	IS C362
2003 - 2004, Semester II	Computer Programming - I	TA C162
2003 - 2004, Semester I	Data Structure & Algorithms Lab	CS C342L
2003 - 2004, Semester I	Operating Systems	CS C372

Courses

Molecular Pharmacology	M.Pharmacy
Advance Pharmacology	M. Pharmacy
Immunopharmacology	M. Pharmacy
Pharmacology I	B.Pharmacy
Pharmacology II	B. Pharmacy
Pathophysiology	B. Pharmacy
BITS BIOCON certificate program in Quality control Microbiology	WILP program
Human anatomy and physiology	WILP program

Courses

Physics I - UG

Physics II- UG

Mechanics, Oscillations & Waves-UG PDF for 1&2 Ch

Classical Mechanics- PG

Quantum Mechanics I- PG

Optical Physics & Applications- PG

IC Fabrication Technology- PG

Introduction to Nano-sciences- EL

Modern Physics Lab- PG

Teaching

Courses Taught

Mechanics, Oscillations and Waves (an undergraduate compulsory multisection course)
Electromagnetic Theory (an undergraduate compulsory multisection course)
Modern Physics (an undergraduate elective course)
Measurement Techniques I (an undergraduate compulsory multisection laboratory course)
Nuclear Physics (an elective course for M. Sc. Physics students)
Solid State Physics (a compulsory course for M. Sc. Physics students)
Structure and Properties of Materials (an undergraduate compulsory course)
Thermodynamics (an undergraduate compulsory course)
Theory of Relativity (an elective course for all students)
Particle Physics (an elective course for M. Sc. Physics students)
Physics Laboratory (an undergraduate compulsory multisection laboratory course)
Nuclear and Particle Physics (a compulsory course for M. Sc. Physics students)
Advanced Physics Laboratory (compulsory for MSc students)
Electricity, Magnetism and Optics Laboratory (compulsory for MSc students)
Introduction to Quantum Field Theory (an advanced elective for MSc students)

Courses Taught

1. Electromagnetism I

2. Electromagnetism II

3. Mathematics I (Vector Calculus)

4. Mathematics II (Differential Equation)

5. Mathematics III (Complex Analysis)

6. Particle Physics

7. Mechanics

8. Introduction to Quantum Field Theory

9. Introduction to Cosmology

10. Introduction to Astronomy and Astrophysics

11. Mathematical Methods for Physics

12. Classical Mechanics

13. Advance Math Methods for Physics

14. Group Theory

15. Theory of Relativity

16. Statistical Mechanics

Courses Taught

Semester II (2023-2024)

Thermodynamics (BITS F111)
Physics Laboratory (PHY F110)

Semester I (2023-2024)

Optics (PHY F213)
Physics Laboratory (PHY F110)

Semester II (2022-2023)

Solid State Physics (PHY F341)
Condensed Matter Physics (PHY G515)
Physics of Semiconductor Devices (PHY G541)
Modern Experimental Methods I (SKILL G641)

Semester I (2022-2023)

Physics of Semiconductor Devices (PHY F426)
Physics Laboratory (PHY F110)

Semester II (2021-2022)

Solid State Physics (PHY F341)
Condensed Matter Physics (PHY G515)

Semester I (2021-2022)

Physics of Semiconductor Devices (PHY F426)
Physics Laboratory (PHY F110)
Physics of Semiconductor Devices (PHY G541)
Modern Experimental Methods I (SKILL G641)

Semester II (2020-2021)

Solid State Physics (PHY F341)
Condensed Matter Physics (PHY G515)
Modern Physics Lab (PHY F244)

Semester I (2020-2021)

Physics of Semiconductor Devices (PHY F426)
Electricity, Magnetism and Optics Lab (PHY F214)

Semester II (2019-2020)

Mechanics, Oscillations and Waves (PHY F111)
Physics Laboratory (PHY F110)

Semester I (2019-2020)

Physics of Semiconductor Devices (PHY F426)
Electricity, Magnetism and Optics Lab (PHY F214)

Semester II (2018-2019)

Mechanics, Oscillations and Waves (PHY F111)
Physics Laboratory (PHY F110)

Semester I (2018-2019)

Physics of Semiconductor Devices (PHY F426, PHY G541)
Physics Laboratory (PHY F110)

Semester II (2017-2018)

Mechanics, Oscillations and Waves (PHY F111)
Advanced Physics Lab (PHY F344)

Semester I (2017-2018)

Physics of Semiconductor Devices (PHY F426)
Physics Laboratory (PHY F110)

Semester II (2016-2017)

Solid State Physics (PHY F341)
Advanced Physics Lab (PHY F344)

Semester I (2016-2017)

Optics (PHY F213)
Physics Lab 1 (PHY F110)

Semester II (2015-2016)

Solid State Physics (PHY F341)
Modern Physics Lab (PHY F244)

Semester I (2015-2016)

Optics (PHY F213)
Physics Lab 1 (PHY F110)

Semester II (2014-2015)

Solid State Physics (PHY F341)
Modern Physics Lab (PHY F244)

Semester I (2014-2015)

Optics (PHY F213)
Physics Lab 1 (PHY F110)

Semester II (2013-2014)

Thermodynamics (BITS F111)
Modern Physics lab (Physics Lab III) (PHY F244)

Semester I (2013-2014)

Mechanics, Oscillations and Waves (PHY F111)
Physics Lab I (PHY F110)

Semester II (2012-2013)

Thermodynamics (BITS F111)
Modern Physics lab (Physics Lab III) (PHY F244)

Semester I (2012-2013)

Physics Lab I (PHY F110)

Semester II (2011-2012)

Instrumental Methods of Analysis (Physics Lab IV) (PHY C391)
Physics Lab I (PHY F110)

Semester I (2011-2012)

Mechanics Oscillations and Waves (PHY F111)
Measurement Techniques 1 (TA C 211)

Semester II (2010-2011)

Physics II (Electricity and Magnetism) (PHY C132)
Instrumental Methods of Analysis (PHY C391)

Semester I (2010-2011)

Physics I (PHY C131)
Measurement Techniques I (TA C 211)

Semester II (2009-2010)

Physics II (Electricity and Magnetism) (PHY C132)
Instrumental Methods of Analysis (PHY C391)

Semester I (2009-2010)

Physics I (PHY C131)
Measurement Techniques I (TA C 211)

Study Oriented Projects (SOP)

A brief review on the origin of ferromagnetism and the preparation and properties of Mn/Ni doped ZnO
Study on the preparation and properties of magnetically doped SnO₂ nanoparticles
Review on evaporated Cu₂ZnSnS₄ thin films for solar cell applications
Recent research on photovoltaic cells
Studies on the properties of doped & undoped NiO
Studies on Resistive Switching Memory Devices

Lab Oriented Projects (LOP)

Preparation and characterization of thin film CZTS sample using spray pyrolysis

2. Structural and optical analysis of standard titanium dioxide sample

3. TiO₂ nanoparticle, synthesis and characterization

4. Preparation methods of zinc oxide

5. Photocatalysis under UV and preparation methods of zinc oxide

6. Setting up of a gas sensing facility and testing with semiconductor structures

7. Study on CZTS solar cell absorbers

8. Nanoscale metal oxides for gas sensing

9. Metal oxide nanostructures and devices

10. Exploring multifunctional metal oxides

11. Optoelectronic Properties of Zinc Oxide Nanostructures

12. Cu doped ZnO nanoparticles

13. Deposition and studies on some metal oxide and metal sulfide thin films

14. Metal oxide nanostructures for optoelectronic applications

15. Preparation & Studies on Metal Sulphide Thin Films

16. Designing NiO nanoparticles for sprintronic applications (Design Oriented Project, DOP)

17. Fabrication of MoS₂ Thin Films

18. In₂S₃ Nanostructures-Optoelectronic applications

19. Preparation & Studies on Metal Sulphide Thin Films (DOP)

20. Transport properties of In₂S₃ - MoS₂ hetero structures

Off- Campus thesis

Investigating the Impact of Spatial Variation of Solar Cell Parameters on its Efficiency Using Open-source Python Based Simulations
Following first production module for ITK sub detector of ATLAS for HL-LHC data taking

Courses Teaching/Taught:

MATH F343: Partial Differential Equations
MATH F111: Mathematics-I (Calculus)
MATH F112: Mathematics II (Linear Algebra and Complex Analysis)
MATH F211: Mathematics-III (Ordinary Differential Equations)
MATH F312: Ordinary Differential Equations
MATH F241: Mathematical Methods
MATH ZC233/PEZC 233: Calculus (WILP)

Courses

Process Engineering (First Degree)
Biopharmaceutics (First Degree)
Dosage Form Design (Higher Degree)
Cosmetic Science (First Degree)
Quality Assurance and Regulatory Affairs [WILP]
Pharmaceutical Process Development and Scale up (WILP)

Courses Taught/Teaching

Courses Currently Teaching:

Short Film and Video Production
Technical Report Writing

Courses Taught

Business Communication
Technical Report Writing both On Campus and Off Campus
Technical Communication
Introduction to Mass Communication
Cinematic Art
PAN-AFRICAN Communication Skills Course (GOI Project)
GRE Preparation Course
Communicative English
Communication Skills for Non-Teaching Faculty
Communication Skills courses for Executives of Hindustan Zinc Limited, Udaipur.
WILP-Work Integrated Learning Programmes Communication Skills Courses.
Coursework for PhD such as
- - Applied Linguistics
  - Media and Communication Studies
  - Cultural studies
  - Education, Corporate Communication, Science Communication, etc.
Courses on Social and Cultural outreach of Indian Cinema to the students of Hiroshima University under the collaborative Study India Programme
Various courses in the category of SOP/COP/LOP

Research Interest

Cardiovascular Pharmacology : ischemia-reperfusion, hypertension, cardiomyopathy,

Diabetic neuropathy, nephropathy,

Neuropharmacology: Brain stroke, pre and postconditioning against brain and heart ischemia reperfusion injury.

Gene Therapy, targeted brain delivery for glioma

Candidates with interest in Cardiovascular and neuropahrmacology and possessing NET, DST INSPIRE, ICMR fellowships are encouraged to apply for by sending email to Rajeev.taliyan@pilani.bits-pilani.ac.in

Women Scientist Scheme and PDF-fellow and can also encourage to apply

Ph.D Supervised:

Mr. Sorabh Sharma "Exploring the Link between Insulin Resistance and Neurodegenerative Disorders and its Possible Mechanism(s), Currently working in University of Victoria, British Columbia
Ms. Sruthi R, "Investigating the Molecular Mechanisms Involved in Neuroprotective Effect of Remote Limb Ischemic Post Conditioning against Cerebral Ischemic Reperfusion Injury and Associated Cognitive Deficits"
Currently working in School of Medicine, Washington University

Research Group:

S. No.	Name of scholar	Research Topic	Year	Role	Present Status
1	Sorabh Sharma	Exploring the Link between Insulin Resistance and Neurodegenerative Disorders and its Possible Mechanism(s)	-	Supervisor	Research Trainee and PDF, University of Victoria, Canada
2	R. Sruthi	Investigating the Molecular Mechanisms Involved in Neuroprotective Effect of Remote Limb Ischemic Post Conditioning against Cerebral Ischemic Reperfusion Injury and Associated Cognitive Deficits	-	Supervisor	Post-Doctoral fellow, Washington University
3	Sarathlal K C	Exploring the possible effects, mechanism of diet	2017	Supervisor	Thesis-Submitted
4	Violina Kakoty	Exploring the neuroprotective potential of autophagy	2017	Supervisor	Thesis-Submitted
5	Geetika wadhwa	Development and evaluation of a nanoparticulate co-delivery system for the management of	2017	Supervisor	Ph.D. on going
6	Rajesh Pardhan	Development and evaluation of drug loaded nano-formulation	2018	Supervisor	Ph.D. on going
7	Jayant Bhardwaj	Studying the epigenetic mechanism (s) link for modulation of immunity	2020	Supervisor	Ph.D. on going
8	Shobha Kumari	Studying the neuroprotective potential of epigenetic modulator alone and in combination with neuro/………	2020	Supervisor	Ph.D. on going
9	Rajiv Ranjan	Design and development of GaN FET for Non Invasive detection …..	2019	Co-Supervisor	Ph. D. on going
10	Puja Gautam	Study of alternative splicing (AS) in relation to gonadotropic releasing hormone (GnRH) gen,……	2021	Co-Supervisor	Ph. D. on going
11	Aastha Mittal	Development, Characterization, and Evaluation of Anticancer Drug Loaded	2017	Co-Supervisor	Ph. D. on going

Courses Taught

Applied Philosophy
Professional Ethics
Introductory Philosophy
Symbolic Logic
Selected Readings
Sankara’s Thoughts
Dynamics of Social Change
Contemporary India
Comparative Religion
Introduction to Conflict Management (A part of the course: Conflict Analysis)
Technical Communication (A part of the course: Ethical Communication)

Refresher Course

Refresher Course on “The Themes of Indian Metaphysics & Epistemology,” sponsored by Indian Council of Philosophical Research, New Delhi, organized by Department of Philosophy, Panjab University, Chandigarh, India during May 22nd – June 12th, 2000.

Courses

Anatomy physiology and Hygiene (PHA 321/214)
Pharmacology-1 (PHA F 311)
Advanced Pharmacology (PHA G 611)
Screening method and Technique in Pharmacology (PHA G 61)
Pathophysiology (PHA F 415)
Biopharmaceutics (PHA C414)
Industrial Pharmacy (PHA C 331)
Principle of Toxicology (PHA G 624)

Courses handled

B. Pharm- Pharmaceutical Organic Chemistry, Pharmaceutical In-organic Chemistry, Pharmaceutical Physical Chemistry, Biochemistry, Pharmaceutical Analysis and Instrumental Methods of Analysis
M. Pharm- Modern Pharmaceutical Analytical Techniques, Quality Control and Quality Assurance, Advanced Medicinal Chemistry, Computer Aided Drug Design and Retrosynthetic Analysis.

Courses handled

On Campus

B.Pharm

Pharmaceutical Formulation and Biopharmaceutics
Microbiology
Pharmacoeconomics
Pharmaceutical Analysis
Biological Chemistry
Biopharmaceutics and Pharmacokinetics
Industrial Pharmacy
Instrumental Methods of Analysis
Dispensing Pharmacy
Introduction to Process Engineering
Cosmetic Science
Pharmaceutical Management and Quality Control

M. Pharm

Pharmaceutical Biotechnology
Dosage Forms Design
Intellectual Property Rights & Pharmaceuticals

Off-Campus

Quality Assurance & Regulatory Affairs
Microbiology
Pharmacoeconomics

Teaching Interests

Proteins – Structure, Folding and Engineering
Enzymes and their Biotechnological Applications
Advanced Techniques in Biochemistry (discipline specific elective)
Basics of Biochemistry (open elective)
Practicals related to Proteins and Enzymes
Research Methodology (Ph.D course work)
Educational Tours (organization and supervision)

Courses Taught/Teaching

Cross Cultural Skills
Technical communication
Effective public speaking
Technical Report Writing
Linguistics
English language teaching
Growth of English language
Technical report writing
Poetry I
Poetry II
Drama I
Drama II
English Language Skills
Applied Linguistics

Teaching

Second Semester (2022-2023):

EEE F431 Mobile Telecom Networks (L)
EEE F416 Digital Communication (L)

First Semester (2022-2023):

EEE G612 Coding Theory and Practice (L+P)
EEE/INSTR F212 Electromagnetic Theory (T)
EEE F311 Communication Systems (T)

Second Semester (2021-2022):

EEE F431 Mobile Telecom Networks (L)
EEE/INSTR F341 Analog Electronics (T)

First Semester (2021-2022):

EEE/INSTR F212 Electromagnetic Theory (T)
EEE F311 Communication Systems (T)
EEE F111 Electrical Sciences (T)
AEL ZG513 Automotive Communication Systems (L)

Summer Semester (2021):

EEE F311 Communication Systems (L)
BITS F221 Practice School - 1

Second Semester (2020-2021):

EEE/INSTR F341 Analog Electronics (T)
EEE/INSTR F244 Microelectronic Circuits (T)
EEE F111 Electrical Sciences (L+T)

Courses

UG Courses

EEE_F111 - Electrical Sciences
EEE_F214 - Electronic Devices
EEE_F477 - Modeling of Field Effect Nano Devices
EEE_F241 - Microprocessor Programming & Interfacing
- Digital Design
- Microprocessor
- Analog Electronics
EEE_F313 - Analog and Digital VLSI Design
- Microelectronic Circuits

PG Courses

- IC Fabrication
- Microprocessor & Digital Design

Courses

Previous Semesters

Digital Electronics and Computer Organization/ Digital Design
Electrical Sciences
Computer Architecture
Microprocessor Programming and Interfacing
Operating Systems
Real-Time Systems
Digital Design

Current Semester

Microprocessor Programming and Interfacing

Courses

BITS Pilani

Lecture

General Physics (PHY F112)
Electromagnetic Theory I (PHY F212)
Biophysics (BIO F215)

Tutorial

Mech Oscillations & Wave (PHY F111)
Mathematics II (MATH F112)
Thermodynamics (BITS F111)

University of Florida

Physics I (Mechanics) and Physics II (Electricity and Magnetism) Labs
Physics II (Electricity and Magnetism) Tutorial

Courses

First Semester

Electrical Sciences
Electrical Machine
Electromagnetic Theory
Digital Design

Second Semester

Power Electronics
Microprocessor and its interfacing
Control systems

WILP Courses

Power Electronics
Control & Instrumentation for systems

Courses in Current Semester

Electromagnetic Theory 1 (PHY F212)
Electromagnetism and Optics Laboratory (PHY F214)

Other courses taught

Solid State Physics (PHY F343)
Physics of Advanced Materials (PHY F414)
Experimental Methods of Physics ( PHY F417)
Mechanics, Oscillations and Waves (MEOW)
Electrical Sciences (EEE F111)
Thermodynamics (BITS F111)
Advanced Physics Laboratory (PHY F344)
Physics Laboratory

Courses

Semester-I, 2022-23 (BITS Pilani)
- Communication Systems, CDC Course, Class-In-Charge
- Communication Systems-Tutorial
- Electrical Sciences-Tutorial
Semester-II, 2021-22 (BITS Pilani)
- Advanced Digital Communications, CDC Course, Class-In-Charge
- Signals and Systems-Tutorial
- Electrical Sciences-Tutorial
Semester-I, 2021-22 (BITS Pilani)
- Communication Systems, CDC Course, Class-In-Charge
- Communication Systems-Tutorial
- Electrical Sciences-Tutorial
Semester-II, 2020-21 (BITS Pilani)
- Mobile Telecommunication Networks, Class-In-Charge
- Digital Signal Processing-WILP
Semester-I, 2020-21 (BITS Pilani)
- Communication Systems, CDC Course, Class-In-Charge
- Electromagnetic Theory-Tutorial
- Communication Systems-Tutorial
Semester-II, 2019-20 (BITS Pilani)
- Mobile Telecommunication Networks, Class-In-Charge
- Signals and Systems-Tutorial

Semester-I, 2019-20 (BITS Pilani)
- Communication Systems, CDC Course, Class-In-Charge
- Electromagnetic Theory-Tutorial
- Communication Systems-Tutorial
Semester-I, 2019-20 (BITS Pilani)
- Communication Systems, CDC Course, Class-In-Charge
- Electromagnetic Theory-Tutorial
- Communication Systems-Tutorial
Semester-II, 2018-19 (BITS Pilani)
- Digital Signal Processing, Class-In-Charge
- Mobile and Personal Communications, Co-Instructor
- Signals and Systems-Tutorial
Semester-I, 2018-19 (BITS Pilani)
- Advanced Satellite Communications, Co-Instructor
- Electromagnetic Theory-Tutorial
- Communication Systems-Tutorial

Teaching

FDTS topics for the BITS' students (Semester I, 2022-23)

(1) Floquet Systems.

(2) Higher Harmonics Generation in Solid State systems.

(3) Quantum Information Scrambling

Reference: https://boulderschool.yale.edu/sites/default/files/files/qi_boulder.pdf

For the Interested Project Students:

Related to Quantum Information and Computing: Quantum Information Scrambling (SOP) [Reference: https://boulderschool.yale.edu/sites/default/files/files/qi_boulder.pdf]
Related to the Floquet Systems: Periodically Driven Systems with Multiple Frequencies (DP, Special Project) and other related topics (SOP)

Courses taught

Mechanics Oscillations and Waves
Quantum Information and Computation
Mathematical Methods in Physics
Electromagnetic Theory I
Electromagnetic Theory II
Mathematics III
Engineering Mathematics II (WILP Course)
Physics Lab
Electromagnetism and Optics Lab
Modern Physics Lab
Advanced Quantum Mechanics
Advanced Solid State Physics
Classical Mechanics (In Sem. I, 2022-23)

Courses

Teaching/Taught at BITS Pilani:

Neural Networks and Fuzzy Logic (Jointly)
Electrical Sciences (Tutorial)
Control Systems
Control Systems (Tutorial)
Modern Control Systems
Control Systems Lab.

Taught at Previous Institutes:

Stochastic & Robust Control (PG)
Nonlinear Control (PG)
Soft Computing (PG)
Control Systems I (UG)
Control Systems II (UG)
Circuit Theory (UG)

Courses

Courses in Current Semester

I am teaching the following courses this semester [ First semester 2022-23]

Statistical Mechanics (PHY F312)
Introduction to Astronomy and Astrophysics (PHY F215)

Some of the other courses that I have taught are

Quantum Mechanics 1 (PHY F311)
Quantum Mechanics 2 (PHY C421)
General Theory of Relativity and Cosmology (PHYF415)
Thermodynamics (BITS F111)
Mathematical Methods for Physics (PHY F243)
Non-linear dynamics and chaos (BITS F316)
Astrophysics (PHY C471)
Theory of Relativity (PHY F315)
Statistical Mechanics (PHY F312)
Mechanics Oscillations and waves (PHY F111)

Courses

Courses Taught/ Teaching

B.E courses:

Microprocessor Programming and Interfacing
Internet of Things
Digital Design
Signals and Systems
Computer Networks
Srimad Bhagavad Gita

M.E courses:

Hardware Software Codesign
Software for Embedded systems
Networked Embedded Applications

Courses Teaching in Current Semester

Particle Physics (An Elective Course)
Thermodynamics (One Tutorial Section)

Courses

Electrical Sciences (EEE F111)-UG Level
Digital Design (EEE F2015) -UG Level
Electronic Devices (EEE F214) -UG Level
Analog Electronics (EEE F341) -UG Level
Microelectronics Circuits (EEE F244) -UG Level
Analog and Digital VLSI Design (EEE F313)-UG Level
Advanced VLSI Devices (EEE G594) -PG Level

Courses Taught in Previous Semesters

Nuclear & Particle Physics (CDC)
Mathematical Methods of Physics
Thermodynamics
Mechanics, Oscillations and Waves (MEOW)
Mathematics II
Electromagnetism II
Electromagnetism I
Particle Physics (Elective & CDC)
Engineering Mathematics (WILP Course)
Measurement Techniques (Currently called Physics Laboratory Course)
IC (Instructor-In-Charge) of Modern Physics Laboratory
IC (Instructor-In-charge) of Mechanics, Oscillations and Waves (MEOW)
IC (Instructor-In-Charge) of Physics Laboratory

Courses

Fiber Optics and Optoelectronics
Optical Communication (WILP)
Communication Systems
Telecommunication Switching Systems & Networks
Data Communications and Networks
Mobile Telecom Networks
Satellite Communications
Digital Communication
Advanced Digital Communications
Electromagnetic Theory
RF and Microwave Engineering
Signals and Systems
Electrical Sciences
Digital Electronics and Computer Organization

Experience

Associate Professor, EEE Dept., BITS, Pilani (Since June 2021)
Assistant Professor, EEE Dept., BITS, Pilani (August, 2013 - May, 2021)
Lecturer, EEE Dept., BITS, Pilani (June, 2007 - August, 2013)
Asst. Lecturer, EEE Dept., BITS, Pilani (June, 2006 - May, 2007)
Senior Lecturer, ECE Dept., KNMIET, Modinagar (April, 2005 - May, 2006)
Lecturer, ECE Dept., KNMIET, Modinagar (May, 2000 - April 2005)

Teaching (2024-25)

1. Combinatorial Mathematics (MATH F 421) with Prof. T. Singh:

Combinatorics is a fascinating but very broad subject. This makes it hard to classify. The blueprint of the course MATH F421 is the following: It starts with basic definitions and motivations by picking problems of perfect cover, Latin squares and magic squares/cube (SAIM algorithm). Then it will be covering advanced theory of permutations and combinations, counting principles, theory of partitions, special counting sequences, system of distinct representatives, combinatorial design and enumerations of graphs. For MATH F421, the Text Book: Richard A. Brualdi, Introductory Combinatorics, Pearson Education 5th Edition 2020.

Courses in Current Session (2022-2023)

MEL G621: VLSI Deisgn (Compulsory Discipline Course)
EEE/INSTR F313: Analog & Digital VLSI Design(Compulsory Discipline Course)
EEE/INSTR F214: Electronic Devices (Compulsory Discipline Course)
MEL G624: Advance VLSI Architecture (Elective)

Other Courses Taught @ BITS-Pilani

At Undergraduate Level:

EEE/INSTR F313: Analog & Digital VLSI Design
EEE/INSTR/CS F215: Digital Electronics
EEE/INSTR/CS F215: Microprocessor Programming & Interfacing
EEE/INSTR F244 : Microelectronics Circuit
EEE/INSTR F341: Analog Electronics
EEE/INSTR F214: Electronic Devices
EEE/INSTR F111: Electrical Science
EEE/INSTR F245 : Control Systems
EEE/INSTR F376/F377: Design Project
EEE/INSTR F266: Study Project
EEE F491: Special Project
EEE/INSTR F366/F367: Laboratory Project
BITS F423T/F421T/C441T: First Degree Thesis

At Postgraduate Level:

MEL G621: VLSI Deisgn
MEL G642: VLSI Architecture
EEE G625: Advanced Analog & Mixed Signal Design
BITS G629: Higher Degree Dissertation
BITS G540: Research Practice

Experience

Assistant Professor, Department of EEE, BITS, Pilani (since December 2015)
Lecturer, Department of EEE, BITS, Pilani (June 2008- December 2015)
Assistant Lecturer, Department of EEE, BITS, Pilani (August 2006- May 2008)

courses

Courses taught (2007-till date):

Physics I (Mechanics, wave & oscillations)
Physics II (Electrostatics & Electromagnetics)
Optical Physics and Applications
Measurement Techniques I
Physics Laboratory I
Engineering Mathematics
Elec Magnet & Optics Lab
Instrumental Methods of Analysis
Modern Physics Lab
Methods of Experimental Physics
Sanskrit
Optics
Solid state Physics
Electrical Sciences
Advanced Physics Lab
Electromagnetic Theory 1
Thin Film Technology
Soft Condensed Matter Physics

First Semester 2023-2024:

THIN FILM TECHNOLOGY (PHY F379)
PHYSICS LABORATORY (PHY F110)

Lab/Study Oriented Project : 5 students

First degree Thesis : 1 student

Second Semester 2022-2023:

SOFT CONDENSED MATTER PHYSICS (PHY F416)
ADVANCED PHYSICS LABORATORY (PHY F344)

Lab/Study Oriented Project : 4 students

First degree Thesis : 1 student

First Semester 2022-2023:

THIN FILM TECHNOLOGY (PHY F379)
PHYSICS LABORATORY (PHY F110)

Lab/Study Oriented Project : 4 students

Second Semester 2021-22:

ADVANCED PHYSICS LAB (PHY F344): (Lecture + PRACTICAL)

MECHANICS ,OSCILLATIONS & WAVES (Tutorial )

First degree thesis: 1 student

Lab/Study Oriented Project : 5 students

First Semester 2021-2022:

ELECTROMAGNETIC THEORY 1 (PHY F212): (Lecture+Tutorial: Sec #1; Course IC )
MECHANICS ,OSCILLATIONS & WAVES (PHY F111): (Tutorial, Sec#3N)

First degree thesis: 1 student

Lab/Study Oriented Project : 2 students

Second Semester 2020-21:

ADVANCED PHYSICS LAB (PHY F344): (Lecture + PRACTICAL)
MECHANICS ,OSCILLATIONS & WAVES (Tutorial: T9 )

First degree thesis: 4 students

Lab/Study Oriented Project : 6 students

First Semester 2020-2021:

ELECTROMAGNETIC THEORY 1 (PHY F212): (Lecture+Tutorial: Sec #1 )
PHYSICS LABORATORY (PHY F110): (Instructor Incharge of the course, Sec#3)

First degree thesis: 2 students

Lab/Study Oriented Project : 6 students

Second Semester 2019-20:

ADVANCED PHYSICS LAB (PHY F344): (Lecture+PRACTICAL)
MECHANICS ,OSCILLATIONS & WAVES (Tutorial: 2 SECTIONS (7&10))

First degree thesis: 1 student

Lab/Study Oriented Project : 7 students

First Semester 2019-2020:

ELECTROMAGNETIC THEORY 1 (PHY F212): (Lecture+Tutorial: Sec #1; Course IC )
PHYSICS LABoratory (PHY F110) (SEC #12)

Lab Oriented Project : 2 students (2 projects)

Study Oriented Project : 1 student

second Semester 2018-19:

ADVANCED PHYSICS LAB (PHY F344): (Lecture+PRACTICAL)
ELECTRICAL SCIENCES (EEE F111) (Tutorial: 2 SECTIONS (2&10))

First degree thesis: 2 students

Study Oriented Project : 4 students

(First Semester 2018-19):

OPTICS (PHY F213): (Lecture+Tutorial)
ELECTRICAL SCIENCES (EEE F111) (Tutorial)

Lab Oriented Project : 4 students (2 projects)

Study Oriented Project : 1 student

Second Semester 2017-18

MECHANICS ,OSCILLATIONS & WAVES (2 TUTORIAL SECTIONS)
MODERN PHYSICS LAB (PHY F244)

Study Oriented Project : 2 students

Lab Oriented Project: 3 students

(First Semester 2017-18):

OPTICS (PHY F213): (Lecture+Tutorial)
ELECT. MAGN. & OPTICS LAB (PHY F214)

Study Oriented Project : 2 students

Second Semester 2016-17:

SOLID STATE PHYSICS (PHY F314)
MODERN PHYSICS Lab (PHY F244)
Study Oriented Project : 1 student
Lab Oreinted Project : 2 Students

(First Semester 2016-17):

Elect Magnet & Optics lab (PHY F214)
PHYSICS Lab1
MECHANICS ,OSCILLATIONS & WAVES (TUTORIAL SECTION 12)
Study Oriented Project : 1 student
Lab Oreinted Project : 2 Students

(Second Semester 2015-16):

SOLID STATE PHYSICS ( PHY F314)
MODERN PHYSICS Lab (PHY F244)

Lab Oreinted Project : 1 Student

First Semester 2015-16:

Elect Magnet & Optics lab (PHY F214):
MECHANICS,OSCILLATIONS & WAVES (TUTORIAL SECTIONS 4 & 8)
Study Oriented Project : 1 student
Lab Oreinted Project : 2 Students

(Second Semester 2014-15):

SOLID STATE PHYSICS ( PHY F314)
MODERN PHYSICS Lab (PHY F244)
List of Experiments
Lab Manuals and References

First Semester 2014-2015:

Elect Magnet & Optics lab

List of Experiments
Manuals for experiments

MECHANICS ,OSCILLATIONS & WAVES ( TUTORIAL)

Last semester (Second semester 2013-2014):

OPTICAL PHYSICS & APPLICATION (LECTURE+TUT)
MODERN PHYSICS LAB
MECHANICS ,OSCILLATIONS & WAVES ( TUTORIAL)
Lab oriented Projects: 2 students
Study Oriented Project: 1 student

First semester 2013-2014:

Elect Magnet & Optics lab

Second semester 2012-2013:

MODERN PHYSICS LAB
Study Oriented Project : 5 students
Lab Oreinted Project : 1 Student

First semester 2012-2013:

Optics
Elect Magnet & Optics lab

Teaching

Courses(UG Level)

1. Electrical Sciences

2. Electric Machine

3. Control Systems

4. Power Electronics

5. Power Systems

Graduate Level

1. Power Electronic Converters

2. Soft-Switching Converter technology

Off Campus Programme

1. Basic Electrical Engineering

2. Power Systems

3. Digital Electronics

Laboratory Development

1. Power Electronics (UG level)

2. Experiments on resonance converters (Graduate level)

Research Area

1. High gain DC-DC Converters

2. Maximum Power Point Trackers

3. Artificial intelligence with an introduction to Intellectual intelligence

4. Data clustering techniques

5. Micro-grid with future ready e-grid

6. Green Hydrogen generation

International Society membership

Member IEEE
Life Member IETE
Member International Solar Energy Society (ISES)

Visit abroad

University of Salerno, Italy, May-July 2015
Worked with Professor Nicola Femia on MOSFET Switching Waveform Analysis

Subjects Taught:

Economics of Growth and Development
Principles of Economics
Economic Environment of Business
Resources and Environmental Economics
Issues in Economic Development
Econometric Methods

Courses

Courses in the Current Semester (1 SEM 2023-24)

Mechanics, Oscillations & Waves (Lecture)
Mathematics III (Lecture & Tutorial)

Courses Taught (Lecture & Tutorial)

Electromagnetic Theory I
Electromagnetic Theory II
Solid-State Physics
Mathematical Physics
Quantum Mechanics I
Physics & Modeling of Microelectronic Devices
Nanoelectronics and Nanophotonics
Electrical Sciences I
Computational Physics

Courses Taught (Tutorials Only)

Electronic Devices & Integrated Circuits
Analog Electronics
Electromagnetic Waves Theory

Lab Courses

Physics Lab (1st Year)
Modern Physics Lab

Courses

Courses in Current Semester

Mechanics Oscillations and Waves
Beginning German

Courses Taught (last 9yrs.)

Physics I (Mechanics)
Physics II (Electromagnetic theory)
Structure & Properties of materials
Quantum Mechanics I
Atomic & Molecular Spectroscopy
Methods of Experimental Physics

Courses

Ist Semester - 2022-23

Electrical Sciences (EEE F111) - Lecture

Electrical Sciences (EEE F111) - Tutorial

Electric Machine (EEE/ INSTR F211) - Tutorial

Ist Semester - 2021-22

Electrical Sciences (EEE F111) - Lecture (IC)

Electric Machine (EEE/ INSTR F211) - Tutorial

IInd Semester - 2021-22

Electrical Sciences (EEE F111) - Lecture (IC)

Power Electronics (EEE/ INSTR F342) - Tutorial

Ist Semester - 2020-21

Electrical Sciences (EEE F111) - Lecture (IC)

Electric Machine (EEE/ INSTR F211) - Tutorial

IInd Semester - 2020-21

Electrical Sciences (EEE F111) - Lecture (IC)

Power Electronics (EEE/ INSTR F342) - Tutorial

Semester - 2017-2018

Ist

EEE/ INSTR F211 (Electric Machine)

EEE/ INSTR F212 (Electro Magnetic Theory)

POWJS ZC 316 (Power Electronics)

Previous Years

Post Graduate Courses (Taught)

EEE G542 : Power Electronics Converter
EEE G544 : Steady State and Dynamics of Electrical Machines

EEE G546 : Computer Simulation Laboratory

EEE G552 : Solid State Drives
EEE G553 : Utility Applications of Power Electronics System

Under Graduate Courses (Taught)

ES C 271 : Electrical Science-I

ES C 272 : Electrical Science-II

ES C 371 : Electrical Mechanical Energy Conversion (EMEC)

AAOC C321 :      Control System
ES C263        :     MicroProcessor Prog. and Interfacing
ES C111        :      Basic Electrical Technology

Courses For Collaborative Industries

Basic Electrical Technology

Power System -I

Power System-II

Digital Electronics

Electrical Machine

Power Electronics

Courses Taught

Current Semester:

During the current semester (II Sem 2022-23)

EEE F111 Electrical Science (I/c, L, T)

Handout, Notices of this course is access from NALANDA website.

EEE F242 Control System (T)

Earlier Semesters:

ME Courses:

EEE G612	Coding Theory & Practice	Instructor In-charge
BITS G554	Data Compression	Instructor In-charge
EEE G556	DSP based Electrical Drives	Instructor In-charge
EEE F414	Digital Signal Processing	Instructor In-charge

BE Courses:

INSTR F343	Industrial Instrumentation & Control	Instructor In-charge
EEE F435	Digital Image Processing	Instructor In-charge
INSTR C355	Electronic Instruments and Instrumentation Technology	Instructor In-charge
TA C111	Measurement Technique (MT-II)	Instructor In-charge
ES C241	Electrical Science I	Instructor In-charge
TOC C235	Electrical and Electronics Practice	Instructor In-charge
ENGG C111	Electrical & Electronics Technology	Instructor In-charge
EEE C364/ INSTR C364	Analog Electronics	Instructor In-charge
AAOC C32	Control System	Instructor
EEE C272	Circuits and Signals	Instructor (Tutorial)
EEE C414	Telecommunication Switching Systems and Networks	Instructor (Tutorial)
CS/EEE/INSTR C391	Digital Electronics and Computer organization	Instructor (Lab+Tutorial)
INSTR C381	Transducers and Measurement system	Instructor (Tutorial)
ES C252	Basic Electronics	Instructor
ES C231	Circuit Theory	Instructor

Telepresence Courses: BITS Hyderabad, Goa, Pilani Campus

EEE F414 Digital Signal Processing Instructor In-charge
EEE G612 Coding Theory & Practice Instructor In-charge

Courses for Collaborative Industries:

NTPC: Badarpur, Dadri, Singrauli, Korba, Ramagundam, Farraka, Vindhyachal, Rihand, Kahalgaon, Talchar, Unchahar, Simhadri, Tanda, Anta

Indo-Gulf, Jagdishpur

Engineering Measurement
Instrumentation and Control
Measurement Techniques
Instrumentation Systems

Academic Refresher Courses for Collaborative Industries: Hindustan Zinc, Bharat Aluminium Ltd

Basic Process Engineering

Courses Taught

Biology Laboratory (Bio F110)
General Biology (Bio F111)
Cell Biology (Bio F213)
Recombinant DNA Technology (Bio F311)
Molecular Biology of Cell (Bio F413)
Enzymology (Bio F421)
Molecular Immunology (BIO G514)
Animal Cell Technology (Bio G524)
Cancer Biology (BIO G526)
Advanced Cell and Molecular Biology (BIO G542)
Human Genetics (Bio G612)
Stem Cell Biology (Bio G515)
Experimental Techniques (Bio G642)

Teaching & Research Interest

Teaching:

General Chemistry-CHEM F111 (Tutorial)
Chemical Experimentation 1- CHEM F242 (Instructor)
Chem Lab - CHEM F110 (Instructor)
Environmental Chemistry-EEZ G511 - WILP (IC)
Advanced Organic Chemistry - CHEM G551 (Co- Instructor)

Research:

Molecular engineering of multi-porphyrin arrays and photosynthetic antenna type complexes for sustainable energy solutions such as photovoltaics.
Biomimetic chemistry.
CH-functionalization of the rigid scaffolds such as bicyclo[1.1.1]pentane (BCP), cubane, and adamantane for drug design and/or bioisosteric applications.

Teaching

BIO F111 General Biology
BIO F211 Biological Chemistry
BIO F215 Biophysics
BIO F244 Instrumental Methods of Analysis
BIO F417 Biomolecular Modeling
BIO F421 Enzymology

Courses

Semester-I (August but actually started from October, 2021-22)
GenChem Tutorial (F111) section T6N, 4th October 2021 to5th March 2022
Chemistry Laboratory (F110) 4th October 2021 to 28th Feb 2022
Semester-II (January-May, 2022)
Chemistry Experiments I, 15 January 15 2022 to May 28 2022
GenChem Tutorial (F111) two sections (T2N and T4N), January 2022 to April 2022
Semester-I (August-January, 2022-23)
GenChem Lecture (F111) two sections, October 2022 to February 2022)
Organic Chemistry and Drug Design (CHEM F335) IC
Semester-II (January-May, 2023)
Organic Chemistry 2 (CHEM_F243) IC
Chemistry Experiments I, 17 January 2023 to May 2023
Semester-I (August-January, 2023-24) (Upcoming)
Organi Chemistry 1 (CHEM F212)
GenChem Tutorial (F111) one section

Experience

Research and Teaching Experience:

March 2023 - Present: Professor, EEE Department, BITS, Pilani.
July 2018 - Feb 2023: Associate Professor, EEE Department, BITS, Pilani.
June 2016 – July 2016: Visiting Research Scholar, Robotics Lab, System Cybernetics, Graduate School of Engineering, Hiroshima University, Japan.
April 2008 - June 2018: Assistant Professor, EEE Department, BITS, Pilani.
July 2000 - March 2008: Lecturer, Instrumentation Group, BITS, Pilani.
July 1999 - June 2000: Assistant Lecturer, Instrumentation Group, BITS, Pilani

Industrial Experience:

May 1996 - June 1999: Assistant Manager, EMA India Limited, Kanpur

1994 - 1996:

Trainee Engineer, MESSUNG Systems Pvt Ltd, Pune
Senior Engineer, Sanchar Antenna and Communication Ltd., New Delhi
Senior Engineer, DEUTEK Controls (India) Ltd, New Delhi
Senior Engineer, LML Scooter Pvt Ltd, Kanpur

May 1996 - June 1999: Assistant Manager, EMA India Limited, Kanpur

1994 - 1996:

Trainee Engineer, MESSUNG Systems Pvt Ltd, Pune
Senior Engineer, Sanchar Antenna and Communication Ltd., New Delhi
Senior Engineer, DEUTEK Controls (India) Ltd, New Delhi
Senior Engineer, LML Scooter Pvt Ltd, Kanpur

1. EMA India Ltd., Kanpur

EMA INDIA LIMITED was founded and signed a joint venture agreement with M/s. EMA Electromaschinen Schultz GmbH & Co KG, Germany, to manufacture State of Art Induction Heating Equipments in the year 1971. With the pioneering efforts of introducing these equipments for the first time in India, today EMA INDIA LIMITED has achieved the distinction of being a market leader of this field. EMA is an ISO 9001-2000 certified company following TQM practices at par with International Standards.

EMA manufactures both Medium Frequency and High Frequency Equipments in power ratings from 1 Kw to 1130 Kw and frequencies ranging from 500 Hz to 450 KHz for every possible application. EMA can design and manufacture custom-built Machine for applications like Induction Hardening, Partial Heating, Annealing, Tempering, Softening, Brazing, Heating for Shrink Fitting and Billet Heating.

To keep pace with the latest technological trend, EMA has switched over from Motor Generators to Solid State Generators with Thyristors and the latest being IGBT Transistorised Convertors.

Commencing with the Conventional Relay Controls for the machine operations, EMA has established its supremacy by introducing PLC’s and CNC’s for the equipment controls with technological advancements.

On the export front, EMA has established itself as the pioneer in Export of Induction Heating and Hardening Equipments and Accessories to Germany, USA, Iran, Turkey, Brazil, Indonesia, UK, UAE.

Projects -- Customized Induction Hardening Machines for Automotive Industries

TELCO, Pimpari, Pune,
TELCO, Jamshedpur
Bajaj Auto, Pune
Bajaj Tractor, Pune
Motor Industries Co. Limited (MICO), Bosch Group, Adugodi, Bangalore
Usha Telehoist (UT), Hosur
Hidustan Motors Ltd, Tiruvollur
Kirloskar-Cummins, Kothrud, Pune
Tata-Cummins, Jamshedpur

2. MESSUNG Systems Pvt Ltd

Established in 1981, Messung pioneered the first indigenous PLC in India in competition with multinationals in an era with strict import restrictions and a closed market. Having received accolades for its pioneering efforts, Messung took advantage of the opening of the market in India in 1995, by becoming a distributor for Mitsubishi Electric FA products in India. Combining the experience and talent acquired in developing the indigenous PLC and HMI products, and the world-class FA products of Mitsubishi Electric.

Projects -- Machine Tool Industry Automation by PLCs and CNCs

KRE Automatic Vehicle Washing Machines, New Delhi
Eicher Tractors Ltd, Parwanoo
Renovate Machines, Ghaziabad
Sundeep Metallurgical Works Ltd, Parwanoo
Invel Transmission, Faridabad
Emco Press Master, Faridabad
Schenck Avery Ltd, Ballabgarh
R. R. Machines, Ghazibad
Shakti Hydrolics Limited, New Delhi
Indo Asia Fusegear Ltd, Sonepat

3. Deutek Controls (India) Ltd

Deutek is the authorized system house of m/s SIEMENS Ltd. for their Automation and Drive line of products. Deutek is involved in the design and installation of complete systems for monitoring and control of industrial plants and providing spares and services for the same. Deutek is system integrator for Siemens industrial automation and drive systems. The complete range of products broadly includes Programmable Logic Controllers (PLCs) ranging from micro-PLC S7-200, mni-PLC S7-1200, PLC S7-300 & S7-400 series, HMI systems, Supervisory Control and Data Acquisition (SCADA) systems, DCS systems (Siemens PCS7), AC & DC Drives etc.

Projects -- Process Automation by PLC, HMI and SCADA

Shamken Spinners, Kosi Kalan, Mathura
Draft-Air (I) Pvt Ltd, New Delhi
Brindavan Agro Industries Ltd, Hathras
Escort Fort Tractor, Faridabad

4. LML Scooter Pvt Ltd, Kanpur

LML is manufacturing two wheeler in a technical collaboration agreement signed with Piaggio of Italy.

5. Sanchar Antenna and Communication Ltd., New Delhi

Research Interest

Synthesis of different hierarchical nanostructured materials.
Synthesis of vertically grown 2D Sheets of different metal chalcogenides.
Development of stable and efficient photoelectrode for photoelectrochemical water splitting.
Development of suitable material for electrochemical H₂ and O₂ evolution.

COURSES TAUGHT/ TEACHING

EEE C443	Analog and Digital VLSI Design
EEE C424	Microelectronic Circuits
INSTR C313	Microelectronic Circuits
MEL G641	Analog IC Design
MEL G623	Advanced VLSI Design
EEE C381	Electronic Devices and Integrated circuits
EEE C364	Analog Electronics
ES C252	Basic Electronics ( equivalent Electrical Science-I)
ES C231	Circuit Theory ( equivalent Electrical Science-II)
EEE C272	Circuits and Signals

TEACHER---I am a passionate teacher always interested in working with/ or training fresh minds with logical thinking. Teaching, gives me opportunities to engage young minds to be a good team member as well as a competent professionals. I am always interested in linking my class room teaching with concepts of other courses and practical aspects of the subject. My aim is always to build, in my students, a strong foundation of fundamental concepts through continuous emphasis on them with examples solved , in real time, on black board/ slides/ tablet (in online mode) using animations. Fundamentals. I strongly feel that this strong foundation prepares the students for accepting the real life challenges. It gives me immense pleasure if students perform well in their higher studies/ and profession. The energetic freshness of my students drives me immensely to improve my teaching abilities continuously.

New Course Development

New courses introduced and Developed At BITS, Pilani

Analog and Digital VLSI Design EEE C443
Microelectronic Circuits EEE C424/instr C313
EEE G547 DEVICE DRIVERS ( coordinated with embedded system faculty CEERI scientists and our student alumni to get their feedback about course content)

Course Content Developed

MEL G623 Advanced VLSI Design
MEL G625 AdvancecAnalog & Mixed Signal Design (ongoing)

New programs Developed--

Member of expert committee---

2-4, 5 year MS program in Telecommunication and Networking for WILP
Integrated M.Tech. (Microelectronics) program for WILP

Courses Taught and Summer Term Assignments

Till Summer Term 2021-22 :

Courses Taught:

Sr No	Course	No. of Times
01	MEL641 CAD for IC design (IC) (Taught four times in tele-presence system and* delivered from Pilani campus )*	19
02	MEL641 CAD for IC design (L)	01
03	MEL/EEE/CS G531 Testable design and fault tolerant computing (L)	02
04	MEL G626 VLSI Test and Testability (IC) (Taught five times in tele-presence system* delivered from Pilani campus, an higher degree elective for ME Microelectronics and ME embedded system with 40+ enrollment from each campus)*	09
05	MEL G625 Advanced Analog Mixed Signal Design (IC)	03
06	EEE C364/ INSTR C364 Analog Electronics (L=07 times) + (IC one time)	08
07	EEE C364/ INSTR C364 Analog Electronics (T)	03
08	EEE/INSTR C424 Microelectronic Circuits (IC)	01
09	EEE/INSTR C424 Microelectronic Circuits (T)	05
10	ES C262 Digital Electronics and Microprocessors (L)	01
11	EEE/INSTR C381 Electronic Devices and Integrated Circuits (L)	02
12	EEE/INSTR C381 Electronic Devices and Integrated Circuits (T)	01
13	CS/EEE/INTR/C263 Microprocessors Programming (P)	01
14	CS/EEE/INSTR C391 Digital Electronics and Computer Organization (T)	02
15	CS/EEE/INSTR C391 Digital Electronics and Computer Organization (P)	02
16	EEE C443/EEE F313 Analog and Digital VLSI Design (IC)	01
17	EEE C443/EEE F313 Analog and Digital VLSI Design (T)	02
18	EEE F111 Electrical Science (Lecture =5 times , Lecture with IC = 5 times)	10

19	EEE F111 Electrical Science (T)	04
20	EEE F341/INSTR F341 Analog Electronics (T)	01
21	EEE/INSTR F244 Microelectronic Circuits (L) (Lecture =2 times , Lecture with IC = 1 times)	03
22	EEE/INSTR F244 Microelectronic Circuits (T)	03
23	EEE F214/INSTR F214 Electronic Devices (T)	02
24	EEE G543 Power Device Microelectronics and Selection (IC)	01
25	BITS G540 Research Practice total students guided till date	50

FDTS/HDTS/Study in Advance Topics/ Research Practice: (After 2010)

Sr. No.	Course	No. of students 2010 -2021-22(s2)
01	BITS C421T/ BITS C422T First Degree Thesis	36
02	BITS C629T Higher Degree Thesis	03
03	BITS G513 Study in Advanced Topics	01
04	BITS G540 Research Practice	55

* LP/SP/DP: 99

*ES ZG628T Dissertation (Mentor, No. of students:45)

Before 2010:

Sr. No.	Course	No. of students 2002-2010 (S2)
01	BITS C421T/ BITS C422T First Degree Thesis	03
02	BITS G621 Professional Practice -II	15
03	LOP/COP/SOP	52

Project type courses: Lab Project/Study Projects/ Design Project/ Special Project: 150 +

PS-1 Course Instructor:

PS-1 instructor for 10 time

Engagement in each semester and Summer term:

2001-02 (S2)

MEL641 CAD for IC design (L)

2001-02 (ST)

BITS C221: PS-1, SPB Ltd. Erode

20 May 2002 to 17 July 2002

2002-03 (S1)

MELG621 VLSI Design (L)

EEE/INSTR C381 Electronic Devices and Integrated Circuits (T)

2002-03 (S2)

MEL641 CAD for IC design (IC)

ES C262 Digital Electronics and Microprocessors (L)

2003-04 (S1)

EEE/INSTR C424 Microelectronic Circuits (T)

MEL/EEE/CS G531 Testable design and fault tolerant computing (L)

2003-04 (S2)

EEE C364/ INSTR C364 Analog Electronics (L)

EEE C443/EEE F313 Analog and Digital VLSI Design (T)

CS/EEE/INTR/C263 Microprocessors Programming (P)

2004-05 (S1)

MEL/EEE/CS G531 Testable design and fault tolerant computing (L)

EEE C424 Microelectronic Circuits (T)

CS/EEE/INSTR C391 Digital Electronics and Computer Organization (P)

BITS C421 FDTS (No. of Students: 1)

BITS G621 Professional Practice II

(No. of Students: 2)

BITS C313 LAB ORIENTED PROJECT

(No. of students:3)

2004-05 (S2)

MEL641 CAD for IC design (IC)

EEE C364/ INSTR C364 Analog Electronics (L)

BITS C313 LAB ORIENTED PROJECT (No. of students:5)

BITS C331 COMPUTER PROJECT (No. of students:3)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

2005-06 (S1)

EEE/INSTR C424 Microelectronic Circuits (T)

EEE/INSTR C381 Electronic Devices and Integrated Circuits (L)

BITS G621 Professional Practice II (No. of Students: 2)

BITS C313 LAB ORIENTED PROJECT (No. of students:2)

BITS C331 COMPUTER PROJECT (No. of students:2)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

2005-06 (S2)

MEL641 CAD for IC design (IC)

EEE C364/ INSTR C364 Analog Electronics (L)

BITS C313 LAB ORIENTED PROJECT (No. of students:4)

BITS C331 COMPUTER PROJECT (No. of students:2)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

2006-07 (S1)

MEL G626 VLSI Test and Testability (IC)

EEE C443/EEE F313 Analog and Digital VLSI Design (T)

BITS C421 FDTS (No. of Students: 2)

BITS G621 Professional Practice II (No. of Students: 2)

BITS C313 LAB ORIENTED PROJECT (No. of Students: 6)

2006-07 (S2)

MEL641 CAD for IC design (IC)

EEE C364/ INSTR C364 Analog Electronics (L)

BITS G621 Professional Practice II (No. of Students: 2)

BITS C313 LAB ORIENTED PROJECT (No. of students:5)

2006-07 (ST)

BITS C221:PS-1 SPM Ltd. Sirpur, Kagaznagar

22 May 2007 to 18 July 207

2007-08 (S1)

MEL G625 Advanced Analog Mixed Signal Design (IC)

EEE C443/EEE F313 Analog and Digital VLSI Design (L)

BITS G621 Professional Practice II (No. of Students: 1)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

BITS C313 LAB ORIENTED PROJECT (No. of students:3)

2007-08 (S2)

MEL641 CAD for IC design (IC)

EEE C364/ INSTR C364 Analog Electronics (L)

BITS C313 LAB ORIENTED PROJECT (No. of students:5)

BITS C331 COMPUTER PROJECT (No. of students:1)

2008-09 (S1)

MEL G625 Advanced Analog Mixed Signal Design (IC)

ES C241 Electrical Sciences I (T)

BITS G621 Professional Practice II (No. of Students: 1)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

BITS C313 LAB ORIENTED PROJECT (No. of students:3)

2008-09 (S2)

MEL641 CAD for IC design (IC)

EEE C364/ INSTR C364 Analog Electronics (L)

BITS G621 Professional Practice II (No. of Students: 2)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

BITS C313 LAB ORIENTED PROJECT (No. of students:1)

2008-09 (ST)

BITSAT Examination

Detained for WILP assignments

2009-10 (S1)

MEL G625 Advanced Analog Mixed Signal Design (IC)

EEE/INSTR C424 Microelectronic Circuits (T)

BITS G621 Professional Practice II (No. of Students: 2)

BITS C313 LAB ORIENTED PROJECT

(No. of students:1)

2009-10 (S2)

MEL641 CAD for IC design (IC)

EEE C364/ INSTR C364 Analog Electronics (L, IC)

BITS G621 Professional Practice II (No. of Students: 1)

BITS C313 LAB ORIENTED PROJECT (No. of students:5)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

2009-10 (ST)

BITSAT Examination

2010-11 (S1)

CS/EEE/INSTR C391 Digital Electronics and Computer Organization (T, P)

ES C241 Electrical Sciences I (L)

BITS C313 LAB ORIENTED PROJECT (No. of students:1)

BITS C323 STUDY ORIENTED PROJECT (No. of students:4)

2010-11 (S2)

MEL641 CAD for IC design (IC)

EEE C364/ INSTR C364 Analog Electronics (L)

BITS C313 LAB ORIENTED PROJECT (No. of students:1)

BITS C323 STUDY ORIENTED PROJECT (No. of students:3)

BITS C331 COMPUTER PROJECT (No. of students:1)

2010-11 (ST)

BITS C221:PS-1 RAPS, Rawatbhata

21 May 2011 to 17 July 2011

2011-12 (S1)

EEE G543 Power Device Microelectronics and Selection (IC)

ES C241 Electrical Sciences I (L)

BITS C421T/ BITS C422T FDTS (No. of students:03)

BITS C313 LAB ORIENTED PROJECT (No. of students:2)

BITS C323 STUDY ORIENTED PROJECT (No. of students:2)

2011-12 (S2)

MEL641 CAD for IC design (IC)

EEE F111 Electrical Science (T)

BITS G540 Research Practice ( No. of students:05)

BITS C629T Higher Degree Dissertation (No. of students:01)

BITS C421T/ BITS C422T FDTS (No. of students:05)

BITS C323 STUDY ORIENTED PROJECT (No. of students:4)

BITS C331 COMPUTER PROJECT (No. of students:1)

2011-12 (ST)

BITS C221
PS-1 Nagpur (GlobalLogic, Windals Precision)

19 May 2012 to 15 July 2012

2012-13 (S1)

CS/EEE/INSTR C391 Digital Electronics and Computer Organization (T)

EEE F215 Digital Design (T)

EEE/INSTR C424 Microelectronic Circuits (T)

EEE C443/EEE F313 Analog and Digital VLSI Design (T)

BITS C421T/ BITS C422T FDTS (No. of students:03)

BITS C313 LAB ORIENTED PROJECT (No. of students:3)

BITS C323 STUDY ORIENTED PROJECT (No. of students:1)

BITS C331 COMPUTER PROJECT (No. of students:1)

2012-13 (S2)

MEL641 CAD for IC design (IC) --telepresence

EEE/INSTR F244 Microelectronic Circuits (L, IC)

BITS G540 Research Practice ( No. of students:02)

BITS C629T Higher Degree Dissertation (No. of students:02)

BITS C421T/ BITS C422T FDTS (No. of students:01)

BITS C313 LAB ORIENTED PROJECT (No. of students:3)

BITS C323 STUDY ORIENTED PROJECT (No. of students:3)

2012-13 (ST)

BITS C221

PS-1 Nagpur (GlobalLogic, Windals Precision, NEERI, Metalfab Hightech Pvt Ltd.), Awarpur (Awarpur Cement Works)

20 May 2013 to 15 July 2013

2013-14 (S1)

EEE/INSTR C424 Microelectronic Circuits (IC)

EEE/INSTR C381 Electronic Devices and Integrated Circuits (T)

EEE F214 Electronic Devices and Integrated Circuits (T)

BITS C421T/ BITS C422T FDTS (No. of students:03)

BITS C313 LAB ORIENTED PROJECT (No. of students:2)

EEE/INSTR F366 LABORATORY PROJECT (No. of students:1)

EEE/INSTR F266 STUDY PROJECT (No. of students:2)

2013-14 (S2)

MEL641 CAD for IC design (IC) --telepresence

EEE/INSTR F244 Microelectronic Circuits (L,T)

BITS G540 Research Practice (No. of students:04)

BITS C421T/ BITS C422T FDTS (No. of students:01)

BITS C323 STUDY ORIENTED PROJECT (No. of students:3)

EEE/INSTR F376 DESIGN PROJECT (No. of students:1)

EEE/INSTR F366 LABORATORY PROJECT (No. of students:1)

EEE/INSTR F266 STUDY PROJECT (No. of students:1)

2013-14 (ST)

Industry Immersion Program

25 May to 5 July 2014 at "Cypress Semiconductor Limited, Bangalore".

2014-15 (S1)

EEE F313/INSTR F313 Analog and Digital VLSI Design (T)

MEL G626 VLSI Test and Testability (IC)

EEE F214/INSTR F214 Electronic Devices (T)

BITS C421T/ BITS C422T FDTS (No. of students:02)

EEE/INSTR F376 DESIGN PROJECT (No. of students:1)

EEE/INSTR F366 LABORATORY PROJECT (No. of students:6)

2014-15 (S2)

MEL641 CAD for IC design (IC) --telepresence

EEE/INSTR F244 Microelectronic Circuits (T)

EEE F111 Electrical Science (T)

BITS G540 Research Practice (No of students:05)

BITS C421T/ BITS C422T FDTS (No. of students:04)

EEE/INSTR F376 DESIGN PROJECT (No. of students:1)

EEE/INSTR F366 LABORATORY PROJECT (No. of students:2)

EEE/INSTR F266 STUDY PROJECT (No. of students:2)

EEE F491L SPECIAL PROJECT (No. of students:1)

2014-15 (ST)

BITS C221
PS-1 at Adani power Tirora and Globallogic Nagpur

20 May 2015 to 18 July 2015

2015-16 (S1)

EEE F313/INSTR F313 Analog and Digital VLSI Design (T)

MEL G626 VLSI Test and Testability (IC) --telepresence

EEE F214/INSTR F214 Electronic Devices (T)

BITS C421T/ BITS C422T FDTS (No. of students:01)
EEE/INSTR F376 DESIGN PROJECT (No. of students:3)
EEE/INSTR F366 LABORATORY PROJECT (No. of students:3)

2015-16 (S2)

MEL641 CAD for IC design (IC) --telepresence

EEE F111 Electrical Science (IC)

BITS G540 Research Practice (No. of students:04)

BITS C421T/ BITS C422T FDTS (No. of students:02)
INSTR F376 DESIGN PROJECT (No. of students:2)
INSTR F266 LABORATORY PROJECT (No. of students:2)

2015-16 (ST)

BITS C221

PS-1 at Adani power Tirora and Globallogic Nagpur

21 May 2016 to 18 July 2016

2016-17 (S1)

EEE F313/INSTR F313 Analog and Digital VLSI Design (T)

MEL G626 VLSI Test and Testability (IC) --telepresence

EEE F214/INSTR F214 Electronic Devices (T)

BITS C421T/ BITS C422T FDTS (No. of students:02)

EEE F366 LABORATORY PROJECT (No. of students:2)

2016-17 (S2)

MEL641 CAD for IC design (IC)

EEE F111 Electrical Science (L)

BITS G540 Research Practice ( No. of students:04)

BITS C421T/ BITS C422T FDTS (No. of students:02)
EEE F376 DESIGN PROJECT (No. of students:3)

INSTR F376 DESIGN PROJECT (No. of students:1)

2016-17 (ST)

2017-18 (S1)

EEE F111 Electrical Science (L)

MEL G626 VLSI Test and Testability (IC) --telepresence

EEE F313/INSTR F313 Analog and Digital VLSI Design (T)

BITS G513: Study in Advanced Topics (No. of students:01)

IS F376 DESIGN PROJECT (No. of students:1)

2017-18 (S2)

MEL641 CAD for IC design (IC)

EEE/INSTR F244 Microelectronic Circuits (T)

BITS G540 Research Practice ( No. of students:03)

BITS C421T/ BITS C422T FDTS (No. of students:01)

EEE F266 STUDY PROJECT (No. of students:2)

INSTR F366 LABORATORY PROJECT (No. of students:1)

2017-18 (ST)

University Immersion at Visiting Assistant Professor' University of Virginia, Charlottesvillie

20 May 2018 to 20 July 2018

2018-19 (S1)

EEE F111 Electrical Science (IC)

MEL G626 VLSI Test and Testability (IC) --telepresence

ES ZG628T Dissertation (Mentor, No. of students:01)

EEE F376 DESIGN PROJECT (No. of students:1)

2018-19 (S2)

MEL641 CAD for IC design (IC)

EEE/INSTR F244 Microelectronic Circuits (L)

BITS G540 Research Practice ( No. of students:06)

BITS C421T/ BITS C422T FDTS (No. of students:03)

ES ZG628T Dissertation (Mentor, No. of students:04)

2018-19 (ST)

BITS C221
PS-1 at Adani power Tirora and See Tech Nagpur, Geomitra Solutions Nagpur

19 May 2019 to 15 July 2019

2019-20 (S1)

EEE F111 Electrical Science (IC)

MEL G626 VLSI Test and Testability (IC) --telepresence

ES ZG628T Dissertation (Mentor, No. of students:01)
EEE F267 STUDY PROJECT (No. of students:1)

2019-20 (S2)

MEL641 CAD for IC design (IC)

EEE/INSTR F244 Microelectronic Circuits (T)

EEE F341/INSTR F341 Analog Electronics (T)

BITS G540 Research Practice ( No. of students:06)

BITS C421T/ BITS C422T FDTS (No. of students:01)

EEE F376 DESIGN PROJECT (No. of students:1)

INSTR F376 DESIGN PROJECT (No. of students:1)

EEE F266 STUDY PROJECT (No. of students:2)

ES ZG628T Dissertation (Mentor, No. of students:04)

2019-20 (ST)

BITS C221
PS-1 at online: CEERI Pilani, Electrono Solutions, Bangalore, Pyrotech Electronics Udaipur

18 May 2020 to 27 June 2020

-------------------------------------------------------------------------------------------------------------------------

2020-21 (S1)

EEE F111 Electrical Science (L)

MEL G626 VLSI Test and Testability (IC)

BITS C421T/ BITS C422T FDTS (No. of students:01)

ES ZG628T Dissertation (Mentor, No. of students:04)

EEE F376DESIGN PROJECT (No. of students:1)

EEE F266 STUDY PROJECT (No. of students:1)

INSTR F266 STUDY PROJECT (No. of students:1)

EEE F366 LABORATORY PROJECT (No. of students:1)

2020-21 (S2)

EEE F111 Electrical Science (L, IC)

MEL641 CAD for IC design (IC)

BITS G540 Research Practice (No. of students:06)

ES ZG628T Dissertation (Mentor, No. of students:12)

EEE F377 DESIGN PROJECT (No. of students:2)

2021-22 (S1)

EEE F111 Electrical Science (L, old)

EEE F111 Electrical Science (L, NAS)

EEE F111 Electrical Science (T, NAS)

MEL G626 VLSI Test and Testability (IC)

ES ZG628T Dissertation (Mentor, No. of students:05)

EEE F376 DESIGN PROJECT (No. of students:1)

INSTR F266 STUDY PROJECT (No. of students:1)

INSTR F366 LABORATORY PROJECT (No. of students:2)

2021-22 (S2)

EEE F111 Electrical Science (IC) -- NAS

EEE F111 Electrical Science (T) -- NAS

MEL641 CAD for IC design (IC)

BITS G540 Research Practice ( No. of students:10)

BITS C421T/ BITS C422T FDTS (No. of students:1)

ES ZG628T Dissertation (Mentor, No. of students:10)

EEE F376 DESIGN PROJECT (No. of students:2)

INSTR F376 DESIGN PROJECT (No. of students:3)

INSTR F266 STUDY PROJECT (No. of students:1)

2021-22 (ST):

Detained for summer term from 27 June 2022 to 18 August 2022 for teaching following courses to new academic session students admitted in first year:

EEE F111 Electrical Science (IC) -- NAS

EEE F111 Electrical Science (T) -- NAS

2021-22 (ST): Detained for teaching

EEE F111 Electrical Science (IC) -- NAS

EEE F111 Electrical Science (T) -- NAS

2022-23 (S1):

EEE F111 Electrical Science (IC)

MEL G626 VLSI Test and Testability (IC)

ES ZG628T Dissertation (Mentor, No. of students:04)

2022-23 (S2):

MEL641 CAD for IC design (IC)

EEE F341/INSTR F341 Analog Electronics (T)

BITS G540 Research Practice ( No. of students:10)

BITS C421T/ BITS C422T FDTS (No. of students:1)

ES ZG628T Dissertation (Mentor, No. of students:03)

EEE F376 DESIGN PROJECT (No. of students:04)

INSTR F376 DESIGN PROJECT (No. of students:02)

INSTR F266 STUDY PROJECT (No. of students:01)

2022-23 (ST):

BITS C221
PS-1 at onsite: CEERI Pilani

30 May 2023 to 21 July 2023

2023-24 (S1):

MEL G626 VLSI Test and Testability (IC)

EEE F214/INSTR F214 Electronic Devices (T)

EEE C443/EEE F313 Analog and Digital VLSI Design (T)

BITS C421T/ BITS C422T FDTS (No. of students:03)

ES ZG628T Dissertation (Mentor, No. of students: 01)

EEE/INSTR F376 DESIGN PROJECT (No. of students:2)

INSTR F266 STUDY PROJECT (No. of students: 3)

2023-24 (S2)

MEL641 CAD for IC design (IC)

EEE F111 Electrical Science (L)

EEE/INSTR F244 Microelectronic Circuits (T)

BITS G540 Research Practice ( No. of students:9)

BITS C629T Higher Degree Thesis (No. of students:2)

BITS C421T/ BITS C422T FDTS (No. of students:3)

ES ZG628T Dissertation (Mentor, No. of students:03)

EEE/INSTR F376 DESIGN PROJECT (No. of students:02)

INSTR F266 STUDY PROJECT (No. of students:01)

2023-24 (ST)

BITSAT examination from 22/6/2024 to 29/6/2024

Courses taught

Mathematical Methods in Chemical Engineering (CHE G523)

Electrochemical Engineering (CHE-G556)

Heat Transfer (CHE F241)

Thermodynamics (BITS F111)

Unit Operations -I (WILP-PE ZC319)

Chemical Process Calculations (CHE F211)

Chemical Engineering Lab I (CHE F312)

Chemical Engineering Lab II (CHE F341)

Research Interest

The research focus is centered around the following broad areas:

Catalysis Science and Applications
Materials Design for Catalysis
Renewables-based Sustainable Catalytic Technology
Catalyst-product Separations forEfficient Catalyst Recycle and Regeneration
CO2 to Chemicals
Biomass-based Platforms to Value-added Chemical Products
Advanced Techniques for Catalysis - Supercritical Phases, Membrane-assisted Nanofiltration
Green Chemistry Applications in Chemical Processes
For current research openings, kindly follow the 'Research Opportunities' tab

Courses

Semester - I

CHEM F337: Green Chemistry and Catalysis
CHEM F111: General Chemistry
CHEM F110: Chemistry Laboratory
CHEM F313: Instrumental Methods of Analysis
CHEM F214: Inorganic Chemistry - I

Semester - II

CHEM F431: Sustainable Chemistry using Renewables
CHEM F343: Inorganic Chemistry - III
CHEM F341: Chemical Experimentation II
CHEM F333: Chemistry of Materials
CHEM F111: General Chemistry
BITS F111: Thermodynamics

Project Type Courses (offered in both semesters)

CHEM F266: Study Project
CHEM F366: Laboratory Project
CHEM F376: Design Project
CHEM F491: Special Project

First Degree Thesis (offered in both semesters)

BITS F421T: Thesis (FDTS, MSc. Chemistry)

Courses

Financial Accounting
Corporate Finance
Financial Statement Analysis

Courses

2023-24

Principles of Economics (ECON F211)
Computational Method for Economics (ECON F215)
Issues in Economic Development (ECON F313)
Principles of Economics (ECON F211)

2022-23

Computational Methods for Economics (ECON F 215)
Principles of Economics (ECON F211)
Issues in Economic Development (ECON F313)

2021-22

Economics of Growth and Development (ECON F244)
Principles of Economics (ECON F211)
Mathematical & Statistical Methods for Economics (ECON F213)
Issues in Economic Development (ECON F313)

Teaching Exp.

Chemistry Lab (CHEM F110)
General Chemistry Tutorial (CHEM F111)
Instrumental Methods of Analysis Lab (CHEM F313)
Advance Inorganic Chemistry (CHEM G552)
Chemical Experimentation Lab (CHEM F)
Electrochemistry: Fundamentals and Applications (CHEM F327)
Chemical Experimentation II Lab (CHEM F341)
Thermodynamics tutorial (BITS F111)
Inorganic Chemistry II (CHEM F241)
Nanochemistry (CHEM F336)
General Chemistry Teaching (CHEM F111)
Inorganic Chemistry I (CHEM F214)

THEORY COURSES

CHEMISTRY-I (CHEM C141): Physical Chemistry topics for 1'st year B.E. and M.Sc.
CHEMISTRY-II (CHEM C142): Organic and Inorganic Chemistry topics for 1'st year B.E. and M.Sc.
THERMODYNAMICS-1 (ES C112): Engineering Thermodynamics for 1'st year B.E. and M.Sc.
GENERAL CHEMISTRY (CHEM F111): General Chemistry topics for I'st year B.E. and M.Sc.
CHEMISTRY OF ORGANIC COMPOUNDS (CHEM C232): Organic Chemistry for 2'nd year B.E. and M.Sc.
STRUCTURE AND REACTIVITY OF ORGANIC COMPOUNDS (CHEM C331): Organic Chemistry for 3'rd year B.E. and M.Sc.
ADVANCED ORGANIC CHEMISTRY (CHEM G551): Advanced Organic Chemistry for PhD students
FRONTIERS IN ORGANIC SYNTHESIS (CHEM F415) Instructor-in-Charge (IC), Sem-I, 2013-14: First-time launched new disciplinary elective course for M.Sc. students
ORGANIC CHEMISTRY AND DRUG DESIGN (CHEM F335) (IC), Sem-I, 2014-15: First-time launched new disciplinary elective course for M.Sc. students
GENERAL CHEMISTRY (CHEM F111), (IC); Sem-I, 2014-15: Compulsory course for all (920 students) of I'st year BE and MSc.
CATALYSIS (CHEM G556), (IC): Sem-II, 2014-15: First-time launched new elective course for PhD students.

LAB COURSES

MEASUREMENT TECHNIQUES -1: for 2'nd year B.E. and M.Sc.
CHEMISTY LAB (CHEM F110): for 1'st year B.E. and M.Sc.
CHEMICAL EXPERIMENTATION LAB (CHEM C411): for 3'rd year B.E. and M.Sc.
CHEMICAL EXPERIMENTATION LAB-1 (CHEM F242) (IC, 2013, Sem-II): First-time launched new lab course for 2'nd year B.E. and M.Sc.
CHEMISTRY PROJECT LAB (CHEM C231): for 2'nd/3'rd year B.E. and M.Sc.
INSTRUMENTATIONAL METHODS OF ANALYSIS (CHEM F313): for 3'rd year MSc

OTHER COURSES

BEGINNING CHINESE (CHI N101T): Spoken Mandarin language course open for all
Study Project
Lab Project
First Degree Thesis (for M.Sc. Chemistry students)

COURSES TAUGHT

Chemical Engineering Thermodynamics
Electrochemical Engineering
Unit Operations-2 (Course in Work Integrated Learning Program)
Corrosion Engineering (CHE F433) (Second Semester 2021-22)
Chemical Engineering Thermodynamics (Work Integrated Learning Program)
Environmental Pollution Control (Work Integrated Learning Program)
Thermodynamics (BITS F111)
Chemical Process Technology (CHE F419)
Colloids and Interface Engineering
Separation Processes-2

Teaching

My teaching interests are in building the foundation of the students by extending their understanding about the Principles & Applications of Chemistry; Exposing the students to the recent research activities in Chemistry mainly in the field of "Advanced Materials" and To develop in a student, research ability to design novel research schemes.

Courses Taught:

Inorganic Chemistry II (CDC of II year MSc Chemistry)
General Chemistry (Foundation course in Chemistry for all I year students)
Chemistry Lab (Lab based Foundation course in Chemistry for all I year students)
Chemical Experimentation I (Lab based CDC of II year MSc Chemistry)
Chemical Experimentation II (Lab based CDC of III year MSc Chemistry)
Chemistry of Materials (Discipline Elective of MSc Chemistry)
Instrumental Methods of Analysis (CDC of III year MSc Chemistry)
Electrochemistry: Fundamentals and Applications (Discipline Elective of MSc Chemistry)
Engineering Materials (WILP course)
Chemistry of Organic Compounds
Measurement Technique I
Chemistry I
Chemistry II
Structure and Properties of Materials
Chemistry Project Labs

Area of Interest

Teaching

Principles of Economics,
Security Analysis and Portfolio Management,
Financial Management,
Macroeconomics,
Project Appraisal,
Money, Banking and Financial Markets,
Risk Management and Insurance,
International Economics,
Financial Economics,
Economics of Growth and Development.
Economic Environment of Business.

Courses Taught and Teaching

Principles of Economics
Principles of Management
Financial Management
Security Analysis and Portfolio Management
Project Appraisal
Macroeconomics
International Economics
Economic Growth and Development
Money, Banking and Financial Market
Development Economics
Risk Management and Insurance
Economic Environment of Business.
Management of Banks and Financial Institutions

Courses Developed

International Economics (as a Compulsory Disciplinary Course (CDC) for M.Sc. Economics Students)
Risk Management and Insurance (as an elective for Finance, Management and Economics Students)
Money, Banking and Financial Markets (as a Compulsory Disciplinary Course (CDC) for M.Sc. Economics.

Course Curriculum Development at BITS Pilani

Re designed Course Curriculum for M.Sc. (Hons.) Economics in 2010-11
Re designed Course Curriculum for M.Sc. (Hons.) Finance in 2010-11
Designed Course Curriculum for M. Phil. Economics and Finance in 2008-2009
Designed Course Curriculum for Minor in Finance in 2013-14

Course Curriculum Development at Central University of Rajasthan

Re designed Course structure for M. A. Economics (2 Years)
Re designed Course structure for Integrated M. Sc. Economics (5 Years)
Re designed Course structure for Integrated M.Sc. B.Ed. Economics (3 years)

Courses

2022-23

Green Buildings and Energy Conservation (CE F423)
Infrastructure Planning and Management (CE G520)

2023-24

WILP-Environmental Impact and Risk Assessment (SSTM ZG528)
Environmental Sampling and Analytical Methods (EE G501)
Introduction to Environmental Engineering (CE F323)
Water and Wastewater Treatment Systems (EE G502)

2024-25 (Ongoing)

Environmental Sampling and Analytical Methods (EE G501)
Environmental Studies (BITS F225)

Courses

Dynamics of Structures (CE G551)
Transportation Systems Planning and Management (CE G523)
Advanced Concrete Technology (CE G562)
Prestressed Concrete (CE G614)
Design of Prestressed Concrete Structure (CE F415)
Advanced Concrete Structures (CE G613)

Courses

Courses teaching in the current Semester (2022-2023), BITS Pilani

Engineering Hydrology
Water and Wastewater Treatment

Courses taught at University of Minnesota, U.S.A (2019-2020)

Assessment and Diagnosis of Impaired Waters
Hydrology and Water Quality Field methods

Courses taught at BITS Pilani

Environmental Statistics
Environmental Studies
Water Resource Planning and Management
Fundamentals of System Engineering
Multi-criteria Analysis in Engineering
Engineering Hydrology

Courses Taught

Chemistry I (CHEM C141)
Chemistry II (CHEM C142)
Thermodynamics (ES C112)
Measurement Technique-I (TA C211)
Structure and Properties of Materials (ES C242)
Chemistry Project Lab (CHEM C231)
Chemical Kinetics (CHEM C311)
Bonding in Inorganic Compounds (CHEM C352)
Advanced Inorganic Chemistry (BITS G513/BITS G552)
Study Oriented Project (BITS 323)
Laboratory Oriented Project(BITS 313)
Chemical Experimentation Lab (CHEM
General Chemistry (CHEM F111)
Chemistry Laboratory (CHEM F110)
Instrumental Methods of Analysis (CHEM F313)
Inorganic Chemistry I (CHEM F214)
Inorganic Chemistry II (CHEM F241)
Inorganic Chemistry III (CHEM F343)
Chemical Experimentation II (CHEM F341)
Laboratory Project (CHEM F366)
Study Project (CHEM F266)
Special Project (CHEM F491)

Teaching Courses

Chemistry 1 (CHEM C141)
Chemistry 2 (CHEM C142)
Chemistry Laboratory (CHEM F110)
Quantum Chemistry (CHEM C322)
Structure and Properties of Materials (ES C242)
Chemistry Project Lab(CHEM C231)
Computational Chemistry (CHEM C351)
Thermodynamics for Engineering Students (ES C112)
Measurements and Techniques 1 (CHEM C211)
M.Sc. Thesis based course (BITS C313/C314)
Electronic Structure Theory: Ph.D. students (CHEM G529)
Chemical Applications of Group Theory: Ph.D. students (CHEM G541)
Electron Correlation in Atoms and Molecules (CHEM F413)
Instrumentation Methods of Analysis (CHEM F313)
Thermodynamics (BITS F111)
Physical Chemistry II (CHEM F213)
Physical Chemistry III (CHEM F244)
Chemical Experimentation II (CHEM F341)
Physical Chemistry IV (CHEM F312)
Advanced Physical Chem (Ph.D. students)

Courses

Pavement Failure Evaluation and Rehabilitation
Highway Geometric Design
Pavement Analysis and Design
Highway Construction Techniques

My Teaching

aEG

WSREG

This is the heading

COURSES TAUGHT

Courses in Current Semester

Optics Lectures
Optics Tutorials
Physics Lab

Courses Taught

Mechanics Oscillations and Waves (MEOW) (F111 Class of 450 students): LTC Lectures (2nd Part): 5 times
General Physics PHY F112 Lectures and Tutorials
Mechanics Oscillations and Waves (MEOW) (F111 Class of 450 students): LTC Lectures (Ist Part): 2 times
Atomic and Molecular Physics PHY C 342 Lectures and tutorials
Instrumentation / Experimental Methods of Physics (PHY C351/PHY F417/INSTR F412). Lectures
Thermodynamics
Optics
Atomic and Molecular Spectroscopy
Modern Physics
Instrumental Methods of Analysis
Measurement Techniques
Physics I ( LTC Lectures: Class of 400 students: 4 times)
Physics II
Physics Laboratory
Electromag. and Optics laboratory
Modern Physics laboratory
Advanced Physics Laboratory

To be updated.

Teaching

S. No.	Name of the course	Level
1	Reinforced Soil Structures for Transportation Engineers	PG
2	Ground Improvement Technique	PG
3	Design of Foundations for Dynamic Loads	PG
4	Earthquake Engineering	PG
5	Advanced Foundation Engineering	PG
6	Advance Soil Mechanics	PG
7	Dynamics of Structures	PG
8	Pavement Material Characterization	PG
9	Highway Construction Practices	PG
10	Project Planning and Management	PG
11	Highway Geometric Design	PG
12	Geosynthetics and Reinforced Soil Structures	UG
13	Foundation Engineering	UG
14	Geotechnical Earthquake Engineering and Machine foundation	UG
15	Design of Foundation Systems	UG
16	Soil Mechanics	UG
17	Earthquake Resistant Design & Construction	UG
18	Structural Dynamics	UG
19	Soil Mechanics & Foundation Engg	UG
20	Construction Planning and Technology	UG
21	Construction Materials	UG
22	Building Materials and Technology	UG
23	Mechanics of Solids	UG
24	Transportation Engineering	UG
25	Civil Engineering Practice	UG
26	Engineering Graphics	UG

Involvement in curriculum development as a member of the task force for UG and PG program of Civil Engineering.
Revised and improved contents of several courses.
Developed and taught following new courses when started first time.

Course Code	Course Name	Level
CE G515	Dynamics of Structures	PG
CE G632	Design of Foundations for Dynamic Loads	PG
CE C419	Geotechnical Earthquake Engineering and Machine Foundation	UG
CEF428	Earthquake Resistant Design and Construction	UG
CE F214	Construction Materials	UG
CE F426	Geosynthetics and Reinforced Soil Structures	UG
CE F429	Design of Foundation Systems	UG
TEZG513	Reinforced Soil Structures for Transportation Engineers	PG

Teaching

Under Graduate | First Degree | BE

Unit Operations-II
Process Design Principles
Kinetics & Reactor Design
Numerical Methods for Chemical Engineers
Chemical Engineering Thermodynamics
Fluid Flow Operations | Fluid Mechanics
Biochemical Engineering
Environmental Pollution Control
Environment, Development & Climate Change
Environmental Studies
Measurement Techniques-II | Engineering Measurements
Chemical Engineering Laboratory-I

Post Graduate | Higher Degree | ME

Advanced Transport Phenomena
Advanced Chemical Engineering Thermodynamics
Reaction Engineering
Advanced Separation Processes
Advanced Separation Technology

The mediocre teacher tells. The good teacher explains. The superior teacher demonstrates. The great teacher inspires.

... William Arthur Ward

Courses Taught

At First Degree (UG) Level

BITS F110: ENGINEERING GRAPHICS (LAB)

CE F211: MECHANICS OF SOLIDS

CE F241: ANALYSIS OF STRUCTURES

CE F311: DES OF CONCRETE STRUCTURES

CE F320: DESIGN OF REINFORCED CONCRETE STRUCTURES

CE F343: DES OF STEEL STRUCTURES

CE C381: DESIGN OF STEEL STRUCTURES

CE F415: DESIGN OF PRESTRESSED CONCRETE STRUCTURES

CE F420: INTRODUCTION TO BRIDGE ENGG

CE C422: DESIGN OF BRIDGE STRUCTURES

CE F430: DESIGN OF ADVANCED CONCRETE STRUCTURES

CE F435: INTRODUCTION TO FEM

At Higher Degree (PG) Level

CE G613: ADVANCED CONCRETE STRUCTURES

CE G614: PRESTRESSED CONCRETE STRUCTURES

CE G615: EARTHQUAKE ENGINEERING

CE G616: BRIDGE ENGINEERING

CE G617: ADVANCED STRUCTURAL ANALYSIS

CE G619: FINITE ELEMENT METHOD

CE G554: ADVANCED STRUCTURAL DESIGN

Courses

Fall Session:

Thermodynamics (BITS F111)
Chemical Engineering Thermodynamics (CHE-F213)
Process Design Principles-1 (CHE-F314)

Spring Session:

Modeling & Simulation in Chemical Engineering (CHE-F418)
Chemical Engineering Lab-2 (CHE-F341)

Summer:

Practice School (PS)-1

Teaching

Introductory Psychology (GS F232)
Introduction to Conflict Management (GS F311)
Introduction to Social Psychology (HSS F372)
Science of Sustainable Happiness (HSS F365 )
Emergency Sanitation and Leadership (SAN G515)
Emergency Sanitation and Leadership (SSTM ZG515) for (WILP)
Technical Report Writing (BITS F112)
PhD and MPhil courses

Courses

CHE421 Biochemical Engineering
BITS F111 Thermodynamics

Courses

Atomic and Molecular Simulations
Introduction to Nanoscience
Applied Transport Phenomena
Environmental Studies
Heat Transfer (Tutorial Instructor)
Process Dynamics and Control (Tutorial Instructor)
Fluid Mechanics (Tutorial Instructor)
Chemical Engineering Lab-I (Lab Instructor)
Chemical Engineering Lab-II (Lab Instructor)

Courses

Heat Transfer
Reaction Engineering
Kinetics and Reactor Design
Process Dynamics and Control
Advance Process Control
Modeling and Simulation for Chemical Engineering
Chemical Engineering Laboratory- I& II

Courses

Sl No	Course No	Course Title	Credit Unit			BE/ME/Core/ Elective/WILP	Remark
Sl No	Course No	Course Title	Lecture	Practical/ Project	Total	BE/ME/Core/ Elective/WILP	Remark
1	CHE F211	Chemical Process Calculations	3	0	3	BE/Core
3	CHE F212	Fluid Mechanics	3	0	3	BE/Core
2	CHE F213	Chemical Engineering Thermodynamics	3	0	3	BE/Core
4	CHE F241	Heat Transfer	3	0	3	BE/Core
5	CHE F243	Material Science & Engineering	3	0	3	BE/Core
6	CHE F312	Chemical Engineering Laboratory I	0	3	3	BE/Core
7	BITS F418	Introduction to Biomedical Engineering	3	1	4	BE/ME/ Elective	Proposed, developed, & floated
8	BITS F429	Nanotechnology for Renewable Energy and Environment	3	1	4	BE/ME/ Elective	Proposed, developed, & floated
9	CHE G522	Polymer Technology	3	1	4	BE/ME/ Elective
10	CHE G528	Introduction to Nanoscience & Technology	3	1	4	BE/ME/ Elective
11	CHE G622	Advanced Chemical Engineering Thermodynamics			5	ME/ Core
12	BITS G661	Research Methodology I			5	ME/ Core
13	MST G521	Material Characterization Techniques	3	2	5	ME/ Elective
14	MST F331	Materials Characterization	3	1	4	BE/Core
15	MST F332	Materials Processing	3	0	3	BE/Core
16	POWAB ZC411/POWJS ZC411/ POWTP ZC411	Environmental Pollution Control	3	0	0	Online WILP
17	PE ZC319	UNIT OPERATIONS – I	3	0	0	Online WILP
18	EE ZG614	Air Pollution Control Technologies	3	0	0	Online WILP

Courses

Experience

P.C. Sande completed her ME and PhD from BITS Pilani. Her Doctoral thesis was in the field of CFD simulation of reactors. She has more than 13 years of research and teaching experience, and is currently serving as Assistant Professor at Department of Chemical Engineering BITS, Pilani; Pilani campus. She has taught more than ten different Chemical Engineering courses for UG & PG students, including Thermodynamics, CFD, Petroleum engineering, Research Methodology and Technical communication. She has contributed to the Work Integrated Learning Program of the institute. She has published journals with American Chemical Society, Elsevier, Taylor and Francis, Sage and Springer. She is part of Academic Counselling Cell of the Institute, and has held other positions at the Department level. She has contributed to BITS Pilani Library over the years. Apart from engineering she also researches on creative thinking and engineering education. She is an avid reader in general and studies the Old and New Testament regularly.

Courses

Course 01
Course 02
Course 03

Teaching

CS F469: Information Retrieval(Spring 2024, BITS Pilani)

Undergraduate course, BITS Pilani, CSIS, 2024

Lecture content can be found here

CS F426: Graph Mining (Fall 2023,BITS Pilani)

Undergraduate/Post-Graduate Course, BITS Pilani, CSIS, 2023

Taught in previous semester

IS ZC313 Object Oriented Programming and Design
CSF469 Information Retrieval
CSF363 Compiler Construction

In upcoming semester:

CSF426 Graph Mining ^N^ew

This course will be introduced first time in the fall 2021 semester.

Graph Mining has gained tremendous popularity in last few years. Graphs are everywhere: be it social networks, molecules, citation networks and many more. Data of any shape where different points hold some kinds of relationships can form graphs. This course motivates to study the underlying graph structures and its features by allowing students to apply a class of machine learning techniques and data mining tools to reveal insights on a variety of real graphs. For tentative handout click here

Fun Part: Every two lectures followed by a small programming exercise with missing lines of code type quiz. Those who attempt filling gaps, get bonus marks (+ in final marks).

Course Prerequisites: Basic knowledge of probabilty theory, data mining and machine learning.

Courses

I am associated with the following courses of the Dept:

General Biology(First Degree)
Biological Laboratory(First Degree)
Genetics(First Degree)
Animal Cell Technology(Higher Degree)
Cancer Biology(Higher Degree)
Human Genetics(Higher Degree)
Stem cell & Regenerative Biology(Higher Degree)
Experimental Techniques(Higher Degree)

Courses

Currently Teaching:

IS ZC313 - Object Oriented Programming and Design
CS F372 - Operating Systems

Previously taught:

CS F111 - Computer Programming
CS F213 - Object Oriented Programming
CSI ZG513/ ES ZG513/ SS ZG513 - Network Security
TA ZC163 - Computer Programming

Teaching Experience

BIO F111 (General Biology)
TAC 211 (Measurement and Techniques-I)
BIO C231 (Biology Project Laboratory)
BIO F212 (Microbiology)
BIO C322 (Genetics)
BIO C418 (Genetic Engineering Tech)
BIO C461 (Recombinant DNA Technology)
BIO C542 (Advance Cellular and Molecular Biology)
BIO G523 (Advance and Applied Microbiology)
BIO G525 (Environmental Biotechnology and Waste Management)
BIO C642 (Experimental Techniques)

Research Interest

Broad research Interest

Plant-Microbe Interactions, Biodegradation, Microbial Ecology, & host-pathogen interaction.

Plant Microbe Interaction

Understanding the role of microorganisms in sustainable agriculture, aim of my research group is to study various aspects of plant growth promoting rhizobacteria especially endophytic bacteria. This includes molecular diversity, temporal dynamics of endophytic bacteria in field grown crop plants, characterization of different plant growth promoting and biocontrol properties (nitrogen fixation, phosphate solubilization, indole-3-acetic acid production, induced systemic tolerance and induced systemic resistance and antagonistic activities) and mechanism for endophytic colonization. One of the major questions we are trying to answer is: how do host plants modulate their immune response in beneficial (endophytic) and harmful (pathogenic) bacterial interactions. Our long term goal is to understand molecular mechanism involved in plant-endophytic bacteria interaction employing proteomic and transcriptomic approaches.

Another work addresses amelioration of abiotic stressors, major factors affecting plant growth, using PGPB. These PGPB can promote plant growth in saline soils by reducing level of stress-ethylene, helping in maintaining osmotic balance and Na+/K+ ratio, other mechanisms. We are studying the effect of PGPB on host physiology using proteomic approaches. https://researchmatters.in/news/how-does-bacteria-help-plants-thrive-salty-conditions.

Environmental Microbiology

Owing to their high chemical and thermal stability, commercial mixtures of PCBs were widely used in various industrial applications such as lubricants, plasticizers, dielectric fluids, hydraulic fluids in compressors and flame retardants. Although PCBs are no longer in use, but because of their extreme toxicity and persistence, they are still found as contaminants in the natural environments due to their past usage and continued to pose potential threats to human health. These compounds tend to resist biodegradation and persist in environment by attaching strongly to soil sediments and matrices, bioaccumulate in organisms especially at higher trophic level and finally enter food chains. We are making an attempt to screen and characterize PCB-degrading bacteria, understand the mechanistic pathway of PCB degradation, and to formulate the bacterial inocula to eliminate PCB from polluted soil.

Pathogenicity of Enterobacter cloacae

*Interested candidates having government-funded fellowship (CSIR, DBT, DST-Inspire or similar fellowship) can contact.

Courses

2nd Sem 2022-23

Database Systems (On -Campus) -- Instructor In-charge
Information retrieval (On Campus) -- Attached Instructor
AI and ML Techniques for Cyber Security (WILP) -- Instructor In-charge

1st Sem 2022-23

Principles of Programming Languages (On campus)
Object oriented programming (On-Campus) -- Instructor In-charge

2nd Sem 2021-22

Blockchain Technology (WILP) -- Instructor In-charge
Database Systems (On -Campus) -- Instructor In-charge
Cyber Crimes, Forensics and Incident Handling (WILP) -- Instructor In-charge

1st Sem 2021-22

Blockchain Technology (Off Campus) -- Instructor In-charge
Principles of Programming Languages (On campus)
Object oriented programming (On-Campus) -- Instructor In-charge

2nd Sem 2020-21

Blockchain Technology (On Campus) -- Instructor In-charge
Database Systems (On Campus) -- Instructor In-charge
Database Design and Applications (WILP) -- Instructor In-charge

1st Sem 2020-21

Principles of Programming Languages (Attached Instructor)
Operating Systems (Tutorial)

2nd Sem 2019-20

Object oriented programming (On-Campus) -- Instructor In-charge
Database Design and Applications (WILP) -- Instructor In-charge

1st Sem 2019-20

Principles of Programming Language --Attached Instructor
Advanced Operating Systems -- Instructor In-charge

2nd Sem 2018-19

Database Management Systems --Attached Instructor & Lab
Computer Networks (WILP) -- Instructor In-charge

1st Sem 2018-19

Advanced Operating Systems -- Instructor In-charge
Principles of Programming Language --Attached Instructor

2nd Sem 2017-18

Design and analysis of algorithm -- Tutorial
Computer Networks (WILP) -- Instructor In-charge

1st Sem 2017-18

Advanced Operating Systems -- Instructor In-charge
Operating Systems --Tutorial

2nd sem 2016-17

Computer Networks -- Lab
Computer Programming -- (Attached Instructor)

1st sem 2016-17

Cloud Computing -- Lab
Advanced Operating System -- Lab

Courses

2022-23 (2) Jan-May

BITS-F425: Deep Learning [IC] link
Special Courses (F266, F366, F376, F422, F491)

2022-23 (1) Aug-Dec

BITS-F425: Deep Learning [IC] link
IS-ZC444: Artificial Intelligence [IC] (PG Course) link
Special Courses (F266, F366, F376, F422, F491)

2021-22 (2) Jan-May

BITS-F425: Deep Learning [IC] link
SEZG-522: Big Data Systems [IC] (PG Course) link
BITS-F452: Blockchain Technology
Special Courses (F266, F366, F376, F422, F491)

2021-22 (1) Aug-Dec

BITS-F425: Deep Learning [IC] link
SS-ZG548: Advanced Data Mining [IC] (PG Course) link
Special Courses (F266, F366, F376, F422, F491)

2020-21 (2) Jan-May

BITS-F464: Machine Learning [IC]
CS-F364: Design and Analysis of Algorithms [Co-IC]
Special Courses (F266, F366, F376, F422, F491)

Unique Courses

BITS-F425: Deep Learning [IC]
BITS-F464: Machine Learning [IC]
IS-ZC444: Artificial Intelligence [IC] (PG Course)
SEZG-522: Big Data Systems [IC] (PG Course)
BITS-F452: Blockchain Technology
SS-ZG548: Advanced Data Mining [IC] (PG Course)
CS-F364: Design and Analysis of Algorithms [Co-IC]
CS-F441: Deep Learning for NLP and Vision [Co-Instructor]
CS/IS-F214: Logic in Computer Science [Tutorial]
CS-F441: Cognitive Computing [Co-IC]
CS-G526: Advanced Algorithm and Complexity [IC] (PG Course)
CS-G623: Advanced Operating System [IC] (PG Course)
Certification Course WILP: AI/ML [Module-6 and capstone Proj]
Special Courses (F266, F366, F376, F422, F491)

Session	Jul-Dec	Jan-Apr	May-Jul
2015-16			Adv-Algo, Adv-OS, BITSET
2016-17	ADM, LogicInCS, Spl	ML, DAA, CogComputing, Spl	PS-1 at Delhi
2017-18	ADM, LogicInCS, Spl	ML, ADM, Spl	PS-1 at Lucknow
2018-19	AI, ML, Spl	ADM, ML-Lab, Spl	PS-1 at Nagda
2019-20	ADM, DL-4CV, Spl	ADM, DAA, wilp-AIML, Spl	PS-1 online at Goa, Kolkata, Gandhinagar, Banglore
2020-21	AI, ML, Spl	DAA, ML Spl	PS-1 - ONLINE - three centers
2021-22	ADM, Deep Learning, Spl	BDS, Deep Learning, Blockchain, Spl	PS-1 - ONLINE - two centers
2022-23	AI, Deep Learning, Spl	Deep Learning, Spl

Courses

Computer Programming
Data Structures and Algorithms
Discrete Structures for Computer Science
Computer Graphics
Multimedia Computing
Theory of Computation
Logic in Computer Science (Tutorial)
Operating System (Tutorial)

UG Level

Airport, Railways and Waterways Engineering. Engineering Graphics; Highway Engineering Laboratory.

PG Level

Transportation Systems Planning and Management, Traffic Engineering and Safety, Transportation Economics and Finance, Urban Mass Transit Planning, Operations and Management

Teaching

Prateek teaches humanities courses at BITS Pilani. He has significant experience in teaching literatures in English at colleges under the University of Delhi between 2007 and 2013. He held a teaching assistantship at the Centre for English Studies, Jawaharlal Nehru University between 2006 and 2007 and South Asian Council, Yale University between 2010 and 2011. He worked at the University of Queensland between 2017 and 2018 as a drama tutor. In Feb 2018, he also interned as Assistant Artistic Director at Queensland Shakespeare Ensemble, Queensland, Australia during the production of Shorts, a skit based on the condensed version of three Shakespeare plays. Between 2018 and 2020, Prateek taught courses on World Literature and Modern Indian Theatre at SRM University, Amaravati. While researching at Northwestern University between 2021 and 2022 as a postdoctoral Fulbright fellow, he delivered class lectures for theatre courses. Moreover, he has written and directed a number of theatre productions.

Teaching

CHEM F111: General Chemistry

CHEM F313: Instrumental Methods of Analysis

BITS F111: Thermodynamics

CHEM F341: Chemical Experimentation II

CHEM F211: Physical Chemistry I

Courses

Courses (First Sem 24-25)

Embedded System Design (as IC)- PG, Disciplinary elective for UG
Machine Learning for Electronics Engineers (as IC)-PG, Disciplinary elective for UG
Reconfigurable Computing (as IC) -PG, Disciplinary elective for UG

Courses taught in the last two semesters

Embedded System Design (as IC)
Machine Learning for Electronics Engineers (as IC)
Networked Embedded Applications (as IC)
Software for Embedded Systems (as IC)
Reconfigurable Computing

Courses taught Previously

Embedded System Design (as IC)
Real Time Systems (IC)
Networked Embedded Applications (as IC)
Software for Embedded Systems (as IC)
Microprocessor Programming and Interfacing
Post Graduate Programme in Internet of Things
Hardware Architectures for IoT
Sensors Actuators and Signal Processing

Work Integrated Learning Programmes

Embedded System Design (as IC)
Networked Embedded Applications ( as IC)
Post Graduate Programme in Internet of Things
IoT Technology and Applications
Hardware Architectures for IoT
Sensors Actuators and Signal Processing

Courses Currently Teaching / Previously Taught

On-Campus Courses

Machine Learning [BITS F464]
Foundations of Data Science [CS F320]
Computer Programming [CS F111]
Microprocessor programming & Interfacing [EEE/CS/ECE/INSTR F241]
Computer Architecture [CS F241]

Off-Campus Courses (WILP)

Network Security [CSI/ES/SS ZG513]

Teaching Interest

Teaching Interest:

Financial Engineering
Computational Finance
Market Microstructure
Financial Risk Management

Courses Taught

On-Campus Courses

Theory of Computation [CS F351]
Compiler Construction [CS F363]
Cryptography [BITS F463]
Software Engineering and Management [SS G562]

Off-Campus Courses (WILP)

Database System and Applications (ISZC337/SSZC337)
Compiler Design (IS ZC373)
Software Engineering (IS ZC343)

Teaching

II Semester 2023-24:

Advanced Concrete Technology
Construction and Planning Technology

I Semester 2023-24:

Civil Engineering Materials
Civil Engineering Materials Lab

II Semester 2022-23:

Construction and Planning Technology
Engineering Graphics

I Semester 2022-23:

Civil Engineering Materials
Civil Engineering Materials Lab

II Semester 2021-22:

Construction and Planning Technology
Engineering Graphics

I Semester 2021-22:

Civil Engineering Materials
Engineering Graphics

II Semester 2020-21:

Construction and Planning Technology
Advanced Concrete Technology

I Semester 2020-21:

Civil Engineering Materials
Pavement Materials Characterization

II Semester 2019-20:

Construction and Planning Technology
Environmental Statistics

I Semester 2019-20:

Civil Engineering Materials
Advanced Concrete Technology

II Semester 2018-19:

Advanced Concrete Technology
Construction and Planning Technology
Highway Engineering Laboratory

I Semester 2018-19:

Construction Materials
Civil Engineering Materials
Construction Management

Courses taught previously:

An Introduction to Engineering and Practices (NTU, Singapore)
Environmental Engineering Lab B (NTU, Singapore)
Engineering Graphics (BITS-Pilani)
Design of Concrete Structures Lab (BITS-Pilani)

Teaching

Pharmaceutical Analysis (Core)

Pharmaceutical Chemistry (Core)

Retrosynthetic Analysis (Elective)

Pharmaceutical Process Chemistry (Elective)

Pharmaceutical Chemistry (WILP)

Academic Experience

Teaching and Research Experience:

Designation	Duration	Organisation
Professor	February 2013 – Continue	BITS Pilani
Associate Professor	August 2010 – January 2013	BITS Pilani
Assistant Professor	May 2002 – July 2010	BITS Pilani
Visiting Faculty	December 2000- May 2002	IIT Kanpur
Senior Lecturer	March 1999-December 2000	Tezpur University Central
Lecturer	March 1995 - March 1999	Tezpur University Central
Research Associate	October 1994 - February 1995	IIT Kanpur
Research Scholar	July 1990 – October 1994	IIT Kanpur

Courses Taught:

Courses taught at U. G./P.G. level (at BITS Pilani): Advanced Calculus, Linear Algebra, Complex Analysis, Differential Equations, Numerical Analysis, Probability and Statistics, Measure and Integration, Functional Analysis, Ordinary Differential Equations, Mathematical Modelling.
Courses taught at U.G. level ( at IIT Kanpur): Advanced Calculus, Linear Algebra, Complex Analysis, Ordinary Differential Equations, Partial Differential Equations.
Courses taught at P.G. level (at Tezpur University): Differential Equations, Numerical Solutions of Differential Equations, Quantitative Techniques, Business Mathematics, Linear Algebra, Measure Theory and Integration, Functional Analysis, Abstract Algebra.

Courses (Teaching every semester)-

Credit Type-

Appreciation of Indian Music

Musicology-An-Introduction

Audit Type-

Indian Classical Music (Inst)-I.

Music N114T Indian Classical Music (Inst)-II.

Project Type Courses: (Teaching Every Semester)-

Study Oriened Project

Lab Oriented Project

Computer Oriented Project

Design Oriented Project

Courses

BIO F111 General Biology

BIO F214 Integrated Biology

BIO F451 Bioprocess Technology

BIO F342 Immunology

BIO F215 Biophysics

BIO G651 Protein and Enzyme Bioengineering (Lectures and Practical)

WILP SANG 512 Sanitation and Public Health-Served as Instructor In-charge

WILP- BIOCON Certificate course-Served as Instructor

Practice School-2022 Station-Yashoda

Young Entrepreneur Bootcamp 2022 at BITS-Pilani Hyderabad

Courses in Current Semester (I-Sem, 2024-25)

Mathematics-1 (MATH F111)
Mathematics-3 (MATH F211)

Courses Taught Earlier

CDC:

Introduction to Topology
Measure and Integration
Numerical Analysis
Discrete Structure for Computer Science
Graphs and Networks

Foundational Courses:

Mathematics-1 (Calculus)
Mathematics-2 (Linear Algebra and Complex Analysis)
Mathematics-3 (Differential Equations)
Probability and Statistics

Discipline Electives:

Discrete Mathematical Structures

Other:

General Mathematics-2 (Foundational Course for B.Farm Students)

First Degree Thesis

"Applications of RNN in Portfolio Construction" submitted by Nikita Singh (2016B4A70509P) in I Semester, 2020-21.
"Applications of Fractional Calculus in Neural Networks" submitted by Bhavesh Navandar (2014B4A10648P) in II Semester, 2019-20.
Co-supervised "2D Shape Registration and Comparison in Image Analysis" submitted by Vighnesh Hegade (2015B4A70342P) in I Semester, 2019-20. (Supervisor: Dr. Martin Herman, Senior advisor for forensics and IT, National Institute of Standards and Technology, U.S. Department of Commerce)
Co-supervised "Application of discrete mathematics to develop methods for footwear impression comparison" submitted by Akul Sareen (2013B4A7743P) in II Semester, 2017-18. (Supervisor: Dr. Martin Herman, Senior advisor for forensics and IT, National Institute of Standards and Technology, U.S. Department of Commerce)
Co-supervised "Finding {p, p} - equivelar maps on small number of vertices" submitted by Shubham Sharma(2013B4A8703P) in II Semester, 2017-18. (Supervisor: Prof. Basudeb Datta, Department of Mathematics, Indian Institute of Science, Bangalore)
"Application of Fractional Calculus in PID Controllers" submitted by Mr Mohit Saluja (2012B4A3642P) in I Semester 2016-17.
"Application of Fractional Calculus to Rainfall-Sreamflow Modelling" submitted by Ms Vasundhara Sharma (2010B4A2719P) in I Semester 2014-15.
"Univalent functions in the dynamics of viscous flows with the discussion of Hele-Shaw problem"; submitted by Mr Kaustubh Sakhalkar (2009B4A4695P) in I Semester 2013-14.
Co-supervised "SHG’s – A tool to empower women in India"; submitted by Ms Manisha Rana (2009B4A7596P) in I Semester 2013-14. (Supervisor Dr Pushplata)
"Supply Chain Risk Assessment using Fuzzy Logic"; submitted by Mr Vinay Dwivedi (2007B4A8700P) in II Semester 2011-12.

Study Projects

"Pose Estimation with CNNs: Exploring Omnidirectional Images" submitted by Rachit Gandhi (2020B4A81440P) in I semester 2023-24.
"Finding the Fractional Order for Predicting the Air Quality Index using Fractional Gradient-based Neural Networks" submitted by Divyanshu Singh (2020B4A3647P) in I semester 2023-24.
"Supply Chain Implementation Framework" submitted by Uday Mittal (2019B4A70662P) in I semester 2022-23.
"Study of an Integrated DEA Model with AI" submitted by Deepankar Bansal (2021B4A71070P) in I semester 2022-23.
"Fractional Ordered Neural Networks in Stock Market Analysis" submitted by Nanavaty Akash Anish (2021B4A72322P) and Sahil Mehta (2021B4A71078P) in I semester 2022-23.
"Predicting levels of different gases in the atmosphere to improve Air Quality Index using Fractional Gradient-based Neural Networks of different cities" submitted by Divyanshu Singh (2020B4A3647P) in II semester 2021-22.
"Study on Fractional Calculus Based Neural Networks" submitted by Ayush Kumar (2019B4TS1266P) in I semester 2021-22.
"Discrete Fractional Calculus" submitted by Vighnesh Hegade (2015B4A70342P) in I Semester 2018-19.
"A Study of DEA with Neural Networks" submitted by Arjun Gupta (2014B4A30754P) in II Semester 2017-18.
"Geometric Methods for Digital Image Processing" submitted by Sahil Singhal (2014B4A40555P) in I Semester 2017-18.
"Topological Data Analysis" submitted by Akul Sareen (2013B4A7743P) and Shubham Sharma(2013B4A8703P) in I Semester 2016-17.
"Introduction To Analytical Number Theory" submitted by Ananya Banerjee (2013B4TS958P) in II Semester 2015-16.
"A Study of Subordination Properties of Univalent Functions" submitted by Ilashree (2012B4A7138P) in I Semester 2015-16.
"Fractional Calculus" submitted by Himanshu Garg (2012B4TS698P) in I Semester 2015-16.
"Study of Fractional Taylor Series" submitted by Shubhangi Sikaria (2012B4TS984P) in II Semester 2014-15.
"Study of univalent function theory" submitted by Aniruddha Ghosh (2011B4A4199P) in I Semester 2014-15.
"Study of Graph Algorithms"; submitted by Pranjal Jain (2010B2A4799P) and Rahul Chandnani (2010B3A4617P) in II semester 2013-14.
"Study of advanced topic in Graph Theory"; submitted by Shobhit Trehan (2010B2A7757P) and Vipul Aggarwal (2010B4A3500P) in II semester 2013-14.
"Labelled Graph and their application in online social networks"; submitted by Ankit Maharia (2010B4A7723P) and Aayush Agarwal (2010B4A7710P) in II semester 2013-14.
"Study of everywhere continuous but nowhere differentiable functions using fractional calculus"; submitted by Vasundhara Sharma (2010B4A2719P) in II semester 2012-13.
"Applications of Topology in Engineering"; submitted by Aatman Vora (2009B4A4572P) and Udbhav Prasad (2009B4A7523P) in II Semester 2011-12.
"Application of Fractional Calculus in the study of Fractal Functions"; submitted by Harsh Chhatwani (2009B4A7619P) and P. Ravi Teja (2009B4A7645P) in II Semester 2011-12.
"A study of some Generalized Star-like and Convex Functions"; submitted by Vinay Kumar B.R. (2009B4A3371P) and Kaustubh Sakhalkar (2009B4A4695P) in II Semester 2011-12.
"Study of Fractals using Fractional Calculus"; submitted by Sarthak Das (2006B4A7549P) and Rakul Viswanath (2006B4A8450P) in II Semester 2009-10.

Courses Taught

Optimization (AAOC C222/ MATH F212)
Operations Research (AAOC C312)
Probability and Statistics (AAOC C111/MATH F113)
Fuzzy Logic and Applications (EA C482/ BITS F343)
Differential Equations (MATH F211)
Linear Algebra and Complex Analysis (MATH F112).

Student Projects

K Motheesh (2014B4AB0588P), Supply Chain Performance Evaluation using DEA, IInd semester 2018-19.
Vrinda Poddar (2014B4A70802P), Network Optimization, Ist semester 2018-19.
Arjun Gupta (2014B4A30754P), Vision-Based Autonomous Driving, Ist semester 2018-19 (as Co-supervisor).
Atharv Gupta (2013B4A30781P), Supply Chain of Jaipur Rugs, IInd semester 2017-18.
Shubham Choudhari (2013B4A40471P), Inventory Management in Multi-level Supply Chain, IInd semester 2017-18.
Salil Bhandari (2013B4A80796P), Optimisation of Multi-Level Supply Chain Management with Focus on Capacity Planning and Revenue Management, IInd semester 2017-18.
Akshat Khandelwal (2012B4A4623P), Implementation of Fuzzy Supply Chain Management, Ist semester 2016-17.
Pankhuri Kumar (2012B4A7662P), Application of Genetic Algorithm in Fuzzy Systems, Ist semester 2016-17.
Ayush Jain (2012B4A4739P), Application of Fuzzy in Supply Chain Management, Ist semester 2016-17.
Sanchit Samnani (2012B4A4610P), An Application of Fuzzy TOPSIS, Ist semester 2016-17.
Mehak (2012B4A8666P), Fuzzy Data Envelopment Analysis (DEA), Ist semester 2016-17.
Arpit Bhutani (2011B4A1712P), Application of DEA in Education Sector, Ist semester 2015-16.
Saurabh Gupta ((2011B4A1642P), Application of DEA in Supply Chain Management, Ist semester 2015-16.
Mantinder Jit Singh (2011B4A8699P), Parametric and Statistical Estimation for the Prediction of Load at Demand side, Ist semester 2015-16 (as Co-supervisor).
Agam Kapoor (2010B2A7793P), Applications of Artificial Neural Networks, IInd semester 2014-15.
Deepak D. (2010B4A4615P), Hybrid Intelligent Algorithm, IInd semester 2014-15.
Divya Jangir (2011B4TS297P), Application of Data Envelopment Analysis with Undesirable and Desirable Outputs in Real Life, IInd semester 2014-15.
Harsh Sharma (2011B4TS707P), Inventory Overstocking in Automobile Industry, IInd semester 2014-15 (as Co-supervisor).
Ankit Maharia (2010B4A7723P), Fuzzy Logic Based Image Processing, Ist semester 2014-15.
Nishank Varshney (2009B4A8698P), Mathematical Modelling for Allocating Budget in Universities , IInd semester 2013-14.
Nishank Varshney (2009B4A8698P), Empirical Assessment of Right to Education Act, Ist semester 2013-14 (as Co-supervisor).
Pranshu Gupta (2008B3A8561), Fuzzy Optimization, IInd semester, 2012-2013.
Jai Awasthi (2008B4A7563), Fraud Risk Assessment using Fuzzy Logic, Ist semester, 2012-13.
Abhishek Jagetiya (2007B4A7543), Importance of fuzziness in Artificial Intelligence, IInd semester, 2011-12.

HD & FD Courses

HD Courses

Academic/Research Writing for Doctoral Students
Technical Communication (BITS F437)

FD Courses

English Skills for Academics (HSS F224)
Technical Report Writing (WILP/ PEZC 312 & TEZC 312)
Language Lab Practice (GS F 222)
Technical Report Writing (BITS F112)

SOP/DOP/LOP Projects

First Semester 2019-2020

1. Keshav Beriwal (ID: 2017B4A71301H)

Project Title: Mathematical Modeling of Wave Energy Converter Devices (Oyster) in Real Sea Conditions

2. Prakhar Suryavansh (ID: 2017B4A71017H)

Project Title: Mathematical Modeling of Wave Energy Converter Devices (Oyster) in Real Sea Conditions

3. Shivali Ratra (ID: 2017B4A71707H)

Project Title: Oscillating Water Column Devices - Wave Energy Converters

Second Semester 2019-2020

1. C Mohan (ID: 2017A3PS0330H)

Project Title: Hydrodynamics of the Oscillating Wave Surge Converter

2. Sajith K (ID: 2017B4A71012H)

Project Title: Oscillating Water Column

3. Saaransh Garg (ID: 2017B4A81577H)

Project Title: Fixed Structure Oscillating Water Column

4. Sanchet S Katakol (ID: 2017B4AA0945H)

Project Title: IPS Buoy WEC Device

First Semester 2020-2021

1. Isha Gohel (ID: 2018B4A70454H)

2. Srirampur Shreya (ID: 2018B4A70886H)

Project Title: Non-Linear Stochasticanalysis of a U-shaped Duct Oscillating Water ColumnWave Energy Converter Device Under Irregular Incident Waves

3. Aswath Vinayak K (ID: 2018B4A70713H)

4. Divyani Srivatsava (ID: 2018B4A71050H)

5. Aparna Bushwar (ID: 2018B4A70857H)

6. Geet Sahitya Dulam (ID: 2018B4A70797H)

Project Title: Stochastic Modelling of Ocean Waves

Second Semester 2020-2021

1. Bathini Tharun Kumar Reddy (ID: 2018B4AA1077H)

2. Pathi Prudhvi (ID: 2018B4A80147H)

3. Khushi Khanna (ID: 2019B4A10850H)

4. Hareesh Uppada (ID: 2019A4PS0913H)

5. Guru Sudhan M (ID: 2017B4A40967H)

Project Title: Stochastic Modelling of Wave Energy Converter Devices

First Semester 2021-2022

1. Rahul Ranjan (ID: 2018B4A80086H)

2. S Prudhvi Raj Datta (ID: 2019B4A41061H)

Project Title: Non-linear stochastic analysis of a U-shaped duct OWC WEC under irregular incident waves

3. Burugupally Kaushik (ID: 2019B4A70785H)

4. A V Praneeth Reddy (ID: 2019B4A40751H)

Project Title: Stochastic modelling of OWC devices

5. Rohit Sethi (ID: 2018B4A70611H)

6. Satviki Sharma (ID: 2018AAPS1241H)

7. Pranavi Gunda (ID: 2019B4A71068H)

8. Vidhani Hiten Jitendra (ID: 2019B4A70812H)

Project Title: Estimation of parameters of various probability distributions

Second Semester 2021-2022

1. Aakanksha Bharadwaj (ID: 2018B4AA0406H)

Project Title: Fast Fourier Transforms for Signal Processing

2. Aparna Bushwar (ID: 2018B4A70857H)

Project Title: Fast Fourier Transform (Stochastic Modelling using Data Analysis)

3. Vidhani Hiten Jitendra (ID: 2019B4A70812H)

4. Chirag Shah (ID: 2020B4A72000H)

5. Jasnoor Kalsi (ID: 2020B4A72522H)

Project Title: Fast Fourier Transform for Signal Processing

6. Khushi Gupta (ID: 2019B4A40836H)

Project Title: Fast Fourier Transform for Signal Processing

Second Semester 2022-2023

1. Pushpam Singh (ID: 2019B4A71272H)

2. Karan Moza (ID: 2019B4A71372H)

Project Title: ANN and Taguchi Method based optimization for WEC

3. Akshat Singh (ID: 2019B4AA0842H)

Project Title: ANN based optimization for WEC

4. Visweswar Sirish Parupudi (ID: 2020AAPS0330H)

5. Harshil Kankane (ID: 2020B4A72230H)

Project Title: ANN and Taguchi method based optimization for WEC device

6. Vishva Desai (ID: 2020B4A71635H)

7. Kanagarla Kushal Anurag (ID: 2020B4A72168H)

Project Title: ANN and Taguchi method based optimization for WEC device

8. Krishna Rathore (ID: 2019B4AA0832H)

Project Title: ANN and Taguchi method based optimization for WEC device

FD Thesis

First Degree Thesis

1. Hardik Bhalla (ID: 2018B4A30263H): Recommendation Systems using Deep Learning (First Semester 2022-2023)

1. Ashish Verma (ID: 2018B4A40780H): Price forecast of financial securities by using ARIMA model in Programming (Second Semester 2022-2023)

To be updated soon.

Subjects taught

Under Graduate Level

Applications of Artificial Intelligence in Civil Engineering
Geographical Information System
Construction Planning and Technology
Water and Waste Water Treatment
Hydraulics and Fluid Mechanics
Hydraulics Engineering
Analysis of Structures
Analysis and Design of Structures I
Analysis and Design of Structures II
Mechanics of Solid
Engineering Graphics
Measurement Techniques II
Transport Phenomena I
Transport Phenomena II
Soil Mechanics and Foundation Engineering
Introduction to Systems
Systems: Modeling and Analysis
Computer Aided Design
Civil Engineering Labs
Fluid and Solid Mechanics
Practice School
Green Building & Energy Conservation
Operation Research for Engineers
Principles of Remote Sensing and Image Processsing

Post Graduate Level

Theory of Elasticity and Plasticity
Advanced Soil Mechanics
Fundamental of System Engineering
Earthquake Engineering
Epidemic & Disaster Management
Computer Aided Analysis and Design
Infrastructure Planning and Management
Construction Management

Research Interests

Fluid Structure Interaction
Construction Planning and Management
GIS & Remote sensing
Passive solar Architecture
Concrete Technology
Soft computing: ANN, GA, Fuzzy Logic
Rainwater Harvesting

Teaching

Transducers and Measurement Techniques (INSTR F312)
Electrical Sciences (EEE F111)

Industrial Instrumentation and Control (INSTR F343)
Microprocessor Programming and Interfacing (EEE/INSTR/ECE/CS F241)
Control System (EEE/INSTR/ECE F245)

RESEARCH FELLOWSHIPS / AWARDS

UGC (NET) 1985 as JRF
CSIR as JRF 1986
CSIR as SRF 1988
Research Associate ship (UGC) 1993
Research Associate ship in CAS Dept. of Physics B.H.U.,Varanasi
Fellow, Institution of Electronics and Telecommunication Engineers ( IETE), New Delhi
Senior Member , IEEE
Life Member Metrology Society of India

Courses

Current Semester

Nanoelectronics and Nanophotonic Technology
Optical Communication

Earlier Semester

Basic Sciences

General Physics

Electricity & Magnetism

Modern Physics

Basic Engineering

Thermodynamics

Structure & Properties of materials

Electronics

Circuit Theory

Electrical Science-I

Specialized Engineering

Analog Electronics

Fiber optics & Optoelectronics

Microelectronic circuits

Communication Systems

Electronic Devices & Integrated Circuits

Mobile Telecommunication Networks

Optoelectronics Devices Circuits & systems

Optical Communications

Wireless & personal communication

Physics and modeling of Microelectronic Devices

Modeling of Field Effect Nano devices

Nanoelectronics & nanophotonic Technology

Courses

Courses in Current Semester :

Mechanics Oscillations and Waves
Electromagnetic Theory II

Courses Taught :

Physics

Modern Physics
Classical Mechanics
Electromagnetic Theory I
Electromagnetic Theory II
Quantum Mechanics I
Quantum Mechanics II
Mathematical Methods of Physics
Optical Physics and Applications
Atomic and Molecular Spectroscopy
Theory of Relativity
Group Theory and its Applications
Particle Physics
Measurements Techniques

Interdisciplinary

Coding Theory and Applications
Image Processing
Computer Graphics

Teaching

Introduction to Psychology

Science of Sustainable Happiness

Work Integrated Learning Programmes

Bachelor of Science in Computer Science
- BCS ZC312 Introduction to Data Analytics
M.Tech. Software Systems
- SS ZG628T: Dissertation
MTech. in Software Engineering
- BITS ZG628T: Dissertation

Graduate Courses

CS G520 Advanced Data Mining
BITS G527 Data Sciences II

Graduate Courses

Undergraduate Courses

CS F425 Deep Learning
CS F407 Artificial Intelligence
BITS F232 Foundations of Data Structures and Algorithms
CS F213 Object Oriented Programming
CS F111 Computer Programming

Undergraduate Courses

Teaching

Teach courses in International Relations, Political Science, and Policy Studies. The specific course titles are as follows: International Relations, Modern Political Concepts, Public Policy, and Chinese Politics.

Courses Taught to Undergraduate and Ph.D Students

Distinct courses handled and taught as Instructor-in charge and Instructor, since 2009-to till date for Undergraduates and Higher degree students.

10 courses (Lectures and Tutorials) and 8 Laboratory courses (Practicals) for Undergraduates

7 Courses for Ph.D students

Teaching Courses:

2009-2010

First Semester: CHEM C 141 (Physical Chemistry), TA C211 (Measurement Techniques 1 Lab)

Second Semester: CHEM C142 (Organic Chemistry), ES_C242 (Structure and Properties of Materials), TA C211 (Measurement Techniques 1 Lab)

2010-2011

First Semester: CHEM C 141 (Physical Chemistry), TA C211 (Measurement Techniques 1 Lab)

2011-2012

First Semester: CHEM F111(General Chemistry, TS 2,3), TA C211 (Measurement Techniques 1(Lab PS 12) CHEM C321 (Chemical Thermodynamics)

Second Semester: CHEM F110 (Chemistry Laboratory, PS 6, 9 and 12), CHEM C231 (Chemistry Project Lab, IC, Sec 1)

2012-2013

First Semester: CHEM C321(Chemical Thermodynamics, IC, Sec1), CHEM F110 (Chemistry Laboratory, PS 6), CHEM C231 (Chemistry Project Lab)

Second Semester: CHEM F110 (Chemistry Laboratory, PS 1, 2), CHEM F361 (Polymer Chemistry, IC Sec 1)

2013-2014

First Semester: CHEM F111(General Chemistry IC, Lec, TS1), CHEM F110 (Chemistry Laboratory, PS 3)

Second Semester: CHEM F110 (Chemistry Laboratory, IC, PS 3, 6), CHEM F111(General Chemistry, TS3), Laboratory Project (CHEM F366/367, IC)

2014-2015

First Semester: CHEM F111(General Chemistry TS7), CHEM F110 (Chemistry Laboratory, PS 4,7)

Second Semester: CHEM F341 (Chemical Experimentation Laboratory II, IC, PS1), CHEM F325 (Polymer Chemistry, IC, Lec)

2015-2016
First Semester: CHEM F313(Instrumental Methods of Analysis, IC, Lec, lab), CHEM F110 (Chemistry Laboratory, PS 7), MST F331 (Materials Characterization, Lec, TS 1)
Second Semester: CHEM F341 (Chemical Experimentation Laboratory II, PS1), CHEM F110 (Chemistry Laboratory, PS 6), CHEM F414 (Bio and Chem Sensors, IC, Lec)

2016-2017

First Semester: CHEM F111(General Chemistry TS4), CHEM F110 (Chemistry Laboratory, IC, PS 2,PS 5, PS 7)

Second Semester: CHEM F414 (Bio and Chem Sensors, IC, Lec and Lab), CHEM F110 (Chemistry Laboratory, PS 2, PS4

2017-2018

First Semester: Research Methodology (BITS E 661, Lect), Advanced Physical Chemistry (CHEM G553) General Chemistry (CHEM F111, TS6), CHEM F313(Instrumental Methods of Analysis, Lec, lab)
Second Semester: General Chemistry (CHEM F111, TS 7), CHEM F110 (Chemistry Laboratory, PS4), CHEM G 531 (Recent Advances in Chemistry, IC, Lec), CHEM F414 (Bio and Chem Sensors, IC, Lec)

2018-2019

First Semester: CHEM F325 (Polymer Chemistry, Lect, Lab), CHEM F111 (General Chemistry, TS 2), CHEM G553 (Advanced Physical Chemistry, IC, Lect), CHEM G531 (Recent Advances in Chemistry, IC, Lect)

Second Semester: CHEM F414 (Bio and Chem Sensors, IC, Lec), CHEM F110 (Chemistry Laboratory, PS4, PS 12), CHEM G 531 (Recent Advances in Chemistry, IC, Lec), CHEM F266 (Study Project, IC)

2019-2020

First Semester: CHEM F325 (Polymer Chemistry, Lect, Lab), CHEM F111 (General Chemistry, TS 9), CHEM F110 (Chemistry Laboratory, PS4)

Second Semester: CHEM F414 (Bio and Chem Sensors, IC, Lec), CHEM F110 (Chemistry Laboratory, PS10, PS11)

2020-2021

First Semester: CHEM F111 (General Chemistry, Lectures, TS 3), CHEM F325 (Polymer Chemistry, Lect, Lab), CHEM F110 (Chemistry Laboratory, PS3, PS10)

Second Semester: CHEM F414 (Bio and Chem Sensors, IC, Lec, Lab), CHEM F111 (General Chemistry, Lectures, TS 2), CHEM F110 (Chemistry Laboratory, PS 5)

2021-2022

First Semester: CHEM F313(Instrumental Methods of Analysis, IC, Lec, lab), CHEM F110 (Chemistry Laboratory, PS16), CHEM G553 (Advanced Physical Chemistry, IC, Lect), BITS G513 (Study in Advanced Topics)

Second Semester: CHEM F414 (Bio and Chem Sensors, IC, Lec, Lab), CHEM G 531 (Recent Advances in Chemistry, IC, Lec), Laboratory Project (CHEM F 366/367, IC)

2022-2023

First Semester: CHEM F111 (General Chemistry, IC, Lectures, TS 1)

Second Semester: CHEM F414 (Bio and Chem Sensors, IC, Lectures, Lab components conducted for hands-on-experience to students); CHEM F110 (Chemistry Laboratory) PS 6

2023-2024

First Semester: CHEM F111 (General Chemistry, Lectures from August 12^th Till October 6^th, TS 10); CHEM F110 (Chemistry Laboratory) PS 8

Second Semester: CHEM F414 (Bio and Chem Sensors, IC, Lectures, Lab components for hands-on-experience to students); CHEM F110 (Chemistry Laboratory PS 10)

2024-2025

First Semester: CHEM F111 (General Chemistry, Lectures from August 7^th Till October 18^th, TS 2)

Laboratory Courses:

TAC 211- Measurement technique (MT1) Lab (2010, 2011)
CHEM C 231 -Chemistry Project Lab (2010, 2012)
CHEM F110- Chemistry Laboratory (2011, 2012, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023)
CHEMC361/ CHEM F325- Polymer Chemistry- Conducted labs (2013, 2014, 2018, 2020)
CHEM F341-Chemical Experimentation Laboratory (2015, 2016)
CHEM F313 (Lab): Instrumental methods of analysis (IC 2015, 2016, 2018, IC 2021)
CHEM F331(Lab): Materials Characterization: 2015
CHEM F414: Bio and Chemical Sensors: Conducted labs (2016, 2017, 2019,2020,2021,2022, 2023)
CHEM F366/367: Lab Oriented Project Course, IC 2022

Courses taught to Ph. D students:

Teaching Practice -Second semester 2011-2012
Research Methodology (BITS E661)- 2013
Research project 1 BITS G529 - First Semester 2012-2013
Physical Methods in Chemistry (CHEM G554)- 2015, 2016,2018
Advanced Physical Chemistry (CHEM G553)-Second Semester 2016-2017; First Semester 2018-2019; First Semester 2021-2022
Recent Advances in Chemistry (CHEM G531)-Second Semester 2017-2018; First Semester 2018-2019, Second Semester 2018-2019, Second Semester 2021-2022
Study in Advanced Topics (BITS G513)-Second Semester 2019-2020; First Semester 2021-2022; Second Semester 2022-2023
Polymer Chemistry (CHEM C361)-Second Semester 2013-2014
Reading Course (BITS G649)-Second Semester 2023-2024
Reading Course I (BITS E593)-Second Semester 2023-2024

Courses

CORE (CHEMISTRY)

U.G.

CHEMISTRY I
CHEMISTRY II
CHEMISTRY PROJECT LABORATORY,
MEASUREMENT TECHNIQUES
PHYSICAL CHEMISTRY( B.Sc. I , II AND III)
GENERAL CHEMISTRY
CHEMISTRY LABORATORY
THERMOPHYSICAL PROPERTIES OF LIQUID MIXTURES BITS F382.

WILP COURSE - ENVIRONMENTAL CHEMISTRY EE ZG511/SSTM ZG521
( M.TECH ENVIRONMENTAL ENGG.)

P.G.

CHEMICAL THERMODYNAMICS
NON EQUILIBRIUM (irreversible) THERMODYNAMICS
ELECTROLYSIS AND POLARIZATION
ELECTROLYTIC SOLUTIONS
INSTRUMENTATION METHODS OF ANALYSIS
PHYSICAL CHEMISTRY I (Redesigned Course)
STATISTICAL THERMODYNAMICS

INTERDISCIPLINARY (CHEMICAL ENGINEERING)

CHEMICAL REACTION ENGINEERING
CHEMICAL ENGINEERING THERMODYNAMICS
CHEMICAL PROCESS SAFETY
CORROSION ENGINEERING

MULTIDISCIPLINARY

STRUCTURE AND PROPERTIES OF MATERIALS
ENGINEERING THERMODYNAMICS.
INTELLECTUAL PROPERTY RIGHTS
ENVIRONMENTAL SCIENCE

Ph.D. COURSES

a. PHYSICAL METHODS IN CHEMISTRY.

b. RESEARCH PROJECT 1

c. STUDY IN ADVANCED TOPICS

d. ADVANCED PHYSICAL CHEMISTRY.

e. RESEARCH METHODOLOGY

INTERNATIONAL TEACHING ASSIGNMENT:

Awarded the Visiting Associate Professorship from National Taiwan University of Science and Technology (NTUST), Taipei, Taiwan, to teach a Graded course to M. Tech. Chemical Engineering and Ph. D. Scholars in the Summer of 2016( June-July)

Courses and Teaching

My Teaching Courses

Current:

ME/MF F318: Computer Aided Design

ME F314: Design of Machine Elements

AN F315: Aircraft Structures

ME G613: Advanced Finite Element Modelling & Analysis

ME F425;ET/MM ZC448; DM ZG631: Additive Manufacturing
MEF416: Reverse Engineering and Rapid Prototyping

DE/MM/AE ZG541: Product Design

Previously (not exhaustive):

AETT ZG622 Advanced Manufacturing Processes

TA C112: Workshop Practice
ME C342: Production Techniques
ME/MF F241: Machine Design and Drawing
ME G512: Finite Element Methods
ME G611: Computer Aided Analysis and Design
DE G512: Tribology
EA C415: Introduction to MEMS

Teaching: Experiential Learning

Experiential Learning Session in my Tutorial/Assignment Class of ME/MF F241: Machine Design and Drawing, a glimpse below:

Experiential learning is extremely essential. Specifically, in this course the students are taken through a weekly experiential learning routine in the tutorial/assignment class.

The experiential learning assignment involves a problem on machine component design fit for maximum 50 min (sometimes I found 50 min to be insufficient!). The assignment sheet requires each student enter his name and ID at the beginning of the session hence exchange is prohibited.
Prescribed textbook containing data tables, one’s own class notes, PPT slide printouts (no laptops!), calculator and any other printed material are permitted.
No more than 2 students are allowed to sit on each desk. Those two can discuss between themselves but may not discuss with anyone across. They can seek the help of the tutorial instructors any time.

Currently Teaching (Sem-1; 2024-25)

MATH F111: Mathematics 1 (Advanced Calculus)
MATH F211: Mathematics III (Differential Equations) [Instructor In-charge]

Courses Taught at BITS

MATH F111: Mathematics 1 (Advanced Calculus)
MATH F 112: Mathematics II (Linear Algebra and Complex Analysis)
MATH F211: Mathematics III (Differential Equations)
MATH F113: Probability and Statistics
MATH F215: Algebra-1
MATH F314: Algebra-II
BITS G513: Study in Advanced Topics (PhD Course)
BITS G529: Research Project 1 (PhD Course)
BITS G523: Reading Course (PhD Course)
BITS G539: Research Project II (PhD Course)

Courses

EEE G581 RF & Microwave Engineering

ECE F314 EM Fields and Microwave Engineering

ECE F312 EM Fields and Microwave Engineering Lab

EEE F474 Antenna Theory and Design

EEE G510 RF Microelectronics

EEE F111 Electrical Sciences

SS ZG520 Wireless and Mobile Communications (WILP)

EEE/ECE/INSTR/CS F241 Microprocessor Programming and Interfacing (Tutorial & Lab)

EEE/ECE F311 Communication Systems (Lecture)

Courses teaching in the current semester

MATH - III (offered by mathematics department)
Physics Lab

Courses Taught (offered by physics department)

Mathematical Methods of Physics
Classical Mechanics
Quantum Mechanics I
Statistical Mechanics
Theory of Relativity
Nuclear & Particle Physics
Particle Physics
Physics II (Electromagnetic theory)
Mechanics, Oscillations and Waves
Physics Lab

Courses Taught (offered by mathematics department)

Math I (Calculus)
Math II (Linear Algebra and Complex Variables)
Mathematics III (Differential Equations)

Courses taught (offered by WILP)

Engineering Mathematics - 1
Calculus

Courses

Fall 2024

Embedded System Design (Lecture + Lab)
FPGA Based System (Lab)

Spring 2024

Microprocessor and Interfacing (Lecture + Tutorial + Lab)

Fall 2023

Digital Design (Tutorial + Lab)
Reconfigurable Computing (Lab)

Courses

asfdhfg

Courses

Principles of Economics
Public Finance
Fundamentals of Finance and Accounting (Finance Part)
Derivatives and Risk Management
Financial Risk Analytics & Management
Investment Banking and Financial Services

Courses

2024-2025

Semester I

Mechanics, Oscillations and Waves

Physics Lab I

Courses

General Biology - BIO F111

Microbiology- BIO F212

Recombinant DNA Technology- BIO F311

Recent Developments in Biology- BIO G570

Environmental Studies (BITS F225)

Chemistry Laboratory (Chem F110)

General Chemistry (Chem F111)

Prior Teaching Experience

During my previous teaching experience at VIT Vellore, I taught process engineering thermodynamics, heat transfer, petroleum technology, petrochemical technology, fuels and combustion, mechanical operations, research publication and ethics, and material science and engineering.

Teaching

Teaching

ECON F341-Public Finance-Theory and Policy

ECON F211-Principles of Economics

BITS F314-Game Theory and its Application

ECON F214- Economic Environment of Business

Teaching Experience

General Biology (BIO F111)
Animal physiology (BIO F313)
Bioprocess Technology (BIO F451)
Environmental studies (BIO F225)
Biomedical Engineering (BITS F415)
Stem cells and Regenerative Biology (BIO G515)
Research Methodology (BITS E661)
Recent developments in biology (BIO G570)
Biology laboratory (BIO F110)
Instrumental Methods of Analysis (BIO F244)
Biosafety and Bioethics (BITS F467)
Study Project (BIO F266)
Laboratory Project (BIO F366)

Primary neuronal culture obtained by dissecting mice brain

This Semester:

Sem 2 2023-24

PHY F110 Physics Laboratory BITS F386 Quantum Information and Computation

Courses

Semiconductor Physics and Computational Methods (B. Tech.)
Modern Optics (B. Sc.)
Atomic and Molecular Physics (M. Sc.)

January - May 2024

CS F433 Computational Neuroscience, UG and PG students
CS F212 Laboratory: DBMS

August - December 2022

CS F320 Foundations of Data Science (Instructor-in-charge), 3rd and 4th Year UG
CS F213 Laboratory: Object Oriented Programming
BITS F382 Reading Course: Brain Inspired Deep Learning and Applications

January - May 2021

CS F320 Foundations of Data Science, 3rd and 4th Year UG
BITS F382 Reading Course: Computational Neuroscience (with Veeky Baths, Bio Sciences)

August - December 2019

CS F342 Computer Architecture, 3rd Year UG, (Instructor-in-charge)

August - December 2023

CS F320 Foundations of Data Science, 3rd and 4th yr UG
CS F215 Laboratory: Digital Design, 2nd yr UG

January - May 2022

CS F317 Reinforcement Learning (Instructor in-charge), 3rd and 4th Year UG
Laboratory CS F212: Database Management Systems
BITS F382 Reading Course: Brain Inspired Deep Learning and Application

August - December 2020

BITS F312 Neural Networks, 3rd and 4th Year UG
CS F342 Laboratory - Computer Architecture, 3rd Year UG

January - May 2019

BITS F312 Neural Networks, 3rd and 4th Year UG, Instructor-in-charge

January - May 2023

CS F433 Computational Neuroscience, UG and PG students
CS F212 Laboratory: DBMS

July - December 2021

MBA ZG536 / PDBA ZG536: Foundations of Data Science, Work Integrated Learning Programme (WILP)
CS F213 Laboratory: Object Oriented Programming
BITS F382 Reading Course: Brain Inspired Deep Learning and Applications

January - May 2020

BITS F312 Neural Networks, 3rd and 4th Year UG
CS F111 Laboratory - Computer Programming, 1st Year UG

Teaching Experience

Faculty Instructor

Autumn 2024: Computer Architecture (CS F342), BITS Pilani, Hyderabad
Autumn 2024: Advanced Operating Systems (CS G623), BITS Pilani, Hyderabad
Summer 2024: Operating Systems (CS F372), BITS Pilani, Hyderabad
Spring 2023-24: IoT Design Protocols (CSE 319A), SRM University-AP
Spring 2023-24: Data Structures Theory and Lab. (CSE/CSC 107/109), SRM University-AP
Autumn 2023-24: Computer Networks (CSE 303) and Lab. (CSE 303L), SRM University-AP
Autumn 2023-24: Service Oriented Computing (CSE 418) and Lab (CSE 418L), SRM University-AP
Spring 2022-23: Data Structures Theory (CSE 107/109) and Lab. (CSE 107L/109L), SRM University-AP

Teaching Assistant

Programming and Data Structures Theory (CS10001): Autumn 2018-19, IIT Kharagpur, India
Programming and Data Structures Lab. (CS19101): Autumn 2016-17 to Spring 2017-18 (4 semesters), IIT Kharagpur, India
Short-term Course on “Underwater Sensor Networks: Theory and Simulations”: April 2016, National Physical and Oceanography Laboratory (DRDO), Kochi, India

To be updated soon.

Teaching Courses

Instrumental Methods of Analysis (PHA F313)
Techniques in Pharma Analysis

Instrumental Methods of Analysis

Courses Taught after 2011

Courses taught in AY 2011-12, 1^st SEM	1	Natural Drugs (2hrs/wk lectures, 1 hr/wk tut)
	2	Dispensing Pharmacy (3 hr/wk lab)
	3	Computer Aided Drug Design (3 hrs/wk lectures)
	4	Clinical Research (3 hrs/wk lectures)
Courses taught in AY 2011-12, 2^nd SEM	1	Shrimad Bhagavad Gita (3 hrs/wk lectures)
	2	Computer Aided Drug Design (3 hrs/wk lectures)
	3	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses taught in AY 2012-13, 1^st SEM	1	Clinical Research (3 hrs/wk lectures)
	2	Shrimad Bhagavad Gita (3 hrs/wk lectures)
	3	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
Courses taught in AY 2012-13, 2^nd SEM	1	Pharmaceutical Chemistry (2 hrs/wk lectures, 1 hr/wk tut)
Courses taught in AY 2012-13, 2^nd SEM	2	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses taught in AY 2013-14, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
Courses taught in AY 2013-14, 1^st SEM	2	Clinical Research (3 hrs/wk lectures)
Courses taught in AY 2013-14, 2^nd SEM	1	Pharmaceutical Chemistry (2 hrs/wk lectures, 1 hr/wk tut, 3hr/wk lab)
Courses taught in AY 2013-14, 2^nd SEM	2	Advanced Medicinal Chemistry (3 hrs/wk lectures, 3hr/wk lab)
Courses taught in AY 2014-15, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
	2	Clinical Research (3 hrs/wk lectures)
	3	Pharmacoeconomics (3 hrs/wk lectures)
Courses taught in AY 2014-15, 2^nd SEM	1	Pharmaceutical Chemistry (2 hrs/wk lectures, 1 hr/wk tut)
Courses taught in AY 2014-15, 2^nd SEM	2	Advanced Medicinal Chemistry (3 hrs/wk lectures, 3hr/wk lab)
Courses taught in AY 2015-16, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
Courses taught in AY 2015-16, 1^st SEM	2	Clinical Research (3 hrs/wk lectures)
Courses taught in AY 2015-16, 2^nd SEM	1	Pharmaceutical Chemistry (2 hrs/wk lectures, 1 hr/wk tut)
Courses taught in AY 2015-16, 2^nd SEM	2	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses teaching in AY 2016-17, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
Courses teaching in AY 2016-17, 1^st SEM	2	Clinical Research (3 hrs/wk lectures)
Courses taught in AY 2016-17, 2^nd SEM	1	Pharmaceutical Chemistry (2 hrs/wk lectures, 1 hr/wk tut)
Courses taught in AY 2016-17, 2^nd SEM	2	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses taught in AY 2017-18, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
Courses taught in AY 2017-18, 1^st SEM	2	Clinical Research (3 hrs/wk lectures)
Courses taught in AY 2017-18, 2^nd SEM	1	Pharmaceutical Chemistry (2 hrs/wk lectures, 1 hr/wk tut)
Courses taught in AY 2017-18, 2^nd SEM	2	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses taught in AY 2018-19, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
Courses taught in AY 2018-19, 1^st SEM	2	Clinical Research (3 hrs/wk lectures)
Courses taught in AY 2018-19, 2^nd SEM	1	Pharmacoeconomics (3 hrs/wk lectures)
Courses taught in AY 2018-19, 2^nd SEM	2	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses taught in AY 2019-20, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
	2	Clinical Research (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)
Courses taught in AY 2019-20, 2^nd SEM	1	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses taught in AY 2019-20, 2^nd SEM	2	Intellectual Property Rights and Pharmaceuticals (3 hrs/wk lectures)
Courses taught in AY 2020-21, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
	2	Clinical Research (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)
Courses taught in AY 2020-21, 2^nd SEM	1	Advanced Medicinal Chemistry (3 hrs/wk lectures)
	2	Intellectual Property Rights and Pharmaceuticals (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)
Courses taught in AY 2021-22, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
	2	Clinical Research (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)
Courses taught in AY 2021-22, 2^nd SEM	1	Advanced Medicinal Chemistry (3 hrs/wk lectures)
Courses taught in AY 2021-22, 2^nd SEM	2	Intellectual Property Rights and Pharmaceuticals (3 hrs/wk lectures)
Courses taught in AY 2022-23, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
	2	Clinical Research (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)
	4	Pharmaceutical Chemistry (WILP course for CIPLA)
Courses taught in AY 2022-23, 2^nd SEM	1	Advanced Medicinal Chemistry (3 hrs/wk lectures)
	2	Intellectual Property Rights and Pharmaceuticals (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)
	4	Techniques in Pharmaceutical Analysis ((WILP course for Dr. Reddys Lab)
Courses taught in AY 2023-24, 1^st SEM	1	Advanced Pharmaceutical Chemistry (3 hrs/wk lectures)
	2	Clinical Research (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)
Courses taught in AY 2023-24, 2^nd SEM	1	Advanced Medicinal Chemistry (3 hrs/wk lectures)
	2	Intellectual Property Rights and Pharmaceuticals (3 hrs/wk lectures)
	3	Intellectual Property Rights and Pharmaceuticals (WILP course for Industry professionals)

Further Contribution

A. Curriculum development: Was part of

B. Pharma and M. Pharma Curriculum redesign in 2011
B. Pharma and M. Pharma Curriculum redesign in 2014
M. Tech. (Pharmaceutical Operations and Management) curriculum design for Cipla Ltd.
B.E. in Pharmaceutical Science and Engineering curriculum design
B. Sc. In Pharmaceutical Sciences curriculum design for Dr. Reddy’s Lab. Hyderabad in 2020
Benchmarking of M. Pharm (Pharmaceutics and Pharmaceutical Chemistry) program and curriculum redesign in 2020
M Pharm in Pharmacology curriculum design in 2020

B. Detailing out the curriculum for courses:

Pharmaceutical Chemistry
Advanced Pharmaceutical Chemistry
Medicinal Chemistry I
Medicinal Chemistry II
Pharmacology I
Pharmacology II
Process Chemistry

C. New courses offered first time in BITS:

Pharmaceutical Chemistry
Advanced Pharmaceutical Chemistry

D. Development of a New Laboratory:

Industrial Research Laboratory (teamwork)
Pharmaceutical Chemistry Research laboratory done alone

E. Upgradation of the existing laboratory:

Pharmaceutical Chemistry lab
Natural drugs lab

F. New Lab Experiments: Routinely, the practicals have been updated to keep pace with developments in Pharmacy, and hence new experiments are also developed. Also, new experiments were developed for new courses in Pharmaceutical Chemistry and Advanced Pharmaceutical Chemistry.

Courses taught

CHEM F422: Statistical Thermodynamics (IC: S-I 23-24, Co-Instructor: S-I 22-23, IC: S-I 24-25)

CHEM F312: Physical Chemistry IV (tutor: S-I 22-23)

CHEM F242: CE-II (S-II 23-24)

CHEM F242: CE-I (S-II 21-22)

CHEM F111: General Chemistry (lecture: S-II 22-23)

CHEM F111: General Chemistry (tutor: S-II 22-23, S-I 22-23, S-II 21-22, S-II 21-22, S-II 23-24)

CHEM F110: Chemistry Lab. (S-I 23-24)

Thermodynamics: (S-I 24-25)

Courses

CE F231 - Fluid Mechanics (Lecture and Tutorial) at Birla Institute of Technology and Science, Pilani
BITS F110 - Engineering Graphics (Lecture) at Birla Institute of Technology and Science, Pilani
CE F243 - Soil Mechanics (Lecture, Tutorial and Practical) at Birla Institute of Technology and Science, Pilani
CE F313 - Foundation Engineering (Lecture and Tutorial) at Birla Institute of Technology and Science, Pilani
CE G623 - Ground Improvement Techniques (Lecture) at Birla Institute of Technology and Science, Pilani
CE G623 - Ground Improvement Techniques (Lecture)
CVEN 689 - Soil Improvement at Texas A&M University
CE 6312 - In-situ Testing at The University of Texas at Arlington
UNIV-EN 1131 - Student Success at The University of Texas at Arlington

To be updated soon.

Teaching Experience

Professor, Department of Chemistry, BITS Pilani, Hyderabad Campus, Telangana, December 22, 2018 to till date.

Professor, Department of Chemistry, BITS Pilani, Pilani Campus, Rajasthan, February 2013 to December 21, 2018.

Associate Professor, Department of Chemistry, BITS Pilani, Pilani Campus, Rajasthan, August 2010 to January 2013.

Assistant Professor, Department of Chemistry, BITS Pilani, Pilani Campus, Rajasthan, December 2003 to July, 2010.

Lecturer, December 1999 to November 2003, Department of Chemistry, BITS Pilani, Pilani Campus, Rajasthan.

Courses taught:
Chemistry I (Physical Chemistry)
Chemistry II (Organic and Inorganic Chemistry)

General Chemistry (Physical, Organic and Inorganic)

Chemical Kinetics

Chemical Thermodynamics
Polymer Chemistry
Structure and Properties of Materials
Instrumental Methods of Analysis (for both M.Sc.(Chemistry) and M.Sc.(Biological Science) students)
Physical Methods in Chemistry

Advanced Physical Chemistry

Physical Chemistry I

Chemistry Project Laboratory
Chemical Experimentation

Chemical Experimentation II

Measurement Technique I

Chemistry Laboratory

Laboratory Oriented Project

Computer Projects

Study Project

Laboratory Project

Courses developed and taught:

Photochemistry and Laser Spectroscopy

Courses developed for WILP:
Chemistry-I and Chemistry-II for B.Sc. Engineering Sciences.

Courses restructured:
Modified course contents for the courses, Chemical Kinetics, Chemical Thermodynamics, and Polymer Chemistry at M.Sc. levels.
Offered some new experiments for the courses Instrumental Methods of Analysis, Chemistry Project Laboratory, Chemical Experimentation and Chemical Experimentation II.
Acted as Instructor-in-charge for the multi-section courses like Chemistry I, Chemistry II and General Chemistry.

To be updated soon.

Teaching

MTech Data Science and Engineering - Machine Learning
MTech Data Science and Engineering - Natural Language Processing
MTech Data Science and Engineering - Information Retrieval
MTech Data Science and Engineering - Dissertation
Artificial Intelligence and Machine Learning Program - Classification
Artificial Intelligence and Machine Learning Program - Regression
Artificial Intelligence and Machine Learning Program - Text Mining

Courses

Machine Learning
Natural Language Processing
Text Mining
Deep Learning
Classification Algorithms
Regression, AIML
Probability and Statistics
Information Retrieval
Big Data Analytics
Software Engineering

Administrative Responsibilities:

Lead Instructor for MTech courses Machine Learning, Natural Language Processing an Information Retrieval
CSIS SPOC Practice School(PS) 1 and Practice School 2 Coordination
Guest Faculty Interviews for MTech cluster, AIML, MTech specific and nonspecific programs.
Contribution to content design of courses in MTech Data Science Program and AIML Courses
Preparation of digital content for various MTech Data Science and AIML courses.
Conduction of session for faculty development program on Machine Learning

Assistant Professor | Cummins College of Engineering for Women, Pune, India

Teaching Areas:

Data Science and Big Data Analytics
Information Retrieval
Natural Language Processing
Machine Learning
Software Engineering
Project Management
Software Testing & Quality Assurance
Web Technologies

Administrative Responsibilities

Pune University Chairperson of undergraduate courses
Pune University Paper Setter and evaluator of undergraduate courses
Cummins College NAAC Coordinator
Cummins College NBA Coordinator for Information Technology Department
Academic Audit In charge for Information Technology Department
Cummins College Incubation Centre Coordinator
Cummins College Innovative Minds Coordinator
Cummins College Internationalization Committee Coordinator
Cummins College College Cultural Festival Coordinator
Cummins College National level technical event coordinator
Infrastructure management of IT building of Cummins college of Engineering for Women
Software Inventory Coordinator
Seminar Coordinator and Project Coordinator
Project, Seminar Guide
IEEE Conference Organizing Committee of Cummins college of Engineering for women

Associate Consultant | Zensar Technologies, India

Domain: US stock exchange

Responsibilities:

Client Interaction
Preparation of functional specifications.
Coding and development of business components
Code Optimization.
Testing and Project Documentation

Courses

Chemistry I
Chemistry II
General Chemistry
Inorganic chemistry I
Chemistry Laboratory,
Modern Analytical Chemistry
Advanced Nuclear and Radiochemistry
Instrumental methods of analysis
Chemical Experimentation
Environmental Chemistry
Recent advances in Chemistry

Courses Taught

Courses Taught at Birla Institute of Technology and Science, Pilani, Rajasthan, INDIA since August 2005 till date:

Advance Composite Materials for Structures (Analysis and Design; CE G 533): PG course
Mechanics of Solids (ES C 221): UG Course
Prestressed Concrete Structures (CE G614): PG Course
Earthquake Engineering (CE G 615): PG Course
Design of Steel Structures: CE C381: UG Course
Design of Concrete Structures: CE C383: UG Course
Analysis of Structures: CE C241: UG Course
Advance Structural Analysis CE G617: PG Course
Theory of Elasticity and Plasticity, CE G641: PG Course
Finite Element Analysis, CE G619: PG Course

Courses Taught at Lawrence Technological University, Southfield, Michigan, USA (from November 2001-2004):

Stability of Structures (PG Level)
Advance Composite Materials for Structures (PG Level)

Courses taught by me at NIT Warangal (October 2004 to July 2005) as Instructor-in-Charge

1. Mechanics of Material.

2. Advance Structural Design

Courses taught by me at MNNIT Allahabad (September 1988 till November 1999) as Instructor-in-Charge

Strength of Material (UG Level)
Structural Analysis I and II (UG Level)
Engineering System Design (UG Level)
Material Science (UG Level)
Reliability Analysis (UG Level)
Experimental Stress Analysis (PG Level)
Theory of Elasticity (PG Level)
Theory of Elastic Stability of Structures (PG Level)
Theory of Plates and Shells (PG Level)

Teaching

Course No: CHEM F110 & Course Title: Chemistry Laboratory (Analytical methods, synthetic procedures, operation of scientific equipments for collecting data and the analysis of collected data)
Course No: CHEM F111 & Course Title: 1) General Chemistry Lecture on Stereochemistry, Substitution Reactions, Elimination Reactions and Addition Rections and 2) General Chemistry Tutorial (Transition metal coordination complexes, VB and CFT for inorganic complexes, stereochemistry and reactivity of organic compounds, quantum theory, electronic structure of atoms and molecules, spectroscopy, thermodynamics, chemical equilibrium, chemical kinetics)
Course No: CHEM F242 & Course Title: Chemical Experimentation I (Various basic and advance laboratory methods of organic chemistry) (M.Sc. course)
Course No: CHEM F243 & Course Title: Organic Chemistry-II (Stereochemical concepts and their applications in organic synthesis; important functional group transformations; pericyclic reactions & organic photochemistry) (M.Sc. course)
Course No: CHEM F311 & Course Title: Organic Chemistry-III (Reagents and reactions in organic synthesis and disconnection or synthon approach) (M.Sc. course)
Course No: CHEM G557 & Course Title: Solid Phase Synthesis and Combinatorial Chemistry (Ph.D. course)
Research Projects (Ph.D. course)
Labratory Project
Study Project
Design Project
Reading course
Off-campus masters thesis
On-campus masters reduced thesis

Academic Courses

CHE F 212 - Fluid Mechanics (July- Dec 2021, 2022, 2023,2024)
CHE F312 - Chemical Process Laboratory I (Jul-Dec 2021,2022)
CHE F412 - Process Equipment Design (Jan-May 2021, 2022, 2023, 2024)
CHE F341 - Chemical Process Laboratory II (Jan-May 2021, 2022, 2023, 2024)

Informal Courses

CHE G554 - Computational Fluid Dynamics (Jan-May 2021)

Chemical Engineering Laboratory (CEL)

Courses Taught at BITS-Pilani, Hyderabad Campus

First Semester 2024-25 (Ongoing Semester)

CS G553: Reconfigurable Computing (Lecture, Lab)(as IC)
EEE/INSTR F313: Analog and Digital VLSI Design (Tutorial)

Summer Term 2023-24

EEE/INSTR F313: Analog and Digital VLSI Design (Lecture) (Half)

Second Semester 2023-24

MEL G642: VLSI Architecture (Lecture, Lab) (Half)

Second Semester 2022-23

MEL G642: VLSI Architecture (Lecture, Lab) (IC)
CS G523: Software for Embedded Systems (Local Instructor only)

First Semester 2022-23

CS G553: Reconfigurable Computing (Lecture) (IC)
MEL G626: VLSI Test and Testability (Lecture, Labs) (IC)

Second Semester 2021-22

CS F342: Computer Architecture (Lecture, Labs) (IC)
CS/ECE/EEE/INSTR F241: Microprocessor and Interfacing (Tutorials)

First Semester 2021-22

CS G553: Reconfigurable Computing (Lecture, Labs) (IC)
EEE F348: FPGA Based System Design (Lab Course) (IC)

Second Semester 2020-21

CS F342: Computer Architecture (Lecture, Labs) (IC)
CS F241/EEE F241/ECE 241/INSTR F241: Microprocessors and Interfacing (Tutorial) for Half Semester
CS G553: Reconfigurable Computing as Local coordinator for Telepresence course

First Semester 2020-21

MEL G624: Advanced VLSI Architecture (Lecture, Labs) (IC)
CS G553: Reconfigurable Computing (Lecture, Labs) (IC)

Second Semester 2019-20

CS F342: Computer Architecture (Lecture, Labs) (IC)
EEE F341: Analog Electronics (Lab)

First Semester 2019-20

MEL G624: Advanced VLSI Architecture (Lecture, Labs) (IC)
CS G553: Reconfigurable Computing (Lecture, Labs) (IC)

Second Semester 2018-19

CS F342: Computer Architecture (Lecture) (IC)
CS G553: Reconfigurable Computing (Lecture) (IC)

First Semester 2018-19

CS F215/EEE F215/ECE 215/INSTR F215: Digital Design (Lecture, Tutorial) (IC)
MEL G642: VLSI Architecture (Lecture, Lab) (IC)

Second Semester 2017-18

CS F342: Computer Architecture (Lecture, Labs) (IC)
EEE F348: FPGA -based System Design Lab (Lab)

First Semester 2017-18

EEE F313/INSTR F313: Analog and Digital VLSI Design (Tutorial)
EEE F348: FPGA -based System Design Lab (Lab) (IC)

Second Semester 2016-17

CS F342: Computer Architecture (Lecture, Labs)

First Semester 2016-17

EEE F313/INSTR F313: Analog and Digital VLSI Design (Lecture, Tutorial) (IC)
CS F215/EEE F215/ECE 215/INSTR F215: Digital Design (Tutorial, Labs)

Second Semester 2015-16

CS F342: Computer Architecture (Lecture, Labs) (IC)

First Semester 2015-16

EEE F313/INSTR F313: Analog and Digital VLSI Design (Lecture, Tutorial) (IC)
CS F215/EEE F215/ECE 215/INSTR F215: Digital Design (Labs)
CS G553: Reconfigurable Computing (Labs)

Second Semester 2014-15

CS F342: Computer Architecture (Lecture, Labs) (IC)

First Semester 2014-15

EEE F313/INSTR F313: Analog and Digital VLSI Design (Lecture, Tutorial) (IC)

Second Semester 2013-14

CS F342: Computer Architecture (Lecture, Labs) (IC)

First Semester 2013-14

CS /EEE /ECE C391 /CS/EEE/ECE/INSTR F215: Digital Electronics and Computer Organization/Digital Design (Lecture, Lab and Tutorial)

Second Semester 2012-13

EEE /ECE C364: Analog Electronics (Lecture, Lab and Tutorial) (IC)
CS/ECE/EEE/ES 263: Microprocessor Programming and Interfacing (Lab)

First Semester 2012-13

CS /EEE /ECE C391:Digital Electronics and Computer Organization (Lecture, Lab and Tutorial) (IC)

Second Semester 2011-12

ES C263 : Microprocessor Programming and Interfacing (Lab and Tutorial)
EEE/ECE C272 : Circuits and Signals (Tutorial)
TA C222: Measurement Techniques II (Lab Course)

First Semester 2011-12

ES C241 : Electrical Sciences I (Tutorial)

Current Courses

Industrial Instrumentation & Control (INSTR F343)
Transducers and Measurement Systems (INSTR F312)

Courses Taught

Electronic Instruments and Instrumentation Technology (INSTR C355)
Transducers and Measurement Systems (INSTR C381)
Industrial Instrumentation & Control (INSTR C312)
Electrochemical Energy Conversion (EEE C371)
Control Systems (AAOC C321)
Electrical Sciences I (ES C241)
Electrical Science II (ES C272)
Measurement Techniques II (TA C222)

Teaching

Maintaining passion for teaching for the last 27+ years

Engineering Graphics (400 Capacity Lecture Theatre of Pilani Campus) | 2002-03-04

Courses Handled

FD (UG) Level

Design of Machine Elements | Goa Campus: 9 Semester as an I/C
Computer Aided Design (CAD) | Pilani Campus: 2 Semesters and Goa Campus 15 Semesters as an I/C
Mechanical Engineering Drawing (Computer based) | Goa Campus: 2 Sems as an I/C and 2 Sems as an Instructor
Advanced Mechanics of Solids | Pilani Campus as an Instructor
Mechanics of Solids | Pilani Campus: 3 Semesters as an Instructor and Goa Campus: 4 Semesters as an Instructor
Structure and Properties of Materials | Pilani Campus: 3 Semesters as an Instructor and 3 Goa Campus: 3 Semesters as an I/C
Engineering Graphics (Computer based) | Pilani and Goa Campus: 18 Semesters as an I/C
Thermodynamics | Pilani and Goa Campus: 2 Semesters as an Instructor
Measurement Techniques | Pilani and Goa Campus: 4 Semesters as a Lab Instructor

HD (PG) Level

Finite Element Method | Goa Campus: 1 Semester and as I/C and 2 Semesters as Instructor
Fracture Mechanics | Pilani and Goa Campus: 5 Semesters as an I/C
Computer Aided Analysis and Design (CAAD) | Goa Campus: 7 Semesters as an I/C
Plat Layout & Design (Work Integrated Learning Prog for NTPC) | 2 Semesters as an I/C

For ASME (American Society of Mechanical Engineering) | Onsite Training for industrial professionals]

Advanced Finite Element Analysis
Computer Aided Analysis and Design
Computer Aided Modelling & Basic FEA

Courses Designed

Engineering Graphics with AutoCAD (Online: Teaching, Lab and Exams) [2000]
Computer Aided Design with industrial approach (Mathematical + S/W oriented for modeling and analysis) [2011]
Fracture Mechanics [2003]
Mechanical Engineering Drawing with Pro-Engineer [2009]
For ASME: Advanced Finite Element Analysis, Computer Aided Analysis and Design, Computer Aided Design and Manufacturing [2010]
Computer Aided Engineering for Masters in Automotive Engineering at Tata Technolgies, Pune (May-2014)

Subject Workshop Conducted

Structure and Properties of Materials (at Pilani Campus | 2002)
Mechanical Engineering Drawing with Pro-Engineer (at Goa Campus | [2009)
Engineering Graphics (at Pilani | 2000 & at Goa 2004)
Teaching & Evaluation at BITS (Part of Intensive Teaching Workshop) [at Goa Campus, 2010]

Curriculum Development

Structure and Revision of curriculum development of Mechanical Engineering (2018-19) | Deployed in 2020
Structure and Revision of curriculum development of Mechanical Engineering (2009-10) | Deployed in 2011

Book Publication

Engineering Graphics with AutoCAD. D. M. Kulkarni, A P Rastogi and A K Sarkar. Prentice Hall of India, New Delhi. July-2010

[Implemented as a Text Book in BITS Campuses, IIT Roorkee, Deharadun Institute of Technology, Deharadun, Yashvantrao Chavan College of Engineering, Nagpur, Vel-Tech University, Chennai, K L U University, Andhra Pradesh]

ENGINEERING GRAPHICS WITH AUTOCAD - KULKARNI, D. ... (phindia.com)

Overview of course conduct

Courses

ON-CAMPUS

ADVANCED CALCULUS

LINEAR ALGEBRA

COMPLEX VARIABLES

DIFFERENTIAL EQUATIONS

PROBABILITY AND STATISTICS

OPTIMIZATION

OPERATIONS RESEARCH

NUMERICAL METHODS

MATHEMATICAL METHODS

NONLINEAR OPTIMIZATION

DISCRETE MATHEMATICAL STRUCTURES

WILP:

PROBABILITY AND STATISTICS

ENGINEERING MATHEMATICS

MATHEMATICAL FOUNDATIONS FOR DATA SCIENCE

Courses

First Degree at BITS Pilani

Mathematics I (Calculus)
Mathematics II (Linear Algebra, Complex Analysis)
Algebra I
Algebra II (Elective)
Commutative Algebra (Elective)
Design Project
Study Project

PhD at BITS Pilani

Linear Algebra
Research Practice
Study in Advanced Topics
Research Methodology-1
Research Project-1
Research Project-2
Teaching Practice-1

Indian Statistical Institute, Bangalore

Commutative Algebra
Algebraic Geometry
Algebra I for B.Math
Algebra II for B.Math
Algebra III for B.Math
Algebra II for M.Math

Courses

I teach the following courses:

Regular Courses:

MATH F111: Mathematics-I (Advanced Calculus)
MATH F112: Mathematics-II (Linear Algebra and Complex analysis)
MATH F113: Probability and Statistics
MATH F211: Mathematics-III (Differential Equation)
MATH F212: Optimization
MATH F343: Partial Differential Equations
MATH F342: Differential Geometry
BITS F113: General Mathematics-I
BITS F114: General Mathematics-II
BITS F218: General Mathematics-III

Off Campus Courses (WILP)

PEAB ZC113: Probability and Statistics
PS ZC235: Linear Algebra and Optimization

Project Courses:

BITS F421T / 422T / 423T / 424T: First Degree Thesis (FDTS)
MATH F266: Study Oriented Project (SOP)
MATH F366: Lab Oriented Project (LOP)
MATH F376 / F377: Design Project (DP)

PhD Courses:

BITS G649: Reading Course
BITS G513: Study in Advanced Topics
BITS G529: Research Project - I
BITS G539: Research Project - II
BITS G540: Research Practice
BITS G791T: Teaching Practice - I
BITS C797T: PhD Seminar
BITS C799T: PhD Thesis

Courses

Probability and Statistics
Optimisation
Operations Research
Numarical Analysis
Differential Equations
Statistical Inference and Applications
Advanced Statistical Methods [WILP]

Courses

Courses taught at BITS:

Mathematics I (Calculus)
Mathematics II (Linear Algebra and Theory of Complex Variables)
General Mathematics III (Linear Algebra and Linear Programming problem)
Introduction to Functional Analysis
Elementary Real Analysis

Courses

Courses taught at BITS:

• Mathematics I: Calculus

• Mathematics II: Linear Algebra & Complex Analysis

• Elementary Real Analysis

• Introduction to Topology

• Linear Algebra & Optimization

• Mathematics III: Differential equations

• General Mathematics-II

PHA F342: Medicinal Chemistry-II (CO-Instructor)

Courses

asdjskfkd
sdhdklg
asdjdkfh

My Book

qhewrjle
qwekwelterlrg

Course

2020 (Fall Semester)

Mechanics Waves and Oscillations PHY F111
- Electricity, Magnetism, and Optics PHY F214

Courses Offered

January to May 2024

Electrical Sciences (3h of lectures and 1h of tutorial per week)

August to December 2023

Electromagnetic Theory (3h of lectures and 1h of tutorial per week)
Electromagnetic Fields and Microwave Engineering (3h of lectures per week)

January to July 2023

Electrical Sciences (3h of lectures and 1h of tutorial per week)

August to December 2022

Electromagnetic Theory (3h of lectures and 1h of tutorial per week)
Satellite Communications (3h of lectures per week)

January to July 2022

Antenna Theory and Design (3h of lectures per week)
Electrical Sciences (3h of lectures and 1h of tutorial per week)

August to December 2021

Satellite Communications (3h of online lectures per week)
Digital Design (4h of online labs per week)

January to May 2021

Electrical Sciences (3h of online lectures and 1h online tutorial per week)

August to December 2020

Digital Design (3h of online lectures and 1h of online tutorial per week)
Communication Systems (4h of Simulink software based online labs per week)

January to May 2020

Electrical Sciences (3h of lectures and 1h tutorial per week)
Microprocessor programming and interfacing (6h of labs and 2h tutorial per week)

August to December 2019

Introduction to Artificial Neural Networks (3h of lectures and 1h lab per week)
Satellite Communications (3h of lectures per week)
Digital Design (6h of labs per week)

January to May 2019

Electrical Sciences (3h of lectures and 1h tutorial per week)
Signals and Systems (3h of lectures and 1h tutorial per week)
Microprocessor programming and Interfacing (6h of labs per week)

August to December 2018

Satellite Communications (3h of lectures per week)
Embedded Systems Design (2h of online classes per week)
Digital Design (6h of labs per week)

January to May 2018

Embedded Systems Design (2h of online classes per week)
Microprocessor programming and interfacing (6h of labs and 2h tutorial per week)

August to December 2017

Satellite Communications (3h of lectures per week)
Digital Design (4h of labs per week)
Communication Systems (3h of labs per week)

Courses offered at KK Birla Goa campus

Undergraduate

GS F331 Techniques in Social Research

GS F241 Creative Writing

HSS F330 Appreciation of Art

Postgraduate

BITS G511 Advanced Project

BITS G514 Study in Advanced Topic

BITS G581 Writing Seminar

Courses

BITS Pilani (Assistant Professor), Department of Humanities and Social Sciences:

Introduction to Conflict Management.
Environmental Studies.
Introduction to Gender Studies.
Dynamics of Social Change.

University of Oregon (Graduate Instructor), Women and Gender Studies Department:

Introduction to Women, Difference and Power.
Perspectives on Global Women.
Gender, Literature and Culture.
American Society.
Sociology of Women.

University of Oregon (Graduate Instructor), Department of Sociology:

Introduction to Sociology.
Social Inequality.

Courses Taught

Human Computer Interaction (On-campus)
Multimedia Computing (Both on-campus and WILP; developed and introduced this course for WILP)
Software Testing Methods (On-campus)
Design and Analysis of Algorithms (On-campus)
Database Systems (On-campus)
Software Testing Methodologies (WILP)
Operating Systems: Tutorials (On-campus)
Data Warehousing (On-campus)
Discrete Structures for Computer Science (On-campus)
Discrete Mathematics (On-campus)
Computer Graphics (Both on-campus and WILP; developed and introduced this course for WILP)
Machine Learning (On-campus)
Cloud Computing: Labs (On-campus)
Object Oriented Analysis and Design (On-campus)
Parallel Computing (Both on-campus and WILP)
Computer Programming-II (On-campus)
Artificial Intelligence (On-campus)
Data Processing (On-campus)
Computer Programming-I (On-campus)
Database Systems and Applications (On-campus)
Geographical Information Systems (On-campus; jointly developed and introduced this course at BITS Pilani, and co-authored the EDD Notes for the same)
Computer Networks (WILP)
Computer Programming (WILP)
Measurement Techniques-II (On-campus)
Computer Aided Analysis and Design (On-campus)
Fourth Generation Languages and Applications (On-campus)
Computer Based Simulation and Modelling (Both on-campus and WILP)

Courses

Introductory Psychology (GS F232)
Research Methodology (BITS E661)
Organizational Psychology (HSS F323) [Offered to Dubai Campus through TP; Semester I: 2018-19]
Human Resource Development (HSS F328)
Introduction to Conflict Management (GS F311)
Environmental Science (EVS) (BITS F225) [As HSS Co-Instructor]
Research Methodology (SPS 407)
Statistics in Sports Sciences (SPS 435/534)
Applied Social Psychology in Sports (SPS 403)
Positive Psychology (SPS 431/531)

COURSES TAUGHT

Undergraduate Level

Graduate Level

Reaction Engineering | Advanced Process Control

Work Integrated Learning Program (UG/PG)

Biological Wastewater Treatment Techniques & Recycling | Unit Operations -I | Process Instrumentation and Control

Subjects currently taught by me

```
CS F-111 Computer Programming Lab
```
```
CS F-213 Object Oriented Programming
```

CS F-342 Computer Architecture (Lab and Tutorial)

```
CS F-441 Computer Vision ( an Elective)
```

CS G-524 Advanced Computer Architecture (PG course)

Heat Transfer (CHE F241)

Engineering Chemistry (CHE F214)

Teaching Courses

As Instructor in Charge

Separation Process II (CHE F313)-Autumn Semester
Transport Phenomenon (CHE F414)- Autumn Semester
Process Equipment Design (CHE F412)- Spring Semester
Membrane Science and Engineering (CHE F423)-Autumn Semester
WILP (Work Integrated Learning Programme), Process Equipment Design (PE-ZC412)- Spring Semester
WILP (Work Integrated Learning Programme), Air Pollution Control Technologies (EE-ZG614)- Spring Semester

As Tutorial Instructor

Chemical Engineering Thermodynamics (CHE F213)-Autumn Semester
Thermodynamics (BITS F111)-Autumn Semester
Chemical Process Calculations (CHE F211)-Autumn Semester
Numerical Methods in Chemical Engineering (CHE F242)-Spring Semester
Heat Transfer (CHE F241)- Spring Semester
Process Design Principles-II (CHE F343)-Spring Semester

BITS F110: Engineering Graphics (P)

Teaching

EE ZG623: Environmental Impact and Risk Assessment

BITS F110: Engineering Graphics

CE F342: Water & Waste Water Treatment (P)

BITS F240: Introduction to Environmental and Sustainable Systems Engineering

Courses Taught/Teaching

Digital Image Processing
Digital Signal Processing
Signals and Systems
Electrical Sciences
Medical Instrumentation
Advanced Digital Signal Processing
Introduction to Artificial Neural Networks

Courses Taught

Prescriptive Analytics
Predictive Analytics
Production and Operations Management
Operations and Supply Chain Management
Quantitative Methods
Project Management
Operations Strategy
Supply Chain Management
Management Science
Marketing Research
Total Quality Management
Principles of Management

Academic Courses

CHE F314- Process Design Principles – 1

CHE F312- Chemical Engineering Laboratory-1

Courses

Process Engineering

Dosage Form Design

Pharmaceutical Process Development and Scale-up

Scale-up of pharmaceutical Operations

Pharmaceutical Unit Operation I

Pharmaceutical Unit Operation II

Course taught

Algebra-I
Algebra-II
Commutative Algebra
Complex Analysis
Differential Geometry
Discrete Mathematics
Elementary Real Analysis
Engineering Mathematics-II
Environmental Statistics
Introduction to Topology
Mathematics-I
Mathematics-II
Mathematics-III
Measure and Integration
Optimization
Optimization Methods for Analytics
Probability and Statistics

Courses

Technical Communication
Business Communication
Technical Report Writing.
Effective Public Speaking
Advanced Communicative English
Research Methodology
Writing Seminar
Creative Thinking

Special Programme/Courses

Effective Communication
Spiritual Intelligence
Effective Public Speaking
Professional Presentations
Corporate Communication
Management Communication
Report Writing

Courses Taught

Thermodynamics (Foundation Course)
Fluid Mechanics
Heat Transfer
Chemical Process Calculations
Separation Processes
Selected Chemical Engineering Operations
Chemical Engineering Thermodynamics
Process Design Decisions
Advanced Chemical Engineering Thermodynamics
Reaction Engineering
Advanced Transport Phenomena
Environmental Pollution Control
Kinetics and Reactor Design
Unit Operations-I (WILP)
Unit Operations-II (WILP)
Fundamentals of Transport Processes (WILP)
Process equipment Design (WILP)

Courses Taught

BITS Pilani, Hyderabad campus(2013- )

PHY F312 Statistical Mechanics
PHY F415 General Theory of Relativity & Cosmology
PHY F413 Particle Physics
PHY F343 Nuclear and Particle Physics
PHY F215 Introduction to Astronomy & Astrophysics
BITS F111 Thermodynamics
PHY F110 Physics Lab-1
PHY F111 Mechanics, Oscillations & Waves
PHY F212 Electromagnetic Theory I
PHY F241 Electromagnetic Theory II
PHY F317 Introduction to Radio Astronomy

Higher Degree Course:

PHY G521 Nuclear and Particle Physics
BITS G513 Study in Advanced Topics

Others

Advanced Quantum Mechanics, MSc in Physics, Lady Brabourne College, Kolkata, 2011-12.
General Physics, MTech in Bio-Technology, St Xaviers' College, Kolkata, 2012.
Tutor, MPhysics, University of Manchester, 2006.

Courses

Research Methodology
Techniques in Social Research
Introduction to Psychology
Consumer Behaviour
Comparative Religion
Applied Social Psychology
Tech. Interventions
Educational Policy-Planning

Courses

Discipline Courses:

BIO F110: Biology Laboratory

BIO C111 & BIO F111: General Biology

BIO C322: Ecology

BIO C342: General Physiology

BIO C411: Laboratory

BIO F216: Water, Sanitation & Solid Waste Management

BIO F241: Ecology & Environmental Science

BIO F376: Design Oriented Project

BIO F411: Laboratory

BIO G525: Environmental Biotechnology & Waste Management

BIO G661: Gene Toxicology

BIO G671: Bioconversion Technology

MPH G510: Biostatistics and Computers in Public Health

SAN G512: Sanitation and Public Health

Other Courses:

BITS C213: Introduction to Environmental Studies

BITS C313: Lab Oriented Project

BITS C323 & BITS C324: Study Oriented Project

BITS F225: Environmental Studies

BITS G513: Study in Advanced Topics

BITS G540: Research Practice

BITS G629: Dissertation

TA C211: Measurement Techniques I

WILP Courses:

SSTM ZG523: Biological Treatment Principles and Design for Wastewater Systems

Teaching

Prof. Chattopadhyay mainly teaches Quantum Mechanics, Group Theory and Physical Chemistry courses for the M.Sc., Ph.D. and first year B.Tech. students.

Courses Taught

●CHEMICAL APPLICATIONS OF GROUP THEORY (Advanced Group Theory Course)-For Ph.D Students

●ELECTRONIC STRUCTURE THEORY (Advanced Quantum Mechanics Course)-For Ph.D Students

●ADVANCED INORGANIC CHEMISTRY (Group Theory & Inorganic Chemistry Course) -For Ph.D Students

●PHOTOPHYSICAL CHEMISTRY (Elective Course for M.Sc. students)

●ATOMIC & MOLECULAR STRUCTURE (Quantum Chemistry course for M.Sc. students)

●PHYSICAL CHEMISTRY II (Quantum Chemistry course for M.Sc. students)

●PHYSICAL CHEMISTRY III (Group Theory, Advanced Quantum Chemistry course for M.Sc. students)

●BONDING IN INORGANIC COMPOUNDS (Group Theory Course for M.Sc. students)

●CHEMICAL THERMODYNAMICS (Thermodynamics course for M.Sc. students)

●CHEMISTRY I (Physical Chemistry course for 1st year students)

●CHEMISTRY II (Inorganic & Organic course for 1st year students)

●INTRODUCTION TO ENVIRONMENTAL STUDY (Environmental science Course for 1st year students)

●GENERAL CHEMISTRY(for 1st year students)

●MEASUREMENT TECHNIQUES I (Lab Course for 1st year students)

●CHEMISTRY LABORATORY (Lab Course for 1st year students)

●DESIGN PROJECT

●COMPUTER PROJECT

●LAB PROJECT

●STUDY-ORIENTED PROJECT

●RESEARCH METHODOLOGY

Courses Taught

Microfluidics and its applications
Refrigeration and Air-Conditioning
Prime Movers and Fluid Machines (I)

Courses

Advanced Drug Delivery Systems (PHA G617)

Cosmetic Science (PHA F422)

Process Engineering (BITS-F219)

Dosage Form Design (WILP, POMSS ZG512)

Courses

Electrical Sciences
Signals and Systems
Electronic Devices
Digital Design
Microprocessors and Interfacing
Digital Signal Processing
Analog Electronics
Power Quality

Courses Taught

FD courses

BIOT F345 Proteomics
BIO F213 Cell Biology
BIO F242 Introduction to bioinformatics
BIO F311 Recombinant DNA Technology
BIO F111 General Biology
BIO F110 Biology Laboratory

HD Courses

BIO G512 Molecular Mechanism of Gene Expression
BIO G542 Advanced Cell and Molecular Biology

Current Semester

MATH F213 : Discrete Mathematics (IC: Mathematics Core Course) Link
MATH F211 : Mathematics III (Integrated First Degree Course) Link

At BITS-Pilani, Goa Campus

MATH ZC234 Linear Algebra and Optimization, Spring 2025
MATH F428 Time Series Analysis and Forecasting, Fall 2024
BITS F314 Game Theory and it's Applications, Spring 2023, Fall 2023, Spring 2024
MATH F420 Mathematical Modelling, Spring 2022
MATH F211 Mathematics-III (Differential Equations), Fall 2022, Fall 2024
MATH F112 Mathematics-II (Complex Analysis), Spring 2021
MATH F113 Probability and Statistics, Spring 2021, Fall 2022, Spring 2023, Fall 2023
MATH F444 Numerical solutions to ODE, Fall 2020

At Banaras Hindu University, Varanasi

MTB 302 Ordinary Differential Equations, Fall 2014
MTB 401 Partial Differential Equations, Spring 2015

Teaching

Year	Sem	Tutorial1	Tutorial2	Tutorial3	Lecture1	Lecture2
2020-21	1st sem	Electrical Science
2020-21	2nd sem	Electrical Science (2)	Microprocessor & Interfacing
2021-22	1st sem	Electronic Devices	Analog & Digital VLSI Design		Physics & Modeling of Microelectronic Devices (IC)
2021-22	2nd sem	Microelectronics			Physics & Modeling of Microelectronic Devices (WILP, IC)
2022-23	1st sem	Electronic Devices	Analog & Digital VLSI Design	Digital Design	Physics & Modeling of Microelectronic Devices (WILP, IC)
2022-23	2nd sem	Analog Electronics	Microelectronics		Electrical & Electronic Tech (WILP, IC)
2023-24	1st sem	Electronic Devices	Analog & Digital VLSI Design	Electrical Science	Electronic Devices (Instructor)
2023-24	2nd sem	Microelectronics	Analog Electronics	Signal & System	Microelectronics (Instructor)
2024-25	1st sem	Electronic Devices	Analog & Digital VLSI Design		Semiconductor Fabrication Technology (IC)	Analog & Digital VLSI Design (Instructor)

Courses Taught (On-Campus)

First Degree (B.E.) Courses Taught

Communication Systems
Analog Electronics
Electrical Sciences
Electronic Devices
Digital Design
Microelectronic Circuits
Analog and Digital VLSI Design
Electronic Instrumentation and Instrumentation Technology

Higher Degree (M.E. in Microelectronics) Courses Taught

IC Fabrication Technology
Physics and Modeling of Microelectronic Devices
Analog IC Design
VLSI Test and Testability

Courses Taught and Teaching Philosophy

People: Sashideep Gutti and Kannan Ramaswamy along with other interested faculty in the Physics department

Aim: The primary vision of this group is to make undergraduate level Physics teaching exciting, engaging, and rewarding for students. This is a challenge as a University like BITS has students with varied interests and ambitions. In particular, one one hand there are students who are primarily looking for applications of Physics that could be turned into an idea for a startup, on the other hand there students who are purists. They want in depth presentation of ideas in Physics. It is therefore a big challenge for the instructors to capture the attention of students of a class of 500 students for an entire semester. Keeping this in mind, our aim is to create situations in the classroom that are rewarding for both categories of students. Furthermore, we have developed several classroom demonstrations to explain tough ideas like precession and Coriolis force. Our motto is to create activities that will let students learn!

Teaching methodology: Several teaching techniques need to be blended appropriately for creating an ambiance conducive to learning. It depends a lot on how students respond to the instruction in the first few days of the class. It appears that activity based learning is the way to go. In activity based learning there is minimal lecturing from the instructor. Instead the instructor plans activities that will make the students think and learn about concepts and ideas.

One such activity based teaching method is called Research Based Pedagogical Tool or RBPT in short. COESME, IISER, Pune has conducted several RBPT workshops across several parts of the country for the College teachers at various levels. Kannan Ramaswamy has participated in three RBPT workshops starting from the beginners to the advanced levels.

In the RBPT method, the instructor takes up a concept to be taught in the class and converts it in the form of research questions and activities that students will undertake as a part of the course. In particular, the research problem is chosen in such a manner that students are excited and motivated to carry out the various activities planned by the instructor. Importantly, RBPT method emphasizes student autonomy - students have to come up with the ideas themselves, so that they get a real feel of the research and the problem.

Please find below a link that helps to understand RBPT based activity to teach a particular concept. Instructors who want to know more about RBPT based teaching methodology could contact COESME, IISER, Pune (http://www.iiserpune.ac.in/outreach/coesme).

(An example of RBPT)

Click here for RBPT

Click here to see student's response to RBPT assignment

Publications:

"Ideas to enhance learning", Kannan Ramaswamy, Teacher plus Magazine, May – June 37, 2015
"Interlinking Ideas Across Discipline for Effective Learning: An Illustration", Sashideep Gutti and Kannan Ramaswamy, Book Chapter in Opportunities and Challenges in Classroom Teaching: A Few Reflections, Jain Brothers, New Delhi, 2016, ISBN: 978-81-8360-232

Classroom Demonstrations:

Gyroscope – to teach torque, angular momentum and precession (https://youtu.be/k5WTACO1pvI)
Coriolis bench – to demonstrate Coriolis force
Tornado in a bucket – this demo was used to show that a mass rotating on a table cannot be pulled to the center, by a string attached to the mass, with a finite force. The formation of the "eye of a storm" was explained based on this demonstration. Gyroscope – to teach torque, angular momentum and precession (https://www.youtube.com/watch?v=-xrHAoNs4rE)
Faraday cage – To show that electric field inside a metal box is zero
Sliding magnets on a copper plate and magnets dropped through a hollow copper pipe: to show a manifestation of Lenz's law and Eddy currents
Eddy current pendulum – to demonstrate the effect of eddy currents in a spectacular manner

Useful teaching related references and links

· www.facultyfocus.com (this link discusses several strategies on teaching and learning)

· Teaching and Learning STEM by Felder and Brent, Jossey – Bass, Wiley, 2016 (This is a very resourcelful book for instructors who are involved in teaching science, engineering and mathematics)

· How learning happens by Hendrick Kirschner and Paul A., Taylor and Francis, 2020 (A very interesting collection of ideas on educational psychology. It has several useful references for instructors.)

Courses taught

Foundation courses for undergraduate students :

Mechanics, Waves and Oscillations
Electromagnetic Theory - I
Mechanics, Waves and Oscillations Laboratory

Compulsory disciplinary courses for M.Sc Physics students :

Electromagnetic Theory-II
Electromagnetism and Optics Lab
Modern Physics Laboratory
Solid State Physics
Advanced Physics Laboratory
Optics

Elective course :

Introduction to Nanoscience

Study and Lab Oriented Projects :

Spintronics
Electromagnetic Cloaking
Biosensors
Solar Cells
Nanoplasmonics

First Degree Dissertation :

Magneto-optics in Ferrofluids
Nanoplasmonics
Photovoltaics

Ph.D Course :

Research Project
Selected topics in Physics

Courses Taught at BITS

Mathematics-I(Advanced Calculus)
Mathematics-II(Linear Algebra and Function of Complex Variables)
Mathematics-III(Differential Equations)
Numerical Analysis
Graphs and Networks
Algebra-I & II(Modern Algebra)
Elementary Real Analysis
Elementary Number Theory
Discrete Mathematics
Combinatorial Mathematics

Teaching Pedagogy:

1. Presentation slides and board teaching.

2. Group assignment in lecture class.

3. Self study component for excursion in the topics taught in the class.

4. Group presentations

5. Unstructured lab to train the students about writing pseudo code for algorithms

(specially in Discrete Mathematics, Graphs and Networks, Number Theory,

Combinatorial Mathematics), which are useful in their placements.

WILP Courses:

Graphs and Networks
Discrete Mathematics
Calculus

Reading Courses:

Cryptography
Advanced Graph Theory
Graph Algorithms

Teaching

Mathematics I (Advanced Calculus)
Mathematics II ( Linear Algebra, Complex Analysis)
Mathematics III(Differential Equations)
Probability & Statistics
Probability & Statistics(WILP)
Graphs & Networks
Differential Geometry
Discrete Mathematics
Cosmology
Optimization
Operations Research
Numerical Analysis
Engineering Mathematics

Teaching @ BITS

Teaching Excellence Award 2022

I was conferred the Award of Excellence in Teaching by BITS Pilani K K Birla Goa Campus on September 5, 2022.

Current Semester (2023-24)

Nonlinear Optimization
MATH II (Linear Algebra & Complex Variables)

First Degree Courses Taught

Mathematics-I (Calculus)
Mathematics II (Linear Algebra and Complex Analysis)
Mathematics-III (Ordinary Differential Equation)
Numerical Analysis
Optimization
Mathematical Methods
Partial Differential Equations
Nonlinear Optimization
Linear Algebra and Optimization (Off Campus Course)
Optimization (Off Campus Course)
Study Oriented Projects
Design Projects
Special Projects

Courses Taught

IInd Semester 2023-24:

EEE G592 Mobile and Personal Communication
ECE/EEE/INSTR F243 Signals and Systems

Ist Semester 2023-24:

ECE/EEE F434 Digital Signal Processing
EEE G614 Advanced Wireless Communications

IInd Semester 2022-23:

EEE G592 Mobile and Personal Communication
ECE/EEE/INSTR F243 Signals and Systems

Ist Semester 2022-23:

EEE F434 Digital Signal Processing
EEE G614 Advanced Wireless Communications
EEE G641 Applied Estimation Theory

Summer Semester 2021 & 2022:

EEE F311 Communication Systems
BITS F221 Practice School-1 (PS-1)

IInd Semester 2021-22:

EEE G592 Mobile and Personal Communication
EEE/INSTR F243 Signals and Systems (T)
EEE/INSTR F244 Microelectronic Circuits (T)
EEE F111 Electrical Sciences (T)

Ist Semester 2021-22:

EEE F472 Satellite Communication
EEE/CS/INSTR F215 Digital Design (T)
EEE F111 Electrical Sciences (T)

IInd Semester 2020-21:

EEE G592 Mobile and Personal Communication
EEE F111 Electrical Sciences (T)

Ist Semester 2020-21:

EEE/CS/INSTR F215 Digital Design (T)
EEE F111 Electrical Sciences

Teaching

UG Courses

Sr. No.	Course Code	Subject	Role
1.	BITS F110	Engineering Graphics	Instructor In-Charge
2.	ME/MF 342	Computer Aided Design	Instructor In-Charge
3.	ME/MF F314	Design of Machine Elements	Co-Instructor
4.	ME F211	Mechanics of Solids	Tutorial Instructor
5.	ME F218	Advanced Mechanics of Solids	Tutorial Instructor
6.	ME F215	Mechanical Engineering Lab	Co-Instructor
7.	ME F343	Vibrations and Control	Tutorial Instructor
8.	BITS F234	Introduction to Engineering Design	Co-Instructor

PG Courses

Sr. No.	Course Code	Subject	Role
1.	ME G512	Finite Element Methods	Instructor In-Charge
2.	ME G613	Advanced Finite Element Modeling and Analysis	Instructor In-Charge

WILP Courses

Sr. No.	Course Code	Subject	Role
1.	DE ZG622	Computer Aided Analysis and Design	Instructor In-Charge
2.	DE ZG613	Finite Element Method	Instructor In-Charge

Courses Taught

· AAOC C111 (Probability and Statistics)

· AAOC C222 (Optimization)

· AAOC C312 (Operations Research)

· BITS F114 (General Mathematics II) Calculus, Complex Analysis, Differential Equation

· BITS F343 (Fuzzy Logic and Applications)

· MATH C111 (Mathematics 1)

· MATH C241 (Mathematics III-Differential Equations and its Applications)

· MATH C311/MATH F311 (Introduction to Topology)

· MATH F111 (Mathematics I)-Calculus

· MATH F112 (Mathematics II)-Linear Algebra and Complex Analysis

· MATH F113 (Probability and Statistics)

· MATH F211 (Mathematics III-Differential Equations and its Applications)

· MATH F212 (Optimization)

· MATH F242 (Operations Research)

· MATH F353 (Statistical Inference and Applications)

· MATH ZC111 (Probability and Statistics)

· MATH ZC222 (Optimization)

· MF F344 (Engineering Optimization)

· POWAB ZC 242/POWTP ZC 242/POWJS ZC 242 (Linear Algebra & Optimization)

· POWAB ZC234 (Linear Algebra & Optimization)

Courses & Labs

List of courses and labs that I am teaching/ have taught in BITS Pilani, Goa:

Advanced Engineering Mathematics (ME G535)
Engineering Graphics (BITS F110)
Mechanical Equipment Design (ME F451)
Product Design (DE G531)
Material Science and Engineering Lab (ME F216)
Vibrations and Control (ME F319)
Engineering Optimization (ME F320/ ME F344)

Teaching Interests

Development Economics

Political Economy of Development

Public Policy

Business Economics

Managerial Economics

Money & Banking

Public Finance

Courses

Lectures

BITS F111 Thermodynamics

ME F420 Power Plant Engineering

ME G515 Computational Fluid Dynamics

ME F323 Energy Storage Technologies

ME F485 Numerical Techniques for Fluid Flow and Heat Transfer

Tutorials

BITS F111 Thermodynamics

ME F220 Heat Transfer

ME F217 Applied Thermodynamics

ME F341 Prime Movers and Fluid Machines

ME F317 Engines, Motors and Mobility

Labs

ME F220 Heat Transfer

ME F217 Applied Thermodynamics

ME F341 Prime Movers and Fluid Machines

ME G512 Finite Element Methods

ME G515 Computational Fluid Dynamics

Courses

List of Courses taught at Undergraduate level (First Degree - FD)

Chemical Process Calculations
Fluid Flow Operations (Fluid Mechanics)
Heat Transfer Operations
Mass Transfer Operations (Separation Processes)
Mechanical Operations
Chemical Engineering Thermodynamics
Process Design Principles
Pollution Control & Safety Management
Chemical Process Industries (Technology)
Chemical Engineering Laboratory
Computer Programming
Environmental Studies
Interpersonal Skills

List of courses taught at Master's/PhD level (Higher degree)

Environmental Chemistry
Environmental Management Systems
Coating and Thin film technology

Courses taught

General Chemistry: Basic chemistry for first year undergraduate students
Chemistry Laboratory: A practical course that gives exposure to undergraduate students on various aspects of Chemistry experimentation
Organic Chemistry-I: Fundamental Organic chemistry
Chemical Experimentation Lab-I: Basic Organic Laboratory Techniques
Organic Chemistry-II: Stereochemistry and Reaction Mechanism
Instrumental Methods of Analysis: Spectroscopy and Analytical Techniques
Organic Chemistry-III: Synthetic Organic Chemistry
Organic Chemistry-IV: Heterocyclic Chemistry and Natural Products

Advanced Heterocyclic Chemistry (for Ph. D students)

Physical Methods in Chemistry (for Ph.D. students)

TEACHING EXPERIENCE

Designation	Organization	Duration
Associate Professor	BITS,Pilani- Dubai	From 2018 onwards
Associate Professor	Annamalai University, India.	16 years
Lecturer	MNM Jain Polytechnic,Chennai,India	2years

COURSES TAUGHT:

B.E COURSES:

1. CONTROL SYSTEMS

2. ADVANCED PROCESS CONTROL

3. ADAPTIVE CONTROL

4.FUZZY LOGIC & ITS APPLICATIONS

5.NEURAL NETWORKS & FUZZY LOGIC

6. COMPUTER CONTROL OF PROCESSES

5.PROCESS DYNAMICS AND CONTROL

6.MEASUREMENT TECHNIQUES-II

7. ELECTRICAL SCIENCE

8.ANALOG ELECTRONICS

9.INDUSTRIAL INSTRUMENTATION & CONTROL

10. ELECTRONIC INSTRUMENTS & ISTRUMENTATION TECHNOLOGY

M.E COURSES:

1. INTRODUCTION TO ARTIFICIAL NEURAL NETWORKS

2. CONTROL & INSTRUMENTATION SYSTEMS

SOFTWARES TAUGHT:

MATLAB(CONTROL SYSTEMS,NEURAL NETWORKS,FUZZY LOGIC,SIM MECHANICS),

ELECTRONIC WORKBENCH,

MULTISIM,TUTSIM

LABS :

TRANSDUCER & CONTROL SYSTEM LAB

SIGNAL CONDITIONING LAB

INSTRUMENTATION LAB

MODELING AND SIMULATION LAB

ELECTRONIC MEASUREMENTS LAB

ELECTRONIC INSTRUMENTS AND INSTRUMENTATION TECHNOLOGY LAB

DIGITAL DESIGN LAB

COMMUNICATION LAB

PROCESS DYNAMICS AND CONTROL LAB

MECHATRONICS AND AUTOMATION LAB

Course Taught

Dynamics of Social Change
Introduction to Anthropology
Introduction to Gender Studies
Technical Report Writing
Sanitation Governance, Behavioural Change and Advocacy

Courses

Inorganic Chemistry II
Solid State Chemistry
General Chemistry
Chemistry Laboratory
Advanced Inorganic Chemistry
Chemistry Project Lab
Chemistry Experimentation Lab
Instrumental Methods of Analysis

Courses Taught

Advanced Heat Transfer (ME G631)
Heat Transfer (ME F220)
Thermodynamics (BITS F111)
Engineering Graphics (BITS F110)
Fluid Mechanics (ME F212)
Aircraft Propulsion (AN F312)
WILP Mechanical Technology (ENGG ZC243)
Microfluidics and its applications (ME F423)

Teaching Interest

Digital Marketing
Digital Analytics
Marketing Management
Consumer Behaviour
Analytics for Competitive Advantage
Business Analytics
e-Business and Internet Marketing
Management Information Systems
Marketing Research
Brand Management

Teaching

Laboratory Developed:

Condition Monitoring Laboratory

Courses Developed:

Tribology
Vibration and Control
Vibration and Acoustics
Machine Learning for Mechanical Engineers

Teaching in Current Semester

Dynamics and Vibration (PG)
Tribology (PG)

Courses Taught

Vibration and Control	(On-Campus: UG)
Vibration and Acoustics	(On-Campus: UG)
Kinematics and Dynamics of Machinery	(On-Campus: UG)
Mechanics of Solids	(On-Campus: UG)
Machine Design	(On-Campus: UG)
Mechanisms and Machines	(On-Campus: UG)
Mechanical Vibration	(On-Campus: UG)
Workshop Practice	(On-Campus: UG)
Engineering Graphics	(On-Campus: UG)
Advanced Mechanics of Solids	(On-Campus: UG)
Dynamics of Machinery and Vibration	(On-Campus: UG)
Advanced Mechanics of Solids and Kinematics	(On-Campus: UG)
Measurement Techniques II	(On-Campus: UG)
Mechanical Engineering Lab	(On-Campus: UG)
Dynamics and Vibration	(On-Campus: PG)(Off Campus: WILP)
Tribology	(On-Campus: PG)
Mechanical System Design	(On-Campus: PG) (Off Campus: WILP)
Design Projects	(On-Campus: PG)
Material Testing and Technology	(On-Campus: PG)

Course Taught

Courses Taught at BITS Pilani - (ON-CAMPUS/OFF-CAMPUS (Work Integrated Learning Program))

Higher Degree Programs

Streams/ Branch Subjects (Code)

Manufacturing Systems and Engineering: Quality Control Assurance and Reliability (ME F443, MGTS F432), Total Quality Management (MSE ZG522), Mechatronics (ESLT ZG511)

Mechanical and Design Engineering: Mechanism and Robotics (ME G511)

First Degree Programs

Streams/ Branch Subjects (Code)

Manufacturing Engineering: Mechatronics and Automation (MF F311), Quality Control Assurance and Reliability (MF F443)

Mechanical Engineering: Robotics (EAC 441), Mechanism and Robotics (MEG 551), Work Shop Technology (TAC 112), Quality Control Assurance and Reliability (ME C443), Engineering Optimization (ME F344)

Engineering Technology: Quality Control Assurance and Reliability (ET ZC432)

Interdisciplinary: Optimization Technique (AAOC 222), Operations Research (AAOC 312)

Teaching Experience

2001-2002 Teaching assistant for the course - Introduction to Biomedical Engineering, Worcester Polytechnic Institute (WPI), USA

2004-2007 Supervision of undergraduate thesis projects, Penn State University, USA

2007-2007 Instructed lectures on hypothesis testing in the course - Statistics and Data Analysis, Lebanon Valley College, PA, USA

2008-2008 Course in College Teaching Certificate, Penn State University, USA

2008-2008 Teaching with Technology Certificate, Penn State University, USA

2006-2008 Graduate School Teaching Certificate, Penn State University, USA

2014-2018 Literature seminars in the role of vasculature in CNS diseases, Masters in Molecular Medicine, Goethe University, Frankfurt, Germany

2012-2022 Practical course for the isolation and culture of primary NVU cells, Masters in Molecular Medicine, Goethe University, Frankfurt, Germany

2018-2022 Practical course for flow cytometry-based isolation of NVU cells, Masters in Molecular Medicine, Goethe University, Frankfurt, Germany

2016-2022 Practical course for assessment of barrier permeability using impedance spectroscopy, Masters in Molecular Medicine, Goethe University, Frankfurt, Germany

2020-2022 Moderation of weekly progress reports and journal clubs in neurovascular research online, VidYO platform, Edinger Institute, Goethe University, Frankfurt, Germany

Teaching/Academic Assignments

Currently teaching in II- Semester 2022-23 (https://nalanda-aws.bits-pilani.ac.in/))

Power System
Smart Grid for Sustainable Energy

Courses Taught (on-campus and off-campus)

Power System
Control System
Electro-mechanical Energy Conversion
Electrical and Electronics Technology
Electrical Science-I
Electrical Science-II
Power Apparatus and Networks
Electromagnetic Fields and Waves
Electrical Machines
Instrumentation and Control
Electronic Instruments and Instrumentation Technology
Electronics and Microprocessor
Power System Control and Operation
Power System Engineering-I
Power System Engineering-II

New Courses /Labs Developed: (On- Campus)

Smart Grid for Sustainable Energy (3 Credit course)
Neural Network and Fuzzy Logic (with Prof. Surekha Bhanot, 3 Credit course)
Electrical and Electronics Circuit Lab (2 Credit course)
New Electrical Machines Lab (Team Leader for the establishment of state of the art lab, Funded by Sh. K. K. Gupta, BITS Pilani Alumnus)

New Programmes/Courses /Labs Developed: (Off- Campus)

Programme committee member for B.Tech. (Power Engineering)
Core Team Member for Developing "Remotely operated electrical machines and instrumentation lab".
Lab Manual for "Instrumentation and Control" course for WILP students
Developed a certificate programme on "Energy Conservation"

Book authored/customised

Basic Electrical Engineering, Pearson Education, 2011. (Customised)

Teaching/Academic Assignments

Teaching/Academic Assignments

Courses Taught / Teaching

Technical Communication for M.E. Students
Technical Report Writing
Effective Public Speaking
Comparative Indian Literature
Critical Analysis of Literature and Cinema
Contemporary India
Theatre Art Acting and Production (I/C)
English Literary Forms and Movements
Business Communication

Member, Indian Women Network of CII
Member, Indian Society for Commonwealth Studies
Life member – Comparative Literature Association of India.
Life Member – English Language Teachers Association of India
Member – Osmania University Centre for International Programmes
Member – Muse India
Member – ELTAI Literature Special Interest Group
Member – FICCI FLO

Higher Degree - Courses

Corporate Finance
Security Analysis & Portfolio Management
Accounting for Managers
Financial Statement Analysis & Reporting

First Degree - Courses

Financial Management
Security Analysis & Portfolio Management
Fundamentals of Finance and Accounting
Money Banking and Financial Markets

Academic Courses

1st Semester 2023-24

Engine Motors and Mobility (ME F317)
Fluid Mechanics (ME F212)
Thermodynamics (BITS F111)

2nd Semester 2023-24

Automotive Vehicles (ME F441)
Mechanical Technology (ENGG ZC243)

2023-24, Sem-2

Power Systems | EEE F312
Control Systems | EEE F242/ ECE F242/ INSTR F242

Teaching

Electromagnetic Theory-1
Mechanics, Waves and Oscillations (tutorial)
Physics Lab
Laser Physics and Applications
Advance Physics Laboratory

Courses Handled

Data Structures and Algorithms
Computer Architecture
Compiler Construction
Data Mining
Operating Systems

Off Campus courses

1st Sem, 2021-22: WILP: Digital Electronics and Microprocessor (ES ZC263) (IC)

On campus courses

2nd sem, 2020-21: Electrical Science (EEE F111) (Instructor)
1st Sem, 2021-22: Analog and Digital VLSI Design(F313) (Instructor)
2nd sem, 2021-22: Electrical Science (EEE F111) (Instructor), Analog Electronics Laboratory (F341) (instructor)
1st Sem, 2022-23: VLSI Design (MEL G621) (IC), Digital Design Laboratory (CS/ECE/EEE/INSTR F215)
2nd sem, 2022-23: Analog Electronics Theory (EEE/ECE/INSTR F341) (instructor)
1st Sem, 2023-24: VLSI Design (MEL G621) (IC)

Courses Taught in UG & PG Level

UG Courses (On Campus)

Production Techniques-I (ME F243)
Production Techniques-II (ME F313)
Casting and Welding (MF F343)
Metal Forming and Machining (MF F313)
Computer Aided Manufacturing (ME F432)
Tool and Fixture Design (MF F312)
Manufacturing Processes (ME F219)
Computer Aided Design and Manufacturing (MF F317)
Workshop Practice (ME F112)

PG Courses (On Campus)

Flexible Manufacturing Systems (BITS F431/ EA C412)
Machine Tool Engineering (ME G532)
Computer Integrated Manufacturing (ME G539)
Manufacturing Planning & Control (MSE G512)

UG Courses (Off Campus)

Flexible Manufacturing Systems (EA ZC412/ MM ZC412)
Materials Management (ET ZC 342)
Manufacturing Organization and Management (MM ZG511)
Manufacturing Processes (ET ZC235/PE ZC236)

Academics

Subjects/courses taught: Undergraduate Level

Environmental Pollution Control	Mass Transfer Operations
Process Design Principles I	Process Design Decisions
Kinetics and Reactor Design	Process Design Principles II
Unit Operations	Fluid flow operations
Process Control	Biochemical Engineering
Selected Chemical Engineering Operations	Process Equipment Design
Process control and Instrumentation	Measurement Techniques II

Post Graduate Level

Environmental Systems Modeling	Advanced Mass Transfer
Computational Transport Phenomenon	Advanced Separation Processes
Air Pollution Control Technologies	Environmental Management Systems

Courses /Programe Developed /updated

Developed a course on Environmental Systems Modeling for M E environmental Engineering, at BITS Pilani K K Birla Goa campus 2015
Developed a course on Air Pollution Control Technologies for M E environmental Engineering, at BITS Pilani K K Birla Goa campus 2015
Curriculum Development for M E environmental Engineering programme, for employees of Goa State Pollution Control Board, at BITS Pilani K K Birla Goa campus 2014.
Developed (along with senior colleague) a course on Environmental Management Systems for M.E. Chemical Engg. students at BITS Pilani, Rajasthan
Developed (along with senior colleagues) a course on Separation Technology for M.E. Chemical Engg. students at BITS Pilani, Rajasthan
Developed (along with senior colleague) Environmental Engineering Laboratory in chemical engineering department at BITS Pilani, Rajasthan
Introduced the process plant simulation software (Aspen Plus/Chem-CAD) for the course CHE F314-Process Design Principles I, at BITS Pilani, K K Birla Goa Campus Goa

Courses delivered to Industry and Faculty of other Institutes

Convener of the “CHEMFERENCE 2023”, A National Level Conference held at BITS Pilani K K Birla Goa Campus Goa during 30^th September – 2^nd October 2023.
Coordinator for two day workshop on Process Modeling and Simulation for Industries and academicians during 21^st-22^nd December 2017 at KK Birla Goa Campus. Forty participants from various industries and universities participated in the workshop.
Coordinator for two day workshop on Environmental Management Systems for Industries in Goa on 20^th October and 21^st October 2016 at KK Birla Goa Campus. This workshop was organized in collaboration with Goa State Pollution Control Board Goa. Fifty participants from various industries across Goa participated in the workshop.
Conducted workshop on “Environmental Management and Audit” for faculty across various Institutions at Dept of Chemical Engg at Padmashri Dr. Vitthalrao Vikhe Patil Institute of Technology and Engineering (Polytechnic) Pravaranagar during 25^th Feb 2013 to 1^st March 2013.
Guided a project to group of employees ( 8 no) during Academic Refresher Course Programme – II for the employees of Hindustan Zinc Ltd. Udaipur BITS, Pilani, Rajasthan October 2004- November 2004.
Intensive Course (along with other faculty colleagues) on Novel Separation Techniques and their application to Indian Chemical Industries for industry delegates at BITS, Pilani, Rajasthan, March 21-23,2001.

Contributions To Continuing Education Programme (Short-Term Courses Etc.)

Track Chair for the theme on Environmental Management Systems in 11^th ISDSI (Indian Subcontinent Decision Sciences institute) International Conference to be held at IIM Trichy, during December 27-30, 2017.
Member of Scientific Advisory Board for The 12^th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference, to be held in Dubrovnik, Crotia, during October 4-8 2017
Member of Programme committee for 10^th ISDSI International Conference held at Nasik during December 28-30, 2016.
Convener of the Seminar Engineering Solutions to Combat Climate Change organized on Engineers Day, 15^th September, 2009 at BITS, Pilani, Goa Campus
Convener of the Seminar The Planet Earth organized on Engineers Day, 15^th September, 2008 at BITS, Pilani, Goa Campus.
Convener of the Seminar Technological Innovations for Sustainable Development organized on Engineers Day, 22^nd September, 2006 at BITS, Pilani, Goa Campus.
Co-organised National Conference on Energy Management in Changing Business Scenario(EMCBS-2005), 8-9 October 2005 at BITS, Pilani
Co-organised Seminar Cum Intensive Course on Novel Separation Techniques and their application to Indian Chemical Industries, (March 21-23,2001) at BITS, Pilani
Co-organised National seminar cum short term course on Environmental Pollution and Its Control (NSIC ‘99), (March 11-13,1999) at BITS, Pilani

Short Term Courses/Workshop/Seminar Etc. Attended

Participated in the workshop on ‘Air quality management to develop local action plans’ under the EU Funded Project on ‘A Collaborative Approach to Further Improve Air Quality in Indian Cities’ on 16th September, 2017 at Taj Vivanta, Panaji, Goa
Attended Brain Storming Session on Environmental Geotechnics organized by IIT Bombay under the aegis of SERB and DST on 24th -25 Jan 2017 at Goa.
2^nd International Hydrogen and Fuel Cell Conference organized by Hydrogen Association of India, held at Cidade de Goa in Panji, Goa during 1-3 December 2013.
International Conference on “Water Security on Sustainable Basis” held at Mazorda, Goa, on 24-25^th August 2012.
Two days workshop on “Patent Search, Documentation, Drafting and Infringement Analysis” held at BITS, Pilani on 3^rd and 4^th March 2006.
Four days short term course on “Air quality Monitoring and Management” held at Ghaziabad U.P. from 9th to 12th August, 2000.

Courses

2018-2019 (2nd Sem)IS-F462: Network Programming
2019-2020 (1st Sem)CS-G525: Advanced Computer Networks
2019-2020 (2nd Sem)IS-F462: Network Programming
2020-2021 (1st Sem)CS-G525: Advanced Computer Networks
2020-2021 (2nd Sem)CS-F441 (Selected Topics): Reinforcement Learning
2020-2021 (2nd Sem)IS-F462: Network Programming
2021-2022 (1st Sem) CS-F317: Reinforcement Learning
2021-2022 (2nd Sem) BITS-F464: Machine Learning
2022-2023 (1st Sem) CS-F425: Deep Learning
2022-2023 (2nd Sem)CS-F317: Reinforcement Learning
2023-2024 (First Sem) CS-F425: Deep Learning

Courses Taught in BPDC

Thermodynamics

General Chemistry

Chemistry laboratory

Environmental Sciences

Environment, Development and Climate Change

Instrumental Methods of Analysis

Biological Chemistry

Biochemical Engineering

Corrosion Engineering

Coursework and Curricula

Current Courses

General Biology (BIO F111): Course for the first-degree students
Advanced Recombinant DNA Technology (BIO G561): Course for the higher-degree students
Introduction to Bioinformatics (BIO F242): Course for the first-degree students

Previous Courses

Summer Semester module for Master in Life Sciences (MP56): Biochemistry of Apicomplexan Parasites; 14 lectures, 2-week practical course and journal club (Humboldt University, Berlin)
Summer Semester module for Master in Life Sciences (MB-A05): Cell Biology of Parasites; 14 lectures, 2-week practical course and journal club (Humboldt University, Berlin)
Winter Semester module for Master in Life Sciences (MB-A04): Molecular Manipulation of Parasites 2-week practical (Humboldt University, Berlin)

Subjects

Subjects Handled :

1st Semester 2022-23 (Current Semester)

Artificial Intelligence (UG)

Object Oriented Programming (UG)

Cloud Computing PG - M.E (System Software)

Undergraduate

Artificial Intelligence

Database Systems

Data Structures

Object Oriented Programming

Microprocessor Programming and Interfacing

Computer Programming

Data Structures and Algorithms

Digital Design and Computer Organization

Computer Graphics

Compiler Construction

Post Graduate

Cloud Computing (ME)

Object Oriented Analysis and Design (ME)

Network Security. (ME)

Internet Security and Cyber Laws (MBA)

Management Information Systems (MBA)

Enterprise Resource Planning (MBA)

LABS Handled :

Java Programming Lab

Data Structures Lab

Database Systems Lab

Computer programming I and II Lab

Object Oriented Analysis and Design Lab

Microprocessor Programming and Interfacing Lab

Computer Networks Lab

Computer Architecture Lab

Compilers Lab

WILP Course ( Course Content delivered online)

Database Systems and Applications

Certification Received

Received Artificial Intelligence Analyst 2020- Explorer and Mastery Award from IBM in August 2020

Courses Taught

Undergraduate

Production Techniques
Tribology
Precision Engineering
Workshop Practice Course
Quality Control, Assurance & Reliability
Engineering Graphics
Maintenance & Safety

Postgraduate

Machine Tool Engineering
Quality Control, Assurance & Reliability

Courses

Thermodynamics

Materials for Energy Applications

Biochemical Engineering

Chemical Engineering Thermodynamics

Engineering Chemistry

General Chemistry

Environmental Studies

Chemistry Laboratory

Courses

Structural Engineering Courses:

CE G614 Prestressed Concrete Structures
CE G613 Advanced Concrete Structures

Construction Materials Courses:

CE F230 Civil Engineering Materials
CE G562 Advanced Concrete Technology

Construction Management Courses:

CE G527 Construction Management
CE G538 Project Planning & Management

Teaching

Courses

1. Anatomy, Physiology & Hygiene

2. Molecular Biology & Immunology

3. Advanced Pharmacology

4. Clinical Research

Teaching

Fluid Mechanics

Biochemical Engineering

Chemical Engineering Thermodynamics

Research Methodology

Modelling and Simulation in Chemical Engineering

Numerical Methods for Chemical Engineering

Courses

Mathematics - I
Mathematics - II
Mathematics - III
General Mathematics - II
Partial Differential Equations
Numerical Methods for PDEs
Linear Algebra and Optimisation

Courses

Thermodynamics (BITS F111)
Chemical Engineering Thermodynamics (CHE F212)
Process Design Principles I (CHE F314)
Process Design Principles II (CHE F343)
Introduction to Nanoscience & Technology (CHE G528)
Research Methodology (BITS G661)
Separation Processes I (CHE F244)
Chemical Engineering Lab I (CHE F312)
Chemical Engineering Lab II (CHE F341)

Research Interest

Natural Language Processing
Machine Learning and Deep Learning
Data Mining and Knowledge Discovery
Consumer Perception and Information Systems

Research Interest

Courses

Deep Learning in Business
Database Management and Warehousing
Big Data Analytics

Courses Taught

First degree courses

Chemistry - I

Chemistry - II

Measurement techniques - I

Instrumental methods of analysis

Chemistry of inorganic compounds

Chemistry project lab

Bonding in inorganic compounds

Structure and properties of materials

General chemistry

Chemistry laboratory

Inorganic chemistry – I

Inorganic chemistry – II

Electrochemistry: Fundamentals and applications

Higher Degree courses

Advanced inorganic chemistry

Bioinorganic chemistry

Courses

1. General Chemistry (CHEM F111)

2. Physical Chemistry-I (CHEM F211)

3. Physical Chemistry-IV (CHEM F312)

4. Electrochemistry Fundamentals and Applications (CHEM F327)

5. Photochemistry and Laser Spectroscopy (CHEM F412)

6. Chemistry Laboratory (CHEM F110)

7. Instrumental Methods of Analysis Lab (CHEM F313)

8. Chemistry Laboratory-2 (CHEM F341)

9. Thermodynamics (BITS F111)

10. Advanced Physical Chemistry (CHEM G553)

Courses

1. General Chemistry (CHEM F111)

2. Physical Chemistry-I (CHEM F211)

3. Physical Chemistry-IV (CHEM F312)

4. Electrochemistry Fundamentals and Applications (CHEM F327)

5. Thermodynamics (BITS F111)

6. Photochemistry and Laser Spectroscopy (CHEM F412)

7. Chemistry Laboratory (CHEM F110)

8. Instrumental Methods of Analysis Lab (CHEM F313)

9. Chemistry Laboratory-2 (CHEM F341)

1. General Chemistry (CHEM F111)

2. Physical Chemistry-I (CHEM F211)

3. Physical Chemistry-IV (CHEM F312)

4. Electrochemistry Fundamentals and Applications (CHEM F327)

5. Thermodynamics (BITS F111)

6. Photochemistry and Laser Spectroscopy (CHEM F412)

7. Chemistry Laboratory (CHEM F110)

8. Instrumental Methods of Analysis Lab (CHEM F313)

9. Chemistry Laboratory-2 (CHEM F341)

Courses Taught/Teaching

First Degree Programme:

ECON F342: Applied Econometrics
ECON F345: Behavioral Economics
ECON F241: Econometrics Methods
FIN 414: Financial Risk Analytics & Management
ECON F314: Industrial Economics
ECON F213: Mathematical and Statistical Methods
ECON F242/C311: Microeconomics
ECON F211: Principles of Economics
ECON F341: Public Finance: Theory and Practice
ECON C421: Issues in Indian Economy
ECON C342: Econometrics
ECON G531: Theory of Macroeconomic Policy
FIN F451: International Business

Higher Degree Programme:

MGTS G521: Business Policy, Structure and Organization
MBA C413: Quantitative Methods
BITS G644: Development and Use of Computer Software

Courses Taught

Postcolonial Literature
Contemporary Indian English Fiction
Popular Literature and Culture of South Asia
Heritage of India
Comparative Indian Literature
Critical Analysis of Literature and Cinema
Shankara's Thoughts
Technical Report Writing
Technical Communication (M.E & WILP)

Currently Teaching

Sankara's Thoughts
Technical Report Writing

Curriculum Development

Designed and developed the course Contemporary Indian English Fiction.

Courses Taught at BITS Pilani Hyderabad Campus

Regular Courses:

BITS F218: General Mathematics - III
MATH F111: Mathematics - I
MATH F112: Mathematics - II
MATH F113: Probability & Statistics
MATH F211: Mathematics - III
MATH F215: Algebra - I
MATH F231: Number Theory
MATH F241: Mathematical Methods
MATH F312: Ordinary Differential Equations

Project Courses:

BITS F421T / 422T / 423T / 424T: First Degree Thesis (FDTS)
MATH F266: Study Oriented Project (SOP)
MATH F366: Lab Oriented Project (LOP)
MATH F376 / F377: Design Project (DP)

WILP Courses:

PEAB ZC113: Probability & Statistics
BA ZG524: Applied Statistical Methods
PSDRL ZC235: Linear Algebra & Optimization
PSDRL ZC114: General Mathematics - II
AAOC ZC111: Probability & Statistics
BSPS ZC111: Probability & Statistics

PhD Courses:

BITS G649: Reading Course
BITS G513: Study in Advanced Topics
BITS G529: Research Project - I
BITS G539: Research Project - II
BITS G540: Research Practice
BITS G791T: Teaching Practice - I
BITS C797T: PhD Seminar
BITS C799T: PhD Thesis

Courses

Computational Fluid Dynamics (Undergraduate + Postgraduate)
Finite Element Method (Undergraduate + Postgraduate)
Advanced Engineering Mathematics (Postgraduate)
Fluid Mechanics (Undergraduate)
Fluid Dynamics (Postgraduate)
Prime-Movers & Fluid-Machines (Undergraduate)
Engineering Graphics (Undergraduate)

Teaching

CHEM F111 : General Chemistry
CHEM F110 : Chemistry Laboratory
CHEM F313 : Instrumental Methods of Analysis
CHEM F341 : Chemical Experimentation II
CHEM G552 : Advanced Inorganic Chemistry

Teaching

Courses Taught

PHY F110: Physics Laboratory

Waves, Mechanics and Optics

PHY F111 - Mechanics Oscillations and Waves Tutorial

Concepts, methodology and Problem solving

Design & Study Projects Offered

PHY F376: Simulation of Quantum processes for Quantum Materials & Interfaces

Design & Modeling for Quantum Computing

PHY F376: Computational study of Quantum processes in Nanotubes

Design and Modeling for Electronic Device applications

PHY F491: Predictive simulation of Transport properties of Surfaces and Interfaces

Data assisted Modeling for Energy applications

PHY F491: Data-assisted Computational Design and Simulation of material properties

Data assisted Materials Discovery

Courses

PHY C131: Physics 1
PHY C132: Physics 2
PHY F112: General Physics
TA C211: Measurement Technique 1
PHY C391: Instrumental Methods of Analysis
PHY C311: Electro Magnetic Theory I
PHY C411: Electro Magnetic Theory II
PHY C351: Methods of Experimental Physics
PHY F110: Physics 1 Lab
PHY F344: Adv. Physics Lab
PHY F111: Mechanics, Wave and Oscillations
PHY F213: Optics

Courses Taught / Teaching

General Biology (BIO C111 and BIO F111)
Measurement Techniques-I (TA C211)
Microbiology (BIO C241 / BIO F212)
Biology Project Lab (BIO C231; BIO F231)
General Physiology (BIO C342)
Plant Physiology (BIO F312)
Laboratory (BIO C411 / BIO F411)
Plant Biotechnology (BIO G643)
Cell & Tissue Culture Technology (BIO G641)
Advance and Applied Microbiology (BIO G523)
Study Oriented Project (BITS C324)
Lab Oriented Project (BITS C313)
Professional Practice I (BITS G620)
Professional Practice II (BITS G621)
Study in Advanced Topics (BITS G513)
Advanced Projects (BITS G511)
Research Practice (BITS G540)
Special Project (BIO F491)

Courses

1. MATH F113: Probability and Statistics (Even Semester 2020-21, 2021-22, 2022-23, 2023-24)

2. MATH F113: Probability and Statistics (Summer Course 2021)

3. MATH F111: Mathematics I (Odd Semester 2021-22)

4. MATH F432: Applied Statistical Methods (Odd Semester 2021-22, 2022-23)

5. MATH F266, F366, F376: Study Oriented, Lab and Design Projects (Odd Semester 2021-22, 2022-23; Even Semester 2021-22)

6. MATH F353: Statistical Inference and Applications (Even Semester 2022-23, 2023-24)

7. MATH F424: Applied Stochastic Processes (Odd Semester 2023-24)

8. BA ZG524 (WILP): Advanced Statistical Methods (Even Semester 2022-23)

Courses teaching/taught

Mathematics I (Multivariable Calculus), Fall 2022.
Differential Geometry, Spring 2023.
Mathematics I (Multivariable Calculus), Fall 2023.
Gen Math II, Spring 2024.
Gen Math I (WILP course), Spring 2024.

Courses Taught

BITS Pilani, Hyderabad Campus (2020 - Present)

[Feedback Score ranges from 8.73 to 10. Average Feedback Score = 9.74. Average % of students giving feedback = 55%]

- CHE F242: Numerical Methods for Chemical Engineers
- CHE F314: Process Design Principles-1
- CHE F343: Process Design Principles-2
- CHE G558: Chemical Process Optimization
- BITS F111: Thermodynamics
- CHE F341: Chemical Engineering Laboratory II

National University of Singapore (2014-2018)

- Completed Training Programme for Teaching Assistants organized by Centre for Development of Teaching & Learning (CDTL), NUS, 2017
- Tutor for Undergraduate (B.Eng.) course: Process Synthesis and Simulation [Average Feedback Score = 3.87 out of 5]
- Grader for Undergraduate (B.Eng.) course: Design Project
- Appointed Grader in the B.Tech. Programme: Pinch Analysis and Process Integration
- Appointed Graduate Tutor cum Laboratory Assistant in the B.Tech. Programme: Process Synthesis and Simulation

IIT Bombay (2012-2014)

- Tutor for Postgraduate course: Computational Methods in Chemical Engineering

Courses Taught

Transport Phenomena

Hydraulics and Fluid Mechanics

Hydraulic Engineering

Application of AI in Civil Engineering

Hydrology & Water Resources

Introduction to Finite Element Method

Environmental Studies

Finite Element Analysis (G)

Quantitative Methods (WILP, G)

Environmental Statistics (WILP, G)

Engineering Graphics Lab

Measurement Techniques II Lab

Geodesy/Surveying Lab

Water and Wastewater Engineering Lab

Hydraulics and Fluid Mechanics Lab

Hydraulic Engineering Lab

Teaching

BITS Pilani Hyderabad Campus

Applied Econometrics
Econometric Methods
Time Series Analysis & Forecasting
Computational Methods for Economics
Mathematical and Statistical Methods
Principles of Economics
Indian Economic Development
Marketing Research

PhD Courses: Study in Advanced Topics, Research Project, Research Practice, Reading Course, Teaching Practice, PhD Seminar & PhD Thesis.

Project Courses: Special Project, Study Oriented Project, Lab Oriented Project & Design Oriented Project.

TISS, Hyderabad Campus

Impact Evaluation
Philosophy and Methods of Social Research
Foundation of Data Analysis
Theories of Economic Development
Theories of Development

Courses Taught at BITS Pilani

Power System Engineering-II (WILP-Theory)
Signals and Systems (Theory+ Tutorial)
Electrical Machines (Theory+ Tutorial+ Lab)
Modern Control Systems (Theory)
Control Systems (Theory+ Tutorial)
Electrical Sciences (Theory+ Tutorial)
Electrical and Electronics Circuits (Lab)
Smart Grid for Sustainable Energy (Theory)
Study/Design/Laboratory Oriented Projects
Electrical and Electronics Technology (WILP-Theory)

Teaching

MT1 Lab, Quantum Optics, Laser Science and Technology, Atomic and Molecular Physics, Electromagnetic Theory

2023-2024

Semester 1

Optical Communications [EEE G591]
Digital Design [CS/ECE/EEE/INSTR F212]

Semester 2

Microprocessor and Interfacing [CS/ECE/EEE/INSTR F241]

2022-2023

Semester 1

Communication Systems [ECE/EEE F311]
Digital Design [CS/ECE/EEE/INSTR F212]

Semester 2

Microprocessor and Interfacing [CS/ECE/EEE/INSTR F241]

2021-2022

Semester 1

Digital Communications [ECE/EEE F416]
Digital Design [CS/ECE/EEE/INSTR F212]

Semester 2

Advanced Digital Communications [EEE G622]
Microprocessor and Interfacing [CS/ECE/EEE/INSTR F241]

2020-2021

Semester 1

Digital Design [CS/ECE/EEE/INSTR F212]
Optical Communication [EEE G591]

Semester 2

Microprocessor and Interfacing [CS/ECE/EEE/INSTR F241]

Teaching work

Course name: Thermodynamics
Credited by: First year students
Tutorial/Lecture: Tutorial
Course name: Mechanics, Oscillations and Waves
Credited by: First year students
Tutorial/Lecture: Tutorial

Teaching

Courses taken since Aug, 2008 :

General Biology (UG)

Biology Laboratory (UG)

Cell Biology (PG)

Integrative Biology (PG)

Genetics (PG)

Bioprocess Technology (PG/HD, Elective)

Laboratory (PG)

Advanced and Applied Microbiology (HD)

Laboratory Oriented Project (PG)

Study Oriented Project (PG)

Research Practice (HD)

Study in Advanced topics (HD)

First Degree Thesis

Higher Degree Thesis

Research Project I (HD)

Research Project II (HD)

Courses taken in Jan-May Semester, 2015:

General Biology (UG)

Biology Laboratory (UG)

Genetics (I/C, PG)

Research Practice (HD)

Higher Degree Thesis

Courses taken in Aug-Dec Semester, 2015:

General Biology (UG)

Biology Laboratory (UG)

Cell Biology (I/C, PG)

Advanced and Applied Microbiology (I/C, HD)

Study in Advanced topics (HD)

First Degree Thesis

Study Oriented Project (PG)

Courses taken in Jan-May Semester, 2016:

General Biology (UG)

Advanced and Applied Microbiology (I/C, HD)

Study Oriented Project (PG)

Molecular Biology of Cell (I/C, PG)

Research Practice (HD)

Courses taken in Aug-Dec Semester, 2016:

General Biology (UG)

Study in Advanced topics (HD)

Research Project I (HD)

Cell Biology (I/C, PG)

Integrative Biology (I/C, PG)

Courses taken in Jan-May Semester, 2017:

Bioprocess Technology (I/C, PG/HD, Elective)

Advanced and Applied Microbiology (I/C, HD)

Laboratory (PG)

Higher Degree Thesis

Practice Series Lectures I/II

Reading course

Courses taken in Aug-Dec Semester, 2017

Cell Biology (I/C, PG)

General Biology (UG) Lectures & Tutorial

Laboratory (I/C, PG)

Study oriented project

First Degree Thesis

Practice Series Lectures I/II

Courses taken in Jan-May Semester, 2018

Bioprocess Technology (I/C, Elective for PG/HD)

Advanced & Applied Microbiology (I/C, HD)

First Degree Thesis

Study in Advanced topics (HD)

Research Practice (HD)

Research Project I (HD)

Courses taken in Aug-Dec Semester, 2018

General Biology (I/C, UG)

Cell Biology (I/C, PG)

Study in Advanced topics (HD)

First Degree Thesis

Courses in Jan-May Semester, 2019

Bioprocess Technology (I/C, Elective, UG)

Advanced & Applied Microbiology (HD)

Research Practice (HD)

Higher Degree Thesis

Courses Summer term May-July, 2019

Bioprocess Technology (I/C, Elective, UG)

Bioethics & Biosafety (instructor, Elective, UG)

Courses taken in Aug-Dec Semester, 2019

General Biology (Instructor, UG)

Cell Biology (I/C, PG)

Study in Advanced topics (HD)

Courses taken in Jan-May Semester, 2020

Advanced & Applied Microbiology (HD)

Microbiology & Fermentation Technology (New Elective, IC, HD)

Research Practice (HD)

Higher Degree Thesis

First Degree Thesis

Laboratory Oriented Project (PG)

Courses taken in Aug-March Semester, 2020-21

General Biology (Lectures + Tutorial, for UG)

Enzymology (New Elective, I/C, Lectures for HD)

Laboratory Oriented Project (PG)

Research Practice (HD)

Design project (PG)

Reading course

Study in Advanced topics (HD)

Courses taken in March-June Semester, 2021

Advanced & Applied Microbiology (IC, HD, Lectures & Practical)

Higher Degree Thesis

Research Project II (HD)

Research Practice (HD)

Courses to be taken in Aug-Dec Semester, 2021-22

General Biology (Tutorial, for UG; from October, 2021 - February, 2022)

Microbiology & Fermentation Technology (Elective, IC, HD)

Reading course

Study in Advanced topics (HD)

Research Project I (HD)

Courses to be taken in Jan-May Semester, 2022-23

Advanced & Applied Microbiology (IC, HD, Lectures)

Enzymology (Elective, Lectures for HD)

Research Project II (HD)

General Biology (Tutorial, for UG; from October, 2021 - February, 2022)

Research Practice (HD)

Courses to be taken in Aug-Dec Semester, 2022-23

General Biology (Tutorial, for UG; as instructor)

Microbiology & Fermentation Technology (Elective, IC, HD)

Study in Advanced topics (HD)

Research Project I (HD)

Courses to be taken in Jan/Mar-May/Jul Semester, 2022-23

Advanced & Applied Microbiology (HD, Lectures)

Biology Laboratory (IC, UG)

Research Project II (HD)

Courses to be taken in Aug-Dec Semester, 2023-24

General Biology (Lecture + Tutorial, for UG; as instructor)

Integrative Biology (Lecture, I/C, PG)

Research Project I (HD)

Courses to be taken in Jan-May Semester, 2023-24

Bioprocess Technology (PG/HD, Elective)

Research Project II (HD)

Advanced & Applied Microbiology (HD, Lectures)

Research Practice (HD)

Study oriented project (SOP, IC)

Lab oriented project (LOP, IC)

Courses to be taken in Aug-Dec Semester, 2023-24

General Biology (Tutorial, for UG; as instructor)

Integrative Biology (Lecture, I/C, PG)

Research Project I (HD)

Research Project II (HD)

Research Practice (HD)

Teaching

Courses

First Degree (Graduate)

General Biology
Biology Laboratory
Instrumental Methods of Analysis
Genetic Engineering Technique
Cell and Tissue Culture Technology
Developmental Biology
Cell Biology
Biomedical Engineering

Higher Degree (Post Graduate)

Genetic Engineering Technique
Animal Cell Technology
Plant Biotechnology

Higher Degree (Post Graduate)

Research Methodology 1

Project Type Course

SOP (FD)
DOP (FD)
LOP (FD)
SAT (HD)
RP1 (HD)
Thesis (FD)
Dissertation (HD)

Courses offered to Dual Degree M.Sc. Economics & B.Tech. Students

ECON F341 - Public Finance
ECON F211 - Principles of Economics
ECON F434 - International Business
ECON F311 - International Economics
ECON F214 - Economic Environment of Business
MGTS F211 - Principles of Management
FIN F314 - Investment Banking and Financial Services
BITS G524 - Health Economics I (for BITS-One Health Trust PhD Programme Coursework)

Instructor-in-charge for Project Type Courses ECON F266, ECON F366, ECON 367, ECON 376, ECON 377, ECON F491 for three semesters

Teaching

* General Chemistry

* Chemistry Project Lab

* Chemistry Laboratory

* Instrumental Methods and Analysis

* Chemistry of Organic Compounds

* Colloids and Surface Chemistry

* Nanochemistry

Courses

BIO F312-Plant Physiology

BIO G643-Plant Biotechnology

BIO C418- Genetic Engineering Technology

BIO F244- Instrumental Methods of Analysis (laboratory)

BIO G510- Applications of Comp. Appl. and Statistics in Biology (biostatistics portion)

BIO F110-Biology Laboratory

BIO F111-General Biology

BIO G632-Transgenic Technology

BIO G515- Stem cells and Regenerative Medicine (portion on plant stem cells)

BIO C411-Laboratory

Supervised students in the following research/project based courses:

BITS C797T- Ph.D. Seminar
BITS C799T- Ph.D. Thesis
BITS E661- Research Methodolgy-1
BITS G629- Higher degree Dissertation
BITS G540- Research Practice
BITS G513- Study in Advanced Topics
BITS C790T/452T- Independent Study

Teaching

Teaching experience

Training:

Kauffman Teaching Certification Program (KTCP): Completed Kauffman Teaching Certification Program (KTCP) offered by MIT to its post-docs and graduate students in 2018.

Course Design and Development:

Applied Crystallography: A course dedicated to learning the basics of crystallography, crystal engineering, and crystallization from a chemical perspective (to be offered in 2023-24 1^st semester.)

Courses Taught:

Applied Crystallography: A course dedicated to learning the basics of crystallography, crystal engineering, and crystallization from a chemical perspective.

Course Number: CHEM F416

Years: 2023 (as instructor in charge)

Organic Chemistry II: A course focused on stereochemistry and reaction mechanisms in organic chemistry.

Course Number: CHEM F243

Years: 2021, 2022

Chemical Experimentation-I: A course on different laboratory techniques in organic chemistry.

Course Number: CHEM F242

Years: As instructor in-charge: 2021, 2022, 2023

Physical Methods in Chemistry: A course on the application of different physical methods that are used frequently in chemical analysis including spectroscopic, chromatographic, and diffraction techniques.

Course Number: CHEM G554

Years: 2021, 2022

Instrumental Methods of Analysis: A course on the application of different physical methods that are used frequently in chemical analysis including spectroscopic, chromatographic, and diffraction techniques.

Course Number: CHEM F313

Years: 2022 (Practical), 2023 (Practical)

General Chemistry: A basic chemistry course for first-year undergraduate students covering key concepts in physical, organic and inorganic chemistry.

Course Number: CHEM F111

Years: 2021 (Tutorial), 2022 (Tutorial), 2023 (Tutorial)

General Chemistry Lab: A basic lab course for first-year undergraduate students covering some representative experiments in physical, organic, and inorganic chemistry.

Course Number: CHEM F110

Year: 2021, 2022

1. Organic Chemistry II: A course focused uponstereochemistry and reaction mechanism in organic chemistry.

Course Number: CHEM F243

Years: 2021

2. Chemical Experimentation-I: A course on different laboratory techniques in organic chemistry.

Course Number: CHEM F242

Years: 2021 (as instructor in-charge)

3. Physical Methods in Chemistry: A course on the application of different physical methods that are used frequently in chemical analysis including spectroscopic, chromatographic, and diffraction techniques.

Course Number: CHEM G554

Years: 2021, 2022

4. Instrumental Methods of Analysis: A course on the application of different physical methods that are used frequently in chemical analysis including spectroscopic, chromatographic, and diffraction techniques.

Course Number: CHEM F313

Years: 2022 (Practical),

5. General Chemistry: A basic chemistry course for first-year undergraduate students covering key concepts in physical, organic and inorganic chemistry.

Course Number: CHEM F111

Years: 2021 (Tutorial), 2022 (Tutorial)

6. General Chemistry Lab: A basic lab course for first-year undergraduate students covering some representative experiments in physical, organic, and inorganic chemistry.

Course Number: CHEM F110

Year: 2021

7. Lab-oriented Project courses: A short-term research-basedproject coursefocused upon several aspects of crystal engineering.

Course Number: CHEM F366

Years: 2021, 2022

Courses Taught

International Economics

Macro Economics

Indian Economic Development

Energy Economics & Policy

Mathematical & Statistical Methods

Econometric Methods

Principles of Economics

Quantitative Analysis of International Trade

International Business

New Venture Creation

Courses Taught

COURSES TAUGHT ON-CAMPUS

Marketing
Principle of Management
Human Resource Development
Essentials of Organizational Behavior
Essentials of Strategic Management

COURSES TAUGHT OFF CAMPUS (SPECIFIC /NON SPECIFIC)

Principles of Management
Human Resource Management
Strategic Management
Leadership & Change Management
Human Resource Management as a Specific Program for Clients like Mahindra & Mahindra, Vedanta, Cipla , Dr. Reddy

COURSE DEVELOPMENT

Designed and contributed to "Minor in Management" for undergraduate students

CERTIFICATION

Completed course with Certificate in "Gamification" 2023 from Wharton, University of Pennsylvania offered through Coursera.
Completed course with Certificate in “Community change in Public Health" 2021 from Johns Hopkins University
Awarded with “Certified HR Analytics & Metrics Professional” with High Distinction (2016); certified by Carlton Advanced Management Institute and workshop conducted by Middleearthhr.
“Case Method Writing” from IBS Hyderabad
“QDA -Miner and Voyant -content analysis ” from IIT Madras
Structural Equation Modeling from IBS Hyderabad

Courses

B.E. and M.Sc. Biological Sciences Programmes:

BIO F111: General Biology

BIO F110: Biology Laboratory

BIO F243: Genetics

BIO F411: Laboratory

BIO F413: Molecular Biology of Cell

BIOT F346: Genomics

M.E. Biotechnology Programme:

BIO G526: Cancer Biology

BIO G612: Human Genetics

BIO G524: Animal Cell Technology

BIO G542: Advanced Cell & Molecular Biology

BIO G515: Stem Cell & Regenerative Biology

Other Courses:

BIO F266: Study Project

BIO F366: Laboratory Project

BITS G513: Study in Advanced Topics

BITS G540: Research Practice

BITS G629: Dissertation

BITS G529: Research Project

My courses

1) Agency09 should have to Handover the website
2) Maintaence turn on
3) Webmaster training from Agency09
4) Webmaster should be handle Wordpress & other technologies

Courses

Thermodynamics - BITS F111

Chemical Process Calculations - CHE F211

Fluid Mechanics - CHE F212

Material Science and Engineering - CHE F243

Chemical Engineering Laboratory-1 - CHE F312

Colloids and Interface Engineering - CHE F498

Chemical Process Optimization - CHE G558

Research Methodology - BITS G661

Semester-wise details:

2023-24 (1st Semester: Aug - Dec 2023)

Fluid Mechanics CHE F212 (Instructor In-charge)
Thermodynamics BITS F111 (Tutorial Instructor)

2022-23 (1st Semester: Aug - Dec 2022)

Thermodynamics BITS F111 (Instructor)
Chemical Engineering Laboratory-1 CHE F312 (Instructor In-charge)

2021-22 (2nd Semester: Jan - May 2022)

Colloids and Interface Engineering CHE F498 (Instructor In-charge)

2021-22 (1st Semester: Aug - Dec 2021)

Chemical Process Calculation CHF F211 (Instructor In-charge)
Thermodynamics BITS F111 (Instructor)

2020-21 (2nd Semester: Jan - May 2021)

Colloids and Interface Engineering CHE F498 (Instructor In-charge)
Chemical Engineering Laboratory-1 CHE F312 (Instructor)

2020-21 (1st Semester: Aug - Dec 2020)

Chemical Process Optimization CHE G558 (Instructor In-charge)
Thermodynamics BITS F111 (Instructor)

2019-20 (2nd Semester: Jan - May 2020)

Material Science and Engineering CHE F243 (Instructor In-charge)
Thermodynamics BITS F111 (Tutorial Instructor)
Colloids and Interface Engineering CHE F498 (Co-Instructor)

2019-20 (1st Semester: Aug - Dec 2019)

Fluid Mechanics CHE F212 (Instructor In-charge)
Thermodynamics BITS F111 (Tutorial Instructor)

2018-19 (2nd Semester: Jan - May 2019)

Material Science and Engineering CHE F243 (Instructor In-charge)
Research Methodology BITS G661 (Instructor In-charge)

2018-19 (1st Semester: Aug - Dec 2018)

Fluid Mechanics CHE F212 (Instructor In-charge)
Thermodynamics BITS F111 (Tutorial Instructor)

Thermodynamics BITS F111 (Instructor)
Chemical Engineering Laboratory-1 CHE F312 (Instructor In-charge)

2021-22 (2nd Semester: Jan – May 2022)

Colloids and Interface Engineering CHE F498 (Instructor In-charge)

2021-22 (1st Semester: Aug – Dec 2021)

Chemical Process Calculation CHF F211 (Instructor In-charge)
Thermodynamics BITS F111 (Instructor)

2020-21 (2nd Semester: Jan – May 2021)

Colloids and Interface Engineering CHE F498 (Instructor In-charge)
Chemical Engineering Laboratory-1 CHE F312 (Instructor)

2020-21 (1st Semester: Aug – Dec 2020)

Chemical Process Optimization CHE G558 (Instructor In-charge)
Thermodynamics BITS F111 (Instructor)

2019-20 (2nd Semester: Jan – May 2020)

Material Science and Engineering CHE F243 (Instructor In-charge)
Thermodynamics BITS F111 (Tutorial Instructor)
Colloids and Interface Engineering CHE F498 (Co-Instructor)

2019-20 (1st Semester: Aug – Dec 2019)

Fluid Mechanics CHE F212 (Instructor In-charge)
Thermodynamics BITS F111 (Tutorial Instructor)

2018-19 (2nd Semester: Jan – May 2019)

Material Science and Engineering CHE F243 (Instructor In-charge)
Research Methodology BITS G661 (Instructor In-charge)

2018-19 (1st Semester: Aug – Dec 2018)

Fluid Mechanics CHE F212 (Instructor In-charge)
Thermodynamics BITS F111 (Tutorial Instructor)

Experience

Teaching and Research Experience (28+ years)

BITS Pilani (Professor at present)

With BITS Pilani (since 2002)

Visvesvaraya National Institute of Technology, Nagpur, India (Lecturer 1995 - 2002)

On Campus courses

Thermodynamics,
Applied Thermodynamics,
Solar Thermal Process Engineering
Automotive Vehicles,
Prime Movers and Fluid machines,
Transport Phenomena II,
Renewable Energy,
Energy Management
Heat Transfer,
Engineering Graphics,
Mechanical Technology

Off campus Work Integrated learning program courses

Courses of B.S. Power Engineering, B.S. Process Engg, and BS Engineering design programs for various Industries like NTPC; Tehri Hydro; NDPL, New Delhi; Hindalco, Reanukut and Renusagar; ESSAR Power, Aditya Birla Group Cement business; Hindalco Copper, Dahej; Birla Cellulosic, Kharach; Indogulf Fetilizers, Jagdishpur; L&T IES, Vadodara

Thermodynamics,
Power Generation,
Prime Movers and Fluid machines,
Energy Management,
Fluid Mechanics and Machines,
Thermal Engineering I
Thermal Engineering II

Visvesvaraya National Institute of Technology (formerly Visvesvaraya Regional College of Engineering), Nagpur (Lecturer 1995 to 2002)

Various courses taught in the following programs

M.Tech. Heat Power Engg. (P.T.)
M.Tech. Production Engg. (P.T.)
M.Tech. Industrial Engg. (F.T)
P.G. Diploma In Industrial Management
M.E. Mechanical Engineering

As a guest faculty taught some courses in

Laximinarayan Institute of Technology, Nagpur
National Institute of Secondary Steel Technology, Nagpur
National College of Fire Engineering, Nagpur

Thesis Supervised

Higher Degree - 14

First Degree – 24

Involvement in Administrative Activities

Coordinator:

Centre for Renewable Energy and Environment Development (CREED)
B.S. Power Engineering Program,(Collaborative Program of BITS with NTPC; NDPL, New Delhi; Tehri Hydro; ESSAR Power; Hindalco, Renusagar; TATA Power, Aditya Birla Group Cement Business, JSW Energy Ltd.)
B.S. Process Engineering program (Collaborative Program of BITS with Aditya Birla Group Cement Business; Hindalco, Renukut; Hindalco Copper, Dahej; Birla Cellulosic, Kharach; Indogulf Fetilizers, Jagdishpur)
B.S. Engineering Design (L&T IES, Vadodara)
B.S. Embedded Systems (L&T IES, Vadodara)

Other

Placement Feedback Advisory Counseling (PFAC), Mechanical Engineering Department
Non Resident Warden, Gandhi Bhawan, BITS, Pilani
Professor-in-charge: Mechanical Engineer Association, Renewable Energy Club and Radio Control (RC) Club
Organizing committee member, National Conference on Energy Management in Changing Business Scenario (EMCBS-2005) B.I.T.S. Pilani, 8-9 October 2005.
Organizing Committee member, Workshop on Energy savings in Steam Systems B.I.T.S. Pilani, 26-30 April 2005.
Faculty Advisor, SAE Collegiate Club – B.I.T.S. Pilani Chapter
Nucleus member, Academic Registration and Counselling Division, B.I.T.S. Pilani.
Member, Centre for Desert Development Technologies, B.I.T.S. Pilani.
Scrutiny officer, Nagpur University Spot Valuation V.R.C.E. (V.N.I.T.) Centre Winter 2000.
Other R.E.C. Admission Committee, V.N.I.T. Nagpur, 1999 – 2000, 2002 - 2003.
G. (M. Tech. Industrial Engg.) Admission Committee, V.N.I.T. Nagpur.

Question Paper Moderation, Setting and Evaluation at Nagpur University.

Courses Taught at BITS

Mathematics Courses :

1. Advanced Calculus
2. Linear Algebra
3. Complex Analysis
4. Real Analysis
5. Measure and Integration
6. Topology
7. Functional Analysis
8. Discrete Mathematical Structures
9. Number Theory
10. Graph Theory
11. Discrete Mathematics

Computer Science courses :

1. Object Oriented Programming
2. Database Management System
3. Data Structures and Algorithms

On Campus Courses

Mathematics I (Calculus)
Mathematics II (Linear Algebra & Complex Analysis)
Mathematics III (Differential Equations)
Elementary Real Analysis
Measure & Integration
Algebra I
Probability & Statistics
Operation Research

Off-Campus Courses

Work-Integrated Learning Programs (WILP)

Teaching

MATH F353: Statistical Inference and Applications
MATH F113: Probability and Statistics
MATH F424: Applied Stochastic Process
MATH F111: Mathematics-I
MATH F432: Applied Statistical Methods

TEACHING CONTRIBUTIONS

Associate Professor, BITS Pilani Hyderabad Campus, India Mar 2023 – Till date

Assistant Professor, BITS Pilani Hyderabad Campus, India July 2015 – Feb 2023

Post Graduate (PG) Courses offered: 8

Dynamics of Structures, PG, 7 times.
Dynamics Lab, PG, 6 times
Earthquake Engineering, PG, 5 times.
Advanced Steel Structures, PG, 3 times.
Advanced Structural Analysis, PG, 1 time
Tall Structural Systems - Study in Advanced Topic, PG, 1 time
Performance Based Design - Study in Advanced Topic, PG, 1 time
Performance Based Earthquake Engineering - Study in Advanced Topic, PG, 1 time

Under Graduate (UG) Courses offered: 6

Engineering Graphics, Multi section, UG, 4 times
Engineering Graphics Lab/Tutorial, UG, 4 times
Mechanics of Solids, UG, 2 times
Analysis of Structures, UG, 2 times
Design of Concrete Structures, UG, 1 time
Design of Steel Structures, UG, 1 time

UG & PG Course Projects Guided: 70⁺

New Course Proposed: Structural Health Monitoring, PG.

Lab Developed: Structural Dynamics Lab, PG, Total ten lab sessions with simulations and experiments.

Assistant Professor, National Institute of Technology Sikkim, India Sept 2014 – April 2015

Under Graduate (UG) Courses offered: 3

Structural Analysis, UG, 1 time
Building Construction, UG, 1 time
Surveying, UG, 1 time

Lab Developed: Surveying instruments and lab setup, UG.

Institutional responsibility: In-charge of Construction and Maintenance.

Teaching Assistant, Indian Institute of Technology Kharagpur, India July 2010 – Aug 2014

Structural Laboratory, PG
Computational Mechanics, PG

Lecturer, Indian Institute of Aeronautical Engineering and Information Technology, Pune, India Aug 2009 – June 2010

Strength of Materials, UG, 1 times
Aircraft Structures, UG, 1 times
Engineering Drawing, UG, 1 times

Courses

Finite element analysis: Theory and Programming (For masters students)
Theory of plates and shells (For masters students)
Engineering Graphics (Tutorial and Practical) (For undergraduate students)
Research Practice (For masters students)
Analysis of Structures (For undergraduate students)
Mechanics of Solids (For undergraduate students)

Courses Taught

Surveying (CE F213)
Principles of Geographical Information System (CE F431)
Remote Sensing and Image Processing (BITS F442)
Engineering Graphics (BITS F110)
Operation Research for Engineers (CE F411)

Courses

Second Semester 2022-2023

MATH F 242 - Operations Research
MATH F 366 - Laboratory Projects (I.C.)
MATH F 367 - Laboratory Projects (I. C.)

First Semester 2022-2023

MATH F 111- Mathematics I
MATH ZC 222, Discrete Structure for Comp. Sc. (WILP)

Second Semester 2021-2022

MATH F 112 - Mathematics II
MATH F 213 - Discrete Mathematics

First Semester 2021-2022

MATH F 111 - Mathematics I
MATH F213 - Discrete Mathematics
MATH F 366 - Laboratory Projects (I.C.)
MATH F 367 - Laboratory Projects (I. C.)

2nd Semester 2020-2021

MATH F111 - Mathematics I,
MATH F243 - Graphs and Network , 2nd Semester 2020- 2021

TEACHING

ALL COURSES TAUGHT/BEING TAUGHT

PHY F110 Physics Laboratory
PHY F112 Mechanics, Oscillations and Waves
PHY F211 Classical Mechanics
PHY F212 Electromagnetic Theory I
PHY F213 Optics
PHY F214 Electricity, Magnetism & Optics Laboratory
PHY F215 Introduction to Astronomy and Astrophysics (current semester)
PHY F242 Quantum Mechanics I
PHY F243 Mathematical Methods of Physics
PHY F244 Modern Physics Laboratory
PHY F311 Quantum Mechanics II
PHY F312 Statistical Mechanics
PHY F313 Computational Physics
Atomic & Molecular Spectroscopy (old curriculum course)
Particle Physics (old curriculum course)
Instrumental Methods of Analysis Laboratory (old curriculum course)
PHY F315 Theory of Relativity
PHY F415 General theory of Relativity and Cosmology
PHY F420 Quantum Optics
PHY G517 Topics in Mathematical Physics
BITS F311 Image Processing

TEACHING

Courses Handled

Network Theory
Electrical technology
Applied Electronics and Instrumentation
Linear Control Systems
Machines Lab
Electrical Technology Lab
Operation Research (M. Tech)
Electromechanical Energy Conversion (BITS)
Power Systems (BITS)
Electrical Sciences (BITS)
Electrical Machines Lab
Transducers and Measurement Systems (BITS)
Power System Operation and Control (BITS, WILP)
Control Systems (BITS)
Power Electronics (BITS)
Network Lab
Microprocessors Lab
Power System lab-I
Power System lab-II
Electromagnetic Theory tutorial
Matlab Lab
Power System Analysis
Electrical Machines-II
Power Systems Engineering I (BITS, WILP) (Online Course)
Control System Simulation Lab
Control Systems Lab (BITS)
MT-II Lab (BITS)
Mech. Electrical Machines Lab. (BITS)
Electronic Instrumentation Lab (BITS)
Electrical Machines (BITS)
Modern Control Systems (BITS)

Instrumental in establishing the Labs for FD students in the EEE department

Electrical Machines Lab
Control Systems Lab
Power systems Lab
Instrumentation Lab

Teaching

At BITS PIlani, Hyderabad Campus

Engineering Optimization (ME F320 / ME F344)
Mechanics of Solids (ME F211)
Vibrtation and COntrol
Advanced Engineering Mathematics

Past Mentorship and Teaching Experiences

Guest lectured a class on Contact Mechanics in a senior level UG course (BME31400 – Experimental Methods in Biomechanics) in Weldon School of Biomedical Engineering at Purdue University, during spring semester, 2023.
Teaching assistant for Graduate level “Biomechanics Course” (Subject Code- ME 251) taught by Prof. Namrata Gundiah, Department of Mechanical Engineering. (Jan-May Semester 2019).
Mentored one masters, two undergraduate and summer research students at Chan (MRI) lab at Purdue University. Also mentored one summer intern and project assistant in Biomechanics Laboratory at IISc.

Courses Taught

Courses taught after joining BITS:

Control System ECE/EEE/INSTR F242 (Theory, Tutorial)
Control System Lab EEE F245
Power Electronics EEE/INSTR F342 (Theory, Tutorial, Lab)
Electrical Machines EEE/ECE/INSTR F211 (Theory, Tutorial, Lab)
Smart Grid for Sustainable Energy EEE/ECE/INSTR F424
Digital Design CS/ECE/EEE/INSTR F215 (Theory, Tutorial, Lab)
Energy Storage Systems EEE/ECE/INSTR F428

Teaching

Courses Taught

UG Courses

Electronic Devices

Modelling of Field Effect Nano Devices

Electronic Device Simulation Laboratory

Electrical Science

FPGA-based System Design

Microelectronic Circuit

Digital Design

PG Courses

Physics and Modelling of Semiconductor Devices

New Course Development

Electronic Material Design and Simulation Laboratory

Electronic Device Simulation Laboratory

FD Courses

First Degree Courses

Srimad Bhagavad Gita
Science of Sustainable Happiness
Technical Report Writing
Effective Public Speaking
Advanced Communicative English
Phonetics and Spoken English
Business Communication

Higher Degree Courses

Technical Communication
Research Methodology

Courses

First Degree Courses

1. Engineering Graphics (BITS F110) ( Tutorials and Lab Sessions)
2. Advanced Mechanics of Solids (ME F218) (Tutorials)
3. Mechanical Vibrations (ME F343) (Tutorials)

Higher Degree Courses

1. Theory of Elasticity and Plasticity Lab (ME G641)
2. Fracture Mechanics (DE G514) (Both Lectures and Lab)
3. Advanced Composites (MST G522) (Both Lectures and Labs)
4. Finite Element Methods (ME G512) (Both Lectures and Labs)
5. Study of Advanced Topics

WILP (Online Courses)

Fracture Mechanics (DE ZG514)

Courses

On Campus

Engineering Graphics BITS F110
Workshop Practice ME F112
Additive Manufacturing ME F425
Industry 4.0 in Manufacturing ME F426
Machine Tool Engineering ME G532
World Class Manufacturing MSE G521
Production Techniques l ME F243
Production Techniques II ME F313
Advanced Manufacturing Process ME F315
Sustainable Manufacturing MF F485
Design of Machine Tools MF F341

WILP Courses

Manufacturing Processes ETZC235/ PEZC236
Design of Experiments QMZG536
Production Planning and Control ETZC416/PEZC413

Teaching

First Semester

Machine Tool Engineering ( ME G532, HD Course)-2020, 2021
Industry 4.0 in Manufacturing (ME F426, FD course)-2020, 2021
Workshop (ME F112, FD Course)-2020
Design of Experiments (WILP)-2020

Second Semester

Sustainable Manufacturing (MF F485, FD Course)- 2020, 2021, 2022
Mechatronics & Automation (MF F311, FD Course)-2020, 2021, 2022
Workshop (ME F112, FD Course)-2022

Courses Taught

Under Graduate (UG) Courses:

1. Fluid Mechanics (ME F212/MF F212)
2. Heat Transfer (ME F311)
3. Prime Movers and Fluid Machines (ME F341)
4. Thermodynamics (BITS F111)
5. Workshop Practice (ME F110)
6. Engineering Graphics (BITS 110)

Post Graduate (PG) Courses:

1. Computational Fluid Dynamics (ME G515)
2. Fluid Dynamics (ME G621)
3. Convective Heat and Mass Transfer (ME G534)
4. Conduction and Radiation Heat Transfer (ME G533)
5. Turbomachinery (ME G514)
6. Thermal Equipment Design (ME G536)
7. Computational Heat Transfer (ME G541)
8. Microfluidics and Its Applications (ME F423)

Work Integrated Learning Program (WILP) Courses:

1. Prime Movers and Fluid Machines (POWTP ZC314)
2. Advanced Manufacturing Processes (AETT ZG622)
3. Production Planning and Control (PERL ZC411)
4. Computational Fluid Dynamics (DE ZG515)

Courses Taught

On Campus Courses

ECONF315/FINF315 : FINANCIAL MANAGEMENT
ECONF355: BUSINESS ANALYSIS AND VALUATION
FINF414: SECURITY ANALYSIS AND PORTFOLIO MANAGEMENT
MGTSF314: ESSENTIALS OF FINANCIAL MANAGEMENT
ECONG543: ADVANCED CORPORATE FINANCE

Off-campus Courses

BAZG521 : FINANCIAL MANAGEMENT

Teaching

Courses Offered

CE F313 Foundation Engineering
BITS F110 Engineering Graphics
CE F243 Soil Mechanics
CE F419 Geotechnical Earthquake Engineering and Machine Foundation
CE F426 Geosynthetics and Reinforced Soil Structures
CE G620 Advanced Foundation Engineering
MATH F113 Probability and Statistics
TEPWG ZG623 Ground Improvement Techniques (WILP)
TEPWG ZG513 Reinforced Soil Structures for Transportation Engineering (WILP)
SSTM ZG524/EE ZG523 Environmental Statistics (WILP)

Courses Taught

Computational Fluid Dynamics
Numerical Techniques for Fluid Flow and Heat Transfer
Computational Heat Transfer
Thermodynamics
Fluid Mechanics
Fluid Dynamics
Prime Movers and Fluid Machines
Convective Heat and Mass Transfer
Advanced Engineering Mathematics
Mechanical Technology
Quantitative methods
Workshop practice

Courses Taught

Polymer Chemistry (CHEM F325)

Instrumental Methods of Analysis (CHEM F391)

Physical Methods in Chemistry (CHEM G554)

Chemical Experimentation Laboratory (CHEM F341)

General Chemistry (CHEM F111)

Chemistry Laboratory (CHEM F110)

Courses

ME F452 Composite Materials and Design 2017
BITS F110 Engineering Graphics 2016, 2017, 2020
ME/MF F215 Mechanical Engineering Lab 2016, 2020
ME/MF 366 Laboratory Oriented Project 2021
ME F213 Materials Science and Engineering 2017
ME F312 Advanced Mechanics of Solids 2018, 2019, 2020
ME/MF 376 Design Oriented Project 2017, 2018
ME F211 Mechanics of Solids 2021
ME F425 Additive Manufacturing 2021, 2022, 2023
ME F219 Manufacturing Processes Tutorial 2023
ME F314 Design of Machine Elements

ME G512 Finite Element Method 2018, 2019, 2020
MST G522 Advanced Composites 2018, 2019, 2021

WILP

EDLT ZC452 Composite Materials 2016
AE ZG612 Advances in metals, composites and plastics 2018, 2019
DE ZG526 Advanced Composites 2021, 2022
DE ZG641 Theory of Elasticity and Plasticity 2024

Industry certification courses

4-day certification course on Damage Tolerant Design
One day course on Mechanics of Composites

Teaching

Applied Macroeconometrics
Principles of Economics
Financial Economics
Security Analysis and Portfolio Management
Derivatives and Risk Management
Fundamentals of Finance and Accounts (Finance module)

Logic in Computer Science

Courses Taught

Courses at BITS - Pilani Hyderabad Campus

Mathematics II: Linear algebra and Complex analysis
Probability and Statistics
Mathematics I: Calculus
Mathematics III: Differential Equations
Numerical Solutions to Ordinary Differential Equations (Semester 1, 2015-2016).
Real analysis
Functional Analysis
Applied Functional Analysis
Numerical Analysis

Courses taught earlier

Basic Mathematics courses for B. Tech. at NIT Warangal (Dec 2006-Dec 2007), IIT Gandhinagar (from Feb 2011).
The Finite Element Methods for M. Sc. Mathematics course at NIT Warangal (Dec 2006).
Advanced Numerical Methods in Engineering for M. Tech Students at IIT Gandhinagar (July 2011).
The Ordinary Differential Equations for M. Sc. Mathematics course at NIT Warangal (July 2007) and at IIT Gandhinagar (July 2013).
Introduction to Numerical Methods for B. Tech students at IIT Gandhinagar, (Jan 2012, 2013).
Mathematical methods for engineers for M. Tech students at IIT Gandhinagar, (August 2012).

Courses

CS F301 - Principles of Programming Languages ( I Semester 2019 - 2020 )
CS F111 - Computer Programming ( I Semester 2019 - 2020 )
CS F212 - Database Systems ( II Semester 2019 - 2020 )
CS F111 - Computer Programming ( II Semester 2019 - 2020 )
CS F342 - Computer Architecture ( I Semester 2020 - 2021 )
CS F422 - Parallel Computing ( I Semester 2020 - 2021 )
CS F212 - Database Systems ( II Semester 2020 - 2021 )
CS F422 - Parallel Computing ( II Semester 2020 - 2021 )

CS F342 - Computer Architecture ( I Semester 2021 - 2022 )
CS F111 - Computer Programming ( I Semester 2021 - 2022 )
CS F425 - Deep Learning ( I Semester 2021 - 2022 )
CS F212 - Database Systems ( II Semester 2021 - 2022 )
CS F425 - Deep Learning ( II Semester 2021 - 2022 )
CS F342 - Computer Architecture ( I Semester 2022 - 2023 )
CS F425 - Deep Learning ( I Semester 2022 - 2023 )
CS F212 - Database Systems ( II Semester 2022 - 2023 )
CS F425 - Deep Learning ( II Semester 2022 - 2023 )

CS F342 - Computer Architecture ( I Semester 2023 - 2024 )
CS F425 - Deep Learning ( I Semester 2023 - 2024 )

Courses

Blockchain Technology
Cryptography
Computer Networks
Computer Architecture
Computer Programming
Modern Communication Technologies
Digital Design
Communication Network
Modern Telecommunication Networks
Microprocessors Programming & Interfacing

Courses taught

Undergraduate

Sustainable Manufacturing
Manufacturing Management
Casting and Welding
Computer Aided Manufacturing
Flexible Manufacturing Systems
Workshop Practice
Production Techniques
Production and Processing
Design of Machine Elements
Maintenance and Safety
Transport Phenomena
Maintenance and Safety
Plant Layout and Design
Industrial Engineering Techniques

Graduate

Product Design and Development
Concurrent Engineering
Flexible Manufacturing Systems
Concurrent Engineering
Maintenance Engineering
Machine Tool Engineering

Research Area

Sustainable Manufacturing
Lean Manufacturing
Integrated and Green Sustainable Supply Chain Managemen
Cellular Manufacturing System
Resource Efficiency in Machining
Design of Manufacturing System
Cyber Physical Production System/Industry 4.0
Application of Artificial Intelligent technique in design of Manufacturing System

Teaching responsibility: Cellular and Molecular Pharmacology (Fall Sem); Screening Methods and Techniques in Pharmacology (Fall Sem); Principles of Toxicology (Spring Sem); Introduction to Cognitive Neuroscience (Spring Sem)

Previously handled courses

Previously handled courses in 2021-2022

Bioethics and Biosafety; Introduction to Cognitive Neuroscience; Natural Products (Co-IC); Process Engineering (Co-IC)

Courses Taught

Even Semester, 2023-24

MATH F421 - Combinatorial Math
MATH F112: Mathematics II

Odd Semester, 2023-24

MATH F231 - Number Theory

Even Semester, 2022-23

MATH F231 - Number Theory
MATH F113 - Probability and Statistics

Odd Semester, 2022-23

MATH F215 - Algebra I

Even Semester, 2021-22

MATH F421 - Combinatorial Math
MATH F113: Probability and Statistics

Odd Semester, 2021-22

MATH F231 - Number theory
MATH F111 - Mathematics I

Even Semester, 2020-21

MATH F421 - Combinatorial Mathematics
MATH F113: Probability and Statistics

Odd Semester, 2020-21

MATH F231 - Number Theory
MATH F111 - Mathematics I

Even Semester, 2019-20

MATH F341 - Introduction to Functional Analysis
MATH F113 - Probability and Statistics

Odd Semester, 2019-20

MATH F231 - Number Theory
MATH F111 - Mathematics I

Courses Taken

1. Numerical Analysis - MATH F313

2. Mathematics III - MATH F211

3. Probability and Statistics - MATH F113

4. Applied Stochastic Process - MATH F424

5. Discrete Mathematics - MATH F213

6. WILP Course - Discrete Structures for Computer Science - MATH ZC222

Courses Taught

Twenty two years of comprehensive teaching experience

Econometrics
Applied Econometrics
Advanced Econometrics
Microeconomics
Mathematical and Statistical Methods in Economics
Principles of Economics
Issues in Economic Development
Development Economics
Analysis of Indian Economy
Issues in Indian Economy
International Financial Markets & Services
Project Finance
Merchant Banking
Project Appraisal;
Advanced Financial Management
Risk Management and Insurance
Issues in Technology
Science & Technology Policy Management
R & D Management
Services Management
Health Economics & Financial Management
Business & Society
Economic Analysis of Public Policy

Current Semester Courses

Second Semester 2017-18 Course(s):

ECON F241 : Econometric Methods
ECON F342 : Applied Econometrics

Teaching

MATH F111 - Mathematics - I (Multi section)
MATH F112 - Mathematics - II (Multi section)
MATH F231 - Number Theory
BITS F113 - General Mathematics - I
BITS F114 - General Mathematics - II

Teaching

At BITS Pilani Hyderabad Campus

Mathematics I (Advanced Calculus)
Mathematics III (Differential Equations (Introductory level))
Probability and Statistics
Ordinary Differential Equations
Partial Differential Equations
Numerical Analysis

Prior to joining BITS:

An introduction to finite element methods (PG level)

Courses

PHA G535 – Biomaterials
PHA G613 – Pharmaceutical Biotechnology
PHA F315 - Pharmaceutical Formulations II
PHA F414 – Biopharmaceutics
BSPO*ZC- Pharmaceutical Formulation II (Work Integrated Learning Program)

Courses Taught

Chemical Engineering Lab-1 (CHE F312, FD Lab)
Introduction to Nanoscience & Technology (CHE G528, HD Elective)
Biochemical Engineering (CHE F421, FD Elective)
Research Methodology (BITS G661, HD course)
Thermodynamics (BITS F111, FD First Year)
Kinetics & Reactor Design (CHE F311, FD CDC)
Materials Science & Engineering (CHE F243, FD CDC)
Unit Operations II (PEZ C320, WILP CDC)
Transport Phenomena (CHE F414, FD elective)
Introduction to Biomaterials (MST F333, Minor elective)

Courses Teaching/Taught

General Mathematics I
Mathematics I (Calculus)
Mathematics II (Linear Algebra & Complex Analysis)
Complex Analysis
Elementary Real Analysis
Linear Algebra and Optimization (WILP)

Courses Taught

General Mathematics I
General Mathematics II (WILP)
Mathematics I
Mathematics II
Mathematics III
Measure Theory
Ordinary Differential Equations
Mathematical Methods

Courses Taught

Creative Thinking
Soft Skills for Professionals
Print and Audio-Visual advertising
Introduction to Mass Communication
Technical Communication
Technical Report Writing
Business Communication
Communication for Healthcare
Advertising and Sales Promotion
English Language Skills
Fiction
Linguistics
Applied Linguistics
Semantics
GRE
Spoken English
Introduction to Conflict Management

Teaching

Teaching and other duties after joining BITS-Pilani Hyderabad campus:

2024-2025-first semester

1. PHY F428 "Quantum Information Theory" as departmental elective

2. PHY F111 "MEOW" (classical mechanics core course) for UG students

2023-2024-second semester

1. PHY F110 lab for UG students

2. PHY F111 "MEOW" (classical mechanics core course) for UG students

2023-2024-first semester

1. PHY F110 lab for UG students

Voluntary In-Charge of departmental seminar

Teaching duties before joining BITS-Pilani Hyderabad campus:

Course tutor in TPIII Quantum Mechanics course (summer semester’21) and Quantum Theory of Condensed Matter Physics I (winter semester’21-22) at RWTH Aachen University, Germany
Teaching assistant (theoretical courses such as, PHY 102-classical mechanics, PHY 103-electrodynamics) and laboratory assistant (experimental courses such as, PHY 461-M.Sc. lab) during Ph.D from Indian Institute of Technology Kanpur, India

Teaching assistant (theoretical courses such as, PHY 102-classical mechanics, PHY 103-electrodynamics) and laboratory assistant (experimental courses such as, PHY 461-M.Sc. lab) during Ph.D from Indian Institute of Technology Kanpur, India

Courses Taught/Teaching

Control Systems
Modern Control System
Electrical Machines/Electro-Mechanical Energy Conversion
Power System Engineering
Electrical Sciences
Digital Electronics
Circuit Analysis/Network Theory
Circuit and Signals
Power Systems Analysis
Power Transmission and Distribution
Measurement Techniques
Electrical and Electronics Engineering Practice
Distribution Apparatus and Configuration

Courses Taught

First and Higher degree

Inorganic Chemistry
Structure and properties of materials
Measurement Techniques ( I)
Measurement Techniques (II)
Chemical Process Calculations
Selected Chemical Engineering Operations
Chemical Process Technology
Corrosion Engineering
Polymer Technology
Engineering Chemistry
Separation Processes II
Engineering Measurements

Electives:

Polymer Technology
Study Oriented Project
Lab Oriented Project
Design Project
Special Project

Courses

Courses in First Semester 2020-21

Mathematics-I (MATH F111) [Text Book: Maurice D. Weir, Joel Hass & Frank R. Giordano, Thomas's Calculus (14th Edition), Pearson Education, 2018]
Mathematics-III (MATH F211) [Text Book: G.F. Simmons, Differential Equations with Applications and Historical Notes (2nd edition), TMH, 1991] (Instructor-Incharge of this course)

On Campus Courses

Mathematics-I (MATH F111)
Mathematics-II (MATH F112) (Took lecture class in 2013-14)
Mathematics-III (MATH F211)
Probability and Statistics (MATH F113)
Number Theory (MATH F231)
Mathematical Fluid Dynamics (MATH F445)
Introduction to Functional Analysis (MATH F341)

Off Campus Courses

Engineering Mathematics-II (MATH ZC233)
Engineering Mathematics-II (POWJS ZC212)
Calculus (PEVA ZC233)

Courses

Supply Chain Management
Supply Chain Analytics (Offered New Course)
Project Management
Project Appraisal
Industrial Marketing
Marketing Research
Six Sigma (Offered New Course)

Courses

Advanced Structural Mechanics and Stability
Advanced Concrete Structures
Introduction to FEM
Engineering Graphics with AutoCAD
Dynamics of Structures
Computer Application in Civil Engineering
Fundamentals of System Engineering

Teaching Experience

I enjoy teaching and endeavor to make my classes interesting/interactive for students. The courses I have taught till now include:

General Biology
Biology Laboratory
Biological Chemistry
Ecology & Environmental Sciences
Conservation Biology
Integrated Biology
Immunology
Cell Biology
Instrumental Methods of Analysis
Environmental Biotechnology and Waste Management
Experimental Techniques
Enzymology
Food Biotechnology
Applied Nutrition and Nutraceuticals

Teaching Experience

Courses Developed

Molecular Parasitology & Vector Biology (BIO G545)

The course is designed for the students of M.E. Biotechnology and M. Sc. Biological Sciences Final Year. It focuses on the molecular aspects of parasitic infections, on vector biology and their control. It will appeal to students who wish to strengthen their training before embarking upon a research career in Entomology, Parasitology, Molecular Biology or Immunology. The course covers aspects for various diseases like malaria, Kala-Azar, filaria, Dengue, etc. , that are caused by protozoan parasites, bacteria or viruses. The course will focus on the modes of infection, life cycle of organism, infectivity pattern, and methods of diagnosis, prophylaxis and treatments to these diseases. The course will also detail about the life cycle of vectors responsible in transmitting the causative organisms of these diseases and their role in the life cycle of the causative organisms.

Courses Taught at BITS, Pilani

Total teaching experience - (at Department of Biological Sciences, BITS, Pilani)

General Biology (BIO F111/ BIO C111)
Experimental Techniques (BIO G642)
Advanced Cell Molecular Biology (BIO G542)
Molecular Parasitology & Vector Biology (BIO G545)
Microbial Fermentation Technology (BIO G513)
Recombinant DNA Technology (BIO C461)
Cell Biology (BIO C321)
Advanced & Applied Microbiology (BIO G523)
Instrumentation Methods of Analysis (BIO C391)
Laboratory Techniques (BIO C411/ F411)
Genetic Engineering (BIO C414)
Genetic Engineering Techniques (BIO C418)
Biochemical Engineering (BIO C441)
Measurement Techniques I (BIO C110)
Research Practice
Professional Practice I
Professional Practice II
Lab Oriented Projects
Study Oriented Projects
Dissertations

Courses

Current Semester:

Mechanisms and Machines
Vibration and Control

Previous Semesters:

Mechanisms and Machines
Mechanics of Solids
Transport Phenomena-I
Kinematics and Dynamics of Machines
Theory of Elasticity and Plasticity
Design of Machine Elements
Advance Mechanics of Solids
Dynamics of Machines and Vibrations
Thermodynamics
Prime Movers and Fluid Machines
Fluid Mechanics
Mechanical Engg Lab
Engineering Graphics

Teaching Experience

Assistant Professor in Department of Mechanical Engineering, Birla Institute of Technology and Science Pilani, Dubai Campus (April 2022 to Ongoing)

Teaching Assistant in Department of Mechanical Engineering, University of California, Riverside (September 2017 to June 2020)

First Semester 2023-2024

Bachelor of Engineering (B.E)

1) Workshop Practice (ME F112/F110): Enrolled Students = 193

2) Design of Machine Elements (ME F314): Enrolled Students = 16

Second Semester 2022-2023

Bachelor of Engineering (B.E)

1) Workshop Practice (ME F112/F110): Enrolled Students = 160

2) Computer-Aided Design (ME F318): Enrolled Students = 22

Master of Engineering (M.E)

1) Research Practice (BITS G540): Enrolled Student = 1

First Semester 2022-2023

Bachelor of Engineering (B.E)

1) Workshop Practice (ME F112/F110): Enrolled Students = 171

Master of Engineering (M.E)

1) Material Technology and Testing (DE G631): Enrolled Students = 11

2) Research Practice (BITS G540): Enrolled Students = 6

Courses

On campus Courses

PHAC342 Medicinal Chemistry [B.Pharm.]
PHAC211 Biological Chemistry [B.Pharm.]
PHAF344 Natural Drugs [B.Pharm.]
PHAF211 Pharmaceutical Analysis [B.Pharm.]
PHAF313 Instrumental Methods of Analysis [B.Pharm.]
PHA G512 Chemistry of Natural Drugs [M.Pharm.]
PHA G552/G522 Chemistry of Macromolecules [M.Pharm.]
PHA G534 Separation and Structure Elucidation Technique [M.Pharm.]

Work Intergrated Learning programme [WILP] for Industry Professionals

POMLMZG525 Pharmaceutical Process Development & Scale up [ M.Tech. Lupin]
PS ZC 342 - Medicinal Chemistry [B.Sc. Pharmaceutical Sciences, Dr. Reddy's Lab, Hyderabad]
PS ZC 234 -Techniques in Pharm Analysis [B.Sc. Pharmaceutical Sciences, Dr. Reddy's Lab, Hyderabad]
PS ZC 344- Natural Drugs [WILP, B.Sc. Pharmaceutical Sciences, Dr. Reddy's Lab, Hyderabad]

Project Courses

Work areas for Project Type Courses (SOPs, COPs, Special Projects, Organizational Projects)

Informatics - Applied and Theoretical
Media Studies
Computer- Mediated Communication (CMC)
Linguistic Analysis of CMC Media
Technology Interventions in Education and Governance
Soft Skills
Cross-Cultural Communication in Modern Organization (SOP)

Current Semester Courses (I Sem 2022-23)

BITS F112 Technical Report Writing
GSF 321 Mass Media Content and Design
SOP/DOP Project Courses
PhD Courses

Courses Taught in Last 5 Years

HSS F247	Social Informatics(IC)
GS F342	Computer-Mediated Communication (IC)
BITS C394	Mass Media Content and Design / GS F321 Mass Media Content and Design (IC)
BITS F112	Technical Report Writing / TA C312 Technical Report Writing (IC)
BITS F437	Technical Communication (IC)
MBA C417	Managerial Communication (IC)
ENGL C442	Effective public Speaking
TA C231	Business Communication (IC)
	Communicative English (Audit Course)
	Research Project I and II Course (for PhD Students)
	Study in Advanced Topic (for PhD Students)
	Reading Course (for PhD students)
	First Degree Thesis
	Study Oriented Projects / Computer Oriented Projects
	Summer Term Courses (Introduction to Mass Communication, Computer-Mediated Communication, SOP)
	GRE Preparation Course
TA ZC312	Technical Report Writing (Off-Campus)
QMJZG 536	Technical Communication (Off-Campus)
POWAB ZC	Technical Report Writing (Off-Campus)
PAEN ZC101	English Language Skills (Off-Campus)
	Instructor for Diploma Course(English Language Skills) for PAN-African eNetwork Project (Govt. of India Initiative)

Teaching

Courses (odd 2024-25)

CS F429 - Natural Language Processing
CS F351 - Theory of Computation

Courses (even 2023-24)

CS F429 - Natural Language Processing
CS F363 - Compiler Construction
MPBA G519 - NLP for Business

Courses (odd 2023-24)

CS F429 - Natural Language Processing
CS F351 - Theory of Computation

Courses (Even 2022-23)

CS F211 - Data Structures & Algorithm
CS F363 - Compiler Construction

Subject Expertise

Cognitive Analytics
Data Warehousing & Data Mining
Deep Learning
Information Storage & Retrieval Techniques
Machine Learning
Natural Language Processing
Software Engineering

Courses Handled

First Degree Courses

Engineering Graphics (First Year Course)
Computer Programming – I (First Year Course)
Civil Engineering Practice (Second Year Course)
Measurement Techniques - II (Second Year Course)
Environmental Studies (Second Year Course)
Construction Planning and Technology (Core Course)
Design of Concrete Structures (Core Course)
Design of Steel Structures (Core Course)
Geodesy (Core Course)
Mechanics of Solids (Core Course)
Soil Mechanics and Foundation Engineering (Core Course)
Operating Systems (Core Course)
Numerical Analysis (Elective)
Operations Research for Engineers (Elective)

Higher Degree Courses

Structural Optimization (Elective)
Advanced Computational Techniques (Elective)
CAAD in Civil Engineering (Elective)
Environmental Statistics (Elective)

Courses

Courses Taught

Computer Networks
Computer Programming-I
Computer Programming-II
Data Processing
Data Structures and Algorithms
Database Systems
Network Programming
Network Security
Object Oriented Programming
Software Engineering
Software Engineering & Management

Courses Teaching (Aug- Dec 2016)

Cloud Computing - Lab1
Cloud Computing - Lab2

Cloud Computing (2017-18)

Lab	Topic	Lab Sheet
Lab1	SOA & Web Services	Lab Sheet Source files
Lab2	MPI	Lab Sheet	17-Aug-2017
Lab3	MapReduce and Hadoop	Lab Sheet	24-Aug-2017
Lab4	Apache Spark introduction	Lab Sheet	31-Aug-2017
Lab5	Microsoft Azure: Virtual Machine creation, and configuration. Storage services. Load balancing services. Demonstration of IaaS.	Lab sheet	14-Sep-2017
Lab6	Implementing Consensus protocols using MPI	Lab sheet	19-Sep-2017
Lab7	Libvirt using KVM	Lab Sheet	31-Oct-2017
Lab8	Azure Storage, Azure App Services		14-Nov-2017
Lab9	Azure Databases, Azure Machine Learning Studio		16-Nov-2017

Courses (2018-19)

IS F462 Network Programming
IOTOC6 Data Management in IoT

Teaching Courses

UG Courses

Transport Phenomena/ Fluid Mechanics (CE F212/CE F231)
Numerical Analysis (CE F324)
Hydraulic Engineering (CE F312)
Computer Application in Civil Engineering (CE F416)
Hydrology and Water Resource Engineering (CE F341)
Soil Mechanics (CE F234)
Engineering Graphics (BITS F111)
Study Projects (CE F266)
Laboratory Projects (CE F367)
Special Study Projects (CE F491)
Special Design Project

PG Courses

Fluid Dynamics (CE G621)
Environmental System Modelling
Environmental Impact Assessment
Study of Advance Topic – PG

Present Teaching Engagements

Since last few years I am enjoying teaching these courses using various teaching pedagogy at undergraduate/postgraduate level.

Data Structures and Algorithms
Theory of Computation
Computer Networks
Foundations of Data Science
Computer Programming
Internetworking Techonologies

Unlike traditional classroom teaching pedagogy, recently this subject was offered using MOOC, which involves flipped classroom teaching pedagogy. It is a form of blended learning in which students learn new content, online, by watching video lectures. And what used to be homework (assigned problems) is now done in class with instructor offering more personalized guidance and interaction with students, instead of lecturing.

The subject was offered using COURSERA platform and then Edx platform. We used the tools and technology of coursera (later EdX) for offering Computer Programming course via flipped classroom teaching pedagogy.

Click here for the handout of Computer Programming course.

Past Teaching Engagements

Other than the above courses, in past I had also enjoyed teaching these courses.

DESIGN AND ANALYSIS OF ALGORITHMS
OBJECT ORIENTED PROGRAMMING (using JAVA)

Courses

Courses taught /teaching at BITS Pilani

Experimental Techniques (BIO G642)
Recombinant DNA Technology (BIO C461/ BIOF311)
Laboratory Techniques (BIO C411)
Genetic Engineering (BIO C418)
Measurement Techniques I
General Biology (BIO F111)
Biology Laboratory (BIO F110)
Integrated Biology
General Physiology
Animal Physiology
Biology Project Lab (BIO F231)
Food Biotechnology
Applications of Statistics and Computers in Biology
Application of Statistics and Computers in Pharmacy
Genetics
Cell Biology (BIO F213)
Advanced Recombinant DNA Technology (BIO G561)
Biostatistics and Biomodelling (BIO G532)

Courses

Apart from GRE and Communicative English classes, I am also associated with Work Integrated Learning Programmes of BITS and deliver online classes for Technical Report Writing. I do supervision for PhD projects, First Degree theses and several Study Oriented Projects.

And the following courses I like to teach as and when they are offered:

Reporting and Writing for Media
Copywriting
Print & Audio Visual Advertising
Strategic Sports Communication
Managerial Communication
Technical Report Writing
Technical Communication
English Language Skills
English for Academic Purpose
Applied Linguistics
Basic Language Skills & Remedial Grammar
A Course in Short Story & One Act Plays
A History of English Literature
A Background to English Literature

Courses

At Undergraduate Level:

CS/EEE/INSTR F215 Digital Design (Compulsory Discipline Course)
EEE/INSTR F243 Signals and Systems (Compulsory Discipline Course)
EEE F111 Electrical Sciences (Compulsory Discipline Course)

At Postgraduate Level:

EEE G582 Telcom Network Management
Elective Courses at Postgraduate and Undergraduate level:
EEE F434 Digital Signal Processing
EEE F432 Medical Instrumentation

Courses

Animal Physiology, BIO F313
General Biology, BIO F111
Developmental Biology BIO F341
Biology Laboratory BIO F110
Genetic Engineering Technology BIO F418
Molecular Mechanism Of Gene Expression BIO G512
Environmental Studies BITS F225
Molecular Biology of the Cell BIO F413
Genomics BIOT F346
Cancer Biology BIO G526
Stem Cell and Regenerative Biology BIO G515

Courses

I teach the following courses:

1. General Chemistry : A theory course for the undergraduate students which includes quantum theory, atomic structure and spectra, VB- and MO-theory, thermodynamics, chemical kinetics, UV-, IR-, and NMR-spectroscopy, conformational analysis of organic molecules (cyclic and acyclic), stereochemistry, substitution and elimination reactions, nucleophilic addition to C-C multiple bonds, aromaticity, coordination chemistry

2. Chemistry Laboratory : A practical course for the undergraduate (1st year) students which includes several laboratory experiments of physical, organic and inorganic chemistry.

3. Environmental Studies: A theory course for the undergraduate (1st year) students which includes the concepts of ecosystems, biodiversity, natural resources, environmental pollution etc.

4. Organic Chemistry II : A theory course for M.Sc. chemistry (Hons.) students which includes stereochemistry, reaction mechanism (substitution and elimination), pericyclic reactions and asymmetric synthesis.

5. Organic Chemistry III : A theory course for M.Sc. chemistry (Hons.) students which includes important reagents and reactions in organic synthesis, disconnection approach (one group C-X and C-C disconnections, two group C-X and C-C disconnections) in organic synthesis (retrosynthetic analysis), synthetic strategies for important heterocyclic and heteroaromatic compounds, transition-metal catalyzed C-C bond forming reactions (Suzuki, Heck, Hiyama, Negishi, Sonogashira, Stille cross-coupling reaction), C-N bond forming reactions (Buchwald-Hartwig reaction)

6. Organic Chemistry IV : A theory course for M.Sc. chemistry (Hons.) students which includes synthesis, physical properties and reactions of amino acids, protein/polypeptide sequence analysis, structural features and synthesis and also heterocyclic chemistry including preparation, properties and reactions of three, four, five and six membered heterocycles and fused heteroaromatics.

7. Frontiers in Organic Chemistry : An elective course for M. Sc. Chemistry (Hons.) students which includes strategy and control to achieve chemo-, regio- and stereoselective organic synthesis, cross-coupling reactions, metal-catalyzed carbocyclization, direct functionalization of olefins, radical chemistry, metal-free catalysis, tandem reactions

8. Chemical Experimentation Laboratory-I : A practical course for the M.Sc. chemistry (Hons.) students which includes detection of special elements (nitrogen, sulfur and halogens) and functional groups in an organic sample, synthesis of various class of important organic molecules, monitoring the progress of an organic reaction by thin layer chromatography (TLC), separation of different type (acidic and basic) of organic compounds by simple basic or acidic aqueous work up with organic solvent, separation and isolation of organic compounds from a mixture by column chromatography, natural product isolation.

9. Advanced Organic Chemistry : A theory course for the Ph.D. students which includes aromatic electrophilic and nucleophilic substitution, nucleophilic addition to C-C and C-X (X = heteroatom) multiple bonds, oxidation and reduction reactions, retrosynthetic analysis and protecting groups, enolates in organic synthesis and multistep synthesis

10. Heterocyclic Chemistry : A theory course for the Ph.D. students which includes nomenclature of heterocyclic molecules, chemistry of three and four membered heterocycles, reactivity of aromatic heterocycles, synthesis and reactions of various five- and six-membered heterocyclic molecules such as furan, thiophene, pyrrole, imidazole, thiazole, oxazole, indole, benzofuran, pyridine, quinolone, and isoquinoline, and synthesis of selected heterocyclic natural products and drug molecules

11. Physical Methods in Chemistry : A theory course for the Ph.D. students which describes the principles and practice of modern instrumental methods for chemical analysis. This course includes various spectroscopic techniques such as UV-Visible, Infrared, XPS, XRF, NMR (¹H, ¹³C and other elements, NOE, correlation spectroscopies), ESR, CD, Mass spectroscopy, atomic absorption and emission spectroscopies, fluorescence spectroscopy and microscopy and chromatographic techniques such as GC/HPLC. Other topics include electroanalytical methods, thermal analysis, Mossbauer spectroscopy and diffraction methods like SCXRD and PXRD

Courses Taught

Fuzzy Logic and Applications
Neural Networks and Fuzzy Logic
Probability and Statistics
Multicriterion Analysis in Engineering
Multicriterion Decision-making in Engineering and Management
Operations Research
Optimization
Computer Applications in Civil Engineering
Application of Artificial Intelligence in Civil Engineering
Impact of Climate Change on Water
Fluid Mechanics
Hydraulics and Fluid Mechanics
Introduction to Water Resources Engineering
Hydrology and Water Resources Engineering
Engineering Hydrology
Water Resources Planning and Management
Water and Wastewater Treatment
Fluid and Solid Mechanics
Mechanics of Solids
Research Methodology

Course Taught

Engineering Graphics (BITS F110)
Soil Mechanics (CE F243)
Engineering Hydrology (CE F321)
Fluid Mechanics (CE F231)
Mechanics of Solids (CE F211)
Analysis of Structures (CE F241)
Water and Wastewater Treatment (CE F342)
Principle of GIS ( CE F431)

COURSES

Mechanics of Solids

Mechanics of Solids course imparts a deep understanding of principles governing structural and mechanical component strength, deformation, and stability. Applying Newtonian mechanics to static bodies, students analyze elements, emphasizing engineering judgment and STAAD Pro for stress, strain, and deformation calculations. This course equips students for structural and mechanical system design and evaluation.

Analysis of Structures

Analysis of Structures course focuses on fundamental principles and techniques in structural engineering. Students will learn to analyze both statically determinate and indeterminate structures, calculate internal forces and displacements, and explore matrix methods for complex systems. This course equips students with essential skills for ensuring the safety and efficiency of various civil engineering projects.

Design of Reinforced Concrete Structures

Design of Reinforced Concrete Structures course imparts essential skills for analyzing and designing Civil Engineering Reinforced Concrete (RC) Structures, following the Limit State design method (IS-456:2000). It covers the analysis and design of beams, slabs, columns, staircases, and foundations. The course introduces concrete materials and incorporates modeling, analysis, and design using Bentley STAAD Pro software.

Design of Steel Structures

Design of Steel Structures course introduces students to limit state design principles for structural steel members under various loads, including compression, tension, and bending, as well as connections. It covers the design of systems like roof trusses and gantry girders according to IS 800 - 2007. Students will grasp design philosophies, bolted and welded connections, tension members, shear lag effects, axially loaded columns, and column base connections. The course also addresses issues related to laterally restrained and unrestrained steel beams.

Hydrology and Water Resources Engineering

Hydrology and Water Resources Engineering introduces students to the essential principles of water resources engineering, covering topics like the hydrologic cycle, rainfall, runoff, reservoir planning, dam fundamentals, flood routing, and river basin management. The course also explores systems analysis techniques for planning, groundwater hydrology, water withdrawals, and river basin management. This unified approach equips students to address real-world challenges comprehensively and gain a holistic perspective on the subject.

Soil Mechanics

Soil Mechanics provides a comprehensive understanding of saturated soil behavior and performance. By the course's end, students will possess the skills to assess both physical and engineering aspects of soils, including stress transfer in two-phase systems. They will be proficient in determining index properties, soil classification, and engineering property assessment through standard tests and empirical corrections using index properties. The course emphasizes the application of relevant Indian and ASTM Standard codes of practice.

Foundation Engineering

Foundation Engineering focuses on imparting knowledge about geotechnical design parameters and the foundation design process. By the course's completion, students will have the ability to assess soil conditions, select appropriate foundation types (shallow, pile, retaining walls), and design them effectively. The course also covers slope stability analysis and introduces students to ground improvement techniques.

Geotechnical Earthquake Engineering and Machine Foundation

Geotechnical Earthquake Engineering and Machine Foundation course aims to provide in-depth knowledge and skills in various aspects related to seismic hazards and machine foundation design. The course covers seismic hazard assessment, engineering seismology, wave propagation, dynamic soil properties, dynamic bearing capacity, seismic foundation design, seismic slope stability, dynamic earth pressure, seismic design of retaining structures, liquefaction, machine foundation design, and soil improvement techniques. Students will gain expertise in addressing the seismic challenges associated with geotechnical engineering and machine foundations.

Environmental Impact Assessment

Environmental Impact Assessment provides an introductory overview of the field. The course delves into fundamental environmental concepts, global issues, and the impact of infrastructure development. Topics include prediction and assessment of environmental impacts, technical and procedural aspects, legal regulations, effects on air, water, soil, and noise environments, valuation, strategic assessment, social impact assessment (SIA), Life Cycle Assessments (LCA), risk analysis methods, mitigation strategies, case studies, and environmental management plans (EMP). The emphasis is on understanding governing laws and practical applications, offering students a unified approach to address real-life environmental challenges comprehensively.

Courses taught

UG Courses

CHEM C311 - Chemical Kinetics
CHEM F313 - Instrumental Methods of Analysis
CHEM F111 - General Chemistry (Lecture & Tutorial)
CHEM F110 - Chemistry Laboratory
CHEM C411 - Chemical Experimentation Laboratory
CHEM F312 - Physical Chemistry IV
CHEM F334 - Magnetic Resonances (Designed the handout and offered first time at BITS Pilani)
CHEM F211 - Physical Chemistry I
CHEM F223 - Colloid and Surface Chemistry
CHEM F412 - Photochemistry and Laser Spectroscopy
Project type courses- SP, DP, LP
UG Thesis

PhD Courses

CHEM G553 - Advanced Physical Chemistry
CHEM G531 - Recent Advances in Chemistry
CHEM G554 - Physical Methods in Chemistry

Courses

Odd Semester (2023-2024)

Computer Programming (CS F1111)
Logic in Computer Science (CS F214)
Object Oriented Design and Analysis (SS G514)

Teaching courses

Electronic Instruments and Instrumentation Technology (Theory)
Medical Instrumentation( Theory)
Transducers and Measurement Techniques (Tutorial)
Industrial Instrumentation and Control (Tutorial)
Engineering Measurements (WILP, Theory)
Digital Design (Tutorial)
Signals and Systems (Tutorial)
Electrical Sciences (Tutorial)
Analog Electronics (Tutorial)
Electronic Devices (Tutorial)
Electrical and Electronic circuits Laboratory

Courses

CS G566 Secure Software Engineering (Lecture, Summer Term 2016)
CS F372 Operating System (Lecture, Tutorial, Sem I 2016-2017)
CS F342 Computer Architecture (Practical, Sem I 2016-2017)
SS ZG526 Distributed Computing (WILP course, Sem I 2016-2017)
CS F213 Object Oriented Programming (Lecture, Practical, Sem II 2016-2017)
SS ZG526 Distributed Computing (WILP course, Sem II 2016-2017)
CS F111 Computer Programming (Lecture, Practical, Sem I 2017-2018)
SS ZG526 Distributed Computing (WILP course, Sem I 2017-2018)
CS F213 Object Oriented Programming (Lecture, Practical, Sem II 2017-2018)
SS ZG526 Distributed Computing (WILP course, Sem II 2017-2018)
CS F213 Object Oriented Programming (Lecture, Practical, Tutorial, Sem I 2018-2019)
SS ZG526 Distributed Computing (WILP course, Sem I 2018-2019)
CS F213 Object Oriented Programming (Lecture, Practical, Sem II 2018-2019)
CS F211 Data Structures and Algorithms (Tutorial, Practical, Sem II 2018-2019)
CS F372 Operating Systems (Lecture, Sem I 2019-2020)
CS F213 Object Oriented Programming (Practical, Tutorial, Sem I 2019-2020)
CS F211 Data Structures and Algorithms (Practical, Tutorial, Sem II 2019-2020)
SS ZG526 Distributed Computing (WILP course, Sem I 2020-2021)
CS F372 Operating Systems (Lecture, Sem II 2020-2021)
SS ZG526 Distributed Computing (WILP course, Sem II 2020-2021)
CS F372 Operating Systems (Lecture, Sem I 2021-2022)
SS ZG526 Distributed Computing (WILP course, Sem I 2021-2022)
CS F211 Data Structures and Algorithms (Practical, Sem II 2021-2022)
SS ZG526 Distributed Computing (WILP Course, Sem II 2021-2022)
CS F372 Operating Systems (Tutorial, Sem I 2022-2023)
SS ZG526 Distributed Computing (WILP Course, Sem I 2022-2023)
SS ZG526 Distributed Computing (WILP Course, Sem II 2022-2023)
CS F211 Data Structures and Algorithms (Practical, Sem II 2022-2023)
CS F372 Operating Systems (Lecture, Sem I 2023 2024)
BITS F232 Foundations of Data Structures & Algorithms (Practical, Sem I-2023 2024)
CS F372 Operating Systems (Lecture, Sem II 2023 2024)
CS F211 Data Structures and Algorithms (Tutorial, Sem II 2023-2024)
CS F321 System Security (Lecture, Sem I 2024-2025)
BITS F232 Foundations of Data Structures & Algorithms (Practical, Sem I 2024-2025)
Co-instructor for B.Sc. Computer Science Coursera Course (Sem I 2024-2025)

Knowledge Dissemination

Lecture Courses

AN F311 Principles of Aerodynamics [UG]

Number of Times: 2 (II Sem. AY 2021-22, II Sem. AY2020-21)

BITS F111 Thermodynamics [UG]

Number of Times: 10 (II Sem. AY2023-24, I Sem. AY2023-24, II Sem. AY2022-23, II Sem. AY2021-22, I Sem. AY2021-22, II Sem. AY2020-21, I Sem. AY2020-21, II Sem. AY2019-20, I Sem. AY2019-20, II Sem. AY2018-19)

ME F212 Fluid Mechanics [UG]

Number of Times: 4 (I Sem. AY2021-22, I Sem. AY2019-20, I Sem. AY2017-18, I Sem. AY2016-17)

ME F317 Engines, Motors and Mobility* [UG]

Number of Times: 7 (I Sem. AY2023-24, I Sem. AY2022-23, I Sem. AY2021-22, II Sem. AY2020-21, II Sem. AY2019-20, II Sem. AY2017-18, II Sem. AY2016-17, II Sem. AY2015-16)

ME F341 Prime Movers and Fluid Machines [UG]

Number of Times: 3 (II Sem. AY2023-24, II Sem. AY2022-23, II Sem. AY2021-22)

ME F415 Gas Dynamics [UG]

Number of Times: 3 (I Sem. AY2020-21, I Sem. AY2018-19, II Sem. AY2016-17)

ME F418 Rocket and Spacecraft Propulsion [UG]

Number of Times: 4 (I Sem. AY2022-23, II Sem. AY2019-20, II Sem. AY2018-19, I Sem. AY2017-18)

ME F420 Power Plant Engineering [UG]

Number of Times: 1 (I Sem. AY2016-17)

ME F423 Microfluidics and its Applications [G]

Number of Times: 2 (I Sem. AY2020-21, I Sem. AY2018-19)

ME G513 Heating and Cooling of Buildings [UG / G]

Number of Times: 1 (I Sem. AY2018-19)

BITS G540 Research Practice [G]

Laboratory Courses

ME F112 Workshop Practice [UG]

Number of Times: 2 (I Sem. AY2023-24, II Sem. AY2018-19)

ME F217 Applied Thermodynamics** [UG]

Number of Times: 5 (I Sem. AY2022-23, I Sem. AY2021-22, I Sem. AY2018-19, I Sem. AY2017-18, I Sem. AY2016-17)

ME F311 Heat Transfer [UG]

Number of Times: 1 (I Sem. AY2018-19)

ME F341 Prime Movers and Fluid Machinery [UG]

Number of Times: 3 (II Sem. AY2022-23, II Sem. AY2021-22, II Sem. AY2017-18)

*(Previously: ME F242 Internal Combustion Engines)

**(Previously: ME F215 Mechanical Engineering Laboratory)

[UG]: - Undergraduate-level Course, [G]: - Graduate-level Course

Courses

Social Media Analytics
Data Mining
Advanced Data Mining
Information Retrieval
NLP & Vision with Deep Learning
Machine Learning
Data Structures & Algorithms
Advanced Analysis of Algorithms
Object Oriented Analysis & Design

Courses

Process Dynamics & Control
Environmental Pollution Control
Separation Processes 2
Colloids and Interface Engineering
Engineering Chemistry
Research Methodology
Thermodynamics

—————————–

Teaching

Courses

Currently handling:

Energy Management
Applied Thermodynamics

Previously taught:

Prime Movers and Fluid Machines
Energy Systems Engineering
Engines, Motors, and Mobility
Refrigeration and Air Conditioning
Heating and Cooling of Buildings
IC Engines
Power Plant Engineering
Thermodynamics
Turbomachinery
Renewable Energy
Automotive Vehicles

Courses Taught

Technical Report Writing (B. Tech.)
Introduction to Critical Pedagogy (B. Tech.)
Effective Public Speaking (B. Tech.)
Computer-Mediated Communication (B. Tech.)
Social Informatics (B. Tech.)
Technical Communication (M. Tech.)
Research Methodology (Ph. D.)

Courses

'When one teaches, two learn' -

Heinlein

Higher Degree - Lecture Courses

Thermal Equipment Design

Sem I 2022-2023

Nondestructive Testing Techniques

Sem II 2021-2022

Research Practice

Sem II 2021-2022

First Degree - Lecture Courses

Principles of Aerodynamics

Sem II 2023-2024.

Fluid Mechanics

Sem 1 2024-2025, Sem 1 2023-2024

Thermodynamics

Sem 1 2024-2025, Sem II 2023-2024, Sem I 2023-2024, Sem II 2022-2023, Sem 1 2022-2023, Sem II 2021-2022.

Automotive Vehicles

Sem II 2022-2023

First Degree - Lab Courses

Applied Thermodynamics

Sem I 2023-2024

Workshop Practice Lab

Sem II 2023-2024, Sem II 2022-2023

Teaching Experience

I have been involved in teaching various courses at the first degree and higher degree level in capacity of Instructor-in- charge/ Instructors. I have also been involved in the course planning and development of many of these. Besides this, I have initiated new courses in Immunology and Cancer Biology. I have coordinated the course restructuring of M.Sc. and ME programs of the Biological Science Department as DCA Convenor from 2012 -2014.

Teaching courses

Pharmacoeconomics

Forensic Pharmacy (co-IC)

Pathophysiology

Cellular and Molecular Pharmacology

Pharmacovigilance

Courses

*Courses Developed:

Applied Estimation Theory [EEE G641] (Status: Approved)
Green Communications and Networks [EEE F430] (Status: Approved)
Applied Probability and Stochastic Processes (Status: Submitted to Department Committee for Academics)
Interdisciplinary course: Quantum communications and networks (Status: Submitted to Department Committee for Academics)

*Labs/Assignments/Tutorials/Projects/Seminars developed/introduced for the following courses:

Communication Systems (MATLAB based experiments, practice questions sets)
Advanced digital communication (MATLAB tutorials, SDR based experiments, assignments, projects)
Mobile telecommunications and networks (MATLAB tutorials, assignments, seminars, SDR based experiments)
Coding theory and practice (MATLAB based experiments, demos, projects, seminars)
Advanced satellite communication (MATLAB assignments, projects)
Applied estimation theory (MATLAB based assignments, projects, seminars)
Automotive communication systems (MATLAB and VANET simulator based labs)
Advanced digital signal processing (MATLAB based assignments, projects, seminars)
Signals and systems (MATLAB demos, MATLAB Tutorial)

*Courses (Teaching/Taught)

Number of distinct courses taught (on-campus): Lecture (10), Tutorial (6)
Number of courses taught (off-campus): Lecture (01)

[Aug. 2024- Dec 2024]
First degree: Communication Systems (Lecture, Lab, Tutorial)
First degree: Electromagnetic theory (Tutorial)

[Jan. 2024- May 2024]
First degree: Green Communications and Networks (Lecture)
Information Theory and Coding (Tutorial)
Electrical Sciences (Tutorial)

[Aug. 2023- Dec 2023]
First degree/Higher degree: Satellite Communications (Lecture)
Higher degree: Advanced Digital Signal Processing (Lecture & Lab)

[Jan. 2023- May 2023]
First degree: Green Communications and Networks (Lecture)
[Mar. 2023- Jul. 2023]
First degree: Electrical Sciences (Tutorial)

[Aug. 2022- Dec. 2022]
First degree/Higher degree: Satellite Communications (Lecture)
Higher degree: Advanced Digital Signal Processing (Lecture)

[Jan. 2022- May 2022]
First degree:
Signals and systems (Lecture, Tutorial)
Analog electronics(Tutorial)

[Aug. 2021- Dec. 2021]
Higher degree: Applied estimation theory (Lecture)
Coding theory and practice (Lecture)

[Mar. 2021- Jul. 2021]

Higher degree: Advanced digital communication (Lecture)
[Jan. 2021- May 2021]
Automotive communication systems [WILP course]
First degree: Signals and Systems (Tutorial)
[Nov. 2020- Mar. 2021]

Higher degree: Coding theory and practice (Lecture)
[Aug. 2020- Dec. 2020]
Higher degree: Applied estimation theory (Lecture)

[Jan. 2020- May 2020]
Higher degree: Advanced digital communication (Lecture)
First degree: Satellite communication (Lecture)

[Aug. 2019- Dec. 2019]
Higher degree: Applied estimation theory (Lecture), Coding theory and practice (Lecture)
First degree: Communication Systems (Tutorial)

[Jan. 2019- May 2019]
Higher degree: Advanced digital communication (Lecture)
First degree: Mobile Telecommunications and Networks (Lecture)

[Aug. 2018- Dec. 2018]
Higher degree: Advanced satellite communication (Lecture)
Advanced digital signal processing (Lecture)
First degree: Communication Systems (Lecture)

[Jan. 2018- May 2018]
Higher degree: Advanced digital communication (Lecture)
First degree: Signals and systems (Tutorial)
First degree: Electrical sciences (Tutorial)

[Aug. 2017- Dec. 2017]
Higher degree: Advanced satellite communication (Lecture)
First degree: Communication Systems (Lecture, Lab, Tutorial)

[Jan. 2017- May 2017]
Higher degree: Advanced digital communication (Lecture)
First degree: Mobile Telecommunications and Networks (Lecture)
First degree: Signals and Systems (Tutorial)

[Aug. 2016- Dec. 2016]
Higher degree: Advanced satellite communication (Lecture)
First degree: Communication Systems (Lecture, Lab, Tutorial)

[Jan. 2016- May 2016]
Higher degree: Advanced digital communication (Lecture)
First degree: Mobile Telecommunications and Networks (Lecture)

[Aug. 2015- Dec. 2015]
First degree: Satellite communication (Lecture)
First degree: Data communications and networking (Lecture)

[Jan. 2015- May 2015]
Higher degree: Advanced digital communication (Lecture)
First degree: Microprocessor programming and interfacing (Tutorial)

My Teachings

Theory Course 1: General Chemistry
Theory Course 2: Bonding in Inorganic Compounds
Theory Course 3: Inorganic Chemistry III - Bioinorganic Chemistry
Theory Course 4: Advanced Inorganic Chemistry
Theory Course 5: Instrumental Methods of Analysis
Theory Course 6: Green Chemistry and Catalysis
Theory Course 7: Recent Advances in Chemistry
Lab Course 1: General Chemistry Laboratory
Lab Course 2: Chemical Experimentation Laboratory
Lab Course 3: Instrumental Methods of Analysis

Courses

Engineering Graphics (BITS F110)
Introduction to Engineering Design (BITS F234)
Mechanical System Design (ME G521)

Teaching

Undergraduate level

Process Dynamics and Control
Transport Phenomena
Chemical Engineering Laboratory - I (CFD – COMSOL Lab)
Petroleum Refining Technology
Process Equipment Design
Fluid Mechanics / Fluid Flow Operations
Chemical Engineering Laboratory – II (Process Control and Reaction Engineering Lab)
Heat Transfer (Lab)
MeasurementTechniques – II (Lab)
Structureand Properties of Materials (BITS Pilani Pilani Campus, 2005)
Undergraduate project guidance (Study projects, Laboratory projects, Design projects)
Undergraduate Thesis (One semester) - Guidance

Postgraduate level

Mathematical Methods in Chemical Engineering
Graduate Thesis/Dissertation (Two Semester) - Guidance

Semester Wise Teaching

Year	Semester – I	Semester – II
2023 – 2024	Petroleum Refining Technology (IC)	Process Dynamics and Control (IC)
2023 – 2024	Chemical Engineering Lab – I (CFD - COMSOL Lab) (IC)
2022 – 2023	Petroleum Refining Technology (IC)	Process Dynamics and Control (IC)
2022 – 2023	Chemical Engineering Lab – I (CFD - COMSOL Lab) (IC)
2021 – 2022	Petroleum Refining Technology (IC)	Process Dynamics and Control (IC)
2021 – 2022	Chemical Engineering Lab – I (CFD - COMSOL Lab) (IC)	Transport Phenomena (IC)
2020 – 2021	Petroleum Refining Technology (IC)	Process Dynamics and Control (IC)
2020 – 2021	Chemical Engineering Lab – I (CFD - COMSOL Lab) (IC)	Transport Phenomena (IC)
2019 – 2020	Petroleum Refining Technology (IC)	Process Dynamics and Control (IC)
2019 – 2020	Chemical Engineering Lab – I (CFD - COMSOL Lab) (IC)	Transport Phenomena (IC)
2018 – 2019	Petroleum Refining Technology (IC)	Process Equipment Design (IC)
2018 – 2019	Chemical Engineering Lab – I (CFD - COMSOL Lab) (IC)	Process Dynamics and Control (IC)
2017 – 2018	Fluid Mechanics (IC)	Process Equipment Design (IC)
2017 – 2018	Chemical Engineering Lab – I (CFD - COMSOL Lab) (I)	Petroleum Refining Technology (IC)
2016 – 2017	Transport Phenomena (IC)	Process Equipment Design (IC)
2016 – 2017	Chemical Engineering Lab – I (CFD - COMSOL Lab) (I)	Chemical Engineering Lab – II (Process Control + Reaction Engg) (IC)
2015 – 2016	Transport Phenomena (IC)	Transport Phenomena (IC)
2015 – 2016	Chemical Engineering Lab – I (CFD - COMSOL Lab) (I)	Chemical Engineering Lab – II (Process Control + Reaction Engg) (I)
2014 – 2015	Transport Phenomena (IC)	Transport Phenomena (IC)
2014 – 2015	Chemical Engineering Lab – I (CFD - COMSOL Lab) (I)	Chemical Engineering Lab – II (Process Control + Reaction Engg) (I)
2013 – 2014	Fluid Mechanics (IC)	Transport Phenomena (IC)
2013 – 2014	Transport Phenomenon (IC)	Chemical Engineering Laboratory – II (Process control + Reaction Engg) (Instructor –In- Charge (IC))
2012 – 2013	Fluid Mechanics (IC)	Mathematical methods in Chemical Engineering (Postgraduate Level) (IC)
2012 – 2013	Transport Phenomena (IC)	Transport Phenomena (IC)
2011 – 2012	Transport Phenomenon (IC)	Fluid Flow Operations (IC)
2011 – 2012	Heat Transfer Operations (Lab) (I)	Transport Phenomenon (IC)
2010 – 2011	Heat Transfer Operations (Lab) (I)	Fluid Flow Operations (IC)
		Transport Phenomenon (IC)
		Measurement Techniques – II (Lab) (I)

*IC - Instructor-in-Charge of a course

I - Instructor in a course

Teaching/ Courses Handled

Electromagnetic Theory (ECE/EEE/INSTR F212), 2024-25, Semester-I (ODD) [373 students] [Co-Instructor with Dr. Hrishikesh Sonalikar]
Digital Image Processing (EEE F435), 2024-25, Semester-I (ODD) [Co-Instructor with Dr. Ravi K.]
Digital Image Processing (EEE F435) [139 students] 2023-24, Semester-II (EVEN)
Analog Electronics Lab, [Two sections] 2023-24, Semester-II (EVEN)
Electromagnetic Theory (ECE/EEE/INSTR F212), 2023-24, Semester-I (ODD) [386 students] [Co-Instructor with Dr. Hrishikesh Sonalikar]
Digital Image Processing (EEE F435), 2023-24, Semester-I (ODD) [Co-Instructor with Dr. Ravi K.]
Electromagnetic Theory (ECE/EEE/INSTR F212), 2022-23, Semester-I (ODD) [300 students] [Co-Instructor with Dr. Hrishikesh Sonalikar]
Electrical Sciences (EEE F111), 2021-22, Semester-II (EVEN)
Digital Image Processing (EEE F435), 2021-22, Semester-I (ODD) [160 students]
Communication Systems Lab, 2021-22, Semester-I (ODD) [64+71 students]
Electrical Sciences (EEE F111), 2020-21, Semester-II (EVEN)
Analog Electronics Lab, 2020-21, Semester-II (EVEN)

Digital Image Processing (EEE F435), 2020-21, Semester-I (ODD)
Communication Systems Lab, 2020-21, Semester-I (ODD)
Digital Image Processing (EEE F435), 2019-20, Semester-II (EVEN)
Electrical Sciences (EEE F111), 2019-20, Semester-II (EVEN) [Co-Instructor with Mr. Vivek Chandran]

Digital Image Processing (EEE F435), 2019-20, Semester-I (ODD)
Electromagnetic Fields and Microwave Engineering (ECE F314), 2019-20, Semester-I (ODD) [Co-Instructor with Dr. Sudeep Baudha]
Communication Systems Laboratory, 2019-20, Semester-I (ODD)
Digital Image Processing (EEE F435), 2018-19, Semester-II (EVEN)
Electrical Sciences (EEE F111), 2018-19, Semester-II (EVEN)
Digital Image Processing (EEE F435), 2018-19, Semester-I (ODD)
Introduction to Artificial Neural Networks (MEL G622), 2018-19, Semester-I (ODD)
[Co-Instructor in Telepresence Course from Dr. Anantha krishna, Pilani Campus]
Communication Systems Laboratory, 2018-19, Semester-I (ODD)
Electromagnetic Fields and Waves (EEE F433), 2017-18, Semester-II (EVEN)
Electrical Sciences (EEE F111), 2017-18, Semester-II (EVEN)
Electromagnetic Fields and Waves (EEE F433), 2017-18, Semester-I (ODD)
Communication Systems Laboratory, 2017-18, Semester-I (ODD)

Courses Taught

Involved in teaching undergraduates and post graduate students enrolled in M.Sc dual degree and PhD program.

CHEM F111: General Chemistry (Quantum Chemistry, spectroscopy, basic organic chemistry, coordination chemistry)

CHEM F110: Chemistry Laboratory (laboratory experiments in the rea of organic, inorganic and physcial chemistry)

CHEM F212: Organic Chemistry-I (Physical aspects of organic reactions and functional group chemistry)

CHEM F242: Chemical Experimentation-I (Analysis, synthesis, estimation, purification of organic compounds)

CHEM F313: Organic Chemistry-III (Reagent Chemistry and Retrosynthetic Analysis)

CHEM F 342: Organic Chemistry-IV (Chemistry of biomolecules and selected Heterocyclic compounds)

CHEM F415: Frontiers in Organic Synthesis (Advance topics of organic chemistry)

BITS G561: Heterocyclic Chemistry (Advanced course on heterocyclic chemistry)

CHEM G551: Advanced Organic Chemistry (Advanced topics in organic chemistry)

Courses Taught

Nanobiotechnology

Recombinant DNA Technology

Genetic Engineering Techniques

Experiments in Biotechnology

Introduction to Pharmaceutical Biotechnology

Cell and Tissue Culture

General Biology

Biology Lab

Courses Taught

General Biology (BIO C111)
Biological Chemistry (BIO 211)
Measurement Techniques I (TAC 211)
Bio Project Lab (BIO C231)
Ecology (BIO C322)
General Physiology (BIO C342)
Cell and Tissue Culture Technology (BIO C352)
Instrumental Methods of Analysis (BIO C391)
Immunology (BIO C416)
Food Biotechnology (BIO T424)
Laboratory (BIO C411)
Molecular Immunology (BIO CG514)
Public Health and Diseases (MPH G513)
Cell and Tissue Culture Technology (BIOG641)
Cancer Biology (BIO G526)
Animal Cell Technology (BIO G524)
Biology Laboratory (BIO F110)
Lab Oriented Project (BITS C323)
Professional Practice I (BITS G 620)
Professional Practice II (BITS G621)
Dissertation (BITS G561 T)
Study in Advanced Topics (BIO G513)

Courses

Undergraduate Courses Taught

Electrical Sciences (first year introductory course to electrical engineering)
Electronic Devices (Second year course on semiconductor devices)
Digital Design (Second year course on digital electronics)
Microprocessors and Interfacing (Second year course on intel's x86 microprocessors)
Internet of Things (Elective course for senior students)

Undergraduate Labs taken

Digital Design
Analog Electronics
Microprocessors and Interfacing
Internet of Things

Graduate Courses

Physics and Modeling of Microelectronic Devices
Advanced VLSI Design
IC Fabrication Technology
Advanced Analog and Mixed Signal Design

UG courses taught

Biological Chemistry
Proteomics
Immunology
Experiments in Biotechnology
Instrumental Methods of Analysis
General Biology (Foundation course)
Biology Laboratory (Foundation course)

Courses Taught

Sl. No.	COURSE	UG/PG/WILP
1	CHE G558 CHEMICAL PROCESS OPTIMIZATION	PG
2	CHE F342 PROCESS DYNAMICS AND CONTROL	UG
3	CHE F471 ADVANCE PROCESS CONTROL	UG
4	CHE F313 SEPARATION PROCESSES - II	UG
5	CHE F312 CHEMICAL ENGINEERING LAB - I	UG
6	CHE G533 PETROLEUM PRODUCT CHARACTERIZATION	PG
7	CHE F341 CHEMICAL ENGINEERING LAB - II	UG
8	CHE F244 SEPARATION PROCESSES - I	UG
9	CHE G617 PETROLEUM REFINERY ENGINEERING	PG
10	CHE C473 ADVANCE PROCESS CONTROL	UG
11	CHE C441 PROCESS CONTROL	UG
12	PECF/PEHZ ZC351 MASS TRANSFER	WILP
13	CHE C361 MASS TRANSFER OPERATIONS	UG
14	CHE G614 ADVANCED HEAT TRANSFER	PG
15	ES C112 THERMODYNAMICS	UG
16	CHE C413 PROCESS PLANT SAFETY	UG
17	CHE G512 PETROLEUM REFINING & PETROCHEMICALS	UG
18	ET ZC362 ENVIRONMENTAL POLLUTION CONTROL	WILP
19	CHE F418 MODELING AND SIMULATION IN CHEMICAL ENGG	UG
20	CHE F343 PROCESS DESIGN PRINCIPLES - II	UG
21	PEVA ZC453 PROCESS CONTROL AND INSTRUMENTATION	WILP
22	PEHZ ZC383 EXTRACTIVE METALLURGY	WILP
23	HUM C383 SRIMAD BHAGAVAD GITA	UG
24	CHE F211 CHEMICAL PROCESS CALCULATIONS	UG

Education – Courses Taught

Ph.D. (Chemical Engineering), BITS-Pilani
M.E. (Chemical Engineering), BITS-Pilani
B.Tech. (Chemical Engineering), Beant College of Engineering & Technology, Gurdaspur, Punjab

Projects

PhD Thesis

Studies on Biodegradation and Biofiltration for Removal of Volatile Organic Compounds

M.E. Dissertation

Studies on Biofiltration for Removal of Volatile Organic Compounds (VOCs)

Working Computer Knowledge

Professional Packages : ASPEN ONE, MATLAB, MS Office, ORIGIN
Operating Systems : DOS, WINDOWS

Professional Experience

Institution	Position	Period
Institution	Position	From	To
BITS Pilani	Professor, Department of Chemical Engineering	March, 2023	Till date
BITS Pilani	Associate Professor, Department of Chemical Engineering	August, 2018	February, 2023
BITS Pilani	Assistant Professor, Department of Chemical Engineering	July, 2010	July 2018
BITS Pilani	Lecturer, Department of Chemical Engineering	June, 2004	June, 2010
BITS Pilani	Assistant Lecturer, Department of Chemical Engineering	July, 2003	M

Courses Taught

S.No.	Course Title and Course No.	Postgraduate or Undergraduate
	Environmental Management Systems – CHE G 513	PG
	Environmental Management Systems - EE ZG515/SSTM ZG527	WILP Course
	Environmental Sampling and Analytical Methods - SSTM ZG516	WILP Course
	Polymer Technology – CHE G 522	PG
	Thermodynamics – BITS F 111	UG
	Structures & Properties of Materials	UG
	Chemical Process Calculations – CHE F 211	UG & WLPD
	Process Design Decisions	UG
	Environmental Pollution Control – CHE F 411 & ET ZC 362	UG & WLPD
	Heat Transfer – CHE F 241	UG
	Heat Transfer and Fluid Mechanics Lab	UG
	Chemical Process Technology – CHE F 419	UG
	Advanced Separation Techniques – CHE G 551	PG
	Engineering Chemistry – CHE F 214	UG
	Nanotechnology for Renewable Energy and Environment – BITS F 429	PG & UG elective
	Biochemical Engineering – CHE F 421	UG
	Process Design Principles – CHE F 314	UG
	Environmental Studies (BITS F225)	UG
	Research Methodology (BITS G661)	PG
	Chemical Engineering Lab – II CHE F 341	UG

Courses Taught: TelePresence Courses (Pilani, Goa & Hyderabad campuses)

VLSI Architectures

Reconfigurable Computing

Hardware Software Co-Design

Courses Taught: On Campus Courses

VLSI Architectures

Reconfigurable Computing

Hardware Software Co-Design

Computer Architecture

Digital Design

Digital Electronics and Computer Organization

Microprocessors Programming and Interfacing

Embedded Systems

Microelectronic Circuits

Electrical Sciences

Electrical Sciences-I

Electrical Sciences-II

Measurement Techniques-II

Digital Electronics and Microprocessors

Analog Electronics

Antennas and Wave Propagation

Audio and Video Engineering

Courses taught: UG

Academic Year	Semester	Theory	Laboratory
2020-21	Odd	BITS F111 Thermodynamics	ME F110 Workshop Practice
		ME F212 Fluid Mechanics
2019-20	Even	BITS F111 Thermodynamics	ME F110 Workshop Practice
	Odd	BITS F111 Thermodynamics	ME F110 Workshop Practice
		ME F415 Gas Dynamics
2018-19	Even	BITS F111 Thermodynamics	ME F110 Workshop Practice
		ME F482 Combustion
	Odd	BITS F111 Thermodynamics	ME F110 Workshop Practice
		ME F212 Fluid Mechanics
2017-18	Even	BITS F111 Thermodynamics	ME F110 Workshop Practice
		ME F482 Combustion
	Odd	ME F311 Heat Transfer	ME F110 Workshop Practice
		ME F420 Power Plant Engineering

Teaching engagement

2020: 1. Machine Tool Engineering (IC)

2. Engineering Optimization (I)

3. Engineering Graphics (I)

2021: 1. Machine Tool Engineering (IC)

2. Engineering Optimization (IC)

3. Engineering Graphics (I)

2022: 1. Advanced Manufacturing Process (IC)

2. Engineering Optimization (IC)

3. Manufacturing Process Laboratory (I)

2023: 1. Manufacturing Process (I)

2. Manufacturing Process Laboratory (I)

2024: 1. Advanced Manufacturing Process (IC)

2. Advanced Manufacturing Process laboratory (IC)

Teaching

Courses Taught

S.No	Course Name	Year
1	Electrical Sciences – I	2009-2010 2011-2012
2	Measurement Technique – II	2009-2010
3	Circuits and Signals	2009-2010
4	Microprocessors and Interfacing	2009-2010 2014-2015 2015-2016 2016-2017 2017-2018 2018-2019 2019-2020 2020-2021
5	Microelectronic Circuits	2010-2011
6	Power Electronics	2010-2011
7	Digital Image Processing	2011-2012 2012-2013 2013-2014 2014-2015 2015-2016 2016-2017 2017-2018 2018-2019 2019-2020 2020-2021
8	Electrical Sciences	2011-2012
9	Microelectronic circuits	2010-2011 2012-2013 2013-2014
10	Electronic Devices	2012-2013
11	Communication Systems	2014-2015 2015-2016 2016-2017 2017-2018 2018-2019 2019-2020 2020-2021 2021-2022
12	Network Security (M.E Software Systems)	2012-2013
13	VLSI Design (M.E Microelectronics)	2014-2015 2016-2017 2019-2020 2020-2021
14	Embedded System Design	2015-2016 2018-2019
15	Analog IC Design	2016-2017
16	Reconfigurable Computing	2017-2018 2019-2020
17	Digital Design	2021-2022
18	Hardware Software Co-Design	2012-2013
19	Internet of Things	2022-2023

Courses

Plant Biotechnology (BIO G643)
Genetic Engineering Techniques (BIO F418)
Plant Physiology (BIO F312)
General Biology (BIO F111)
Biology Laboratory (BIO F110)

Plant Biotechnology (BIO G643)
General Biology (BIO F111)
Genetic Engineering Techniques (BIO F418)

Plant Biotechnology (BIO G643)
General Biology (BIO F111)
Genetic Engineering Techniques (BIO F418)

Plant Biotechnology (BIO G643)
General Biology (BIO F111)
Genetic Engineering Techniques (BIO F418)

Courses

CE F243: Soil Mechanics
CE F313: Foundation Engineering
BITS F110: Engineering Graphics
CE F376/377: Design Project

Courses

Econometric Methods
Economics of Growth & Development
Game Theory & Its Applications
Industrial Economics
International Economics
Mathematical and Statistical Methods
Principles of Economics

Courses Taught

BIOT F243 - Genetics
BIOT F242 - Introduction to Bioinformatics
BIO F110 - Biology Laboratory
BIO F111 - General Biology
BIO G612 - Human Genetics

Teaching

Courses I have taught till now

At BITS Pilani Hyderabad Campus -

Introduction to Globalization
Urban Policy and Governance
Public Policy
Housing: programs, policies and practices

Elsewhere -

Sustainability in Practice
Housing: Planning and Policy
Infrastructure Studies

Courses that I would be teaching in the upcoming semester: Jan-May 2025

Housing: programs, policies and practices
Public Policy

Courses Taught

First Semester (2024-25):

Instructor for MATH F211: Mathematics - III
Tutor for MATH F111: Mathematics - I

Second Semester (2023-24):

Instructor for MATH F231: Number Theory
Tutor for MATH F113: Probability & Statistics

First Semester (2023-24):

Instructor for MATH F211: Mathematics - III
Tutor for MATH F111: Mathematics - I

Second Semester (2022-23):

Tutor for MATH F112: Mathematics - II
Tutor for MATH F113: Probability & Statistics

Teaching

Spring Semester 2024

Course - Analog Electronics

Tutorial- Analog Electronics

Lab 1 - Analog Electronics Laboratory

Lab 2 - Control Systems Laboratory

Fall Semester 2023

Course 1 - Electronics Instruments and Instrumentation Technology

Tutorial- Electronics Instruments and Instrumentation Technology

Lab 1 - Electronics Instruments and Instrumentation Technology lab

Lab 2 - Internet of Things lab

Spring Semester 2023

Course 1 - Industrial Instrumentation and Control

Tutorial 1 - Industrial Instrumentation and Control

Tutorial 2 - Analog Electronics

Fall semester 2022

Course 1 - Digital design

Tutorial- Digital design

Lab- Digital Design Laboratory

Spring Semester 2022

Course 1 - Industrial Instrumentation and Control

Tutorial- Industrial Instrumentation and Control

Lab- Internet of Things lab

Fall semester 2021

Course 1 - Digital design

Course 2 - Internet of Things

Tutorial- Digital design

Lab- Digital Design Laboratory

Summer Term:

Course and Lab: Analog Electronics

Spring Semester 2021

Course - Analog Electronics

Tutorial- Analog Electronics and Electrical Sciences

Lab- Analog Electronics Laboratory

Fall semester 2020

Course - Analog Electronics

Tutorial- Analog Electronics and Electrical Sciences

Lab- Analog Electronics Laboratory

Spring semester 2020

Course - Electrical Sciences

Tutorial- Electrical Sciences

Lab- Analog Electronics Laboratory

Fall semester 2019

Course- Transducers and Measurement systems

Tutorial- Transducers and Measurement systems and Digital design

Lab- Electronics Instrumentation Laboratory and Digital design Laboratory

Spring semester 2019

Course- Analog Electronics

Tutorial- Analog Electronics

Lab- Analog Electronics Laboratory

Fall semester 2018

Course- Transducers and Measurement systems

Tutorial- Transducers and Measurement systems and Electrical Sciences

Lab- Electronics Instrumentation Laboratory

Courses taught prior to joining BITS

Electrical Circuits
Electrical Machines
Control Systems
Measurements and Instrumentation
Electrical Engineering
Mechatronics
Power System Protection
Special Machines and Electrical Drives
Electromagnetic Theory
Digital Logic circuits
Linear Integrated Circuits
Digital Signal processing

Teaching

Courses Taught:

Advanced Calculus

Operations research

Linear Algebra

Complex Variables

Differential equations

Optimization

Probability and Statistics

Qualitative Properties of Ordinary Differential Equations

Partial differential equations

Numerical Analysis

Quantum Information and Computing

Mathematical Foundations for Data Science

UG Courses Taught

Second Semester 2021 - 2022

Control System Lecture F242
Control System Tutorial F242
Electrical and Electronics Lab F246
Analog Electronics Lab F341

First Semester 2022 - 2023

Digital Design Lecture F215
Digital Design Tutorial F215
Digital Design Lab F215

First Semester 2023 - 2024

Digital Design Lecture F215
Digital Design Tutorial F215
Digital Design Lab F215

First Semester 2024 - 2025 (Ongoing)

Digital Design Lecture F215
Digital Design Tutorial F215
Digital Design Lab F215
Internet-Of-Things Lab F411

Second Semester 2021 - 2022 (Summer)

Electrical Science Lecture F111

Second Semester 2022 - 2023

Control System Lecture F242
Control System Tutorial F242
Control System Lab F245

Second Semester 2023 - 2024

Industrial Instrumentation and Control Lecture F343
Industrial Instrumentation and Control Tutorial F343
Digital Fundamentals Course F235 (BITS-RMIT Program)

Teaching

First Degree Courses

CE F214 Construction Materials
CE F244 Highway Engineering
CE F425 Airport, Railways and Waterways Engineering
BITS F110 Engineering Graphics

Higher Degree Courses

CE G534 Pavement Material Characterization
CE G518 Pavement Analysis and Design
CE G546 Highway Construction Practices
CE G545 Airport planning and design
CE G567 Highway Design
CE G570 Highway Construction Technology

WILP Courses

TEPWGZ G534 Pavement Material Characterization
TEPWGZ G546 Highway Construction Practices
TEPWGZ G521 Environmental Impact Assessment

Courses

Undergraduate Level :

Mechanics of Solids
Transport Phenomena -I
Analysis of Structures
Design of Concrete Structures
Design of Steel Structures
Construction Planning & Technology
Civil Engineering Materials
Transportation Engineering
Hydraulics and Fluid Mechanics
Introduction to Finite Element Method
Introduction to Bridge Engineering

Post Graduate Level :

Finite Element Analysis
Bridge Engineering
Matrix Methods in Civil Engineering
Topics in Structural Engineering
Theory of Elasticity and Plasticity
Theory of Plates and Shells
Advanced Structural Analysis
Advanced structural Design
Earthquake Resistant Design
Structural Dynamics
Advanced Concrete Structures

Courses

At Arizona State University

CEE 353 : Civil Engineering Materials (Summer 2017 and Summer 2018)

At BITS-Pilani, Hyderabad Campus

AY 2023-24

1st Semester
- CE G567 : Highway Design (M.E. 1st Year)
2nd Semester
- CE G570 : Highway Construction Technology (M.E. 1st Year)
- CE F244 : Highway Engineering Lab (B.E. 2nd Year)

Current Courses

Separation Process II (CHE F313)

Past Courses

Thermodynamics (BITS F111)
Environmental Studies (BITS F225)
Chemical Process Calculations (CHE F211)
Heat Transfer (CHE F241)
Kinetics and Reactor Design (CHE F311)
Chemical Engineering Lab II (CHE F341)
Alternate Energy Resources (CHE G532)
Reaction Engineering (CHE G641)
Study Oriented Project (CHE F266)
Lab Oriented Project (CHE F366/F367)
Design Oriented Project (CHE F376/F377)
Unit operations-I (PE ZC319)
Unit Operations-II (PE ZC320)

Teaching

Aug-Dec 2024 CS F111 Computer Programming
May-July 2024 (Summer Term) CS F351 Theory of Computation
Jan-May 2024 CS F363 Compiler Construction
Aug-Dec 2023 CS F351 Theory of Computation
Aug-Dec 2023 CS F222 Discrete Structures for Computer Science
May-Jul 2023 (Summer Term) CS F351 Theory of Computation
Jan-May 2023 CS F363 Compiler Construction
Jan-May 2023 CS F211 Data Structures and Algorithms
Aug-Dec 2022 CS F351 Theory of Computation
Jan-May 2022 CS F363 Compiler Construction
Jan-May 2022 CS F364 Design and Analysis of Algorithms
Aug-Dec 2021 CS F222 Discrete Structures for Computer Science (IC)
Jan-May 2021 CS F363 Compiler Construction

PHAG537: PARENTERAL PRODUCT DEVELOPMENT

POM ZG515: PHARMACEUTICAL ADMINISTRATION & MANAGEMENT (WILP)

PHA G616: PHARMACEUTICAL ADMINISTRATION & MANAGEMENT

PHA F244 PHYSICAL PHARMACY

Faculty Teaching

Separation Process II
Chemical Process Technology
Materials Science and Engineering
Corrosion Engineering
Environmental Pollution Control
Process Plant Safety
Engineering Chemistry
Chemical Engineering Laboratory I
Chemical Engineering Laboratory II

Courses

Electromagnetic Fields and Microwave Engineering (IC and Instructor)
Electromagnetic Theory (IC and Instructor)
IC Fabrication Technology (IC)
IC Fabrication Technology (WILP- IC)
RF Microelectronics (IC)
Signal & System (Instructor)
Microelectronic Circuits (Instructor)
Electrical Science (Instructor)
Analog Electronics (Instructor)
Electronic Devices (Instructor)

–

Core Courses

Classical Mechanics (in Current Semester)
Atomic and Molecular Physics
Electromagnetic Theory - I
Electromagnetic Theory - II
Mathematical Methods of Physics

Elective Courses

Quantum Optics
Advanced Electrodynamics
Plasma Physics and its Applications
Lasers and Applications

First Year Tutorials

Mechanics Oscillations and Waves
Mathematics - II (Linear Algebra and Complex Analysis)

Laboratory Courses

Modern Physics Lab
Electricity, Magnetism and Optics Lab
Physics Lab (First Year)

Courses

Birla Institute of Technology and Science, Pilani, Rajasthan, INDIA

On-Campus:

Courses Taught (July, 2007 - May, 2024):

S. No.	U.G. Course	P.G. Course
1.	Mechanics of Solids (CE F211) Lecture	Prestressed Concrete Structures (CE G614) Lecture
2.	Design of Steel Structures ( CE F343) Lecture, Tutorial	Pavement Material Characterization (CE G534) Lecture
3.	Analysis of Structures (CE C241) Lecture, Tutorial	Advanced Steel Structural Analysis (CE G612) Lecture
4.	Engineering Graphics (TA C111) Tutorial & Practical	Infrastructure Planning and Management (CE G520) Lecture
5.	Measurement of Technique-II (TA C222) Practical	Advanced Concrete Structures (CE G613) Lecture
6.	Civil Engineering Practice (TOC C213) Lecture	Advanced Structural Design (CE G554) Lecture
7.	Structural Dynamics (CE F432) Lecture	Dynamics of Structures (CE G551) Lecture
8.	Design of Concrete Structures (CE C381) Lecture, Tutorial & Practical	Advanced Structural Analysis (CE G617) Lecture
9.	Design of Bridge Structures (CE C422) Lecture	Earthquake Engineering (CE G615) Lecture
10.	Construction Materials (CE F214) Lecture & Tutorial	Advanced Structural Mechanics & Stability (CE G552)
11.	Computer Applications in Civil Engineering (CE F416) Lecture
12.	Introduction to Finite Element (CE F435) Lecture

Courses Teaching in the First Semester 2024-25:

Mechanics of Solids (CE F211) Lecture and Tutorial
Analysis of Structures (CE F241) Lecture, Tutorial

Off-Campus:

CEMENT TECHNOLOGY (PEAB ZC382) Second Semester 2011-12

Birla Institute of Technology and Science, Pilani, Rajasthan, INDIA

On-Campus:

Courses Taught (July, 2007 – May, 2023):

Current Semester

Tutorial: Thermodynamics BITS F111

Lab : Physics Lab

Courses

Dynamics of Social Change
Introduction to Globalization
Introduction to Anthropology
Introduction to Development Studies
Urban Policy and Governance
Development Theory
Understanding Indian Society
Sociological theories
Development Sociology
International Relations
Constitution of India

Aug 2018 onwards Assistant Professor, Gr-I, Professor, Civil Engineering, BITS, Pilani, Rajasthan. COURSES TAUGHT Engineering Graphics, Soil Mechanics, Foundation Engineering, Hydraulic Engineering, Design of Concrete Structures, Geotechnical Earthquake Engineering & Machine Foundation, Civil Engineering Materials.

Jan 2016 onwards Assistant Professor, Gr-I, Civil Engineering, BITS, Pilani, Rajasthan. COURSES TAUGHT Engineering Graphics, Soil Mechanics, Water and Wastewater Treatment, Foundation Engineering, Hydraulic Engineering.

Aug. 2007 – Dec. 2015 Assistant Professor, Civil Engineering, BITS, Pilani, Rajasthan. COURSES TAUGHT Engineering Graphics, Measurement Techniques-II, Mechanics of Solids, Fluid & Solid Mechanics, Civil Engineering Practice, Soil Mechanics, Foundation Engineering, Construction Planning & Technology, Practice School-I, Soil Mechanics & Foundation Engineering, Water & Wastewater Treatment.

Jan 1996 – July 2007 Lecturer, Civil Engineering, BITS, Pilani, Rajasthan. COURSES TAUGHT Engineering Graphics, Mechanics of Solids, Transport Phenomenan-I, Civil Engineering Practice, Soil Mechanics & Foundation Engineering, Environmental Conservation, Measurement Techniques-II.

Sept. 1994-Dec. 1995 Assistant Lecturer, Civil Engineering, BITS, Pilani, Rajasthan. COURSES TAUGHT Engineering Graphics, Mechanics of Solids, Advanced Soil Mechanics, Environmental Conservation.

Sept. 1990-Dec. 1992 Teaching Assistant, Dept. of Civil Engineering, Lehigh University, Bethlehem, PA, USA. COURSES HANDLED Fundamentals of Environmental Pollution, CE Planning and Engineering Economics, Soil Mechanics, Foundation Engineering.

Teaching Courses

1. Mathematics Laboratory at IIT Ropar

2. Mathematical Modeling and Simulation, Differential Equations and Applications at DA-IICT Gandhinagar

BITS-Pilani, Hyderabad Campus

2018-2019 (First Semester)

Algebra I (MATH F215) (Tutorial: FB 6.36/10), Mathematics III (MATH F211) (Tutorial: FB 9.75/10, 5.5/10)

2018-2019 (Second Semester)

Probability & Statistics (MATH F113) (Tutorial: FB 9.88/10, 10/10), Mathematical Methods (MATH F241) (Lecture: FB 6.86/10, Tutorial: FB 7.27/10),

2019-2020 (First Semester)

Algebra I (MATH F215) (IC) (Lecture: FB 8.65/10, Tutorial: FB 8.62/10), Mathematics III (MATH F211) (Lecture: FB 10/10, Tutorial: FB 10/10)

2019-2020 (Second Semester)

Mathematical Methods (MATH F241) (IC) (FB NA), Probability & Statistics (MATH F113) (FB NA)

2020-2021 (First Semester)

Algebra I (MATH F215) (Lecture: FB 9.38/10, Tutorial: FB 9.5/10), Mathematics III (MATH F211) (IC) (Lecture: 8.79/10, Tutorial: 9/10), Mathematical Fluid Dynamics (MATH F445) (IC) (Lecture: FB 10/10)

2020-2021 (Second Semester)

Mathematical Methods (MATH F241) (IC) (Lecture: FB 9.65/10, Tutorial: FB 10/10), Probability & Statistics (MATH F113) (Lecture: FB 8.68/10, Tutorial: FB 8.8/10), Mathematical Modeling (MATH F420) (IC) (Lecture: FB 9.93/10), Mathematical Modeling (MATH F420 Summer-Term) (IC) (Lecture: FB 9.88/10)

2021-2022 (First Semester)

Mathematical Modeling (MATH F420) (IC) (Lecture: FB 9.7/10), Mathematics III (MATH F211) (Lecture: 9.37/10), MATHEMATICS I (MATH F111) (Lecture: FB 7.47/10)

2021-2022 (Second Semester)

Mathematical Modeling (MATH F420) (IC) (Lecture: 9.99/10)

2022-2023 (First Semester)

Introduction to Statistical Methods (BA ZC413) (WILP Course) (IC) (Course Rating: 4.13/5, Faculty Rating: 3.88/5) (Candidates provided feedback: 23 out of 27)

Mathematics III (MATH F211) (Lecture: 7.71/10)

2022-2023 (Second Semester)

Mathematical Modeling (MATH F420) (IC) (Lecture: 9.64/10)

2023-2024 (First Semester)

Mathematical Modeling (MATH F420) (IC) (Lecture Feedback: 10/10, Candidates provided feedback: 8 out of 35)

Mathematics III (MATH F211) (Lecture Feedback: 9.95/10, Candidates provided feedback: 11 out of 120)

2023-2024 (Second Semester)

Introduction to Statistical Methods (BA ZC413) (WILP Course) (IC) (Course Rating: 4.19/5, Faculty Rating: 4.12/5) (Candidates provided feedback: 17 out of 21)

Courses Taught

I have been involved in teaching a number of courses, both at the undergraduate and graduate levels at BITS Pilani, some of them are as follows-

Chemistry I (CHEM C141)
Chemistry II (CHEM C142)
Chemical Project Lab (CHEM C231)
Measurement Techniques -1 (TA C211)
Biophysical Chemistry (CHEM C341 and CHEM F323)
Advanced Inorganic Chemistry (CHEM G553)
General Chemistry (CHEM F111)
Inorganic Chemistry III (CHEM F343)
Chemistry Laboratory (CHEM F110)
Chemical Experimentation-1 (CHEM F242)
Instrumental methods of analysis (CHEM F313)
Laboratory Project (CHEM F366 and CHEM F367)
Study Project (CHEM F266)

Research Exposures

Attended University Immersion (abroad) Programme (a new initiative by BITS Pilani) at Trinity College Dublin , Ireland from 19th May to 14th July, 2015.
Worked on advanced equipments and research technologies during the period.
Worked on Willow plant for cleaning of Nitrate, Phosphate and Organic matter from sewage.
Learned the new sampling techniques.
Exposed to new equipments.
Learned the new pedagogy techniques.

Teaching Interests

Environment and Water Resources Engineering
Design of Water and Wastewater Treatment Plants
Solid and Hazardous Waste Management
Air Pollution Abatement and modeling
Environmental Impact Assessment
Open Channel Flow

Subjects Taught

CS F301 Principal of Programming Language

CS F213 Object Oriented Programming

CS F303 Computer Network

BITS F464 Machine Learning

CS G513 Network Security

CS F211 Data Structure and Algorithms

CS F342 Computer Architecture

Teaching :

2023-24 Semester I : Mechanics of Waves and Oscillations (MeOW) Tutorials

2023-24 Semester II: a) Group Theory and Applications (PHY F422), Advanced Elective

b) Mathematics II, Tutorials

2024-25 Semester I: a) Introduction to Quantum Field Theory (PHY F412), Advanced Elective

b) Mechanics of Waves and Oscillations (MeOW) Tutorials

Teaching

Courses Taught

S. No.	Title of course taught	Postgraduate or Undergraduate	Sole instructor or with others	Year
1	Advanced Mass Transfer	PG	Sole instructor	2004-2013
2	Advance Heat Transfer	PG	Sole Instructor	2009-2011
3	Professional Practice – I	PG	With others	2004-2011
4	Professional Practice – II	PG	Sole Instructor	2007
5	Advanced Transport Phenomena	PG	Sole instructor	2015-2017
6	Mathematical Methods in Chemical Engineering	PG	Sole Instructor	2014-2022
7	Fluid Mechanics	UG	Sole Instructor	2017-2021
8	Numerical Methods for Chemical Engineers	UG	Sole Instructor	2018-2022
9	Heat Transfer	UG	Sole Instructor	2008-2011, 2017, 2018
10	Chemical Process Technology	UG	Sole instructor	2004-2009
11	Process Dynamics and Control	UG	Sole instructor	2012 – 2014
12	Transport Phenomena	UG	Sole instructor	2013- 2018
13	Computer Aided Process Plant Design	UG	Sole instructor	2004
14	Selected Chemical Engineering Operations	UG	With others	2006-2007
15	Structure & Properties of Materials	UG	With others	2003-2004
16	Thermodynamics	UG	With others	2003
17	Kinetics and Reactor Design	UG	With others	2009-2011
18	Process Design Principles - II	UG	With Others	2019
19	Chemical Engineering Laboratory - II	UG	With others	2018
20	Mass Transfer Operations	To the employees of HZL, Udaipur & CFCL, Kota	Sole instructor	2007-2009
21	Heat Transfer Operations	To the employees of TCL, Babrala & To the employees of Aditya Birla Group, Cement Business	Sole instructor	2009, 2011
22	Process Equipment Design	To the employees of HZL, Udaipur & CFCL, Kota & Aditya Birla Group (Cement business)	Sole instructor	2009, 2016
23	Applied Transport Phenomena	To the students of WILP	Sole instructor	2020

Laboratory Program and Courses Developed

Laboratory Developed:

Supply Chain Analytics Laboratory

Minor Program Developed:

Supply Chain Analytics

Courses Developed:

Supply Chain Management
Supply Chain Modelling and Empirical Analysis
Procurement Management

Teaching in Current Semester

Supply Chain Management	On-campus (BE & ME)
Supply Chain Modelling and Empirical Analysis	On-campus (BE)

Courses Taught

Supply Chain Management	(On-Campus: MBA, ME, BE and WILP: MS)
Product Design	(On-Campus: ME & BE)
Design Projects	(On-Campus: ME & B)
Manufacturing Planning and Control	(On-Campus: ME & BE)
Materials Management	(On-Campus: BE and WILP: BS)
Manufacturing Management	(On-campus: BE)
Operations Research	(On-Campus: BE)
Optimization	(On-Campus: BE)
Workshop Practice	(On-Campus: BE)
Production Planning Control	(On-Campus: BE & WILP: BS)
Total Quality Management	(WILP: MS)
Quality Control Assurance and Reliability	(WILP: BS)
Plant Layout and Design	(WILP: MS)
Production Technique Lab	(On-Campus: BE)

Research Area

Supply Chain Management
Green Steel Supply Chain
Agriculture Supply Chain
Lean Manufacturing
Agile Manufacturing
Manufacturing Management
Evolutionary Optimization Techniques
Artificial Intelligent techniques in design of Manufacturing System

The courses taught

I have been associated with the teaching of the following courses:

Electrical Science (lecture and tutorial)
Electrical Machines (lecture and tutorial)
Power Electronics (lecture and tutorial)
Power System (lecture and tutorial)
Control Systems (tutorial)
Digital Design (tutorial)
Electromagnetic Theory (tutorial)
Neural Network and Fuzzy Logic (lecture and tutorial)

Workshops and Courses

Workshops / FDP / Consultancy

Program director cum instructor for 4-day (12 hours) workshop on Moderation, Mediation, and Conditional Process Analysis using Process in R. Organized by Department of Management, BITS Pilani, 8^th – 15^th September 2023 (feedback 4.9/5).

Courses

Data Visualization (using Power BI, DAX included)
Introductory Business Statistics (using R)
Advanced Spreadsheet and Macro Programming for Business (VBA)
Programming for Business (using R)
Marketing Analytics (using R)
Digital Marketing
Marketing Management
Consumer Behavior
Sports analytics/marketing
Entertainment Analytics

Teachings

Teaching (Academic year 2022) at BITS Pilani, Goa campus:

Cyber-Physical Systems (Fall 2022) , Responsibility: Main Instructor
Introduction to logic (Fall 2022), Offered via Coursera platform

Teaching (Academic year 2019-2022) at BITS Pilani campus:

Logic in Computer Science (Fall 2019, Fall 2020, Fall 2021) Responsibility: Main Instructor
Theory of Computation (Fall 2019), Responsibility: Co-Instructor
Software Testing (Summer 2019, Fall 2020, Summer 2021, Fall 2021), Responsibility: Main Instructor
Cyber Physical Systems (,Summer 2022)

Teaching

Undergraduate course
Principles of Economics (ECON F211)
Economic Analysis of Public Policy (ECON F343)
Fundamentals of Finance and Accounting (ECON F212) - Download course handout
Energy Economics [ECON F353]
Macroeconomics [ECON F243]
Economic Growth and Development [ECON F244]
Economic Environment of Business [ECON F214]
Master's level
Managerial Economics [MBA ZC416/ WILP]
Financial and Management Accounting [MBA ZC415/WILP]

Semester-wise Details of the courses taught. [Sl.No Course title Semester Role No.St L=Lecture/T=Tutorial]

Academic Year 2014-15
1 Fundamentals of Finance and Accounting (ECON F212) First IC L+T
2 Managerial Economics MBA ZC416/ WILP First IC L
3 Principles of Economics (ECON F211) Second IC L
4 Economic Analysis of Public Policy (ECON F343) Second IC L+T

Academic Year 2015-16
5 Fundamentals of Finance and Accounting (ECON F212) First IC L+T
6 Managerial Economics MBA ZC416/ WILP First IC L
7 Principles of Economics (ECON F211) Second IC L+T
8 Economic Analysis of Public Policy (ECON F343) Second IC L+T

Academic Year 2016-17
9 Fundamentals of Finance and Accounting (ECON F212) First IC L+T
10 Financial and Management Accounting (MBA G515) First IC L
11 Managerial Economics MBA ZC416/ WILP First IC L
12 Principles of Economics (ECON F211) Second I L
13 Principles of Economics (ECON F211) Second I L+T

Academic Year 2017-18
14 Energy Economics (ECONF353) First IC L
15 Fundamentals of Finance and Accounting (ECON F212) First IC L+T
16 Economic Analysis of Public Policy (ECON F343) Second IC L+T
17 Macroeconomics (ECON F243) Second IC L+T
18 Development Economics (GS F234) Second IC L

Academic Year 2018-19
19 Fundamentals of Finance and Accounting (ECON F212) First IC L+T
20 Economic Analysis of Public Policy (ECON F343) Second IC L+T
21 Economic Growth and Development (ECON F244) Second IC L+T
22 Principles of Economics (ECON F211) Second I T

Academic Year 2019-20
23 Economic Environment of Business (ECONF214) First I L+T
24 Fundamentals of Finance and Accounting (ECON F212) First IC L+T
25 Economic Analysis of Public Policy (ECON F343) Second IC L+T
26 Financial and Management Accounting (MBA ZC415/WILP Second IC L

Academic Year 2020-21
27 Economic Environment of Business (ECONF214) First IC L+T
28 Financial and Management Accounting (MBA ZC415/WILP First IC L
29 Economic Analysis of Public Policy (ECON F343) Second IC L+T
30 Principles of Economics (ECON F211) Second I L

Academic Year 2021-22
31 Fundamentals of Finance and Accounting (ECON F212) First IC --- L+T
32 Financial and Management Accounting (MBA ZC415/WILP First IC --- L
33 Economic Analysis of Public Policy (ECON F343) Second IC --- L+T
34 Principles of Economics (ECON F211) Second IC --- L

Academic Year 2022-23
35 Principles of Economics (ECON F211) First IC --- L
36 Fundamentals of Finance and Accounting (ECON F212) First I --- L+T
37 Economic Analysis of Public Policy (ECON F343) Second IC --- L+T
38 Fundamentals of Finance and Accounting (ECON F212) Second I --- L

Academic Year 2023-24
39 Principles of Economics (ECON F211) First I --- L
40 Fundamentals of Finance and Accounting (ECON F212) First IC --- L+T
41 Economic Analysis of Public Policy (ECON F343) Second IC 82 [1] L+T
42 Fundamentals of Finance and Accounting (ECON F212) Second IC 404 [1] L

Research Interest

Public Policy
Economic Development
Energy Economics

Courses Taught

Kinetics & Reactor Design

Separation Processes I

Process Plant Safety

Petroleum Refining and Petrochemicals

Engineering Chemistry

Polymer Technology

Selected Chemical Engineering Operations

Chemical Process Calculations

Chemical Process Technology

Chemical Engineering Lab I & II

Unit Operations I (WILP)

Research Interest

My research interest includes the development of the numerical methods for the singularly perturbed boundary value problems arising in many applications of science and engineering. Singularly perturbed boundary value problems are those in which the highest order derivative is multiplied by a small parameter ε, known as the perturbation parameter. As ε → 0, the order of the differential equation reduces by at least one and so the solution to the reduced problem fails to satisfy all the boundary conditions. Thus as ε → 0, the solution to these problems has multiple behaviors in the sense that there are the regions where solution changes very rapidly (these regions are called layer regions) otherwise the solution varies slowly (these regions are called outer regions). The classical/standard numerical methods fail to approximate the solution to these problems, so we need to develop non-classical/nonstandard methods for the solution of these problems.

In particular, my research includes the development of the numerical methods for Initial/Boundary Value Problems for Ordinary Differential Equations, Partial Differential Equations, Delay/Advanced Differential Equations, Singularly Perturbed ODEs/PDEs, Fractional Order ODEs/PDEs etc.

Teaching

Courses in Current Semester

Mathematics II (MATH F112)
Partial Differential Equations (MATH F343)

Courses Taught

On Campus

Mathematics I (MATH F111)
Mathematics II (MATH F112)
Mathematics III (MATH F211)
Probability and Statistics (MATH F113)
Mathematical Methods (MATH F241)
Numerical Analysis (MATH F313)
Partial Differential Equations (MATH F343)
Numerical Methodology for Partial Differential Equations (MATH F422)
Numerical Solutions to Ordinary Differential Equations (MATH F444)

Off-Campus

Engineering Mathematics I
Engineering Mathematics II

Teaching

CE F321 Engineering Hydrology

CE F231 Fluid Mechanics Lecture and Tutorial

CE F323 Introduction to Environmental Engineering

BITS F110 Engineering Graphics Lecture and Instructor In Charge

BITS F110 Engineering Graphics Practical

BITS F225 Environmental Studies

WILP (Work Integrated Learning Programmes) Courses

SSTM ZG528 Environmental Impact Assessment

Teaching

My teaching is inspired by the quote below which I was introduced to by my PhD advisor and mentor Prof. R. S. Sreenivas.

If you want to build a ship, don’t drum up people to collect wood and don't assign them tasks and work, but rather teach them to long for the endless immensity of the sea.
- Antoine de Saint-Exupery

Courses at BITS: Digital Design, VLSI Architecture, Microprocessors and Interfacing, Electronic Instruments and Instrumentation Technology.

Courses elsewhere: Mathematical foundations of Data Science, Applied Linear Algebra, Sensors and Actuators, Machine Learning.

Courses Currently Teaching / Previously Taught

CS F111 - Computer Programming
CS F222 - Discrete Structures for Computer Science
CS F214 - Logic in Computer Science
CS F211 - Data Structures and Algorithms
CS F212 - Databases Systems
CS F364 - Design & Analysis of Algorithms
CS F415 - Data Mining
CS F320 - Foundations of Data Science
BITS F464 - Machine Learning

Research Interest

Asymmetric organocatalysis and its synthetic applications.
Development of new synthetic methodology through green processes.
Total Synthesis of natural product having biological importance using organo- and metal catalysis.
Asymmetric synthesis of biologically active heterocyclic compounds.
Design and development of new catalytic reactions.

Courses

Chemistry of Organic Compounds [CHEM C232] [IInd SEM-2011-12]
CHEMISTRY LABORATORY[CHEM F110] [IInd SEM-2011-12]
Structure and Reactivity of Organic Compounds [CHEM C331] [Ist-SEM-2012-13]
General Chemistry [CHEM F111] [Ist- SEM-2012-13]
STEROCHEM & REAC MECH[CHEM C431] [IInd-SEM-2012-13]
Chemical Experimentation I [CHEM F242] [IInd SEM 2012-13]
General Chemistry [CHEM F111] [Ist- SEM-2013-14]
Organic Chemistry -III [CHEM F311] [Ist-SEM-2013-14]
Instrumental Methods of Analysis [CHEM F313] [Ist-SEM-2013-14]
Chemical Experimentation I [CHEM F242] [IInd SEM 2013-14]
Organic Chemistry-II [CHEM F243] [IInd SEM 2013-14]
Advanced Organic Chemistry [CHEM G551] [Ist-SEM-2014-15]
Instrumental Methods of Analysis [CHEM F313] [Ist-SEM-2014-15]
CHEMISTRY LABORATORY[CHEM F110] [IInd SEM-2014-15]

Teaching

My teaching philosophy is based on the proposition that “Teaching is about Learning” and I believe that it is my responsibility as a teacher to provide students with an environment conducive to learning, knowledge that will help them learn and help them in becoming and remaining motivated to learn.

I have taught courses (both at the undergraduate and graduate levels) at BITS Pilani in the areas of General Chemistry and Organic Chemistry. I have also guided first-degree students in their laboratory and study projects. Some of the courses taught by me are:

Chemistry I (CHEM C141)
Chemistry II (CHEM C142)
Chemical Project Lab (CHEM C231)
Measurement Techniques -1 (TA C211)
Chemistry of Organic Compounds (CHEM C232)
Instrumental Methods of Analysis (CHEM C391)
Synthetic Organic Chemistry (CHEM C332)
Stereochemistry & Reaction Mechanism (CHEM C431)
Advanced Organic Chemistry (CHEM G552)
Solid Phase and Combinatorial Chemistry (CHEM G557)
General Chemistry (CHEM F111)
Chemistry Lab (CHEM F110)
Organic Chemistry II (CHEM F243)
Chemical Experimentation-I (CHEM F242)
Organic Chemistry I (CHEM F212)
Green Chemistry and Catalysis (CHEM F337)

Advanced Mechanics of Solids

The course starts with generalized Hooke’s law and three dimensional stress strain relations putting emphasis on Materials-Mechanics linkage to elucidate mechanical properties of materials. It also includes Energy methods; Torsion of non-circular members; Shear center and Asymmetrical bending of beams; Curved beams; Thick cylinders.

Vibrations and Control

Small oscillations of linear dynamical systems, free and forced vibrations of single and multi degree of freedom systems, normal modes and orthogonality relations, generalized coordinates, and Lagrange's equations, matrix formulation, eigenvalue problem, and numerical solutions, transient response of one dimensional systems. Introduction to continuous system, vibration measurement and analysis, closed-loop control, conventional and non-conventional control strategies, transfer function, dynamic response, and stability criteria, state space approach and exposure to simulation tools.

Introduction to Biomedical Engineering

This course provides an introduction to the diverse field of biomedical engineering and its application. We will focus on the topics at the interface between engineering and biomedical science; engineering principles for physiological phenomena. The course initiates with basic understanding of biological systems pertaining to application perspective from engineering discipline. Engineering theories will be applied to explain interaction of the metals, polymers, and ceramics biomaterials with the bodily environment and corresponding surface modifications. Working principles and applications of biosensors, biomedical imaging, and tissue engineering processes will be examined. Application of nanotechnology in biomedical applications will be covered.

Courses

Materials Science and Engineering
Materials Characterization
Advanced Composite Materials
Refrigeration and Air-Conditioning
Applied Thermodynamics
Machine Design and Drawing
Fracture Mechanics
Engineering Optimization
Materials Testing & Technology
Workshop Practice Theory
Thermodynamics
Mechanical Engineering lab
Research Practice

Teaching

First semester 2017-2018: Biochemical Engineering (CHE F421) and Chemical Engineering Lab I
Second Semester 2017-2018: Biochemical Engineering and Physico-Chemical Treatment Principles and Design for Wastewater Systems (WILP course) EEGPC ZG521
First semester 2018-2019: Biological Treatment Principles for wastewater systems (WILP course) and Biochemical Engineering
Second semester 2018-2019: Chemical Engineering Lab II and Biochemical engineeering
First semester 2019-2020: Fluid Mechanics CHE F 212 (along with Prof SS Baral) and Biochemical Engineering
Second semester 2019-2020: Process Equipment Design CHE F 412 and Chemical Engineering Lab II
First semester 2020-2021: Fluid Mechanics CHE F 212 (shared); Biochemical Engineering CHE F421; Environmental Biotechnology EE512
Second semester 2020-21: Environmental Biotechnology EEZG512; Physico-Chemical Treatment Principles and Design for Wastewater Systems EE ZG521
First semester 2021-2022: Biochemical Engineering CHE F421; Physico-Chemical Treatment Principles and Design for Wastewater Systems EE ZG521
Second semester 2021-2022: Physico-Chemical Treatment Principles and Design for Wastewater Systems EE ZG521 and Chemical Engineering Lab II
First semester 2022-2023: Biochemical Engineering CHE F421; Physico-Chemical Treatment Principles and Design for Wastewater Systems EE ZG521

Courses Taught

Courses in Current Session (2022-2023)

EEEF214/INSTR F214/ECE F214: Electronic Devices (Compulsory Discipline Course)
EEE F111: Electrical Sciences (Compulsory Course)
EEE F419: Flexible and Stretchable Electronics (New Elective Course)

Other Courses Taught @ BITS-Pilani

At Undergraduate Level:

EEE F111: Electrical Science
EEE/INSTR F212: Electromagnetic Theory
EEE/INSTR F341: Analog Electronics
EEE/INSTR F214: Electronic Devices
EEE F477: Modelling of Field-Effect Nano Devices
EEE F419: Flexible and Stretchable Electronics
EEE C381: Electronic Devices and Integrated Circuits
ES C241: Electrical Science-I
ES C272: Electrical Science-II
EEE C433: Electromagnetic Fields and Waves
ES C242: Structure and Properties of Materials
TAC 211: Measurement Technique Laboratory
EEE C383: Communication Systems
ENGG C111: Electrical and Electronics Technology
EEE G391: Digital Electronics and Computer Organization Lab
EEE/INSTR F376/F377: Design Project
EEE/INSTR F266: Study Project
EEE F491: Special Project
EEE/INSTR F366/F367: Laboratory Project
BITS F423T/F421T/C441T: First Degree Thesis

At Postgraduate Level:

MEL G631: Physics and Modelling of Microelectronic Devices
EEE F474: Antenna Theory and Design
EEE G581: RF and Microwave Engineering
BITS G629: Higher Degree Dissertation
BITS G540: Research Practice

Teaching

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Courses Taught

Fundamentals of Transport Processes- BTech (Process Engineering)
Fluid Mechanics & Machines- BTech (Manufacturing Technology)
Transport Phenomena- BTech (Manufacturing Technology)
Chemical Engineering Thermodynamics- BTech (Process Engineering)
Chemical Process Calculations- BTech (Process Engineering)
Mass Transfer - BTech (Process Engineering)
Chemical Reaction Engineering- BTech (Process Engineering)
Unit Operation-I- BTech (Process Engineering)
Unit Operation-II- BTech (Process Engineering)
Process Control- BTech (Power Engineering)
Process Control and Instrumentation- BTech (Process Engineering)
Mechanical Technology- BTech (Manufacturing Technology)
Solid Waste Management- MTech (Enviornmental Engineering)
Extractive Metallurgy- BTech (Process Engineering)
Engineering Measurements

New Courses

New Course/Lab Developed

Course Developed (2021): EEE F419-Flexible and Stretchable Electronics: Elective for First Degree (BE-EEE/EI/ECE) and Higher Degree (ME-Microelectronics).
Course Developed (2013): EEE F474-Antenna Theory and Design Course: Elective for Higher Degree (ME-Communication) and First Degree (BE-EEE/ECE).
Lab Developed: Antenna Theory and Design Lab (Softwares used: MATLAB RF Tool Kit; HFSS; CST Studio Hardware used: RF Field-Fox Vector Network Analyzer (26.5 GHz); Anechoic Chamber; Antenna Tool Kit.

Courses

Physics Laboratory: PHY F110
MECH OSCIL & WAVES: PHY F111
Research Methodology: BITS E661
Design Project: PHY F376-77
Compuational Physics - PHY F313
Computational Methods in Physics - PHY F518

Research Interest

Corporate Sustainability
Consumer Behavior
Value Co-creation

Courses

Pricing Analytics
Essentials of Strategic Management
International Business
Legal and Economic Environment of Business
Principles of Management
Global Business Technology & Knowledge Sharing
Business & Society
Advertising and Sales Promotion

Courses

Pharmacology and Toxicology
Pharmacology-II
Molecular Pharmacology
Quality Assurance and Regulatory Affairs
Pharmaceutical Microbiology
Anatomy, physiology and health hygiene
Natural Drugs
Pharmaceutical Analysis

Teaching

Courses Taught/Teaching

PhD

Applied Linguistics
Growth of the English Language
Interpretation of literature
Twentieth Century English Literature

WILP

Technical Communication

Pan African e-Network

English Communication Skills

First Degree

English Language Skills I
English Language Skills II
Critical Analysis of Literature and Cinema
Technical Report Writing
Creative Writing
Language Lab Practice
Cinematic Adaptation

Teaching and Research Experience

February 2013 - Current	Professor Department of Chemistry Birla Institute of Science & Technology, Pilani
August 2010 - January 2013	Associate Professor & Head Chemistry Group, Birla Institute of Science & Technology, Pilani
November 2004 - July 2010	Assistant Professor & Head Chemistry Group, Birla Institute of Science & Technology, Pilani
December 2002 - October 2004	Research Associate, Department of Chemistry & Biochemistry University of Maryland, College Park, USA
December 2000-November 2002	Lecturer Department of Chemistry Birla Institute of Science & Technology, Pilani, India
May 1999 - September 2000	Post-doctoral Fellow University of Texas Austin, USA
August 1997 - April 1999	Post-doctoral Fellow Sam Houston State University Huntsville, TX, USA

Education

April 1993-July 1997	Ph.D., Organic Chemistry Kurukshetra University, Kurukshetra Haryana
June 1991-March 1993	M. Phil.,Organic Chemistry, Grade A Kurukshetra University Kurukshetra Haryana
July 1989-May 1991	M. Sc., Organic Chemistry Kurukshetra University Kurukshetra Haryana

Courses Taught

General Chemistry
Organic Chemistry II
Organic Chemistry III
Organic Chemistry IV
Organic Chemistry & Drug Design
Chemistry I, Chemistry II
Structure and Reactivity of Organic Compounds
Synthetic Organic Chemistry
Stereochemistry & Reaction Mechanism
Measurement Techniques I
Chemistry of Organic Compounds
Chemistry Project Lab
Chemical Experimentation
Instrumentation Methods of Analysis
Pericyclic Reactions .

Research

About Research: Our research interest focuses on design and synthesis of natural and synthetic bioactive nitrogen heterocycles as potent and selective anticancer agents. Recent research efforts aiming towards the use of organoiodines enabled us to discover several efficient protocols leading to easy access of drug-like bioactive heterocycles and natural products. Taking cue from indole-based natural products and synthetic drugs, identified various indolylazoles endowed with anticancer activities ranging from micro to nanomolar IC50 values. Efforts to develop potential photosensitizers resulted in the identification porphyrin macrocycle and boron dipyrromethenes with interesting absorption and emission properties. More recently efforts towards conjugate chemistry provided water soluble cationic porphyrins with remarkable (IC50 in nanomolar range) photocytotoxicity.

Design and Synthesis of Novel Indole-based Heterocycles as Anticancer Compounds
Design and Synthesis of Novel PDE4 Inhibitors
Formation of Carbon-Carbon & Carbon-Heteroatom Bond Leading to Bioactive Heterocycles
Design and Synthesis of BODIPY & Porphyrin Based Photosensitizers

Research Interest

Understanding Tumor Drug Tolerance and Resistance

Our research team is involved in understanding the diverse molecular mechanisms or adaptations of tumor cells contributing to drug tolerance and resistance. In this regard, the following aspects are investigated:

Characterizing signaling and epigenetic adaptations of tumor cells upon drug stress: A toxic drug pressure often results in survival of a very small population of transitorily non-dividing tumor cells that eventually attain proliferative potential to re-populate the tumor. Our research is devoted towards understanding the signalling and epigenetic signatures of these 'tolerant cells' that serve as a pool of resilient cells re-establishing tumor population. We also compare the molecular responses after exposure to a toxic or a sub-toxic chemotherapeutic pressure. In this context, we have taken a next generation sequencing based approach followed up by extensive in silico analysis, and wet lab validations towards identification of druggable targets. Herein, we have observed dynamic alteration in developmentally relevant signaling pathways and modification of histone marks upon drug stress. Their functional implications are investigated. Overall, the understanding of the adaptive strategies of tumor cells upon drug pressure is directed towards identification of probable therapeutic targets preventing drug tolerance, resistance and hence associated recurrence of cancer.
Understanding the role of autophagy during drug stress: The cellular homeostatic process, autophagy has often been implicated in hindering drug sensitivity. However, the precise mechanism- of regulation of autophagy and the latter itself controlling cellular survival under drug pressure is poorly understood. Herein, we monitor autophagy after differential drug pressure in tumor cells. Thereafter, coupled with in silico analysis we identify signaling molecules/proteins regulating or having a crosstalk with autophagy. We further explore how modulating the identified molecules/autophagy can enhance chemotherapeutic sensitivity. In this context, we are further interested to explore the role of selective autophagy-mitophagy upon drug stress.
Exploring the role of master transcription regulator- YAP and LIM protein-Ajuba in drug resistance: Alteration in expression of developmentally active signaling pathways is a hallmark of cancer and associated drug resistance. In this regard, the dys-regulation of Hippo signaling pathway is often associated with cancer. Currently we are exploring the role of Hippo signaling pathway components, like YAP under drug stress and its crosstalk with cellular adaptive strategies. The differential localization of YAP and target genes under its control upon drug pressure is investigated.
Analyzing role of high glucose in tumor drug resistance: Hyperglycemic conditions are often positively correlated with progression of cancer, say pancreatic cancer. Especially, hyperglycemia is known to be associated with drug resistance as well. However, the precise mechanism of how hyperglycemia has an impact on drug resistance is poorly characterized. In this project, we explore alteration in expression of long non-coding RNAs (lncRNAs) with high glucose and explore its role in drug resistance. From in silico analysis and wet lab validation we have shortlisted a set of lncRNAs that are dys-regulated under hyperglycemic conditions in pancreatic cancer cells. Through genetic manipulation, their role in resistance is thereafter investigated. Moving ahead, we explore whether these lncRNAs regulate chromatin dynamics under high glucose conditions thus controlling selective transcription of genes.
Role of GOF p53 in drug resistance: p53 is one of the most important tumor suppressors; however, in over half of human cancers, p53 is inactivated due to mutations. Mutant p53 possess distinctive activities of their own, often not present in the wild-type p53 protein. This endows the mutant proteins with activities that contribute to tumor progression and chemo-resistance. However, the mechanism by which these mutant cancer cells can be sensitized has not been extensively studied. In this project, we explore the potential of regulation of protein homeostasis as a therapeutic strategy to attenuate GOF-p53 mediated effect on drug resistance and survival.
Platelet autophagy and thrombosis: This project explores the role of autophagy and selective autophagy like, mitophagy in low oxygen induced platelet activation and thrombosis. The objective of this project is directed towards reducing and designing an appropriate therapy to prevent hypoxia induced thrombosis in people moving to high altitudes, especially, the soldiers. In parallel we are also investigating platelet and circulating tumor cell (CTC) interaction and its crosstalk with endothelial cells.

Courses

Courses Involved In (2012-2023):

Cancer Biology (for higher degree students)
Stem Cell and Regenerative Biology (for higher degree students)
Recent Developments in Biology (for higher degree students)
General Biology (for 1st degree students)
Animal Physiology (for 1st degree students)
Cell Biology (for 1st degree students)
Advanced Cell and Molecular Biology (for higher degree students)
Developmental Biology (for 1st degree students)
Bio-Lab (for 1st degree students)
IMA (for 1st degree students)

Research Interests

My research interests lie in the following fields:

(e, 2e) processes on atomic and ionic targets
(e, 3e) processes on atomic and ionic targets
Spin dependent effects in ionization processes
Impact Spectroscopy on solid targets
Plasmon in solid
Application of chaos in cryptography

Courses Taught

Courses in the Current Academic Year

In the Second Semester of 2022-23

Nonlinear Dynamics and Chaos (BITS F314)
Mechanics, Oscillations and Wave (PHY F111) T (From March 2023)

In the First Semester of 2022-2023

Mechanics, Oscillations and Wave (PHY F111) L+T (Old students)
Mechanics, Oscillations and Wave (PHY F111) T (New students)

Courses Taught in BITS till now

WILP Courses

Engineering Maths I (Math ZC161)

On Campus Courses

Phy-I (PHY C131)
Mechanics, Oscillations and Waves (PHY F111)
Phy-II (PHY C132)
Measurement Techniques-I (TA C211)
General Physics (PHY C132)
Physics Project Lab (PHY C231)
Classical Mechanics (PHY F212)
Methods of Mathematical Physics-I (PHY C332)
Nonlinear Dynamics and Chaos (BITS C473)
IMA (PHY C391)
Physics Lab (PHYF110)
Atomic and Molecular Physics (PHY F342)
EMT-II (PHY F241)
Mathematics II (MATH F112)
Advanced Quantum Mechanics (PHY F421)

Courses

Current Semester

BITS F111: Thermodynamics (L, T )

Previous Semester

EA C415: Introduction to MEMS
ES C112 : Thermodynamics
ME C211: Applied Thermodynamics
ES C242: Structure and Properties of Materials
ME C314: Power Plant Engineering
MEC331: Transport Phenomena
MEF212 Fluid Mechanics(T)
MEF342: Computer Aided Design(T)
MEF244: Kinematics and dynamics of Machines

Research Interest

MEMS
Electrochemical synthesis of carbon nanotube reinforced metal-matrix composites.
Quantification of carbon nanotube distribution in composites, and microstructure-property correlations.
Characterization of the nanocomposite
Thermo-physical properties of the nanocomposite

Courses

Teaching

On going courses:

Physical Chemistry III (CHEM F244): The first part is based on symmetry, principles of group theory, and its application in molecular spectroscopy and quantum chemistry. Second part is based on comprehensive survey of various approximation methods in quantum chemistry (HF, CI, MPPT, DFT). In addition, basic concepts of molecular mechanics approach is also included.
Chemical Experimentation (CHEM C411):

Courses Taught

Photochemistry and Laser Spectroscopy (CHEM C412):
Course 02 : Chemistry Laboratory
Course 03 : Photochemistry and Laser Spectroscopy

Research Interest

Current Research Focus:

Non-covalent interactions: Hydrogen bonding, halogen bonding etc.
Atmospheric science and astrochemirty.
Design and characterization of ionic receptor molecules.
Competition between charge transfer and proton transfer processes.
The structure and excited state dynamics of cold molecular ions and ion-molecule complexes.

Experimental and theoretical methods:

Spectroscopy of cold molecules using Matrix Isolation:
In our lab we are applying Matrix Isolation Infrared Spectroscopy to study the nature of weak intermolecular hydrogen bonding interactions.The facility consists of a Fourier Transform Infrared Spectrometer, a closed cycle 10K Cryostat.

The components are premixed in the mixing chamber and are then deposited on the spectroscopic window of the cold head of the cryostat where rapid cooling of the mixed gases takes place and forms the matrix. Infrared spectroscopy is performed on the deposited matrix to understand the nature of the interactions.
Simple organic syntheses - involving one or two steps.
Characterization using NMR, IR etc.
Spectroscopic investigations: UV-VIS, Steady state and time-resolved fluorescence.
Theoretical calculations: DFT, MP2, TD-DFT, CC2 etc.

The technique of Matrix Isolation allows us to study reactive intermediates, radicals, strained rings, etc. by trapping and isolating the reactive molecules in a cavity surrounded by one or more layers of inert material (Ar, N2 etc.) thereby inhibiting the diffusion of the substrate. Various spectroscopic techniques, such as, UV- VIS and IR can be used to study the isolated materials.

Courses in Current Semester

2019-20 I
Electromagnetic Theory-I

Courses Taught

Electromagnetic Theory-I (Griffiths)
Solid State Physics (C. Kittel)
Physics I (Mechanics, oscillations and Waves, Klappner and Kolenkow + A P French) - also to class of 400
Physics II (Electricity and Magnetism, Resnick Halloday & Griffiths) also to class of 400
Methods of experimental Physics
Structure and properties of materials (B D Callister)
Physics of Advanced Materials (Kittel, Callister, notes)
Instrumental methods of analysis
IC Fabrication Technology ( for ME microelectronics, Sze)
Electrical sciences (Bobrow)
Advanced Physics Laboratory
Physics (Measurement techniques I) laboratory

Research Interests

Prof. Dalvi has created materials Physics laboratory in the Physics department, dedicated to solid state ionics research. His lab is equipped with characterization facility for Li+ and Na+ ion glass-ceramics, NASICON-polymer hybrid composites for Li+/Na+ ion battery and supercapacitor applications. Recently, all-solid state battery and all-solid state supercapacitor fabrication and testing facilities have also been added.

Current research in progress:

Development and characterization of Na+ ion polymer-NASICON hybrids and Na+ ion batteries
Development and characterization of Li+ ion polymer-NASICON hybrids and Li+ ion batteries
Supercapacitor fabrication and testing
Ionic-Liquid glass composites for all-solid-state battery applications
Sol-gel derived NASICON based systems: fundamentals and applications

Students with CSIR JRF/UGC JRF can directly apply (adalvi@pilani.bits-pilani.ac.in)

Courses

Courses Teaching (First Semester 2023-2024)

Name of the course	About the course	Students/Section
1. Pattern Recognition (BITS 446)	Open Elective course Disciplinary Elective for B5 (MSc Physics)	Total number o registered students ~ 40
2.Phys Lab (PHY 344)	Compulsory lab course to all first year students	Registered students ~ 60
3.FDTS
4.Design Project (PHY 376/377) Laboratory Project (PHY 366) Study Project (PHY 266)

Courses Teaching (Second Semester 2021-2022)

Name of the course	About the course	Students/Section
1.Image Processing(BITS 311)	Open Elective course Desciplinary Elective or CSIS	Total number o registered students ~ 140
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all third year students	Registered students ~ 75
3.DTS
4.Design Project (PHY 376/377) Laboratory Project (PHY 366) Study Project (PHY 266)

Courses Teaching (First Semester 2021-2022)

Name of the course	About the course	Students/Section
1. Ele. Mag. & Opt. Lab(PHY 214)	Compulsory lab course to all MSc Physics students in their 2nd year 1st semester	Total number o registered students ~ 75
2.Thin ilm Technology (PHY 379)	Disciplinary Elective course or Physics students	Registered students ~ 40
3.Projects: DTS/SOP/COP/LOP	Study Project DTS (On-Campus) DTS (O-Campus)	Kaushley Mehra (ID: 2018B2A40641) Deepak Jain (2017B5A30935) Pratyush Goel (2017B5A70899)) Sparsh Jain (2017B5A40892) (Conetto, Singapore)

Courses Teaching (Second Semester 2020-2021)

Name of the course	About the course	Students/Section
1.Image Processing(BITS 311)	Open Elective course Desciplinary Elective or CSIS	Total number o registered students ~ 140
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all third year students	Registered students ~ 75
3.DTS		1. Saumya Garg (2016B5A80736P) 2. Utkarsh Kedia (2016B5A80713P)
4.Design Project (PHY 376/377) Laboratory Project (PHY 366) Study Project (PHY 266)		1. Vishal Alamanda (2016B5A20050P) 2. Aashya (2017B5A30981P) 3. Deepak Jain (2017B5A30935P) 4. Goel Prathyush (2017B5A70899P) 5. Ayush Kumar (2017B5A70761P)

Courses Teaching (First Semester 2020-2021)

Name of the course	About the course	Students/Section
1.Pattern Recognition(BITS 446)	Open Elective course Disciplinary Elective or Physics	Total number o registered students ~ 127
2.Thin ilm Technology (PHY 379)	Disciplinary Elective course or Physics students	Registered students ~ 40
3.Projects: SOP/COP/LOP	Study Project Design Project	Vishal Almanda (ID: 2016B5A20050)

Courses Teaching (Second Semester 2019-2020)

Name of the course	About the course	Students/Section
1.Image Processing(BITS 311)	Open Elective course Desciplinary Elective or CSIS	Total number o registered students ~ 140
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all third year students	Registered students ~ 68
3. Statistical Mechanics (PHY 312)	Compulsory Disciplinary Course, MSc Physics & Minor in Physics
4. Design Project (PHY 376/377) Laboratory Project (PHY 366) Special Project (PHY 491)		1.Neelabh Sinha (2016B5A80600P) 2.Akshika Goel (2016B5A70672P) 3.Isha Saini (2016B5TS0956P) 4.Siddhant Singh (2016B5A70144P) 5.Ayush Agarwal (2016B5A70716) 6.Ankita Chakravarty (2016B5A70701P)

Courses Teaching (First Semester 2019-2020)

Name of the course	About the course	Students/Section
1.Pattern Recognition(BITS 446)	Open Elective course Desciplinary Elective or Physics	Total number o registered students ~ 100
2.Phys Lab (PHY 110)	Compulsory lab course to all irst year students	Registered students ~ 40
3.Projects: SOP/COP/LOP	Study Project Design Project	1. Neelabh Sinha(2016B5A80600P) 2. Akshika Goel(2016B5A70672P) 3. Rama TG (2016B5A40678P) 4. Sushant Kumar (2016B5A40655P)

Courses Teaching (Second Semester 2018-2019)

Name of the course	About the course	Students/Section
1.Image Processing(BITS 311)	Open Elective course Desciplinary Elective or CSIS	Total number o registered students ~ 110
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all MSc Physics students	Registered students ~ 66
3.Projects: SOP/COP/LOP	Lab Project Study Project	1. Aditya Sunil Venikar (2015B5A30724P) 2. Deep Vikas Kulkarni (2015B5A70671P) 3. Ishaan Ahuja (2015B5A80442P) 4. Amaayaa Goswami (2016B5PS0001P) 5. Madhur Wadhwa (2016B5A30727P) 6. Akaash Bist (2016B5A80675P)

Courses Teaching (First Semester 2018-2019)

Name of the course	About the course	Students/Section
1.Computational Physics (PHY 313)	Compulsory Disciplinary Course or Physics Open to all 3rd yr B5 students	Total number o registered students ~ 50
2.MeOW (PHY 111)	Compulsory oundation physics course to all irst degree students	One section
3.(a)Projects: SOP/COP/LOP	Design Project	1. Aditya Sunil Venikar (2015B5A30724P) 2. Deep Vikas Kulkarni (2015B5A70671P) 3. Ishaan Ahuja (2015B5A80442P)

Courses Teaching (Summer Term 2018)

Lab Oriented Project, Joy Mukherjee, 2015B5A70394P

Courses Teaching (Second Semester 2017-2018)

Name of the course	About the course	Students/Section
1.Pattern Recognition (BITS 446)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students ~ 77
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all MSc Physics students	Instructor
3.(a)Projects: SOP/COP/LOP	Special Project (PHY 491)	1. Shubham Gupta (2014B5A30752P) 2. Akshay Golechha (2014B5A40844P)

Courses Teaching (First Semester 2017-2018)

Name of the course	About the course	Students/Section
1.Computational Physics (PHY 313)	Compulsory Disciplinary Course or Physics Open to all 3ry B5 students	Total number o registered students ~ 50
2.Physics Lab (PHY 110)	Compulsory lab course to all irst degree students	Two sections
3.(a)Projects: SOP/COP/LOP (b)Projects: First Deg Thesis	1. Special Project 2. Lab oriented project 3. Special Project	1. Smriti Joshi (2014B5PS0947P) 2. Sachin Mishra (2014B5A70853P) 3. Aakanksha Agarwal (2014B5TS0951P) 1. Srajan Jain (2013B5A70810P)

Courses Teaching (Second Semester 2016-2017)

Name of the course	About the course	Students/Section
1.Pattern Recognition (BITS 446)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students ~ 65
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all MSc Physics students	Instructor-InCharge
3.(a)Projects: SOP/COP/LOP (b)Projects: First Deg Thesis		1. Pratyush Kar (2013A7TS029P) 2. Abhinav Mehta (2013A7TS183P) 3. Srajan Jain (2013B5A7810P) 1. Soma Mishra (2013B5TS960P) (As Co-Guide)

Courses Teaching (First Semester 2016-2017)

Name of the course	About the course	Students/Section
1.Image Processing (BITS 311)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students ~ 45
2.Physics Lab (PHY 110)	Compulsory lab course or all BE students	Two Sections
3.Projects: SOP/LOP/COP		1.Soma Mishra(ID:2013B5TS960P) 2. MohitBharadwaj(2012B5A3651P) 3. Sanjay Reddy S(ID:2013A7PS189P) 4. Manit Gupta(ID: 2013A7PS120P)

Courses Teaching (Second Semester 2015-2016)

Name of the course	About the course	Students/Section
1.Pattern Recognition (BITS 446)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students ~ 55
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all MSc Physics students
3.(a)Projects: Study Oriented Projs (b) Projects: First Deg Thesis		1.Raja VSKMT(ID:2011A7PS111) 2. Alekhya K(ID:2012A7PS095) 1. Himanshu Hansaria(ID:2011B5AB445)

Courses Teaching (First Semester 2015-2016)

Name of the course	About the course	Students/Section
1.Image Processing (BITS 311)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students ~ 61
2.Physics Lab (PHY 110)	Compulsory lab course or all BE students	One Section
3.(a)Projects: Study Oriented Projs (b) Projects: First Deg Thesis		1. Soma Mishra(ID:2013B5TS960P) 2.Sankhya Chakravarty(2012A7PS014) 3. Sanjay Reddy S (ID:2013A7PS189P) 4. Varun (ID: 2013A7PS166P) 5. Priyank Gupta (ID: 2013A7PS070P) 6. Saurabh Anand (ID 2013A7PS139P) (3-6 as co-guide) 1. Saumya Sahai(ID:2011B5A7581)

Courses Teaching (Second Semester 2014-2015)

Name of the course	About the course	Students/Section
1.Image Processing (BITS 311)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students ~ 210
2.Adv Phys Lab (PHY 344)	Compulsory lab course to all MSc Physics students
3.(a)Projects: Study Oriented Projs (b) Projects: First Deg Thesis		1. Himanshu Hansaria (ID:2011B5AB445) 2. Saurabh Maurya (2012A7PS055) 1. Adbhut Gupta(ID:2010B5A3672) 2. Tushar Rathi(ID:2010B5A3658)

Courses Teaching (first Semester 2014-2015)

Name of the course

About the course

Students/Section

1.Pattern Recognition (BITS 446)

·Elective course on emerging areas

·No pre-requisite

·Open to all eligible D/HD students

Total number of registered students = 80

Project: First Degree Thesis

Project: Lab Oriented Project

Project: Study Oriented Project

Project: Special Project

1. Adbhut Gupta (ID:2010B5A3672)

2. Ambuj Mehra (ID:2011B5A3616)

3. Pranav Gupta (ID:2012A7PS068)

4. P. Laxman (ID:2011C6PS603)

5. C. Bharath (ID:2011A7PS007)

Courses Teaching (Second Semester 2013-2014)

Name of the course	About the course	Students/Section
1.Image Processing (BITS 311, EA C443)	·Elective course on emerging areas ·No pre-requisite ·Open to all eligible D/HD students	Total number o registered students = 149
2.Adv Phys Lab (PHY 344), IMA (PHY C391)	Compulsory lab course to all MSc Physics students
3. (a) Projects: Study Oriented Projs (b) Projects: First Deg Thesis		1. Pooja Garg (ID:2011A7PS056P) 2. Anagh Pathak (ID:2009B5A1633P) 3. Viswadeep Sarangi (ID:2009B5A8678P)

Courses Teaching (First Semester 2013-2014)

Name of the course	About the course	Students/Section
1.Pattern Recognition (EA C471) (BITS 446)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students = 72
2.Ele. Mag & Optics Lab (PHY 214)	Compulsory lab course to all MSc Physics students in their 2nd year 1st semester	Section 2
3. (a) Projects: Lab Oriented Projs (BITS C313) (b) Projects: First Deg Thesis		1. Neha Gupta (ID:2010B5C7864P) 2.Aditya Joshi (ID:2010B5A3553) 3. N N Awadhut (ID: 2010B5A3629) 4. Tushar Rathi (ID:2010B5A3658) 5. Adbhut Gupta (ID:2010B5A3672) 6. Anagh Pathak (ID:2009B5A1633P) 7. Nitin Varyani (ID:2009B4A7586P)

Courses Teaching (Second Semester 2012-2013)

Name of the course	About the course	Students/Section
1.Intro to Nanoscience (EA C416)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students
2.Instrumental Methods o Analysis (PHY C391)	Compulsory lab course to all MSc Physics students in their 3rd year 2nd semester	Optics Lab
3.(a) Projects: Lab Oriented Projs (BITS C313) (b) Projects: First Deg Thesis (c) Projects: Higher Deg Thesis		1. S. Abhinav (ID:2010A3PS167) 2.Aditya Joshi (ID:2010B5A3553) 3. N N Awadhut (ID: 2010B5A3629) 4. Tushar Rathi (ID:2010B5A3658) 5. Adbhut Gupta (ID:2010B5A3672) 6. Dharnish K (ID:2008B5A8716) 7. Savini Sonavaria (ID:2011H124047)

Courses Teaching (First Semester 2012-2013)

Name of the course	About the course	Students/Section
1.Pattern Recognition (EA C471)	Elective course on emerging areas No pre-requisite Open to all eligible D/HD students	Total number o registered students = 82
2.Mechanics, oscillation & waves (PHY 111)	Course to all D students in their irst semester 1^st year	Tutorial section # 12
3.Projects or Higher Degree (Study in Advanced Topics, BITS G513)	Title of the project "Bird song recognition system"	Name of the student: Savini Sonavaria (2011H124047P)

Physics:

Physics I (Mechanics, Waves and Oscillation)
Physics II (Electrostatics and Electrodynamics)
Measurement Techniques
Instrumental Methods o Analysis
Optical Physics and Applications

Interdisciplinary:

Introduction to Nanoscience
Pattern Recognition
Image Processing

Research Interest

Earthquake Resistant Analysis & Design of concrete structures
Nonlinear Finite Element Analysis
Crack Modeling
Study of characteristics of basalt fibre
Fire Resistant Design
Ductile detailing
Resilience based design
Review of code provisions

Courses

Courses taught at BITS (on-campus):

GS F212: Environment, Development and Climate Change
GS F213: Development Theories
GS F333: Public Administration
GS F233: Public Policy

Additional courses taught at BITS Pilani

Reading Course on Human Rights
BITS F385: Introduction to Gender Studies

Courses taught at BITS (WILP):

SSTM ZG513: Sanitation Governance, Behaviour Change and Advocacy (for ME students)

Research Interests

Teaching and Research Interests

Development Studies; Rural Development; Public policy analysis and Governance; Community based natural resource management; Social actors, actor-networks and social change; Participatory community forest management (PCFM); Gender dynamics in PCFM; Gender Mainstreaming: Policy& Practice; Power, Knowledge, Participation and Performance; Local elites and development; Environmental politics and policy; NGOs and development; Poverty, citizenship and local governance; Qualitative Research Methodology; Ethnography; Mixed methods

TEACHING EXPERIENCE at Graduate, Post-Graduate level & PhD level (Prior to joining BITS Pilani)

Guest Lecturer: “Gender mainstreaming and gender budgeting in India”, in Programme on Gender Budgeting and Auditing coordinated by National Institute of Rural Development, NIRD, Hyderabad. (2013). Delivered lecture for practitioners and bureaucrats of various state governments of India.
Guest Lecturer: “Invited spaces and informal practices in CBNRM: Gender and situated agency in India”, (2013) IWE33806 (in MSc course offered by Irrigation and Water Management Chair Group, Wageningen University, The Netherlands).
Guest Lecturer: “Local Knowledge, Science and Expertise in Nature and Environment”, FNP32806 (2013) (in BSc, final year course offered by Forest and Nature Conservation Policy Chair Group, Wageningen University, The Netherlands).
Lecturer & Coordinator: Trends in Forest and Nature Conservation (September- October 2012), (MSc course offered by Forest and Nature Conservation Policy Chair Group, Wageningen University, The Netherlands); Coordinated overall course structure and administration; delivered lectures and Essay tutorial sessions; administered grades. (Anonymous evaluation of my lectures by MSc/MA participants: 4/5).
Guest Lecturer: “Gender and natural resource management” (2012) (in MSc course IWE33806 offered by Irrigation and Water Management Chair Group of Wageningen University, the Netherlands). Anonymous evaluation of my lecture by MSc students: 4.75/5).
FNP & FGV summer school in Rio de Janeiro (June 23-30, 2012), Brazil, Lecturer & Coordinator:Power, Knowledge and performance in participatory forest management. Developed full syllabus for the International PhD level summer school; coordinated overall course structure and administration; delivered lectures and methodology sessions; administered grades. (Anonymous evaluation of my lectures by summer school participants: 4.55/5).
FNP & WASS summer school in Wageningen University (July 11-15, 2011), The Netherlands, Lecturer & Coordinator: Participatory forest management as practice and performance. Developed full syllabus for the International PhD level summer school; coordinated overall course structure and administration; Raised funds and sponsorships, delivered lectures & methodology sessions; administered grades. (Anonymous evaluation of my lectures by summer school participants: 4.6/5).
Guest Lecturer: “Local Knowledge, Science and Expertise in Nature and Environment”, FNP32806, (2012) (in BSc course offered by Forest and Nature Conservation Policy Chair Group, Wageningen University, The Netherlands). Anonymous evaluation of my lecture by MSc students: 4/5)
Guest Lecturer: “Gender dynamics in community forest management”, (2011), (in MSc course IWE33806 offered by Irrigation and Water Management Chair Group of Wageningen University, the Netherlands). Anonymous evaluation of my lecture by MSc students: 4.6/5).
Guest Lecturer: “Participatory approaches in community based development interventions” (2009)(in MA course offered by the Department of Town and Regional Planning, University of Sheffield, United Kingdom).
Guest Lecturer & Assistant Coordinator: “ISS Training course for senior staff, Aden University, Yemen- for a Higher Studies Diploma in Women’s Studies and Development” Project: (WAU/MSM/ISS/NPT- Yemen/0317). In 2006, held at International Institute of Social Studies, The Netherlands).
Teaching Research Assistant: ‘Gender Policy and Planning’ (In 2006, in MSc course Women Gender and Development 4306 offered at the International Institute of Social Studies, The Netherlands).

Tuberculosis drug discovery
Main TB targets: Enzymes involved in DNA synthesis, cell wall synthesis, signaling pathway, dormancy, shikimate pathway, amino acid biosynthesis.

Host directed TB therapy

Other antimicrobial drug discovery

Antibacterial drugs: ESKAPE organisms majorly Staphylococcus aureus and Pseudomonas aeruginosa

Antibacterial drugs: ESKAPE organisms majorly Staphylococcus aureus and Pseudomonas aeruginosa

Collaborative Research Scientist at:

1. Karolinska Institute, Sweden.

2. N.I.I. New Delhi, India.

3. Institute of Science and Technology for Tuberculosis, Technopuc, Brazil

4. The Global Alliance for TB Drug Development Inc. NY.

5. Institute of Medical Biology, Lodz, Poland.

On Campus Courses

Computational learning theory
Foundations of Data Science
Foundations of Deep Learning (Special Topics)
Applied Statistical Methods

Reading Courses

Functional Analysis in Activation Functions (Sem II 2020)

Approximation Algorithms (Sem I 2021)

Graph Algorithms (Sem II 2021)
Optimization for Deep Learning (Semester I 2022)

Deep Learning In Protein Folding (Sem II 2022)

Reinforcement Learning for the Last Mile Delivery Problem (Sem II 2023)

WILP Courses

Machine Learning (Sem II 2020)

Machine Learning (Sem II 2021

Contribution to Curriculum Development

New Course-Computational Learning Theory(COLT)

Recorded 35 lectures on Machine Learning for WILP (Flipped Mode)

Redesigned WILP courses on Optimization, Computational intelligence

New Minor in Computational Economics

Some Lecture content are available here: https://scibasesnehanshu.wixsite.com/ieeecompsocblr/education

My YouTube Channel: https://www.youtube.com/playlist?list=PLMj0pXCZmlXhYD43yMvn54pFhbtWreUJb

Courses Taught (Previous Roles)

Computer Systems Performance Analysis

Discrete Mathematics

Advanced Algorithms

Randomized Algorithms

Stochastic Processes for Computing

Graph Theory

Logic in Computer Science

Scientific Computing

Probability Theory for Computer Science

Linear Algebra

Introduction to Data Analytics

Pattern Recognition

Courses in Semester (Sem -II 2022-2023)

MEF220 Heat Transfer (Lecture Tutorial); Instructor In charge

Courses in Semester (Sem -I 2022-2023)

ME F 217 Applied Thermodynamics (Lecture Tutorial- Practical)
BITS F415 Introduction to MEMS (Lecture Practical)

On Campus Courses Taught at BITS Pilani

Introduction to MEMS
Microfluidics and its Applications
Numerical Tech. For Fluid Flow & Heat Transfer
Heat Transfer
I C Engines
Advanced Heat Transfer
Computational Heat Transfer
Transport Phenomena II (Heat Transfer)
Applied Thermodynamics
Automotive Vehicles
Thermodynamics
Energy Management
Power Plant Engineering
Prime Movers and Fluid Machines
Fluid Mechanics

Off Campus Courses (For Industry Professionals) Taught at BITS Pilani

Computational Fluid Dynamics & Heat Transfer
Computational Fluid Dynamics
Prime Movers and Fluid Machines
Power Plant Engineering
Thermodynamics
Mechanical Technology

Teaching

II Semester 2022-2023(Current semester)

Sl. No.	Course	On Campus/ WILP	students registered	IC
1	ME F220 Heat Transfer	On campus	157	Y
2	DE ZG 631 Materials Technology and Testing	WILP	192	Y

I Semester 2022-2023

Sl. No.	Course	On Campus/ WILP	No. of Students registered	IC	Feedback
1	ME F420 Power Plant Engineering (Lecture)	On campus	13	Y	-
2	ME F420 Power Plant Engineering (Tutorial)	On campus	13	Y	-
3	DE ZG 631 Materials Technology and Testing	WILP	274	Y	4.34/5

II Semester 2021-2022

Sl. No.	Course	On Campus/ WILP	No. of Students registered	IC	Feedback
1	ME F220 Heat Transfer (Tutorial)	On campus	157	N	9.32/10
2	DE ZG 631 Materials Technology and Testing	WILP	232	Y	4.30/5

A: Details of Courses engaged for Five Years & feedback.

Teaching:

I Semester 2021-2022 (Current semester)

Serial Number	Course	On Campus/ WILP	No. Of Students	IC
1	MEF420 Power Plant Engineering (L)	On campus	20	Yes
2.	ME F420 Power Plant Engineering (T)	On campus	20	Yes
3.	DEZG 631 Materials Technology and Testing (L)	WILP	232	Yes

Academic Year 2020-2021

II Semester 2020-21

Serial Number	Course	OnCampus/ WILP	No. Of Students	IC	Students Feedback
1	ME F220 Heat Transfer (L)	On campus	156	Yes	8.8/10 (32)
2.	ME F220 Heat Transfer (P1)	On campus	42	Yes	9.01/12
3.	ME F420 Power Plant Engineering (L)	On campus	12	Yes	9.81/10 (3)

I Semester 2020-2021

Serial Number	Course	OnCampus/ WILP	No. Of Students	IC	Students Feed back
1	MEF311 Heat Transfer (L)	On campus	146	Yes	8.69/10 (32)
2.	ME F311 Heat Transfer (P5)	On campus	146	Yes	-------
3.	ENGG ZC243 Mechanical Technology (L)	WILP	241	Yes	4.35/5 (216)

Academic Year 2019-2020

II Semester 2019-2020

Serial Number	Course	OnCampus/ WILP	No. Of Students	IC	Students Feedback
1	MEF420 Power Plant Engineering (L)	On campus	23	Yes	NA
2.	ENGG ZC 232 Engineering Materials (L)	WILP	272	Yes	4.43/5 (239)
3.	BITS G639 Practice School-II (NBC Bearings and CEG, Jaipur)	On campus	06	No	NA

I Semester 2019-2020

Serial Number	Course	OnCampus/ WILP	No. Of Students	IC	Students Feed back
1	MEF311 Heat Transfer (L)	On campus	138	Yes	9.04/10 (50)
2.	ME F311 Heat Transfer (P2,P5)	On campus	75	Yes	8.52/10 (27)
3.	ETZC353 Energy Management	WILP	148	Yes	4.23/5 (148)

Academic Year 2018-2019

II Semester 2018-2019

Serial Number	Course	OnCampus/ WILP	No. Of Students	IC	Students Feedback
1	MEF420 Power Plant Engineering (L)	On campus	49	Yes	9.48/10 (36)
2.	ME F420 Power Plant Engineering (T)	On campus	49	Yes	9.50/10 (34)
3.	ENG ZC 232Engineering Materials (L)	WILP	265	Yes	4.20/5 (191)
4.	BITS G639 Practice School-II (NBC Bearings and CEG, Jaipur)	On campus	06	No	NA

I Semester 2018-2019

Serial Number	Course	OnCampus/ WILP	No. Of Students	IC	Students Feedback
1	MEF311 Heat Transfer (L)	On campus	133	Yes	9.21/10 (51)
2.	ME F311 Heat Transfer (P3)	On campus	28	Yes	8.56/10(26)
3.	ME F311 Heat Transfer (P4)	On Campus	34	Yes	8.83/10(30)
4.	MEF 212 Materials science and Engg.	On Campus	145	No	8.33/10 (60)

Academic year 2017-2018

II Semester 2017-2018

Serial Number	Course	On Campus/ WILP	No. Of Students	IC	Students Feedback
1	MEF420 Power Plant Engineering (L)	On campus	38	Yes	9.06(14)
2.	MEF420 Power Plant Engineering (T)	On campus	38	Yes	8.59(27)
3	BITS G639 Practice School-II (NBC Bearings and CEG, Jaipur)	On campus	06	No	NA

I Semester 2017-2018

Serial Number

Course

On Campus/ WILP

No. Of Students

Students

Feedback

MEF311 Heat Transfer (L)

On campus

128

Yes

9.21/10(70)

ME F311 Heat Transfer (P2,P4)

On campus

Yes

8.8/10 (38)

Academic year 2016-17

II Semester 2016-2017

Serial Number	Course	On Campus/ WILP	No. Of Students	IC	Students Feedback
1	MEF420 Power Plant Engineering (L)	On campus	50	Yes	9.01/10 (16)
2.	ME F420 Power Plant Engineering (T)	On campus	50	Yes	NA
3.	ENGGZC 232 Engineering Materials (L)	WILP	41	Yes	4.42/5(23)
4.	BITS G639 Practice School-II (NBC Bearings and CEG, Jaipur)	On campus	06	No	NA

I Semester 2016-2017

Serial Number	Course	On Campus/ WILP	No. Of Students	IC	Students feed back
1	MEF311 Heat Transfer (L)	On campus	138	Yes	9.05/10(65)
2.	ME F311 Heat Transfer (P2,P5)	On campus	75	Yes	8.75/10 (38)
3.	ENGG ZC 232 Engineering Materials (L)	WILP	280	Yes	4.28/5 (222)

Academic year 2015-2016

II Semester 2015-2016

Serial Number	Course	On Campus/ WILP	No. Of Students	IC	Students Feedback
1	MEF420 Power Plant Engineering (L)	On campus	38	Yes	9.35/10 (24)
2.	ME F420 Power Plant Engineering (T)	On campus	38	Yes	9.17/10 (21)
3.	ENGG ZC 232 Engineering Materials (L)	WILP	179	Yes	4.36/5 (140)
4.	BITS G639 Practice School-II (NBC Bearings and CEG, Jaipur)	On campus	06	No	NA

Other Courses Handled in the earlier semesters:

Metal Forming and machining. ( One time)
Casting and welding (Two time)
Mechanical Technology ( Three times)
Energy Management (One time)
Materials Technology and Testing (One Time)
Advanced Heat Transfer (One time)
Thermodynamics (Two times).

Teaching Learning Centre:

Attended TLC workshop at BITS-Pilani Goa campus in July 2015 and conducted orientation session for the newly inducted faculty members.
Delivered special session on “Experience sharing on best practices of Teaching”.
Panellist in the in the international conference on Teaching and Learning held at Goa campus during February 2020.

Development of Digital content

Developed Video digital content for ENGG ZC 232 Engineering Materials offered under flipped mode for WILP.
Instrumental in developing videos for Practical offered in ME F311 Heat Transfer lab.

Courses

Courses in Current Semester (Sem-Il, 2012-2013)	Class Hrs
Machine Design & Drawing Machine Design & Drawing - Budynas, R. G. and Nisbett, K. J., “Shigley's Mechanical Engineering Design" Tata–McGraw Hill, 9th Edition, New Delhi, 2011 Machine Design & Drawing Practical - Cencil Jensen, Jay D. Helsel & Dennis R.Short, Engineering Drawing & Design, Tata McGraw-Hill 7th Ed. 2012.	T, Th, S 10AM to 10.50PM

List of On-Campus courses taught at BITS Pilani	No. of Semesters Taught
Mechanical System Design [ME G521]	5
Design Projects [DE G522]	4
Advanced Mechanics of Solids and Kinematics [ME C392]	7
Computer Aided Design (Selected topics only)	2
Design of Machine Elements [ME C312]	4
Dynamics of Machines and Vibration [ME C422]	1
Engineering Graphics [TA C111]	9
Mechanics of Solids [ES C221]	7
Production Techniques [ME C 342]	1
Thermodynamics [ES C 112]	8
Transport Phenomena –I [ ME C221]	4
Workshop Practice TA C112]	5

Teaching

II SEM 2023-24

Solid State Physics (PHY F341)

Previous Semesters

LECTURES

Structure and Properties of Materials (ES C242)
General Physics (PHY C122)
Statistical Mechanics (PHY C312) & (PHY F312)
Biophysics (BIO C331) & (BIO F215)
Computational Physics (PHY C232) & (PHY F313)
Physics of Semiconducor Devices (PHY F426)
Mathematics (MATH F211) - III (Differential Equations)
Soft Condensed Matter Physics (PHY F416)
Solid State Physics (PHY F341)

TUTORIAL

Physics II (Electrodynamics) (PHY C132)
Thermodynamics (BITS F111)

LABORATORY

Measurement Technique 1 (TA C211) & Physics Lab 1 (PHY F110)
Modern Physics Lab (PHY F212)

OFF CAMPUS

Engineering Mathematics I (MATH ZC232)
Engineering Mathematics II
Thermodynamics (POW JS ZC 231)
Engineering Materials ( PECF ZC232)

Manuals for Physics Lab (PHY F110)

Step by Step Manuals

Electromagnetic Induction

Planck's Constant

Youngs's Modulus

Newton's Ring

The single and double slit

Diffraction Grating

Lab Manual

Manual_phyf110.pdf

Slides for Error_Analysis

Courses Taught

Machine Learning
Data Mining (Jointly introduced this course in January 2004)
Data Warehousing (Introduced this course in January 2002)
Database Design and Applications
Fourth Generation Languages and Applications
Database Systems
Computer Networks
Operating Systems
Computer Programming using C & UNIX Operating System
Introduction to Bioinformatics
Discrete Structures for Computer Science
Logic for Computer Science (Introduced this course in August 2010)

In addition to the above, also taught a course on Database Systems at WIPRO, Hyderabad, INDIA.

New Course Planned: Database Implementation (this course will be offered in collaboration with Prof. Shashi K Gadia, Dept. of Comp. Sc., Iowa State University,US)

Teaching Experience

Senior Professor, Department of Biological Sciences, BITS Pilani, Mar 2023- cont..
Professor, Biological Sciences Group, BITS Pilani, Aug 2010- Feb 2023
Associate Professor, Biological Sciences Group, BITS Pilani, Jan 2005- July 2010
Assistant Professor, Biological Sciences Group, BITS Pilani, Jan 2000- Dec 2004
Lecturer, Biological Sciences Group, BITS Pilani Nov 1993- Dec 1999

Short Duration Programmes Developed and Delivered

Two workshops on Finance for Non-finance for the benefit of senior, management personnel of Hindalco Industries Limited, a flagship company of the Aditya Birla Group were conducted at Renukoot between 23rd December and 26th December, 2008 by Prof. Arya Kumar, chief Entrepreneurship Development & IPR Unit, Prof. Niranjan Swain, Asstt. Dean Practice School Division and Mr. Arun Kumar Vaish of Economics and Finance Group. 26 and 23 participants took the benefit of workshops. Workshops were well received and participants admired the content, methodology and delivery.
“Two workshops on Finance for Non-finance for the benefit of senior, management personnel of Hindalco Industries Limited, a flagship company of the Aditya Birla Group were conducted at Renukoot and Renusagar respectively in the month of December 2007
Programme for Educational Institutions Heads on Personal Growth and Professional Effectiveness organized between 20th and 21st August 2005.
Programmes on Managerial Excellence & Effective Branch Management for Senior Management Personnel of Bank of Rajasthan between 7 – 15th Feb 2005.
Programme on Managerial Excellence & Effective Branch Management for senior management Personnel of Bank of Rajasthan 1-3rd May 2009.
Designed management, finance and economics input and delivered for around 7-8 programmes on “Professional skills Development” for the junior executive Trainees of Hindustan Zinc Ltd. During 2005 -2009.
Workshop on Intellectual Property Rights (IPR) Management was organized on 25th April 2010. The workshop was sponsored by Ministry of Micro, Small and Medium Enterprises and University Grant Commission, Government of India. 70 participants took advantage of the workshop.
Workshop on “Issues in Patenting - was organized on 9th September 2010 by Dr Mohan Dewan, Patents and Trade Marks Attorney of Dewan & Co. Around 55 faculty members took advantage of it.
Organized a one day workshop on Intellectual Property Management on 17th September 2011 at K K Birla Goa campus, BITS, Pilani. 40 participants from different organizations participated in the workshop. Workshop was sponsored by Ministry of Micro, Small and Medium Enterprises, Govt. of India.
Organised 2 Days workshop on IPR for the benefit of MSME units and faculty members between 2-3rd February 2012 at Bhiwadi (Rajasthan) by mobilizing funds from MSME, Govt. of India.
Conducted a workshop on behalf of Pearson for the benefit of around 200 MBA students and 25 faculty members from different colleges to inculcate the spirit of entrepreneurship amongst students and how to make entrepreneurship learning an enjoyable experience for the benefit of faculty members in Siva Sivani Institute of Management on 19th October 2012. Workshop mainly focused on need and importance of entrepreneurship for the Indian economy to become one of the leading economies in the world in the 21st century.

Courses handled

Screening Methods & Technique in Pharmacology
Medicinal Chemistry
Advanced Pharmacology
Instrumental Methods of Analysis
Chemistry of Synthetic Drugs
Applied Pharmaceutical Chemistry
Molecular Biology and Immunology
Fermentation & Biotechnology
Computer Aided Drug Design
Advanced Medicinal Chemistry
Disinfection and Sterilization
Bioethics & Biosafety

Projects Supervised

Ph. D:

Completed: 12 (5 in Medicinal Chemistry; 6 in Pharmacology; 1 in Veterinary Pharmacology)

DAC member for several Ph.D. candidates

Higher Degree:

Guided several M. Pharm. students for various projects in the area of New Drug Design and Synthesis, Neuro-psychopharmacology, Design and development of new animal models, with special reference to serotonergic modulators and related disorders. Many have culminated in conference presentations and or publications.

First Degree:

Guided two (completed) first degree thesis students and currently guiding one first degree student in the area of Neuro-psychopharmacology, Design and Development of new Animal Models and related protocol standardization. Guided several B.Pharm. Students on Special Projects, Lab. Oriented Projects, Study Oriented Projects, Computer Projects. A few have culminated in conference presentations and or publications.

Courses Taught

Higher Degree or P.G. Level

Waste Management Systems
Matrix Methods in Civil Engineering
Advanced Computational Techniques
Computer Aided Analysis and Design
Pavement Design Maintenance and Management
Pavement Analysis and Design.
Water Resources Planning and Management
Multicriteria Analysis in Engineering
Sanitation Technology
Sanitation Finance and Project Management

First Degree or Undergraduate Level

MCDM in Engineering and Management
Engineering Optimization
Fluid Mechanics
Introduction to Environmental Engineering
Water and Waste Water Treatment
Hydraulics and Fluid Mechanics
Introduction to Water Resources Engineering
Design of Water Resources Systems
Transportation Engineering
Primemovers & Fluid Machines
Financing Infrastructure Projects
Mechanics of Solids (Strength of Materials)
Transport Phenomena I
Civil Engineering Practice

Courses Taught /Developed

Entrepreneurship
Creating & Leading an Entrepreneurial Organisation
Business & Society
Securities & Portfolio Management
Financial Management
Marketing Research
Corporate Planning/ Strategic Management
Indian Wisdom for Modern Management
Corporate Finance and Taxation
Global Business Technology & Knowledge Sharing
Study in Advanced Topics - Advanced Financial Management, Advanced Project in Strategic Mangt. (MPhil students)
New Venture Creation
Principles of Management
Principles of Economics
R &D Management
Investment Analysis and Portfolio Management.

Current Teaching Assignment

First Semester 2022-23

CS/SS G514 Object Oriented Analysis and Design

Instructor Incharge : Yashvardhan Sharma

M, W, F 3rd Hr @ 6103

Chamber Consultation Hours: Thursday 5:00pm to 6pm @6111-C

SS ZG514 Object Oriented Analysis and Design

Instructor Incharge : Yashvardhan Sharma

Saturday 10:30am - 12:30pm

Online Lecture

Second Semester 2022-23

CS F415 Data Mining

Instructor : Yashvardhan Sharma

M, W, F 2nd Hr @ 6104

Chamber Consultation Hours: Thursday 5:00pm to 6pm @6111-C

SS ZG514 Data Warehousing

Instructor : Yashvardhan Sharma

Saturday 5:50pm to 7:20pm

Online Lecture

(After July 2018)
Academic Year Semester Course

2018 - 19 Semester 1
I .CS F415 D ATA M INING I/C (95 S TUDENTS ) II . IS ZC332 DATABASE SYST AND APPL I/C (1508 S TUDENTS )

2018 - 19 Semester 2
I .CS F415 D ATA M INING I/C (52 S TUDENTS ) ii.SS G515 DATA WAREHOUSING - I/C (33 Students)

2019 - 20 Semester 1
i.CS F213 OBJECT ORIENTED PROG (240 Students) II .SS G514 O BJECT O RIENTED A NALYSIS AND D ESIGN I/C(56 S TUDENTS )

2019 - 20 Semester 2
I .CS F212 D ATABASE S YSTEMS I/C (246 S TUDENTS ) I .CS F415 D ATA M INING I/C (69 S TUDENTS )

2020 - 21 Semester 1
II .SS G514 O BJECT O RIENTED A NALYSIS AND D ESIGN I/C( 67 S TUDENTS ) - T WO O FFERINGS (11+56) II .SS ZG514 O BJECT O RIENTED A NALYSIS AND D ESIGN I/C(1 8 9 S TUDENTS )

20 20 - 2 1 Semester 2
I . SS Z G515 DATA WAREHOUSING - I/C ( 118 Students) - I .CS F415 D ATA M INING I/C ( 23 S TUDENTS )

202 1 - 2 2 Semester 1
II .SS G514 O BJECT O RIENTED A NALYSIS AND D ESIGN I/C( 3 7 S TUDENTS ) II . BITS F425 D EEP L EARNING I NSTRUCTOR ( 7 9 S TUDENTS )

20 21 - 2 2 Semester 2
I .CS F212 D ATABASE S YSTEMS I (2 59 S TUDENTS ) I .CS F415 D ATA M INING I/C ( 12 S TUDENTS )

Teaching Courses with full enthusiasm
i. Taking all classes regularly.
ii. Test Paper Correction and Dis tribution within a week .
iii. Grade Submission always before deadline.
iv. Never missed any invigilation duty.

On-campus Teaching

Financial Management

Fundamentals of Finance and Accounts

Security Analysis and Portfolio Management

Business Analysis and Valuation

Derivatives and Risk Management

Corporate Finance and Taxation

Theory of Finance

Principles of Economics

Principles of Management

Financial Risk Analytics and Management

Teaching

Spring 2024 (Jan-May)
- Network Security [CS G513]
- Quantum Architecture and Programming [CS F316]
Fall 2023 (Aug-Dec)
- Cyber Security [SEZG681/SSZG681]
- Internet of Things [CS G518]
Spring 2023 (Jan-May)
- Computer Programming [CS F111]
- Block Chain Technologies and Systems [SEZG569/SSZG569]
Fall 2022 (Aug-Dec)
- CRYPTOGRAPHY [BITS F463]
- Internet of Things [CS G518]
Spring 2022 (Jan-May)
- Block Chain Technologies and Systems [SEZG569/SSZG569]
- Internet of Things [CS G518]
- Computer Programming [CS F111]
Fall 2021 (Aug-Dec)
- CRYPTOGRAPHY [BITS F463]
- Internet of Things [CS G518]
Spring 2021 (Jan-May)
- Blockchain Technology [BITS F452]
- Internet of Things (CS G518)
Fall 2020 (Aug-Dec)
- Discrete Structure for Computer Science [CS F222]
- CRYPTOGRAPHY [BITS F463]
Spring 2020 (Jan-May)
- Network Security [CS G513]
- Computer Networks [CS F303]
Fall 2019 (Aug-Dec)
- Discrete Structure for Computer Science [CS F222]
- CRYPTOGRAPHY [BITS F463]
Spring 2019 (Jan-May)
- Network Security [CS G513]
- Computer Networks [CS F303]
Fall 2018 (Aug-Dec)
- Discrete Structure for Computer Science [CS F222]
- Computer Programming [CS F111]
Spring 2018 (Jan-May)
- Network Security [CS G513]
- Computer Networks [CS F303]
Fall 2017 (Aug-Dec)
- Discrete Structure for Computer Science, (Tutorials) [CS F222]
- CRYPTOGRAPHY [BITS F463]
Spring 2017 (Jan-May)
- Network Security [SS G513]
- Data Structure and Algorithms (Practical) [CS F211]
Fall 2016 (Aug-Dec)
- CRYPTOGRAPHY [BITS F463]
- Discrete Structure for Computer Science, (Tutorials) [CS F222]

Old Courses

DSTN (CSC446/ ISC446)
Operating Systems (CSC372 & ISC362)
Compuer Networks
Microprocessor
Database Systems & Applications
Structures of Programming Languages
Fourth Generation Languages
Adv Architecture and Performance evaluation
Fault Tolerance System Design

Current Courses

OS (CS C372 & ISC362)
AAPE (CS G562)

Courses

Present semester

Electrical Sciences (BE, Instructor in-charge)
Signals and Systems (BE, Tutorial instructor)
Analog Electronics (BE, Tutorial instructor)

Previous semesters

Electrical Sciences (BE, Co-IC/Tutorial)
Electromagnetic Theory (BE, IC/Tutorial)
Electromagnetic Fields and Waves (BE, IC)
Engineering Measurements (WILP, IC)
Electromagnetic Compatibility (BE, IC)
Communication Systems (BE, Tutorial)
Telecommunication Switching Systems and Networks (BE, IC)
Signals and Systems (BE, Tutorial)
Analog Electronics (BE, Tutorial)
RF and Microwave Engineering (ME, IC)
Antenna Theory and Design (BE/ME, IC/Co-IC)
Advanced Satellite Communication (ME, IC)

Courses Taught at BITS Pilani, Hyderabad Campus

Micro-Electro-Mechanical Systems (Bachelors / Masters, Discipline / Open elective)
Introduction to MEMS (under Work-Integrated Learning Programme)
Microfluidics and its Applications (Regular, Discipline / Open elective)
Electronic Instruments & Instrumentation Technology (Bachelors Core)
IC Fabrication Technology (Masters Core / Elective)
Analog Electronics (Bachelors Core)
Transducers and Measurement Techniques (Bachelors Core)
Electrical Sciences (Bachelors Core)
Electronic Devices (Bachelors Core)
Microprocessors & Interfacing (Bachelors Core)
Digital Design (Bachelors Core)

Courses taught at UPES, Dehradun (2011-2015)

Electronics Devices
Micro Electro Mechanical Systems (MEMS)
Nano Electronics Engineering
Nano Composites
Advanced applications of Nanotechnology in Energy Domain
Nano Electronics and Robotics

Courses taught at University of Alberta, Canada (2001-2005)

Introduction to Optical Communication
Microwave Engineering

Teaching/Taught

Mathematics-I (Advanced Calculus)
Mathematics-II (Linear Algebra & Complex Analysis)
Mathematics-III (Differential Equations )
Measure & Integration
Numerical Analysis
Operations Research
Probability & Statistics
Elementary Real Analysis
Statistical Inference & Applications
Applied Statistical Methods
Calculus (For WILP Students)
Statistical Methods (For WILP Students)

Material Science

Introduction, structure of materials (metals, ceramics and polymers), crystalline structure imperfections, amorphous and semi-crystalline materials, correlation of structure to properties, phase diagrams & phase transformation, solidification, diffusion and heat treatment, mechanical behavior of materials. Non-destructive testing, composites, corrosion, advanced-smart materials, criteria for material selection, economic environmental and societal issues.

Introduction to MEMS

Micro electro mechanical systems (MEMS), devices and technologies. Micro-machining and microfabrication techniques. Transduction mechanisms and modeling in different energy domains. Analysis of micromachined capacitive, piezoresistive and thermal sensors/actuators and applications. Computer- aided design for MEMS layout, fabrication and analysis.

Courses taught

2022-2023

General Chemistry Tutorial CHEM F111 LEC(FD): Ist semester
Chemistry Laboratory CHEM F110 LAB(FD): Ist semester
Instrumental Methods of Analysis CHEM F313 LAB (FD): Ist semester
Instrumental Methods of Analysis CHEM F313 LEC (FD): Ist semester
Chemistry Laboratory CHEM F110 LAB (FD): IInd semester
Chemical Experimentation CHEM F341 LAB (FD): IInd semester
Bioinorganic Chemistry CHEM G559 LEC (HD): IInd semester
Practice School-I (PS-I) BITS F221 and BITS F231: 30.05.2023 to 21.07.2023

2023-2024

General Chemistry Tutorial CHEM F111 LEC(FD): Ist semester
Chemistry Laboratory CHEM F110 LAB(FD): Ist semester
Instrumental Methods of Analysis CHEM F313 LAB (FD): Ist semester
Instrumental Methods of Analysis CHEM F313 LEC (FD): Ist semester
Reading Course BITS F382 LEC (FD): Ist semester
Physical Methods in Chemistry CHEM G554 LEC (HD): Ist semester
Chemistry Laboratory CHEM F110 LAB(FD): IInd semester
Reading Course BITS F382 LEC (FD): IInd semester
Chemical Experimentation CHEM F341 LAB (FD): IInd semester
Bioinorganic Chemistry CHEM G559 LEC (HD): IInd semester
Inorganic Chemistry-II CHEM F241 LEC (FD): IInd semester

Courses

Spring 2023

Internetworking Technologies (Lecture)
Computer Programming (Lab)

Fall 2022

Computer Architecture (Lecture)

Spring 2022

Computer Programming (Lecture)
Computer Networks (Tutorial + Lab)

Fall 2021

Advanced Computer Networks (Lecture)
Computer Architecture (Tutorial + Lab)

Summer Term 2021

Operating Systems

Spring 2021

Computer Programming (Lecture)
Computer Networks (Tutorial + Lab)

Fall 2020

Computer Programming (Laboratory)
Computer Architecture (Tutorial + Lab)

Courses

2022-23 (First)

Foundations of Data Structures and Algorithms (F232) (P) (Students' Feedback: 9.16/10)
Computer Programming (CS F111) (P) (Students' Feedback: 9.07/10)

2022-23 (Second)

Computer Programming (CS F111) (L-P) (Instructor in Charge) (Students' Feedback: L: 8.79/10; P: 9.11/10)

2023-24 (First)

Data Structures and Algorithms Design (SS ZG519/SE ZG519: WILP) (Instructor in Charge) (Students' Feedback: 4.41/5)
Computer Programming (CS F111) (P) (Students' Feedback: P: 8.31/10)

2023-24 (Second)

Data Structures and Algorithms Design (SS ZG519/SE ZG519: WILP) (Instructor in Charge) (Students' Feedback: 3.67/5)
Computer Programming (CS F111) (P)

2022-23

2021-2024

BITS F327 AI for Robotics

BITS F431 Flexible Manufacturing System

BITS F110 Engineering Graphics

ME F320 Engineering Optimization

ME F221 Mechanisms and Machines

BITS F441 Robotics

ME G511 Mechanisms and Robotics

Courses Offered

Current Courses

First Semester 2024-2025 ( August 2024 - December 2024)

First Degree (Undergraduate)

CE F323 Introduction to Environmental Engineering

BITS F225 Environmental Studies

Previous Courses

Higher degree (Graduate / Post Graduate)

SAN G511 Sanitation Technology
BITS E661 Research Methodology
SSTM ZG511 Sanitation Technology (WILP*)
SSTM ZG525 Environmental Systems Modelling (WILP*)
SSTM ZG528 Environmental Impact and Risk Assessment (WILP*)
TEWPG ZG521 Environmental Impact Assessment (WILP*)

*Work Integrated Learning Program

First Degree (Undergraduate)

BITS F225 Environmental Studies
CE F231 Fluid Mechanics
CE C322 / CE F242 Construction Planning and Technology
CE F321                          Engineering Hydrology
CE F341 Hydrology and Water Resources Engineering
CE C342 / F342 Water and Wastewater Treatment
CE F212 Transport Phenomena
CE F214 Construction Materials
CE C371 Hydraulics and Fluid Mechanics
CE C394 / CE F423 Green Buildings and Energy Conservation
CE C414 / CE F323 Introduction to Environmental Engineering
CE C418    Introduction to Water Resources Engineering
TA C111 / BITS F110 Engineering Graphics
TA C222      Measurement Techniques II Laboratory
CE C371 Hydraulics and Fluid Mechanics Laboratory
CE C342 / F342 Water and Wastewater Treatment Laboratory

At Thapar University, Patiala and PSNACET, Dindigul, TN
Hydrology and Ground Water, Geotechnical Engineering, Architecture and Town planning,
Transportation Engineering II, Introduction to Civil Engineering

Courses Taught

HSS F 322 : Social and Political Ecology

Objective of the Course: Social and Political ecology examines the politics of the environment and the social responses to the politics. The course would provide students awareness of contemporary debates on the issue of environment through case studies, movements and policies. This would enable students to have a broader understanding of issues related to policies and governance of natural resources.

GS F212: Environment, Development and Climate Change

Scope and Objective of the Course: This course focuses on the concepts of environment, development, and climate change in the contemporary world. This course focuses on the nature and causes of environmental problems in developing countries. Attention is given to both the causes and solutions of environmental problems and the role of state and non-state actors interacting at local, national and global scales. The objective of the course is to make the students aware of the debates and issues relating to environment, development and climate change. The goal of this course is for the learners to appreciate the people-environment relations and to understand the anthropocentric dynamics of development and climate change.

GS F333: Public Administration

Scopes and Objective of the Course: Public administration is a government’s functional arm that enables it to discharge growing responsibilities within an organized framework of well-established procedures. The quality of public administration determines the efficiency with which a government is able to reach out to fulfill the needs of its people and carry forward its objectives into practice. Think about how public administration plays an important role in your life as an Indian citizen? Public administration represents a great creative force, which if used in the right way at the right time, can transform and enhance the social, cultural and economic life of a nation……..

HSS F362: Local Governance and Participation

Scope and Objective of the Course: Strengthening local governments is one of the most important governance challenges in India today. A strong and empowered local government can bring together inclusive growth with inclusive governance. The course will introduce students to key concepts and ideas of decentralization with a focus on the constitutional framework for the same in the Indian context. This will include understanding the 73rd and 74th Constitutional amendments; the Panchayat Extension to Scheduled Areas (PESA); the idea and impact of reservations for women, scheduled castes, scheduled tribes and other marginalized communities. State wise and sectoral case studies will be used to further engage and explain the idea of local governance and participation.

GS F211: Modern Political Concepts

Scope and Objective of the Course: Students will gain a working understanding of the concepts of State, Rights, Democracy, Modern political ideologies, Contemporary political issues. The main purpose of this course is to acquaint students with the language of politics. Here, language is understood as the vocabulary and rhetoric of politics. As languages change over time, it is pertinent to understand the historical context(s) from within which the language(s) of politics emerged as well as those in which these continue to evolve.

HSS F249: Politics in India

Scope and Objective of the Course: India is a diverse country and has sustained a thriving democracy for decades. In its functioning, the Indian democracy deals with various complex issues juxtaposed against each other. The country is defined by great cultural diversity on the one hand and, on the other, the presence of deep social and economic inequality. Some state institutions that deal with these complexities have flourished and strengthened our democracy, while others have not. There is a constant negotiation of political space, ideologies, and identities by the state, political parties, and civil society. A constant challenge faced by the Indian democracy is its capacity to redistribute wealth and alleviate poverty. This Politics in India course will address these issues and help students understand the complexity that defines Indian politics.

UGC Massive online course
I have developed all content for three modules on forest commons, the concept of sustainability and sustainable development for the MA course on Environmental Sociology. The lectures for these modules can be found at the following links:
• Sustainable development: https://www.youtube.com/playlist?list=PL_APJLEgpiIc2Aj8nnB5WMmSE9KPDLkAy
• Forest commons: https://www.youtube.com/playlist?list=PL_APJLEgpiIdBxrTQyuwAwW19hLGHWWz3
• Concept of sustainability:https://www.youtube.com/playlist?list=PL_APJLEgpiIei5b1wFn-PnJEtdq5oGGb

Teaching and work

WILP Courses:

Environmental Biotechnology

Solid Waste Management

Other courses:

CEL I Laboratory

CEL II Laboratory

Teaching

Summary and Frequently Taught Courses

Separation Processes-II
Transport Phenomena
Membrane Science and Technology
Mathematical Methods in Chemical Engineering

BITS Pilani, Pilani Campus

2024-25 Semester I (ongoing)

Mathematical Methods in Chemical Engineering (CHE G523), Lecture*
Kinetics & Reactor Design (CHE F311), Tutorial
Thermodynamics (BITS F111), Tutorial

2023-24 Semester II

Transport Phenomena (CHE F414), Lecture*
Materials Characterization Techniques (MST G521), Practical
Heat Transfer (CHE F241), Tutorial

2023-24 Semester I

Mathematical Methods in Chemical Engineering (CHE G523), Lecture*
Chemical Engineering Laboratory-II, Practical#

2022-23 Semester II

Membrane Science & Engineering (CHE F423), Lecture*
Transport Phenomena (CHE F414), Lecture*

2022-23 Semester I

Mathematical Methods in Chemical Engineering (CHE G523), Lecture*
Transport Phenomena (CHE F414), Lecture*

2021-22 Semester II

Transport Phenomena (CHE F414), Lecture*
Environmental Studies (BITS F225), Lecture#

2021-22 Semester I

Separation Process II (CHE F313), Lecture*
Separation Process II (CHE F313), Tutorial
Environmental Studies (BITS F225), Lecture#

2020-21 Semester II

Transport Phenomena (CHE F414), Lecture*
Chemical Engineering Laboratory-II, Practical*
Membrane Science & Engineering (CHE F423), Lecture*

2020-21 Semester I

Separation Process II (CHE F313), Lecture*
Separation Process II (CHE F313), Tutorial
Membrane Science & Engineering (CHE F423), Lecture*

2019-20 Semester II

Transport Phenomena (CHE F414), Lecture*
Chemical Engineering Laboratory-II, Practical#

2019-20 Semester I

Separation Process II (CHE F313), Lecture#
WILP: Process Equipment Design (PEZC412), Lecture*
Chemical Process Calculations (CHE F211), Tutorial

2018-19 Semester II

Separation Process II (CHE F313), Lecture#
Process Equipment Design (CHE F412), Lecture*
WILP: Process Equipment Design (PEZC412), Lecture*

2018-19 Semester I

Separation Process II (CHE F313), Lecture#
Chemical Process Calculations (CHE F211), Tutorial
Thermodynamics (BITS F111), Tutorials

2017-18 Semester II

Process Equipment Design (CHE F412), Lecture*
Heat Transfer (CHE F241), Tutorial
Thermodynamics (BITS F111), Tutorials

2017-18 Semester I

Plant Process Safety (CHE F413), Lecture*
Chemical Engineering Laboratory-I (CHE F312), Practical#
Chemical Process Calculations (CHE F211), Tutorial

Teaching Assistant, Texas A&M University, College Station

Fall 2010

Chemical Engineering Kinetics (CHEN 464) UG course

Spring 2010

Chemical Engineering Kinetics and Reactor Design (CHEN 624) Grad course

Teaching Assistant, University of Connecticut, Storrs

Spring 2009

Foundations of Engineering (ENGR 1166) UG course

Fall 2008

Introduction to Biochemical Engineering (CHEG 3173) UG course

* Instructor-In-Charge or Sole Instructor
#Shared

Prof. Suman Kundu – Invited Talks

2023: Invited Talk. Title: “A peptide that disrupts hADA3-E6 interaction: implications in HPV induced cancer therapy”, at the 9th Indian Peptide Symposium and Indian Peptide Show, jointly organized by the Indian Peptide Society and BITS Pilani, K.K. Birla Goa Campus, at Goa, India, 23rd – 25th February, 2023 (talk on 23rd February, 2023).
2023: Invited Lead Talk. Title: “Rooted in plants enroute a therapy for sickle cell disease”, at the International Conference on Exploring New Horizons in Biotechnology and Mini-symposium on Recent Advances in Biotechnological Innovations, jointly organized by School of Biotechnology, Institute of Science and Institute of Eminence, Banaras Hindu University, Varanasi, Uttar Pradesh, India, 10th – 12th February, 2023 (talk on 11th February, 2023).
2022: Invited Lead Talk. Title: “A Novel Ayurvedic Formulation as a Therapy for Sickle Cell Disease with Positive Outcome in Clinical Trial (HbS-Sailin)”, at the 9th World Ayurveda Congress and Arogya Expo (focal theme: Ayurveda for One Health), jointly organized by World Ayurveda Foundation, Ministry of Ayush, Government of India and Government of Goa, Kala Academy, Panjim, Goa, India, 8th – 11th December, 2022 (talk on 8th December, 2022 in the session Ayurveda, the Success Stories).
2022: Invited Talk. Title: “Green Solution for Red Alarm: Phytoceutical Formulation for Sickle Cell Disease (HbS-Sailin)”, at the International Conference on Natural Science and Green Technologies for Sustainable Development (NTSD 2022), jointly organized by School of Biological Sciences and Biotechnology, Goa University, and National Environmental Science Academy, New Delhi at the Goa University, India, 30th November – 2nd December, 2022 (talk on 1st December, 2022).
2022: Invited plenary talk: “Structural Proteomics: Engineering Heme Stability in Artificial Oxygen Carriers”, Proteomics Day Symposium, CSIR – Indian Institute of Chemical Biology (IICB), March 21, 2022. Kolkata, India.
2022: Chief Guest and Invited Talk “Chemistry, Physics, Biology: Proteins, Hemoglobins, Nature” National Science Day on the theme Integrated Approach in Science and Technology for Sustainable Future, Chaudhary Bansi Lal University, Bhiwani, Haryana, February 28, 2022.
2022: Invited Talk “Development of Strategies to Combat Human Diseases: Identification of Inhibitors of ARL15 with Potential to treat Rheumatoid Arthritis”, for Hirosaki Agriculture and Life Science Workshop (virtual), 2022, February 21-22, 2022 (talk on Feb 21, 2022), Hirosaki University, Japan.
2021: Invited Talk "Novel Plant Hemoglobin Proteome from Arabidopsis thaliana: What do their Structure and Fold Unfold?", Delhi University Botanical Society, Department of Botany, University of Delhi, Plant Proteomics Workshop on Next Generation Proteome Mining and Nano-Bio Interactions for Better Plant Growth, December, 29, 2021 (virtual platform)
2021: Invited Talk: “Hemoglobins – The Red Goldmine” at Miranda House, University of Delhi, in collaboration with Teaching Learning Center, Ramanujan College for Refresher Course in Life Sciences. September 13, 2021
2021: Invited Talk: “Hemoglobins – The Red Goldmine”, at the Department of Biochemistry, Dr N.P.G. Arts and Science College, Coimbatore, Tamil Nadu on June 4, 2021
2020: Invited Talk: “Drug Discovery Initiative to Combat Hypertension: A Heartening Story”, International Conference of Cardiovascular Sciences – 2020, Annual Conference of International Academy of Cardiovascular Sciences (IACS) – India Section (Theme: Convergence of Clinicians and Scientists for Cardiovascular Heath), in Delhi Pharmaceutical Sciences and Research University, New Delhi, February 21-23, 2020 (talk on Feb 22, 2020).
2019: Invited Talk: “Drug Discovery Initiative in Academia: How Far Can We Go?”, in Indian Association for the Cultivation of Science (IACS), Kolkata, India on November 14, 2019.
2019: Invited Talk: “Identification of Single Mutations in Hemoglobin Variants Using Modified Sample Preparation and Digestion and Separation Power of LC Coupled with MALDI MS/MS”, School and Symposium on Advances in Biomedical Mass Spectrometry and Metabolomics Workshop, Saha Institute of Nuclear Physics, Kolkata, India 11th – 17th November, 2019 (talk on 13th November, 2019)
2019: Invited Talk: “Novel Inhibitors of Dopamine Beta Hydroxylase as Potential Anti-Hypertensives: Drug Discovery and Validation” 6th Meeting of European Section and 7th Meeting of North American Section of the International Academy of Cardiovascular Sciences (IACS) organized by IACS-European and North American Section and Serbian Association for Arteriosclerosis, Thrombosis and Vascular Biology Research (11th – 14th September, 2019) on “Cardiometabolic Diseases: How New Research May Lead to New Cardioprotective Therapy”, Vrnjacka Banja, Serbia, 14th September, 2019.
2019: Invited Talk: “New Inhibitors of Dopamine Beta Hydroxylase to Treat Hypertension and Cardiac Hypertrophy: From Computers to Animal Models”, National Symposium on Recent Trends, Developments and Methodologies in Biophysics, Department of Biophysics, University of Delhi South Campus, September 7, 2019
2019: Resource Person as Speaker: “Drug Discovery Initiative: From Computers to Animal Models”, 24th Refresher Course in Life Sciences and Biotechnology”, Human Resource Development Centre, Jawaharlal Nehru University, August 29, 2019
2019: Invited Speaker: “Integrating Current Research with Teaching”, Faculty Development Programme: Academic and Research Excellence 2019 (27th-31st May, 2019), School of Applied Sciences, Amity University, Manesar, Haryana, May 28, 2019.
2019: Invited Speaker and Chief Guest: “The “Ramachandran” Peptide and Beyond”, National Symposium on Recent Advances in Biological Sciences and Launch of 3rd Edition of Departmental Magazine (BioKemi 2019), Department of Biochemistry, Shivaji College, University of Delhi South Campus, April 10, 2019.
2019: Invited Speaker: “New Inhibitors of Dopamine Beta Hydroxylase to Treat Hypertension and Cardiac Hypertrophy: From Computers to Animal Models, “BioEpoch 2019 – 11th Annual Conference of School of Biotechnology, Jawaharlal Nehru University, New Delhi, March 14, 2019.
2019: Invited Speaker: “Hemoglobins form Cyto-toxic Amyloids”, International Conference on Molecular Basis of Diseases and Therapeutics, School of Life Sciences, Central University of Rajasthan, Kishangarh, Rajasthan, March 8-10, 2019 (talk on 9th March, 2019)
2019: Invited Speaker: “Biochemists in Wonderland: What Lies Ahead”, Chief Guest Speaker in Biosparks 2019, Department of Biochemistry, Deshbandhu College, University of Delhi, New Delhi, February 20, 2019.
2019: Invited Speaker: “Spectroscopy as a Guide to Engineer Unprecedented Heme Stability in Hemoglobins to Facilitate Use of Artificial Blood Substitutes “, National Symposium on Applied Spectroscopy: Biology and Medical Science”, Department of Physics, Udai Pratap College, Varanasi, Uttar Pradesh, February 19-20, 2019 (talk on 19th Feb, 2019)
2019: Invited Speaker: “New Inhibitors against Dopamine Beta Hydroxylase to Treat Hypertension and Cardiac Hypertrophy: From Computers to Animal Models“, International Conference of the Academy of Cardiovascular Sciences (International Academy of Cardiovascular Sciences - India Section) on Translational Research in Cardiovascular Sciences, Sri Jayadeva Institute of Cardiovascular Sciences, held at the NIMHANS Convention Centre, Bangalore, Karnataka, February 15–17, 2019 (talk on 17th Feb, 2019).
2018: Invited as resource person for Innovation in Science Pursuit for Inspire Research (INSPIRE) Camp, Sponsored by Department of Science and Technology (DST), in Department of Biochemistry, Daulat Ram College, University of Delhi, New Delhi, Title of talk: “Story of Proteins – The Amazing Life Molecules”, Dec19, 2018
2018: Invited Speaker: “Basics of Mass Spectrometry and its Applications in Proteomics”, RCB Mass Spectrometry and Proteomics Workshop, Dec 17th-Dec 20th, 2018 (Lecture on 17th Dec, 2018)
2018: Invited Speaker: “Identification of Single Mutations in Hemoglobin Variants Using Modified Sample Preparation and Digestion Method and Separation Power of LC Coupled with MALDI MS/MS”, 10th Annual Meeting of Proteomics Society, India and International Conference on Proteomics for Cell Biology and Molecular Medicine, National Centre for Cell Science (NCCS), Pune, Dec 12-14, 2018 (Talk on 14th Dec, 2018)
2018: Panelist in Session on “Coronary Artery Disease, Hypertension and Diabetes as part of conference on “Cardiovascular Research Convergence” jointly organized by AIIMS, New Delhi and ICGEB, New Delhi, 13-14th October, 2018 (Panelist on 13th Oct; 10 minutes presentation on the Case Study produced by Doctors) (organizers: Dr Sandeep Seth; Dr. Amit Sharma)
2018: Invited as Chief Guest Speaker “Interesting advances in Hemoglobin Research: Beyond the Text Book”, Department of Biochemistry, Institute of Home Economics College, Delhi, 12thOctober, 2018.
2018: Invited as Chief Guest Speaker “Interesting advances in Hemoglobin Research: Beyond the Text Book”, Inauguration of the Botanical Society Fest Tarumitra, Department of Botany, Acharya Narendra Dev College, Delhi, 11thOctober, 2018.
2018: Invited as Chief Guest Speaker “Interesting advances in Hemoglobin Research: Beyond the Text Book”, Inauguration of the Zoological Society Inheritance, Department of Zoology, Zakir Husain Delhi College, Delhi, 17th September, 2018.
2018: Invited Speaker: “Inhibitors of Dopamine Beta Hydroxylase as Potential Anti-Hypertensives: How far are we?”, Protein Society Meeting in ICGEB, New Delhi, August 25, 2018
2018: Invited as Resource Person inThe Centre for Professional Development in Higher Education (CPDHE), UGC-HRDC, University of Delhi, for Refresher Course in Life Sciences, 17th July, 2018 to 6th August, 2018. Title of Talk: "A case study in drug discovery research: from laboratory to animal models" (Talk on 30th July, 2018)
2018: Invited Speaker: “Inhibitors of Dopamine Beta Hydroxylase as Potential Anti-Hypertensives: How far are we?”, Cardiovascular Diseases and Diabetes Biology Group, Rajiv Gandhi Centre for Biotechnology, Thiruvananthapuram, Kerala, May 29, 2018.
2018: Invited as resource person for Innovation in Science Pursuit for Inspire Research (INSPIRE) Camp, Sponsored by Department of Science and Technology (DST), in Department of Biochemistry, Shivaji College, University of Delhi, New Delhi, Title of talk: “Story of Proteins – The Amazing Life Molecules”, July 20, 2018
2018: Invited as resource person, XXVI Quality Improvement Programme for teachers of AICTE (AICTE approved), DIPSAR, PushVihar-Saket, 12th March to 16th March, 2018 (talk on 16th March, 2018)., Title of Talk – “Drug Discovery: A Humble Initiative”
2018: Review & Dissemination Meet, May Measurement Month (MMM2017), organized by Public Health Foundation of India (PHFI), International Society of Hypertension and World Hypertension League at India International Centre. Invited as Resource Person for Hypertension Campaign and Speaker, March 15th, 2018
2018: “Structure-based Drug Discovery to Combat Cardiovascular Diseases”, as Invited Speaker in the session “Drugs: Discovery, Delivery and Challenges” in National Conference on Diseases and Drugs: Emerging Trends and Challenges, 31st Jan-1st Feb, 2018, Zakir Hussain Delhi College, University of Delhi (talk on 1st Feb, 2018).
2018: “The Charm of Biochemistry: Scope, Applications and Research Prospects” as Invited Speaker in Shaheed Rajguru College for Women, Delhi University, Feb 2, 2018
2018: “Potential anti-hypertensives identified by structure-based methods – synthetic molecules and plant extracts”, as Invited speaker in the session “Newer aspects of CVD” in Annual Meeting and International conference on “Heart Failure: An update on Advances in Research and Treatment” by International Society of Heart Research – Indian Section (ISHR 2018), 16th-18th February, 2018 in Post Graduate Institute of Medical Education and Research (PGIMER), Chandigarh, India (talk on 18th Feb, 2018)
2018: “Structure-based Drug Discovery to Combat Cardiovascular Diseases” as Invited Speaker in Daulat Ram College, Delhi University Feb 20, 2018
2017: “Promising Tale of Structure-Based Drug Discovery: Dopamine Beta Hydroxylase as a Target to Combat Hypertension”, as Lead Speaker of the session in 86th Conference of Society of Biological Chemists “Emerging Discoveries in Health and Agricultural Sciences”,16th-19th November, 2017, School of Life Sciences, Jawaharlal Nehru University, New Delhi, India (talk on 18th Nov, 2017).
2017: Invited Talk, “Towards New Drugs for High Blood Pressure and Cardiac Hypertrophy: An Heartening Initiative”, in Biosparks 2017, School of Life Sciences, Jawaharlal Nehru University, New Delhi, March 31, 2017.
2017: Invited Talk, “Engineering Unprecedented Heme Stability in Hemoglobins to Facilitate Use of Artificial Blood Substitutes”, in National Symposium cum Bioinformatics Workshop on Current Trends in Proteomics and Bioinformatics, Interdisciplinary Biotechnology Unit, Aligarh Muslim University, Aligarh, March 16, 2017
2017: Invited Talk, “From a Chemical Reaction to Media Reaction: A Protein Driven Journey”, Key Note Talk, Current Trends in Protein Chemistry, Amity University, Gurgaon, March 2, 2017.
2017: Invited Talk, “Towards New Drugs for High Blood Pressure and Cardiac Hypertrophy: An Heartening Initiative”, in National Science Day Symposium, Feb 27-28, 2017, S.P. Jain Centre Auditorium, University of Delhi South Campus, New Delhi 110021 (talk on Feb 27th, 2017)
2017: Invited Talk, “Structure-based Drug Discovery to Combat Hypertension by Modulating an Unconventional Enzyme Target: From Defined Small Molecules to Plant Extracts” in International Conference on Recent Advances in Cardiovascular Research: Impact on Health and Disease, 9th Annual Conference of International Academy of Cardiovascular Sciences (India Section), Feb 9-11, 2017, Vallabhbhai Patel Chest Institute, Delhi, India (talk on Feb 11th, 2017).
2017: Invited talk, “Inhibiting Dopamine beta hydroxylase to treat hypertension: Promising tale of structure-based drug discovery”, Indo-US conference on “Advances in Enzymology: Implications in Health, Disease and Therapeutics”, ACTREC, Mumbai, Jan 17-19, 2017 (talk on Jan 18th).
2016: Invited talk, One day National symposium on “Perspectives in Genomics and Proteomics” (October 21st, 2016). The Department cum National Centre for Human Genome Studies and Research, Panjab University, Chandigarh.
2016: Resource Person, Lecture on “Hemoglobins: Novel Features and Applications” (17th October, 2016), 2nd Refresher course in Life Sciences and Biotechnology, Academic Staff College, JNU, New Delhi, October 3rd to October 28th, 2016, “Model organisms and topics in Biology”.
2016: Invited Talk “The interaction of acyl carrier protein and phosphopantetheinyl transferase in Leishmania is unique and amenable to small molecule intervention for anti-leishmanial activity”, National Seminar on Microbes for Human Health and Environment, Central University of Haryana, Mahendergarh, Haryana (September 9, 2016).
2016: Invited Talk “Identification of Single Mutations in Hemoglobin Variants Using Modified Sample Preparation and Digestion Method and Separation Power of LC Coupled with MALDI MS/MS”, Next-Gen Sequencing and Mass Spectrometry, Select Bio, Radisson Blu Plaza, New Delhi (August 20, 2016).
2016: Invited as resource person for Innovation in Science Pursuit for Inspire Research (INSPIRE) Camp, Sponsored by Department of Science and Technology (DST), in School of Basic Sciences and Research, Sharda University, Greater Noida, UP. Title of talk: “The Red Goldmine: Story of an Amazing Protein”, July 20, 2016
2016: Invited talk, “Novel features of an age-old classical biomolecule, hemoglobin, and applications thereof”, BioEpoch-2016, School of Biotechnology, Jawaharlal Nehru University, (March 15, 2016).
2016: Invited Talk, “Novel features of an age-old classical biomolecule, hemoglobin, and applications thereof”, Annual Meeting of the Indian Biophysical Society (8-10th Feb, 2016) on Molecules in Living Cells: Mechanistic Basis of Function, Indian Institute of Science (IISc.), Bangalore (Feb 10, 2016).
2015: Invited talk,“Proteomic investigation of C elegans upon bacterial infection”,Symposium on Proteomics, March 16th, 2015, Sri Venkateswara College, New Delhi, Silver Jubilee for Post-graduate Diploma.
2015: Short Talk, “Understanding the structure of Leishmania major Phosphopantetheinyl Transferase and its Interaction with cognate ACP”. Users Workshop for the Utilization of Indus Synchrotron beamlines and CRS Project Review Meeting, UGC DAE CSR and RRCAT, Indore (Jan 22-23, 2015).
2014: Invited Talk, BioWorld 2014, Kusuma School of Biological Sciences, IIT Delhi, December 12-14, 2014. Title of talk:“Engineering myoglobin to prevent heme dissociation: A step towards production of stable hemoglobin-based blood substitute”.
2014: Invited as Panelist for Panel Discussion in a session entitled “Meet the Editors”, as Chief Editor of JPP, in 6th Annual Meeting of the Proteomics Society of India, December 7-9, 2014 in Indian Institute of Technology (IIT) Bombay, Mumbai.
2014: Invited Talk, 6th Annual Meeting of the Proteomics Society of India and International Proteomics Conference on “Proteomics from Discovery to Function”, December 7-9, 2014 in Indian Institute of Technology (IIT) Bombay, Mumbai. Title of talk: “Proteomic investigation of Caenorhabditis elegans subjected to bacterial infection: Implication of unfolded protein response pathway”.
2014: Invited Talk, 43rd National Seminar on Crystallography, CSIR- Central Drug Research Institute Lucknow, November 12-14, 2014. Title of talk: “Plant Hemoglobin Structures from Arabidopsis thaliana Exhibit Novel Features Supporting Non-Classical Functions”.
2014: Guest Speaker, Annual Festival of Chemical Society, Department of Chemistry, Motilal Nehru College (Golden Jubilee Celebration), University of Delhi, New Delhi, March 28, 2014. Title of Talk: “Chemistry of Life: Introduction to Biomolecules and their Quantitation”
2014: “Hemoglobin Biology: Beyond the Text Book”, March 24, 2014, Science Association Festival “NOESIS-2014”, Sri Venkateswara College, University of Delhi, New Delhi
2014: “The Basics of Proteomics Investigation and Laboratory Set Up”, Department of Biotechnology, Alagappa University, Karaikudi, Tamil Nadu, March 18, 2014
2014: “Hemoglobin Biology: Beyond the Text Book”, Department of Biotechnology, Alagappa University, Karaikudi, Tamil Nadu, March 17, 2014
2014: Invited Talk, National Science Day Symposium, S.P. Jain Center, University of Delhi South Campus, New Delhi, India, Feb 27, 2014. Title of talk: “Translational Biochemistry: Striving to Diversify for Therapeutic Relevance”
2013: Lecture for1st Plant Proteomics Workshop / Training Programme, December 26-30, 2013, Department of Botany, University of Delhi, New Delhi, India. Title of talk: Setting Up Proteins and Proteomics Facility: An Outline.
2013: Invited talk, National Conference on Recent Trends in Structural Biology, Dec 16-18, 2013, Jamia Millia Islamia, New Delhi, India. Title of talk: Novel Modes of Ligand Binding Regulation in Hemoglobins: A comprehensive View.
2013: Invited talk, 42nd National Seminar on Crystallography and International Workshop on Application of X-ray Diffraction for Drug Discovery, November 21-23, 2013, Convention Center, Jawaharlal Nehru University, New Delhi, India. Title of talk: Novel Plant Hemoglobin Crystallographic Structures: What do their Architecture and Fold Unfold?
2013: Science remembrance talk, symposium on Ramachandran Manifestation: From Peptide to Proteome, Commemorating 50 Years of Ramachandran Map, March 14-15, 2013, Department of Biochemistry at University of Delhi South Campus and Sri Venkateswara College, New Delhi, India. Title of talk: The “RAMACHANDRAN” Peptide.
2013: Invited talk for Refresher Course, March 12, 2013, University of Delhi South Campus, New Delhi, India. Title of talk: The Magic of Protein Folding.
2012: Invited talk, International Interdisciplinary Science Conference on Protein Folding and Diseases, Dec 8-10, 2012, Jamia Millia Islamia, New Delhi, India. Title of talk: Stability, Folding and Amyloidogenesis of a Novel Hemoglobin – Model for Engineering Heme Stability.
2012: Invited Talk, XVIIth International Conference on Oxygen Binding and Sensing Proteins, 29th Aug – 1st Sept, 2012, University of Parma, Parma, Italy. Title of talk: Striking Aspects of Stability and Folding of a Cyanobacterial Globin.
2012: Invited Talk, National Seminar on Emerging Frontiers in Chemistry Series – III, Department of Chemistry, St. Xavier’s College, Kolkata, India, Feb 27-28, 2012. Title of talk: The Fascinating Story of the Globin World: Violating the Code of Conduct in the Red Bastion.
2012: Invited Talk, Annual Meeting of the Indian Biophysical Society, Jan 19-21, 2012, Centre of Advanced Study in Crystallography & Biophysics, University of Madras, Chennai, India. Title of talk: Pharmacophore Based Virtual Screening of Human Dopamine-?-Hydroxylase, a Drug Target for Complex Traits, Shows Promise.
2011: Lecture for Undergraduate students at Bioinformatics Centre, SriVenkateswara College, University of Delhi, New Delhi, India, July 2011. Title of talk: The In Silico Bonanza in Structure-function Investigation of Proteins: An Update.
2011: Invited Talk, National Science Day Symposium, S.P. Jain Center, University of Delhi South Campus, New Delhi, India, Feb 28, 2011. Title of talk: Spicing Up Hemoglobins: Strategies of a Lesser Mortal.
2010: Invited Talk, Symposium on Recent Trends in Biophysics, Indian Biophysical Society, Feb 13-15, 2010, Banaras Hindu University, Varanasi, UP, India. Title of talk:The red rebel: a cyanobacterial globin with unique properties.
2010: Introductory talk at Symposium on Emerging Trends in Globin Research: Need to Imbibe New Approaches and Technologies, February 6, 2010, Biotech Centre Auditorium, University of Delhi South Campus, New Delhi, India. Title of talk: Globin Research: Current Status, Scope, Prospects, UDSC Initiative.
2009: Lecture at Bioinformatics Centre, Sri Venkateswara College, University of Delhi, New Delhi, India for Undergraduate students. (Nov 7, 2009). Title of talk: The In Silico Bonanza in Structure-function Investigation of Proteins.
2008: Invited to IIT Madras (organizers: Department of Biotechnology), Chennai, India for a talk at the 77th Annual Meeting of Society of Biological Chemists (India), December 18-20th, 2008 (Theme: Impact of Basic and Translational Research on Medicine, Agriculture, and Industry). Title of Talk: Structural Novelty, Conformational Plasticity and High Stability in a Unique Hemoglobin from Synechocystis: Model for Heme Protein Based Biotechnological Applications.
2008: Invited to Aarhus, Denmark for a talk on “Plant Hemoglobins” at the XVth International Conference on Oxygen Binding and Sensing Proteins, August 17th-21st, 2008. Title of talk: How do symbiotic plant hemoglobins compare to hexacoordinate hemoglobins in stability and regulation of ligand binding?
2006: Invited to Department of Biochemistry and Molecular Biology, University of Parma, Parma, Italy, September 11, 2006. Title of talk: Regulation of Ligand Binding in Hemoglobins: From a single amino acid “flip” to unprecedented conformational change.

(82 invited talks)

Prof. Suman Kundu – Teaching Interests

Proteins – Structure, Folding and Engineering
Enzymes and their Biotechnological Applications
Advanced Techniques in Biochemistry (discipline specific elective)
Basics of Biochemistry (open elective)
Practicals related to Proteins and Enzymes
Research Methodology (Ph.D course work)
Educational Tours (organization and supervision)

Teaching

Courses taught

Modern Political Concepts GS-F211: 2012-13
Development Studies HSS F232: 2018-19
Technical Report Writing HSS F112 (as Instructor): 2019-20
Development Economics GS F234 (as Instructor): 2012-13

Previously taught or assisted

Introduction to the Humanities & Social Sciences: Lecturer from June 2011 - Feb 2012: to undergraduate students doing a B.A. (Philosophy) at Pradeepa: Pallottine Institute of Philosophy & Religion - a study centre of the National Open University (IGNOU).
Goa: Fertile Futures: Resource person and Critic at student’s final exams from 23^rd – 31^st May 2011: to students doing a Masters in Architecture at The Royal Institute of Art, Stockholm, Sweden.
Globalisation & Development: Teaching Assistant to Asst. Prof. Alito Siqueira, Dept of Sociology, Goa University from July – Dec 2010: Assisted in designing and delivering this course for students doing an M.A. (Sociology).

Courses Taught

Introduction to Algebraic Topology
Introduction to Topology
Measure and Integration
Differential Geometry
Mathematics I (Calculus)
Mathematics II (Elementary Linear Algebra and Complex variables)

Courses

Semester I 2024-2025

EEE G614 Advanced Wireless Communications
EEE/ECE/INSTR F435 Digital Image Processing

Semester II 2023-2024

ECE F344 Information Theory And Coding

Semester I 2023-2024

EEE/ECE F418 Modern Communication Technologies
EEE/ECE/INSTR F435 Digital Image Processing

Semester II 2022-2023

ECE F344 Information Theory And Coding

Semester I 2022-2023

CS/ECE/EEE/INSTR F215 Digital Design
EEE/ECE/INSTR F435 Digital Image Processing

Semester II 2021-2022

EEE/ECE F418 Modern Communication Technologies
EEE G613 Advanced Digital Signal Processing
ES ZG573/ EEE ZG573/ MEL ZG573 Digital Signal Processing

Semester I 2021-2022

CS/ECE/EEE/INSTR F215 Digital Design

Semester II 2020-2021

EEE/ECE F418 Modern Communication Technologies

Semester I 2020-2021

CS/ECE/EEE/INSTR F215 Digital Design

Teaching Contributions

Courses Taught

At Fairhaven College of Interdisciplinary Studies, Western Washington University, USA

1. Indian Films, Environmental Justice, and the Subaltern (5 credits)

At Birla Institute of Technology and Science-Pilani, K.K. Birla Goa Campus

Ecocriticism (3 credits)
Philosophy of Aesthetics (3 credits)
Literary Criticism (3 credits)
Technical Report Writing (2 credits)

At Central University of Tamil Nadu

1. British Literature I (M.A. English Studies - 5 Credits)

2. Introduction to Dravidian Literature (M.A. English Studies - 2 Credits)

3. Introduction to Comparative Literature (M.A. English Studies - 3 Credits)

4. Literary Criticism (M.A. English Studies - 5 Credits)

5. American Literature II (M.A. English Studies - 5 Credits)

6. British Literature III (M.A. English Studies - 5 Credits)

7. Language and Media (M.A. English Studies - 3 Credits)

8. New Literatures I (M.A. English Studies - 3 Credits)

9. Theory and Cultural Criticism (M.A. English Studies - 5 Credits)

10. Ecocriticism (Integrated M.Sc. - 2 Credits)

Contribution to Academics

Syllabi Framing

At Fairhaven College of Interdisciplinary Studies, Western Washington University, USA

1. Indian Films, Environmental Justice, and the Subaltern (5 credits)

At Birla Institute of Technology and Science-Pilani, K.K. Birla Goa Campus

Ecocriticism (Elective introduced in 2013)
Philosophy of Aesthetics (Elective Introduced in 2016)
Introduction to Video Games (Elective Introduced in 2016)
Video Games - Technology and Social Impacts (Elective for WILP, introduced in 2024) (along with Prof. Pranesh Bhargava, BITS Hyderabad)

At Central University of Tamil Nadu

1. Introduction to Dravidian Literature (along with Dr. Nirmal Selvamony)

2. Introduction to Comparative Literature (along with Dr. T. Jayaraman)

3. Language and Media

4. Theory and Cultural Criticism (along with Dr. T. Jayaraman)

5. Ecocriticism for Integrated Sciences (along with Dr. S. Susan Deborah)

My Essays and other works included in Syllabi:

1. “Towards Green Education” introduced in the Undergraduate course on Ecopoetics at Women’s Christian College, Chennai

2. The Story of Mudugar (Video-documentary made as part of my Ph.D. dissertation included in the Ecocriticism syllabus at Central University of Tamil Nadu, Thiruvarur

3. Culture and Media: Ecocritical Explorations taught as part of Green Studies course in Madras Christian College

4. Prepared the syllabus titled “Green Studies” for the newly introduced PG Programme in English at the Parvatibai Chowgule College of Arts and Science (Autonomous) along with Dr. S. Susan Deborah in the academic year 2018-2019

Courses Taught

Compulsory Courses

PHY C341 Nuclear Physics (IC)
PHY F343 Nuclear and Particle Physics (IC)
PHY F111 Mechanics, Oscillations and Waves (IC)
PHY F110 Physics Laboratory - I (IC)
PHY C352 Atomic and Molecular Spectroscopy (IC)
Physics Laboratory - II/ Advanced physics Laboratory (IC)
Modern Physics Laboratory (IC)
BITS F111 Thermodynamics (I)
PHY F212 Electromagnetic Theory - I (IC)

Electives Courses

PHY F215 Introduction to Astronomy & Astrophysics (IC)
PHY F317 Introduction to Radio Astronomy (IC)
Nuclear Astrophysics (Reading Course) (IC)

Project Courses

Study Oriented Projects
Lab Oriented Projects
Design Oriented Projects

Teaching

Multisection course:

BITS F111 - Thermodynamics : Lectures and Tutorials (since 2018 - 2022, as IC from 2019-2022)

CDC course:

CHE F213 - Chemical Engineering Thermodynamics (since 2017 - 2022, as IC since 2018-2022)

WILP Course:

PEZC 313 - Chemical Engineering Thermodynamics (as IC since 2017 - 2022)

Laboratory Course:

Chemical Engineering Laboratory (August - December 2017)

Academic and research background

PhD (2014): Tata Institute of Fundamental Research (TIFR), Mumbai

Thesis title: "Emergent properties in nanorod arrays and stabilization of novel crystallographic phases in nanorods and films"

MSc (2008): University of Calcutta

BSc (2006): Presidency College, University of Calcutta

Research Experience:

2014-2016: Post-doctoral Fellow, Leiden University, The Netherlands

2017-2020: Post-doctoral Fellow, Tel Aviv University, Israel,
PBC Fellowship for outstanding Chinese and Indian Post-doctoral fellows, Council of Higher education, Israel

Other qualifications:

2007: CSIR-UGC National Eligibility test (NET) qualified for Lectureship in Physical Sciences

2008: GATE in Physics, all India Rank: 6th

Teaching

Mathematical Methods in Chemical Engineering
Advanced Transport Phenomena
Transport Phenomena
Chemical Engineering Lab -1 and 2

Courses taught

Physics Laboratory I (PHY F110): Sem 1 and Sem 2 2020-21.
Mechanics, Oscillations and Waves (PHY F111): Sem 2 2020-21, Sem 1 2021-22, Sem 2 2021-22, Sem 2 2022-23.
Soft condensed matter (PHY F416): Sem 1 2021-22, Sem 1 2022-23.
Modern Physics Laboratory (PHY F244): Sem 2 2021-22.
Experimental methods of Physics (PHY F417): Sem 1 2022-23.
Electricity, magnetism and optics laboratory (PHY F214): Sem 1 2022-23.

Courses taught

BE(CS)	Object Oriented Programming, Data Structures and Algorithms, Operating Systems, Discrete Structures, Computer Networks (Lab), Microprocessor Programming and Interfacing (Lab)
MSc Tech(IS)	Computer Graphics
MSc (Physics)	Physics 1, 2, SSP, Compu. Physics, IMA,
ME(CS)	Adv. Operating Systems
ME(SS)	Object Oriented Analysis and Design
ME(Embedded Sys)	Software for Embedded Systems (TP), Networked Embedded Applications
Electives, Common courses	Network Programming, Computer Programming, Engineering Graphics(Lab)
WILP	Object Oriented Programming, Object Oriented Analysis and Design, Software for Embedded Systems, Network Programing, Intro to Comp Systems

Teaching

Courses teaching at BITS-Pilani, Hyderabad campus

First Degree

ME F320 Engineering Optimization
MF F421 Supply Chain Management
ME F452 Composite Materials & Design
BITS F110 Engineering Graphics
ME F443 Quality Control Assuarance and Reliability
MF F483 Sustainable Manufacturing
ME F243 Production Techniques I
ME F110 Workshop Practice
MF F341 Machine Tool Design
BITS F111 Thermodynamics
MF F311 Mechatronics
ME F215 Mechanical Engineering Laboratory

Higher Degree

ME F443 Quality Control Assuarance and Reliability (Current semester)
ITEB G621 Supply Chain Management (current semester)

(2004-2013)

Courses taught earlier at BITS-Pilani, K K Birla Goa campus

First Degree

Engineering Graphics
Thermodynamics
Applied Thermodynamics
MT II
Robotics
Workshop Technology
Production Techniques
Mechanical Technology

Higher Degree

Mechanisms and Robotics
Mechanical system Design

Teaching

At BITS

POMZG521 Statistical Process Control (WILP PG) 2021 (Jan), 2021 (August), 2022 (Jan), 2022 (August), 2023 (Jan), 2023 (July)
Research Methodology (PhD) 2024
ME F414 Fuel Cell Science and Technology (UG) 2020
ME F110 Workshop Practice (UG) 2018, 2022, 2023
MM ZG515 Quantitative Methods (WILP PG) 2018
ME F213/MF F213/ME F216 Materials Science and Engineering (UG) 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
QMZG 531 Statistical Quality Control (WILP PG) 2016
MST-F332 Materials Processing (UG) 2016, 2017, 2019, 2020, 2021
MF-F343 Casting and Welding (UG) 2016, 2017, 2018, 2020, 2021
ME-F452 Composite Materials and Design (UG) 2016
DE-G631 Materials Technology and Testing (PG) 2015, 2016, 2017, 2018, 2019
ME F366/ ME F367 Laboratory Oriented Project (UG) 2017, 2018
AETMZG 6612 Advances in Materials, Composites & Plastics (WILP PG) 2018
ME F215/ MF F215 Mechanical Engineering Laboratory (UG) 2018, 2019, 2020, 2021
ME F213 Production Technology 1 (UG) 2019, 2020
ME F266 Study Oriented Projects (UG) 2019, 2020

At NIT Calicut

Materials Science and Engineering (UG) 2014
Thermodynamics of Materials (PG) 2014
Characterization of Materials (PG) 2015
Ceramics Science & Technology (PG) 2015

2023

PHY F111 (Mechanics, Oscillations and Waves): Instructor [Aug-Dec]

PHY F110 (Physics Laboratory 1): Instructor [Aug-Dec]

PHY F110 (Physics Laboratory 1): Instructor [Apr-Jul]

Courses

On Campus Courses

Mechanical Vibrations (ME F343) Theory of Elasticity and Plasticity (ME G641)
Fracture Mechanics (DE G514)
Advanced Mechanics of Solids (ME F218)
Machine Design & Drawing (ME / MF F 241)
Machines and Mechanisms (ME F221)
Engineering Graphics (BITS F110)
Design Project (ME/MF F 376/377)
Study Oriented Projects (ME F266)
Workshop Practice (ME F112)

Off Campus Courses

Theory of Elasticity and Plasticity (DE ZG641)
Engineering Design (ET ZC413)

Courses Taught/Teaching

Mathematics-I (Calculus)- MATH C191-MATH F111

Mathematics-II (Linear Algebra & Complex Variable)- MATH C192-MATH F112

Mathematics-III (Differential Equations)- MATH C241-MATH F211

Discrete Structure for Computer Science- MATH C222

Discrete Mathematics- MATH F213

Graph Theory- MATH F243

Optimization- AAOC C222-MATH F212

Optimization –AAOC ZC222 (WILP)

Numerical Analysis- AAOC C341

Linear Algebra & Optimization- PERL ZC235

Cosmology- MATH F456

List of undergraduate students worked with me for their SOP/LOP/DOP (projects) and Thesis

1. Prateek Jain (2008B4AA498H)

Publication: Prateek Jain, Pradyumn Kumar Sahoo, Bivudutta Mishra: “Axially Symmetric Cosmological Model with Wet Dark Fluid in Bimetric Theory of Gravitation”, International Journal of Theoretical Physics, 51(8) (2012), 2546-2551 (Impact Factor 1.186) Springer

2. G. Chakradhar Reddy (2010B4A3589H)

Publication: P. K. Sahoo, B. Mishra, G Chakradhar Reddy: “Axially symmetric cosmological model in f(R,T) gravity”, European Physical Journal Plus, 129(3), (2014), 49 (Impact factor 1.475) Springer

3. Jeswitha Chintala Cheruvu (2010B4TS802H)

4. Srikanth Suresh (2011B4A7602H)

Publication: B. Mishra, P.K. Sahoo, Srikanth Suresh: “Non-existence of perfect dark energy fluid in Bianchi type-IV space time”, Astrophysics and Space Science, 358(1), (2015) 7. (Impact factor 2.401) Springer

5. Pratishtha Shukla (2011B4A3634H)

6. Amritha Jaydev KM (2011B4A7636H)

Publication: P Shukla, A Jayadev, LRS Bianchi Type-I Cosmology with Gamma Law EoS in f(R,T) Gravity, APPLICATIONS AND APPLIED MATHEMATICS-AN INTERNATIONAL JOURNAL, 11 (1), (2016) 229-237

7. Avinash Kumar Aman (2011B4A7661H)

Publication: B. Mishra, P. K. Sahoo, Avinash Aman: “Non-existence of Bianchi type IV space-time in modified gravity”, International Journal of Pure and Applied Mathematics, 108(1), (2016), 13-21 (Impact Factor 0.372) Academic Publications

8. Prasanth Sukumar (2011B5A1455H)

9. V. Raghavender Reddy (2013B4A7694H)

Publication: P. Sahoo, R. Reddy, LRS Bianchi Type-I Bulk Viscous Cosmological Models in f(R,T) Gravity, Astrophysics 61 (1), (2018) 134-143 (Impact factor 0.670) Springer

10. Parul Goyal (2013B4A7807H)

11. Kusuma Varun (2013A3PS381H)

12. Barkha Mahendrakumar Taori (2013B4A1492H)

Publications: P.H.R.S. Moraes, P.K. Sahoo, Barkha Taori, Parbati Sahoo, “Phantom energy dominated universe as a transient stage in f(R) cosmology”, International Journal of Modern Physics D, 28(10) (2019) 1950124 (Impact factor 2.17) World Scientific

P. Sahoo, B. Taori, K.L. Mahanta, Mixed fluid cosmological model in f(R,T) gravity Canadian Journal of Physics, 98(11) (2020) 981-992, (Impact factor 1.032) NRC Press

13. Veerav Chebrolu (2013B4AA886H)

14. Vedic Sharma (2014B4A7424H)

15. Dhruv Kulshreshtha (2014B4AA687H)

16. Saaransh Singhal (2014A4PS369H)

17. Vempali Mani Ratnam (2014A3PS434H)

18. Mullangi Sai Varun Reddy (2014B4A4944H)

19. Ahana Ghosh (2014B4A70525H)

20. Adira Mohitha (2015AAPS262H)

21. Katreddy Alekhya Suma (2015B4A80574H)

22. Anshuman Pati (2016B4A70470H)

23. Omkar Abhishek (2016B4A10449H)

24. T Rahul Raju (2016B4A10513H)

25. Shreyas Sunil Kulkarni (2016B4A70649H)

26. Shivaank Agarwal (2016B4A70675H)

Publication: P.H.R.S. Moraes, Pradyumn Kumar Sahoo, Shreyas Sunil Kulkarni, Shivaank Agarwal, “An Exponential Shape Function for Wormholes in Modified Gravity”, CHIN. PHYS. LETT. 36(12), (2019) 120401 (Impact factor 1.066) IOP

27. Ankush GK (2017B5A41552H)

28. Soumil Girish Sahu (2018A4PS0572H)

29. Siddharth Jagota (2018A7PS0166H)

30. Viral Tiwari (2018B4AA0795)

31. Rohan Dubey (2018B4A30939H)

32. Swapnil Das (2019A5PS1159H)

33. Raj Tripathi (2019B4A70869H)

34. Ritik Pachuri (2019B4AA0890H)

35. Subhrat Praharaj (2018B4A40714H)

Publication: Oleksii Sokoliuk, Subhrat Praharaj, Alexander Baransky, P.K. Sahoo, Accretion flows around exotic tidal wormholes I. Ray-tracing, Astronomy & Astrophysics (A&A), 665 (2022) A139 , (Impact factor 6.240) EDP, arXiv:2207.07193,

36. Vansh Madan (2018B4A70779H)

37. LImbodia Harrshit Anil (2019B4A40815H)

38. Dikshit Shreyas Sandeep (2020B4A82329H)

39. Challa Bhanu Pranav (2019A1PS1413H)

40. Subhrat Praharaj (2018B4A40714H)

Publication: Oleksii Sokoliuk, Simran Arora, Subhrat Praharaj, Alexander Baransky, P.K. Sahoo, On the impact of f(Q) gravity on the Large-Scale Structure, Monthly Notices of the Royal Astronomical Society (MNRAS), 522(1) (2023) 252-267, (Impact Factor 5.235) Oxford University Press,arXiv:2303.17341

41. Nilay Shrivastava (2019B4A31301H)

42. Mohammed Muzakkir Rizwan (2020B4PS2250H)

43. Siddhartha Kankipati (2019B4A70841H)

44. Madhamsetty Sai Mani Prithvi Raj (2019B4A21015H)

45. Sonakshi Mishra (2019B4AA0866H)

46. Mohammed Muzakkir Rizwan (2020B4TS2250H)

Publication: Mohammed Muzakkir Rizwan, Zinnat Hassan, P.K. Sahoo, Ali Ovgun, Influence of GUP corrected casimir energy on zero tidal forces wormholes in modified teleparallel gravity with matter coupling, European Physical Journal C, 84(11) (2024) 1132, (Impact factor 4.2) Springer, arXiv:2410.05348

Mohammed Muzakkir Rizwan, Zinnat Hassan, P.K. Sahoo, GUP corrected Casimir Wormholes with Electric Charge in f(R,Lm) Gravity, arXiv:2408.03969

Blog-1

Test

Courses Taught

CHEM F110: Chemistry Laboratory - The MSc. level course exposes students to experimental methods of chemistry and enables them to integrate theoretical knowledge and concepts with practical experience.

CHEM F111: General Chemistry - The MSc. level course covers fundamental concepts of organic, inorganic and physical chemistry.

CHEM F214: Inorganic Chemistry I - The MSc. level course covers the basic concepts of inorganic chemistry, such as structure and bonding of covalent and ionic compounds, periodicity in properties, electronegativity, acid-base and redox reactions, the chemistry of halogens, noble gases and main group elements, and the chemistry of macromolecules containing inorganic chains, rings and cages.

CHEM F241: Inorganic Chemistry II - The MSc. level course covers advanced topics in inorganic chemistry, such as structure, bonding, electronic spectra, and magnetism of coordination complexes, as well as structure, bonding and reactions of organometallic compounds.

CHEM G552: Advanced Inorganic Chemistry - The PhD level course covers advanced topics in inorganic chemistry, such as group theory and its applications to crystal field theory, molecular orbital theory and spectroscopy (electronic and vibrational), as well as reactions, kinetics, and mechanisms involving coordination complexes and organometallic compounds.

BITS G654: Advanced Instrumentation Techniques - The PhD level course covers the basics of several advanced analytical techniques and instrumentation practices that are commonly encountered in a chemistry and/or materials science R&D laboratory.

my teaching

qwfegf

dgdfhghj

Teaching @ BITS

Academic Year 2012-2013 - I Semester

1. Mechanics, Waves and Oscillations - I year undergraduate course

2. Measurement Techniques Lab I - I year undergraduate lab

Academic Year 2012-2103 - II Semester

1. Physics of Semiconductors - Open electives for III year students

2. Instrument Methods and Analysis Lab - III Year M.Sc Lab

Academic Year 2013-2014 - I Semester

1. Mechanics, Waves and Oscillations - I year undergraduate course

2. Measurement Techniques Lab I - I year undergraduate lab

Academic Year 2013-2014 - II Semester

1. Physics of Semiconductors - Open electives for III year students

2. Instrument Methods and Analysis Lab - III Year M.Sc Lab

Academic Year 2014-2015 - I Semester

1. Mechanics, Waves and Oscillations - I year undergraduate course

2. Measurement Techniques Lab I - I year undergraduate lab

Academic Year 2014-2015 - II Semester

1. Physics of Semiconductors - Open electives for III year students

2. Instrument Methods and Analysis Lab - III Year M.Sc Lab

Academic Year 2015-2016 - I Semester

1. Mechanics, Waves and Oscillations - I year undergraduate course

2. Measurement Techniques Lab I - I year undergraduate lab

Academic Year 2015-2016 - II Semester

1. Physics of Semiconductors - Open electives for III year students

2. Instrument Methods and Analysis Lab - III Year M.Sc Lab

Academic Year 2016-2017 - I Semester

1. Electromagnetic Theory I - II year undergraduate course for Physics, EEE and E&I Students

2. Measurement Techniques Lab I - I year undergraduate lab

Academic Year 2016-2017 - II Semester

1. Physics of Semiconductors - Open electives for III year students

2. Instrument Methods and Analysis Lab - III Year M.Sc Lab

Academic Year 2017-2018 - I Semester

1. Electromagnetic Theory I - II year undergraduate course for Physics, EEE and E&I Students

2. Electromagnetic and Optics Lab - II year M.Sc Physics lab

Academic Year 2017-2018 - II Semester

1. Solid State Physics - M.Sc Physics Core Subject for III year students

2. Instrument Methods and Analysis Lab - III Year M.Sc Lab

Academic Year 2018-2019 - I Semester

1. Electromagnetic Theory I - II year undergraduate course for Physics, EEE and E&I Students

2. Measurement Techniques Lab I - I year undergraduate lab

Academic Year 2018 - 19 II Semester

1. Solid State Physics - M.Sc Physics Core Subject for III year students

2. Instrument Methods and Analysis Lab - III Year M.Sc Lab

Academic Year 2019-2020 - I Semester

1. Mechanics Oscillations and Waves - I year undergraduate course

2. Electromagnetic and Optics lab - II Year M.Sc Lab

Academic Year 2019-2020 - II Semester

1. Solid State Physics - M.Sc Physics Core Subject for III year students

2. Modern Physics lab - III Year M.Sc Lab

Academic Year 2020-2021 - I Semester

1. Mechanics Oscillations and Waves - I year undergraduate course

2. Physics laboratory I - I Year common Lab course

Academic Year 2020-2021 - II Semester

1. Mechanics Oscillations and Waves - I year undergraduate course

2. Physics laboratory I - I Year common Lab course

Academic Year 2021-2022 - I Semester

1. Electromagnetic and optics lab - II year M.Sc lab course

2. Physics laboratory I - I Year common Lab course

Academic Year 2021-2022 - II Semester

1. Modern Physics lab - III year M.Sc lab course

2. Mechanics Oscillations and Waves - I year undergraduate course

Academic Year 2022-2023 - II Semester

1. Thermodynamics - I year Undergraduate Course

Academic Year 2023-2024 - I Semester

1. Physics of Semiconductor devices - III and IVth year Elective Course

2. Advanced Physics Laboratory - IV year M. Sc Lab course

Academic Year 2023-2024 - II Semester

1. Thermodynamics - I year Undergraduate Course

2. Physics laboratory I - I Year common Lab course

Academic Year 2024-2025 - I Semester

1. Physics of Semiconductor devices - III and IVth year Elective Course

2. Electromagnetism and optics lab - II year M. Sc Lab course

Courses Handled

Digital signal processing (EEE C415/ ECE/EEE F434)

Data communication and networks (BITS C372/ EEE F346)

Circuits and signals (EEE C272)

Electromagnetic fields and waves (EEE C433)

Mobile telecommunication networks (EA C452/ EEE F431)

Telecommunication switching system and networks (CS/EEE/INSTR C414, EEE/INSTR F414)

Communication systems (EEE C383/F311)

Signals and systems (EEE F243)

Microprocessor programming and interfacing (CS/EEE/INSTR F241)

Electrical sciences (EEE F111)

Control systems (ECE/EEE/INSTR F242)

Communication networks (ECE F343)

Digital design (CS/EEE/INSTR F215)

Telecom Network Management (SS ZG582)

Overview

Sravan Danda is an Assistant Professor (with OPERA award) at Computer Science and Informations Systems (CSIS) affiliated to APPCAIR at BITS-Pilani, Goa from September 2020. Prior to joining BITS-Pilani, Goa, he was a visitor at Systems Science and Informatics Unit (SSIU), Indian Statistical Institute (ISI), Bangalore from October 2019. During this period, he worked on developing algorithms for hyperspectral band selection using Mathematical Morphology (MM), a sub-area of Image Processing. He received his PhD in Computer Science from the same lab, SSIU, ISI-Bangalore in October 2019. In his PhD thesis, he established that, faster and efficient algorithms for image segmentation and filtering can be obtained by exploiting the contrast-invariance nature of its solutions. This was done by using power watershed framework from MM. Before joining the PhD program in 2013, he worked as a Business Analyst at Genpact, Retail Chain Analytics domain, Bangalore from October 2011 - September 2013. At Genpact, he was responsible for providing recommendations such as product pricing and stocking based on the behaviour of shoppers, backed up with statistical analyses on point-of-sale data. Prior to this, he received his B.Math.(Hons.) degree in Mathematics and M.Stat. degree in Mathematical Statistics and Probability from ISI, in 2009 and 2011 respectively.

My Teaching

Courses:

Measurement Techniques –II
Engineering Graphics
Mechanics of Solids
Advanced Mechanics of Solids and Kinematics
Robotics
Mechanisms and Robotics
Dynamics of Machines and Vibrations
Dynamics & Vibrations
Workshop Practice
Introduction to MEMS
Kinematics & Dynamics of Machines
Theory of Elasticity & Plasticity
Advanced Mechanics of Solids
Mechanical Vibrations
Mechanical Engineering Design
Design of Machine Elements
Advanced Engineering Mathematics
Machine Design and Drawing

Courses and Laboratory Development:

New Courses Developed :
- MEF413 Nonlinear Vibrations
- BITS F416 Introduction to Nanomechanics
- PHY F316 Musical Acoustics
- AETT ZG524 Vehicle Dynamics (WILP)
- AETT ZG621 Durability, Crash and safety Engineering (WILP)
New Minor Programs Developed:
- Robotics and Automation
- Computational Mechanics

Teaching Laboratory Development:

Coordinator for Design, development and commissioning of Machine Dynamics and Thermal Science Lab, Fluid Mechanics and Machines lab, Internal combustion Engines.
Lab Manual writing of MEF 112 Workshop Practice, TAC 222 Measurement Technique -II, BITS F415 Introduction to MEMS (COMSOL, Intellisuite), DEG611 Dynamics and Vibration
Research Laboratory Development:
- CNC lab-CNC lathe, CNC Milling, Coordinate Measuring Machine, ALB 20 Lathe(2006), Vertical Turret Milling machine(2011),
- Measurement Technique II lab- Universal Testing Machine (2006)
- IC Engine Lab-PC based multicylinder engine test rig (2006)
- Vibration lab-NVH analysis system(2012), sound power measurement system(2016)
- MEMS Simulation lab (2012)

*My Teaching Inspiration:

Where the mind is without fear

Where the mind is without fear and the head is held high

Where knowledge is free

Where the world has not been broken up into fragments by narrow domestic walls;

Where words come out from the depths of truth;

Where tireless striving stretches its arms towards perfection;

Where the clear stream of reason has not lost its way into the dreary desert sand of dead habit;

Where the mind is led forward by thee into ever widening thought and action into that heaven of freedom,

my father, let my country awake. - Rabindranath Tagore

ME F 314 Design of Machine Elements

This course will be offered by me in First semester 2024 and will have exciting learning by doing exercise in the form of project.

2022

2021-'22 Second Semester: Modern Physics Laboratory - PHY F244

2021

2021-'22 First Semester: Physics Laboratory - PHY F110

2023

2022-'23 Second semester: Advanced Quantum Field Theory - PHY G512

Thermodynamics - BITS F111

2022

2021-'22 Second semester: Methods of Mathematical Physics - PHY F243

Physics Lab - PHY F110

2022-'23 First semsetser: Introduction to Quantum Field Theory - PHY F412

Physics Lab - PHY F110

2021

2020-'21 Second semester: Electromagnetic Theory 2 - PHY F241

2021-'22 First semsetser: Mechanics, Oscillations and Waves (MOW) - PHY F111

Physics Lab 2: Electromagnetism and Optics - PHY F214

2020

2020-'21 First semester: Quantum Theory and Applications - PHY G514

2019

2018-'19 Second Semester: Advanced Physics Laboratory PHY F344

2019-'20 First Semester: Physics Lab - PHY F110, Mechanics, Oscillations and Waves (MOW) - PHY F111, Group Theory and Applications - PHY F422

Courses teaching

CHEM F111: General Chemistry (Tutorial)

CHEM F110: Chemistry Laboratory

CHEM F211: Physical Chemistry I

CHEM F323: Biophysical Chemistry

CHEM G555: Chemistry of Life Processes

CHEM F266: Study Project

BITS F221: PS-I (2023)

BITS F231: PS-I (2023)

Courses(2024-25)

First Semester, BITS F464 (Machine Learning):

Scope and Objectives of the course: This course is an undergraduate course on Machine Learning. ML is the sub-field of Artificial Intelligence. It helps engineers build automated systems that learn from experiences. It helps machines make data-driven decisions. For example, Google Maps for navigation uses the route network, real-time traffic characteristics, time of travel etc. to predict an appropriate path for you using ML algorithms. ML is a muti-disciplinary field, with roots in Computer Science, and Mathematics. ML methods are best described using linear and matrix algebra and their behaviour are best understood using the tools of probability and statistics. By integrating mathematical principles, you will learn to effectively address machine learning challenges, developing a deep understanding similar to that of professional data scientists. According to the latest estimates, 328 million terabytes of data are created daily. With this increasing amounts of data, the need for automated methods for data analysis continues to grow. The goal of this course is to develop methods that can automatically detect patterns in data, and then use the uncovered patterns to predict the future outcomes of interest. This course will cover many ML and Gen AI models and algorithms, including Linear regression, Multi-layer neural networks, Support vector machines, Bayesian networks, Gaussian mixture models, Clustering algorithms, Generative adversarial networks (GANs), RNNs, and Reinforcement learning techniques. Hands-on experience will be emphasized, allowing you to select optimal models and master the essential implementation details critical to their success. Practical sessions (Coding assignments) will involve working with real-world data, enhancing your proficiency in debugging and refining models through various ML techniques. The course objectives are the following:

To understand various ML techniques like Model selection, Under-fitting, Over-fitting, Cross-validation, Regularization etc.
To understand and build appropriate supervised learning algorithms for classification problems like Decision Trees, Naïve Bayes, Support vector machines (SVMs), Artificial Neural Networks etc.
To understand and build appropriate supervised learning algorithms for regression problems like Linear regression, Polynomial regression, Ridge regression etc.
To understand and build appropriate un-supervised learning algorithms for clustering, linear and non-linear dimensionality reduction etc.
To understand architectures and build Sequential and Generative AI models like RNNs, LSTMs, GANs etc.
To test run appropriate ML algorithms on real world and synthetic datasets and interpret their results over ML frameworks like ScikitLearn, TensorFlow, Keras, PyTorch etc.

Course Handout: Click here.

Class Presentations:

Sl. No.	Topic	Class Presentations
1.	Course Administration and Motivation	Click here
2.	Machine Learning Overview	Click here
3.	Machine Learning Frameworks	Click here
4.	Supervised Learning - I (Version Space)	Click here
5.	Supervised Learning - II (Decision Trees/ Random Forests)	Click here
6.	Model Evaluation (Bias, Variance, Cross-validation, Confusion Matrix, Out-of-Bag metric etc.)	Click here
7.	Regression Models (Linear Regression, Logistic Regression, Gradient Descent, Stochastic GD)	Click here
8.	Linear Discriminant Functions for Classification, Least Squares for Classification, Fisher's Discriminant Function	Click here
9.	Probabilistic approach to Machine Learning (Bayesian Networks, Naïve Bayes Algorithm)	Click here
10.	Neural Networks - I (Connectionist Models: Perceptron, Multi Layer Perceptron (MLP), Back Propagation Algorithm, Regularization, Augmentation)	Click here
11.	Neural Networks - II (Convolutional Neural Networks, Recurrent Neural Networks, Autoregressive Models and Generative Adversarial Networks (GANs))	Click here
12.	Instance-based and Kernel-based Learning (k-Nearest Neighbor (k-NN), and Support Vector Machines (SVMs))
13.	Un-supervised learning (K-Means Clustering, Gaussian Mixture Models, Principal Component Analysis (PCA) for feature reduction)
14.	Re-inforcement Learning (Markov Decision Process and Q-Learning)

Programming Assignments:

Sl. No.	Problem Definition	Problem Statement
1	Data Exploration, Pre-Processing and Data Wrangling	Click here
2	Decision Forests using TensorFlow	Click here
3	Regression and LDA using TensorFlow	Click here
4	Gaussian Naïve Bayes and Perceptron	Click here
5	Mini Project	Click here

Second Semester, CS F211 (Data Structures and Algorithms):

Scope and Objectives of the Course: A data structure is a collection of large amounts of data values, the relationships among them, and the functions or operations that can be applied on them. In order to be effective, data has to be organized in a manner that adds to the effectiveness of an algorithm, and data structures such as stacks, queues, linked lists, heaps, trees, and graphs provide different capabilities to organize and manage large amounts of data. While developing a program or an application, many developers find themselves more interested in the type of algorithm used rather than the type of data structure implemented. However, the choice of data structure used for a particular algorithm is always of paramount importance. For example, B-trees have unique abilities to organize indexes and hence are well suited for implementation of databases; Linked lists are well suited for backtracking algorithms like, accessing previous and next pages in a web browser; Tries are well suited for implementing approximate matching algorithms like, spell checking software or predicting text in dictionary lookups on Mobile phones; Graphs are well suited for path optimization algorithms (like in Google maps) or searching in a Social graph (like Facebook). As computers have become faster and faster, the problems they must solve have become larger and more complex, requiring development of more complex programs. This course will also teach students good programming and algorithm analysis skills so that they can develop such programs with a greater degree of efficiency.

The primary objectives of the course are as under:

Apply various basic data structures such as stacks, queues, linked lists, trees etc. to solve complex programming problems. Understand basic techniques of algorithm analysis.
Design and implement advanced data structures like graphs, balanced search trees, hash tables, priority queues etc. Apply graph and string algorithms to solve real world problems like finding shortest paths on huge maps or detecting plagiarism percentage.
Apply basic algorithmic techniques such as brute-force, greedy algorithms, divide and conquer, dynamic programming etc. to solve complex programming problems and examine their efficiency.

At the end of the course, you should understand common data structures and algorithms, be able to develop new data abstractions (interfaces) and use existing library components in C++.

Will appear soon...

Teaching

I teach courses in Networks and Systems, e.g., Computer Networks, Network Programming, Advanced Computer Networks, Software Development for Portable Devices, and Pervasive Computing.

Courses

Undergraduate courses taught

Artificial Intelligence
Data Structures and Algorithms
Foundations of Data Science

2019

lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum

2018

lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum lorem ipsum

Courses taught

ME F216 Materials Science and Engineering (Sem-I: 2022-23; 2023-24, 2024-25)
ME F219 Manufacturing Processes (Shared, Sem-II: 2023-24)
ME F320 Engineering Optimization (Shared, Sem-II: 2022-23)
BITS F110 Engineering Graphics (Lab, Shared, Sem-II: 2022-23)

Work Integrated Learning Program (WILP):

Engineering Materials (WILP, Sem-II: 2022-23)

Courses

ME F220: Heat Transfer
ME G515: Advanced Heat Transfer
ME G535: Advanced Engineering Mathematics
BITS F110: Engineering Graphics Lab

Work Integrated Learning Program (WILP)

DE ZG515: Computational Fluid Dynamics

Courses Taught/Teaching

Sanitation Financing and Project Management (SAN G514)

Principles of Management (MGTS C211/MGTS F211)

Marketing Research (MGTS C483/ECON F435)

Operations Management (MGTS C392)

Supply Chain Management (MF F421/MBA C421/MMZG 621/QMZG 621)

Research Methodology I (BITS E661)

Businee Policy Structure and Organization (MGTS G521)

Advanced Marketing Theories and Advertising (MGTS G513)

Marketing (MMZC 411)

Business Policy Structure & Organization (MGTS G521)

Design Project (ECON F376/ ME F376)

Advanced Project (BITS G511)

Study in Advanced Topics (BITS G513)

Special Projects (ECON F491)

Reading Course (BITS F382)

Professional Practice (BITS G619)

Research Practice (BITS G540)

First Degree Thesis (BITS C422T)

Mathematics and Statistical Methods (ECON F213)

Courses Taught Earlier

At BITS Pilani K K Birla Goa Campus

Spring 2024 (Semester II 2023-2024)

BA ZC414 : Optimization Methods for Business Analytics (IC: WILP Course) Link

Fall 2023 (Semester I 2023-2024)

MATH F421 : Combinatorial Mathematics (IC: Elective Course) Link
MATH F211 : Mathematics III (Integrated First Degree Course) Link

Spring 2023 (Semester II 2022-2023)

MATH F213 : Discrete Mathematics (IC: Elective Course) Link
BITS G539 : Research Project II (IC: PhD Coursework)

Fall 2022 (Semester I 2022-2023)

MATH F113 : Probability and Statistics (Integrated First Degree Course) Link
MATH F213 : Discrete Mathematics (IC: Mathematics Core Course) Link
BITS G529 : Research Project I (IC: PhD Coursework)

Spring 2022 (Semester II 2021-2022)

MATH F113 : Probability and Statistics (Integrated First Degree Course) Link
MATH F213 : Discrete Mathematics (IC: Elective Course) Link

Fall 2021 (Semester I 2021-2022)

MATH F113 : Probability and Statistics (Integrated First Degree Course) Link
MATH F213 : Discrete Mathematics (Mathematics Core Course) Link

At IISER Pune (Teaching Assistant)

Fall 2011: Linear Algebra (First-Year BS-MS Students)
Spring 2012: Multi-variable Calculus (Second-Year BS-MS Students)
Fall 2012: Multi-variable Calculus (Second-Year BS-MS Students)
Fall 2013: Algorithms (Third and Fourth-Year BS-MS Students)

Academic Training

Semester-Long Projects

Fall 2024:

Post-optimization of Covering Arrays, Laboratory Project (Student: Thejas Mouli)

Spring 2024:

A computational study of QI hypergraph, Design Project (Student: Aman Suryavanshi)
Uniform Covering Arrays, Study Project (Student: Aarya Niren Pai)
Sudoku Number of Graphs, Study Project (Student: Vedant Kamath)

Spring 2023:

Locating array on Graph and its properties, Laboratory Project (Student: Unnat Jain)

Fall 2022:

Combinatorial Testing Designs, Design Oriented Project (Student: Rohit Rajesh Jain)
A Study of locating array on Graph, Study Oriented Project (Student: Unnat Jain)
Applications of Graph Theory and Algorithms, Study Oriented Project (Student: Kushal Maheshwari)
A Study on Graph Coloring, Study Oriented Project (Student: Devansh Agarwal)

Spring 2022:

Qualitative Independence Graph and Generalization, Study Oriented Project (Student: Rohit Jain)
A Study of Combinatorial Testing, Study Oriented Project (Student: Khadke Tejas Hemant)
A Study of Covering Arrays, Study Oriented Project (Student: Sarthak Choudhary)
Orthogonal Arrays and Applications, Study Oriented Project (Student: Aditi Kashyap)
Covering Perfect Hash Families, Study Oriented Project (Student: Sarthak Krishna)
Evaluation of Combinatorial Testing Arrays, Design Oriented Project (Student: Hrishikesh Pradhan)
Computation of efficiency measures in Design, Design Oriented Project (Student: Siddhant Gupta)

Courses I Teach

PHY F111 Mechanics, Oscillations and Waves

Foundational physics course for all streams, texts: Mechanics, Kleppner and Kolenkow; Vibrations and Oscillations, A P French

PHY F212 Electromagnetic Theory 1

Basic electrical and magnetic theory, Text: Introduction to Electrodynamics, D J Griffiths

PHY F213 Optical Physics and Applications

Basic geometric and physical optics, based on texts Optics, E Hecht, Optics, A Ghatak

PHY F242 Quantum Mechanics I

Introductory Quantum mechanics, core Physics. Text books: Modern Approach to Quantum Mechanics, J S Townsend; Quantum Mechanics by R Shankar.

PHY F243 Methods of Mathematical Physics

Fundamental mathematical techniques used in physics such as ODEs, boundary value problems and Green's function techniques, vector analysis, linear algebra. Text: Mathematical Methods in Classical and Quantum Physics, Tulsi Dass and Satish Sharma

PHY F311 Quantum Mechanics II

Advanced Quantum Mechanics , core physics course, based on text book Modern Quantum Mechanics by J J Sakurai

PHY G512 Quantum Theory and Applications

PhD course introducing the concepts and applications of Quantum Theory. Text book: Principles of Quantum Mechanics by R Shankar

BITS F386 Introduction to Quantum Information and Computation*

Open elective, introduces foundational concepts of Quantum Mechanics and application to Quantum Computing and information.Text: Introduction to Quantum Physics and Information Processing, Radhika Vathsan CRC Press, 2015.

PHY F413 Particle Physics

Elective course introducing the standard model of particle physics, based on the text book Introduction to Elementary Particles, D Griffiths

PHY F420 Quantum Optics

Advanced 4 unit elective, introduces quantum optics and its modern applications. Text book: Introductory Quantum Optics, C C Gerry and P L Knight)

PHY F428 Quantum Information Theory

Advanced course on quantum information theory, mathematical foundations and applications. Txt book: Quantum Information Theory, by Mark M Wilde, 2017.

BITS F111 Thermodynamics

Fundamentals of Thermodynamics, Sonntag and Borgnakke

Computer Programming 1

"Introduction to Computing Systems", by Patt and Patel.

EA F443 Digital Image Processing

Digital Image Processing, by Gonzalez and Woods; Foundations of Coding by J Adamek

MUSIC audit courses

Introduction to Carnatic Music, Indian Classical Music (Instrument): Carnatic Veena.

Courses

Current Semester

Aug- Dec 2024:

Mathematics I- Multivariate Calculus
Topics in Algebra
Reading Course- General Number Field Sieve

Previous semesters- Teaching:

Elective Courses

Number Theory ( Jan- May 2022, 2024)

PhD Courses

Topics in Algebra ( Jan- May 2023)

First year Courses

Mathematics I- Calculus ( Aug -Dec 2021, 2022, 2023)
Mathematics II- Linear Algebra & Complex Variables ( Jan- May 2022, 2023, 2024)

Reading Courses

Introduction to Elliptic Curves ( Aug- Dec, 2022)
Mathematics in Technology ( Aug-Dec, 2023)

Courses

CHEM F110: Chemistry Laboratory
CHEM F111: General Chemistry
CHEM F341: Chemical Experimentation II
CHEM G559: Advanced Bioinorganic Chemistry
CHEM F214: Inorganic Chemistry I
CHEM F343: Inorganic Chemistry III
CHEM G555: Chemistry of Life Processes
CHEM F376: Design Oriented Project
CHEM F266: Study Project

Overview

Academic Training duplicate cloned

Teaching activities

Courses

ME F485: Numerical Techniques for Fluid Flow and Heat Transfer
ME G535: Advanced Engineering Mathematics
BITS F111: Thermodynamics
ME F217: Applied Thermodynamics Laboratory
ME F220: Heat Transfer Laboratory
BITS F110: Engineering Graphics

DE ZG515: Computational Fluid Dynamics (Work Integrated Learning Programme)

Academic Training 2

PhD in Shallow water Waves and Partial Differential Equations , Mathematical Sciences - University of Texas Arlington, 2008, Texas, USA.
MS Computational Mathematics - Clemson University, , Clemson, SC, USA. 2003

Teaching

Lecture courses

(1) Organic Chemistry IV Chem F342, General Chemistry Chem F111, Green Chemistry & Catalysis Chem F337, Supramolecular Chemistry Chem F328, Organic Chemistry I Chem F212, Organic Chemistry II Chem F243, Organic Chemistry and Drug Design Chem F335

Laboratory courses

(1) Chemical Experimentation I Chem F242, Chemistry Laboratory Chem F110,
Chemical Experimentation II Chem F341

Academic Training

Courses Handled:

Manufacturing Management
Engg graphics
Statistical Quality Control
Quality Control Assurance and Reliability
Reliability engineering
Engineering Optimization

Professional Experience

Assistant Professor, Department of Biotechnology, Institute of Chemical Technology Mumbai - IndianOil Odisha Campus Bhubaneswar (Dec 2019 - Feb 2023)
Research Assistant, School of Biotechnology, Kalinga institute of Industrial Technology Bhubaneswar (Jun 2019 - Nov 2019)

Academic Training

Teaching activities

Courses Taught

BIO F111: GENERAL BIOLOGY (Previously BIO C111)
BIO F 212: MICROBIOLOGY (Previously BIO C212)
BIO F211: BIOCHEMISTRY
BIO C331: BIOPHYSICS
BIO C322: ECOLOGY (Previously BIO C322)
BIO C332: GENETICS
BIO F342: IMMUNOLOGY (Previously C 416)
BIO F244: INSTRUMENTAL METHODS OF ANALYSIS (Previously C391)
BIO C 231: BIOLOGY PROJECT LABORATORY
TA C211: MEASUREMENT TECHNIQUES 1(Biology)
BIOT F422: NANOBIOTECHNOLOGY
BIO G514: MOLECULAR IMMUNOLOGY
BIO G523: ADVANCED APPLIED MICROBIOLOGY
BIO G513: MICROBIAL FERMENTATION TECHNOLOGY
BIO G651: PROTEIN AND ENZYME ENGINEERING

Project Based Courses

BITS C313; BITS C314: LABORATORY ORIENTED PROJECT
BITS C323; BITS C324: STUDY ORIENTED PROJECT
BITS C382: READING COURSE
BITS G620; PROFESSIONAL PRACTICE I
BITS G621; PROFESSIONAL PRACTICE II
BITS G540 RESEARCH PRACTICE
BITS C421T THESIS
BITS 629T DISSERTATION
BIO C 491 SPECIAL PROJECTS

Academic Training

PhD in Shallow water Waves and Partial Differential Equations , Mathematical Sciences - University of Texas Arlington, 2008, Texas, USA.
MS Computational Mathematics - Clemson University, , Clemson, SC, USA. 2003
BE (Computer Science and Engineering)-Jawharlal Nehru National College of Engineering (First Class with Distinction), 1999

Courses I Teach

On Campus Courses

ME/MF F212 Fluid Mechanics
ME/MF F214 Applied Thermodynamics
ME F418 Rockets and Spacecraft Propulsion
ME F484 Automotive Technology
BITS F111 Thermodynamics
ME G515 Computational Fluid Dynamics
MEG 621 Fluid Dynamics
ME F215 Mechanical Engineering Lab
ME F110 Workshop Practice
ME F317 Engines, Motors and Mobility

Off Campus Courses

EDLT ZC 341 Thermal Engineering 1
ET ZC 232 Manufacturing Processes
ENGG ZC 232 Engineering Materials
QM ZG 536 Design of Experiments
AEZG516 Advances in IC Engines

Teaching

Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum Lorem Ipsum

Teaching

BITS F415 - Micro-Electro-Mechanical Systems (MEMS)

BITS F417 / ME F423- Microfluidics and its Applications

BITS F415 - Micro-Electro-Mechanical Systems (MEMS)

DE ZC415/MEL ZC415 : Introduction to MEMS (WILP)

BITS F415 - Micro-Electro-Mechanical Systems (MEMS)

BITS F417 / ME F423- Microfluidics and its Applications

DE ZC415/MEL ZC415 : Introduction to MEMS (WILP)

BITS F415 - Micro-Electro-Mechanical Systems (MEMS)

MEL G611 IC Fabrication Technology

Teaching

Teach courses in the area of Computer Networking, Computer Architecture, Storage Networks and Computer Programming.

Some of the key courses are Data Storage Technologies and Networks, Advanced Computer Networks, Computer Networks, Computer Programming, Computer Organization & Architecture, Advanced Programming Techniques, Structured Programming, Software for Embedded Systems, Digital Electronics & Microprocessors, Computer Organization & Software Systems, and Advanced Computer Architecture

Digital Course Content (video) Development:

Computer Organization and Architecture
Data Storage Technologies and Networks
Computer Programming
Advanced Computer Networks

Courses Taught

Human Computer Interaction (2019-20 Semester 1, 2020-21 Semester 1, 2020-21 Semester 2, 2022-23 Semester 1)
Information and Communication Technologies and Development (2019-20 Semester 2, 2021-22 Semester 1, 2022-23 Semester 2)
Computer Networks (2019-20 Semester 2, 2020-21 Semester 2)
Computer Networks (co-teaching) (2021-22 Semester 2, 2022-23 Semseter 2)
Operating Systems (co-teaching) (2019-20 Semester 1, 2020-21 Semester 1, 2021-22 Semester 1)
Operating Systems (2021-22 Semester 2, 2022-23 Semester 1)

Tare, M., Roy, O. R., Singh, A. “Molecular genetic mechanisms of axial patterning: Mechanistic insights into generation of axes in the developing eye”.

A. Singh, M. Kango-Singh (eds.), Molecular Genetics of Axial Patterning, Growth and Disease in Drosophila Eye, DOI 10.1007/978-1-4614-8232-1_9, © Springer Science+Business Media New York 2013.

Rai, A.#, Kanodia, H$., Narwal, S., Tare, M.*“Eye for an eye: A Comparative Account on Compound Eye of Drosophila melanogaster with Vertebrate Eye.”

Springer Nature Switzerland AG 2020 A. Singh, M. Kango-Singh (eds.), Molecular Genetics of Axial Patterning, Growth and Disease in the Drosophila Eye. (*Communicating author; # Thesis Higher degree student; $ Undergraduate Student).

Oros, S.M., Tare, M., Kango-Singh, M. and Singh, A. (2010).

Dorsal eye selector pannier (pnr) suppresses the eye fate to define dorsal margin of the Drosophila eye. Developmental Biology. 346(2):258-71. (* Equal Contribution)

Tare, M., Modi, R.M., Nainaparampil, J.J*., Puli, O.R., Bedi, S.,Fernandez-Funez, P., Kango-Singh M., Singh A. (2011).

Activation of JNK Signaling Mediates Amyloid-ß-Dependent Cell Death. PLoS ONE 6(9):e24361. doi:10.1371/journal.pone.0024361. (*Equal contribution).

Singh, A., Tare, M., Kango-Singh, M., Son, W.-S., Cho, K.-O. Choi, K.-W. (2011).

Opposing interactions between homothorax and Lobe define the ventral eye margin of Drosophila eye. Developmental Biology. 359 (2011) 199–208.

Singh, A., Tare, M., Puli- Roy, O., Kango-Singh, M. (2011).

A glimpse into Dorso-ventral patterning of the Drosophila eye. (Review). Developmental Dynamics. 241(1):69-84. doi: 10.1002/dvdy.22764.

Tare,M., Puli- Roy, O., Moran, M. M., Kango-Singh, M., Singh, A. (2013).

"Domain specific genetic mosaic system in the Drosophila eye. Genesis. 51(1):68-74. (*Equal contribution). doi: 10.1002/dvg.22355.

Steffensmeier, A.M., Tare, M., Puli, O.R., Modi, R., Nainaparampil, J., Kango-Singh, M., Singh, A. (2013).

Novel neuroprotective function of apical-Basal polarity gene crumbs in amyloid Beta 42 (aβ42) mediated neurodegeneration. PLoS One.18; 8(11):e78717. doi: 10.1371/journal.pone.007871.

Moran, M.T., Tare, M., Kango-Singh, M., Singh, A.(2013).

Homeotic Gene teashirt (tsh) Has a Neuroprotective Function in Amyloid-Beta 42 Mediated Neurodegeneration. PLoS One. 8(11):e80829. doi: 10.1371/journal.pone.0080829.

Orme, M. H., Liccardi, G., Moderau, N., Feltham, R., Wicky-John, S., Tenev, T., Aram, L., Wilson, R., Bianchi, K., Robertson, D., Tare, M., Wepf, A., Williams, D., Bergmann, A., Gstaiger, M., Arama, E., Ribeiro P. S., and Meier, P. (2016).

The unconventional myosin CRINKLED and its mammalian orthologue MYO7A regulate initiator caspases in their signalling roles. Nature Communications 7, Article number: 10972 doi:10.1038/ncomms10972.

Fogarty, C.E., Lindblad, J.L., Diwanji, N., Tare, M., Amcheslavsky, A.* Makhijani, K. , Brückner, K. , Fan, Y., and Bergmann, A. (2016).

Extracellular Reactive Oxygen Species drive Apoptosis induced Proliferation via Drosophila Macrophages. Current Biology Biol. pii: S0960-9822(16)00049-X. doi: 10.1016/j.cub.2015.12.064. (*Equal Contribution)

Tare, M., Sarkar, A., Bedi, S., Kango-Singh, M. and Singh, A. (2016).

Cullin-4 regulates Wingless and JNK signaling mediated cell death in the Drosophila eye. Cell Death and Disease 7, doi:10.1038/cddis.2016.338.

Irwin, M., Tare, M., Singh, A., Puli, O.R., Gogia N., Riccetti, M., Deshpande, P., Kango-Singh, M. and Singh, A. (2020).

A Positive Feedback Loop of Hippo- and c-Jun-Amino-Terminal Kinase Signaling Pathways Regulates Amyloid-Beta-Mediated Neurodegeneration. Front. Cell Dev. Biol. 8:117.

Tare, M., Chimata, AV, Gogia, N, Narwal, S, Deshpande, P, Singh, A.

An E3 ubiquitin ligase, cullin‐4 regulates retinal differentiation in Drosophila eye. genesis. 2020; 58:e23395. https://doi.org/10.1002/dvg.23395.

Lindblad, J.L., Tare, M.,Amcheslavsky,A., Shields, A. & Andreas Bergmann. (2021).

Non‑apoptotic enteroblast‑specific role of the initiator caspase Dronc for development and homeostasis of the Drosophila intestine. Sci Rep. 2021; 11: 2645. Published online 2021 Jan 29. doi: 10.1038/s41598-021-81261-0

Post Doc. and Ph. D. Supervision

Assessment of problem solving and social skills in engineering education: Bridging the gap between academia and industry, Funded by Indian Council of Social Science Research (ICSSR), Dec 2019 – Nov. 2021, Dr. (Mrs.) Rajni Singh (Post Doc)
Development and Validation of Performance Measures for World Class Manufacturing (awarded), 2006, Dr A K Digalwar
Development and Validation of Performance Measures for Environmentally Conscious Manufacturing (awarded), 2009, Dr P J Singh (as co-supervisor)
Development and Validation of Lean Manufacturing Drivers, Barriers and Framework with a focus on Ceramic Industry (awarded), 2013, Dr J P Bhamu
Selected Experimental Studies on Machinability of Ti54M, Ti10.2.3, Ti5553 and Ti6Al4V Titanium Alloys (awarded), 2013, Dr Navneet Khanna
Development and Validation of Drivers for, Barriers to and Stakeholders of Green Manufacturing (awarded), 2014, Dr V K Mittal
Multi-objective Design and Optimization of a Closed-loop Supply Chain Network, and Assessment of Collection Methods, Product Recovery Methods and Network Configurations (awarded), 2015, Dr Anil Jindal
Prediction and Optimization of Machining Parameters for Minimizing Surface Roughness and Power Consumption during Turning of AISI 1045 Steel (awarded), 2016, Dr Girish Kant
Development of a sustainability Assessment Framework for manufacturing industry (awarded), 2018, Dr V Bhakar
Development of an integrated performance measurement framework for leanness assessment of manufacturing organizations (awarded), 2019, Dr Narpat R Sangwa
Development of performance measures to evaluate green supply chain in Indian ceramic industry (awarded), 2019, Dr Kailash Choudhary
An experimental analysis of energy consumption and environmental impacts of milling process (awarded), 2020, Dr Nitesh Sihag
Study of EFQM Business Excellence Model in Industry 4.0 Era, (awarded), 2021, Dr. Narasimha Murthy
Productivity Improvement in Micro, Small and Medium Automotive Enterprises by Using Lean Tools and Techniques, Krishan Rohilla
Development of a Cyber-Physical Production System Framework for Resource and Energy Efficiency at Factory level, Rishi Kumar
Investigations on Thin-Wall Machining of Curved Geometries, Pawar Shrikant Shankarrao (as co-supervisor)
Design of Resilient and Sustainable Supply Chains, Akshay Patidar (as co-supervisor).
Empirical Studies on Lean and Green Practices in Indian Small and Medium Enterprises, Pankaj Kumar Soni
Development of Industry 4.0 Enablers and Challenges for Indian Industry, Rupen Trehan (as co-supervisor)
Development of a Cognitive Interoperable Digital Twin for Manufacturing Application, Suveg V. Iyer
Numerical and Experimental Investigation of Accuracy Improvement Techniques for Non-Contact Measuring Instruments, Sowrabh Kugunavar
Development of a Mathematical Model for Circular Economy, Vijaypal Poonia (as co-supervisor)

Graduate Students (Pursuing PhD)

Ms. Sonia Narwal (2018-present)
Mr. Shreyas Iyer (2020-presnt)

TECH. MAGAZINES & VIDEOS

Satoshi KOJIMA, Aditi KHODKE, Vimlendu Kumar JHA, Ashim BERY, Kuldip Singh SANGWAN, Kailash CHOUDHARY, “New Delhi in 2030: Envisioning 1.5-Degree Lifestyles”, Published by Institute for Global Environmental Strategies Japan. Findings of the ‘Envisioning Future Low-Carbon Lifestyles and Transitioning Instruments’ demonstration project, 2019-2021. This project was implemented under the United Nations’ One Planet network, administered by the United Nations Environment Programme (UNEP).
Kuldip Singh Sangwan, Circular Economy: Challenges inherent to circular economy are more pronounced in India, Down to Earth, 15-30 June 2019.
Kuldip Singh Sangwan, Love thy vendor, Business Standard – The Strategists, December 9, 2013, Front Page.
Kuldip Singh Sangwan, Views on "Fostering eco-innovation" by Indira Rao, Efficient Manufacturing, September/October 2011.
Kuldip Singh Sangwan, Development of Energy Efficient Machine Tools. Pro|MFG Media. https://www.youtube.com/watch?v=N2rxL_rpj4M

Dual Degree Courses

BIO F211 Biological Chemistry (II Year, I semester)
BIO F341 Developmental Biology (III Year, II Semester)

First Year Courses

BIO F111 General Biology (I Year)
BIO F110 Biology Laboratory (I Year)

Publication

Rahul S Mor, Sachin Kamble, Kuldip Singh Sangwan (eds), Operations and Supply Chain Management in the Food Industry, Springer. ISBN 978-981-16-5555-5. DOI 10.1007/978-981-16-5555-5

Kuldip Singh Sangwan and Christoph Herrmann (eds), Enhancing Future Skills and Entrepreneurship, 2020 Springer Nature Switzerland AG, ISBN 978-3-030-44248-4. https://www.springer.com/gp/book/9783030442477

Expert

Directory of Life Sciences in India

Member

International Society of Mycorrhizologists

Life member

Association of Microbiologists of India

The Arid Zone Research Association of India

The Biotech Research Society of India

Evaluated various project proposals

Evaluated various project proposals sent by Czech Science Foundation, Government of the Czech Republic, Praha, Czech Republic; University “G.d’Annunzio”, Chieti-Pescara, Italy; European Research Council (ERC), Brussels, Belgium; DST, New Delhi; DBT, New Delhi.

Reviewer

PLoS One, ACS Sustainable Chemistry and Engineering, Journal of Nanoparticle Research, Molecular Biology Reports, Journal of Biomedical Nanotechnology African Journal of Biotechnology, Antonie Van Leeuwenhok, Letters in Applied Microbiology, Comptes Rendus Biologies etc.

Editorial Board Member

Journal of virology & Mycology

Associate Editor

Advances in Environmental Biology

Journal of Medicinal Plant Research

American-Eurasian Journal of Agricultural & Environmental Sciences

World Journal of Agricultural Sciences

Technical Editor

Research Journal of Soil Biology

Panwar, J., Bhargava, A., Dilip, R.V. and Pareek, V. 2015.

Rhizospheric metal tolerant fungal isolates: Leading edge tool for sustainable synthesis of metal and metal oxide nanoparticles. In: 2nd International Conference on Crop Improvement(ICCI-2015), Universiti Putra, Putrajaya, Malaysia. December 2-3, 2015, p. 34. (Plenary Lecture).

Pareek, V., Bhargava, A., Khan, M.A., Dilip, R.V., and Panwar, J. 2015.

Enhanced catalytic degradation of rhodamine B using mycogenic gold nanoparticles. In: 4th International Conference on Advanced Nanomaterials and Nanotechnology, December 8-11, 2015, Indian Institute of Technology, Guwahati.

Fageria L., Dilip, R.V., Panwar, J. and Chowdhury, R. 2016.

The anti-cancerous effect of biologically synthesized silver nanoparticles in human hepatoma cells. In: BITS Conference on Gene and Genome Regulation (BCGGR 2016), February 18-20, 2016, Pilani, Pilani Campus, Pilani, p. 63.

Pareek, V., Dilip, R.V., Bhargava, A., and Panwar, J. 2016.

Synthesis of multifarious metal nanoparticles from metal tolerant fungus Penicillium janthinellum DJP06. In: 2nd International Conference on Recent Advances in Nanosciences and Nanotechnology (ICRANN-2016), December19-20, 2016, Jawaharlal Nehru University, New Delhi, p. 83.

Gupta, R. Pareek, V., and Panwar, J. 2017.

Evaluation of mechanism behind the bactericidal action of silver on Escherichia coli. In: International Conference on Nano and Functional Materials (NFM-2017). November 16-18, 2017, BITS Pilani, Pilani Campus, Pilani, p. 66.

Pareek, V., Bhargava, A., Vishalakshi and Panwar, J. 2017.

Mechanistic side of myco-protein mediated synthesis of silver nanoparticles. In: 58th Annual Conference of Association of Microbiologists of India (AMI-2017). November 16-19, 2017, Babasaheb Bhimrao Ambedkar University, Lucknow, p. 334.

Saxena, V., Tare, M., Garg, S., Chowdhury, R. Marathe, S., Majumder, S., Panwar, J., Jha, P.N., Mukherjee, S. and Sharma, P.K. 2018.

Composing an interactive question paper to generate interest of students and de-stress them during examination. In: National Workshop on Improving Synergy between Teaching and Research in Indian Academia (ISTRIA 2018), March 26-27, 2018, BITS Pilani - Pilani Campus, Pilani, p. 45.

Pareek, V., Gupta, R., Khan, M.A., Bhargava, A., Vishalakshi, Panwar, J. 2018.

Evaluation of mechanism behind the antibacterial action of silver ions. In: International Conference on Microbial, Plant and Animal Genome, March 29-31, 2018, Modi University of Science and Technology, Lakshamgarh, p. 35.

Bhargava, A., Panwar, J. and Karmakar, S. 2018.

A systematic approach towards identification of a single protein responsible for synthesis and stabilization of silver nanoparticles. In: XIV International Conference on Nanostructured Materials (Nano-2018), June 24-29, 2018, City University of Hong Kong, Hong Kong.

Pareek., V., Gupta, R., Bhargava, A., Bhanot, V. and Panwar, J. 2018.

Gene expression profiling of Escherichia coli K12 to unveil the silver resistance machinery. In: 6^th Central European Symposium on Antimicrobials and Animircrobial Resistance (CESAR-2018), Crotian Microbiology Society, September 19-22, 2018, University of Zegreb, Zagreb, Croatia. (Best Poster Presentation Award).

Pareek, V., Shabrinath, S., Bhanot, V., Devineau, S., Panwar, J. and Fanning, S. 2019.

Effect of lysozyme coated silver nanoparticles on the transcriptomic response of Klebsiella pneumonia MGH78578. In: European Congress of Clinical Microbiology & Infectious Disease (ECCMID-2019), April 13-16, 2019, Amsterdam, Netherlands.

Bhanot, V., Fadanavis, S.V. and Panwar, J. 2019.

Fungal-mediated degradation of polystyrene. In: 60^th Annual Conference of Association of Microbiologists of India (AMI-2019) and International Symposium on “Microbial Technologies in Sustainable Development of Energy, Environment Agriculture and Health”. November 15-18, 2019, Central University of Haryana, Mahendragarh.

Bhanot, V., Fadanavis, S.V., Shobham and Panwar, J. 2020.

Can Similarities Between Plastics and Cuticular Wax Facilitate the myco-degradation of Plastics. In: “ASM Microbe 2020”, June 18-22, 2020, Chicago, Illinois, USA (Online).

Kumar K, A., Panwar, J., Gupta, S. and Shobham.

One-pot synthesis of metal oxide-clay composite for the evaluation of dye removal studies: Taguchi optimization of parameters and antibacterial studies. In: “International Conference on Technological Interventions for Sustainability (CHEM-CONFLUX 22)”, April 14-16, 2022, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, p. 67.

Bhanot, V. and Panwar, J. 2022.

Understanding the surface micromorphology and chemical composition of the epicuticular wax over the leaves of xerophytes. In: “FEMS Conference on Microbiology”, June 30-July 02, 2022, Belgrade, Serbia (Online).

Yadav, B.K., Akhtar, M.S. and Panwar, J. 2015.

Rhizospheric plant microbe interactions: Key factor to soil fertility and plant nutrition. In: Plant Microbe Symbiosis: Applied Facets, N.K. Arora (Ed.), Springer, India, pp. 127-145.

Solanki, P., Bhargava, A., Chhipa, H., Jain, N. and Panwar, J. 2015.

Nano-fertilizers and their smart delivery system. In: Emerging Nanotechnologies in Agriculture, Rai, M., Ribeiro, C., Mattoso, L. and Duran, N. (Eds.), Springer, Switzerlandt, pp. 81-101.

Yadav, R.S., Panwar, J., Meena, H.N., Thirumalaisamy, P.P. and Meena, R.L. 2015.

Developing disease suppressive soil through agronomic management. In: Organic Amendments and Soil Suppressiveness in Plant Disease Management, Meghwanshi M.K. and Verma, A. (Eds.), Springer International Publishing, Switzerlandt, pp. 61-94.

Akhtar, M.S., Panwar, J., Abdullah, S.N.A. and Siddiqui, Y. Swamy, M.K. and Ashkani, S. 2015.

Biocontrol of plant parasitic nematodes by fungi: efficacy and control strategies. In: Organic Amendments and Soil Suppressiveness in Plant Disease Management, Meghwanshi M.K. and Verma, A. (Eds.), Springer International Publishing, Switzerlandt, pp. 219-247.

Yadav, R.S., Mahatma, M.K. Thirumalaisamy, P.P., Meena, H.N., Arora, S. and Panwar, J. 2017.

Arbuscular mycorrhizal fungi (AMF) for sustainable soil and plant health in salt-affected soils. In: Bioremediation of Salt Affected Soils: An Indian Perspective, Arora, S. Singh, A.K. and Singh, Y.P. (Eds.), Springer International Publishing AG, DOI: 10.1007/978-3-319-48257-6_7.

Akhtar, M.S., Swamy, M.K., Alaraidh, I.A. and Panwar, J. 2017.

Genomic data resources and data mining. In: Plant Bioinformatics, Hakeem, K.R., Malik, A., Vardar-Sukan, F. and Ozturk, M. (Eds.), Springer International Publishing AG, Switzerlandt, pp. 267-278.

Agarwal, S., Kuchlan, M., Panwar, J. and Sharma, M. 2019.

Bacterial synthesis of metallic nanoparticles - Current trends and potential applications as soil fertilizer and plant protectants. In: Nanoscale Engineering in Agricultural Management, Raliya, R. (Ed.), CRC Press Taylor & Francis Group, Boca Raton, FL, pp. 30-63.

Bhanot, V., Pareek, V. Fadanvis, S.V. and Panwar, J. 2020.

Myco-degradation of plastics. In: New and Future Developments in Microbial Biotechnology and Bioengineering, Singh, J. and Gehlot, P. (Eds.), Elsevier, Amesterdam, Netherlands, pp. 25-34.

Jha, P., Panwar, J. and Jha, P.N. 2015.

Secondary plant metabolites and root exudates: guiding tools for polychlorinated biphenyl biodegradation. International Journal of Environmental Science and Technology, 12: 789-802.

Bhargava, A., Jain, N., Gangopadhyay, S. and Panwar, J. 2015.

Development of gold nanoparticle-fungal hybrid based heterogenous interface for catalytic applications. Process Biochemistry, 50: 1293-1300.

Jain, N., Alam, P., Laskar, I.R. and Panwar, J. 2015.

Aggregation induced phosphorescence’ active iridium(III) complexes for integrated sensing and inhibition of bacteria in aqueous solution. RSC Advances, 5: 61983-61988.

Jain, N., Bhargava, A., Rathi, M. and Panwar, J. 2015.

Removal of protein capping enhances the antibacterial efficiency of biosynthesized silver nanoparticles. PLoS ONE, DOI: 10.1371/journal.pone.0134337.

Bhargava, A., Jain, N., Khan, M.A., Pareek, V., Dilip, R.V. and Panwar, J. 2016.

Utilizing metal tolerance potential of soil fungus for efficient synthesis of gold nanoparticles with superior catalytic activity for degradation of rhodamine B. Journal of Environmental Management, 183: 22-32.

Jain, N., Bhargava, A., Pareek, V., Akhtar, M.S. and Panwar, J. 2017.

Does seed size and surface anatomy play role in combating phytotoxicity of nanoparticles? Ecotoxicology, 26: 238-249.

Fageria, L., Pareek, V., Dilip, R.V., Bhargava, A., Pasha, S.S., Laskar, I.R., Saini, H., Dash, S., Chowdhury, R. and Panwar, J. 2017.

Biosynthesized protein-capped silver nanoparticles induce ROS-dependent pro-apoptotic signals and pro-survival autophagy in cancer cells. ACS Omega, 2: 1489-1504.

Pradhan, S.K., Panwar, J. and Gupta, S. 2017.

Enhanced heavy metal removal using silver-yttrium oxide nanocomposites as novel adsorbent system. Journal of Environmental Chemical Engineering, 5: 5801-5814.

Pareek, V., Bhargava, A., Vishalakshi, Gupta, R., Jain, N. and Panwar, J. 2018.

Formation and Characterization of Protein Corona around Nanoparticles: A Review. Journal of Nanoscience and Nanotechnology, 18: 6653-6670.

Jha, P., Panwar, J. and Jha, P.N. 2018.

Mechanistic insights on plant root colonization by bacterial endophytes: a symbiotic relationship for sustainable agriculture. Environmental Sustainability, 1: 25-38.

Pareek, V., Gupta, R. and Panwar, J. 2018.

Do physico-chemical properties decide the bactericidal impact of silver species? Materials Science and Engineering C, 90: 739-749.

Bhargava, A., Pareek, V., Roy Choudhury, S., Panwar, J. and Karmakar, S. 2018.

Superior bactericidal efficacy of fucose functionalized silver nanoparticles against Pseudomonas aeruginosa PAO1 and prevention of its colonization on urinary catheters. ACS Applied Materials & Interfaces, 10: 29325-29337.

Pradhan, S.K., Pareek, V., Panwar, J. and Gupta, S. 2019.

Synthesis and characterization of ecofriendly silver nanoparticles combined with yttrium oxide (Ag-Y₂O₃) nanocomposite with assorted adsorption capacity for Cu(II) and Cr(VI) removal: A mechanism perspective. Journal of Water Process Engineering, 32: 100917-100931.

Pareek, V., Bhargava, A. and Panwar, J. 2020.

Biomimetic approach for multifarious synthesis of nanoparticles using metal tolerant fungi: A mechanistic perspective. Materials Science and Engineering: B, 262: 114771-114778.

Bhanot, V., Fadanavis, S.V. and Panwar, J. 2021.

Revisiting the architecture, biosynthesis and functional aspects of the plant cuticle: there is more scope. Environmental and Experimental Botany, 183: 104364-104375.

Bhargava, A., Dev, A., Mohanbhai, J.S., Pareek, V., Jain, N., Roy Choudhury, S., Panwar, J. and Karmakar, S. 2021.

Pre-coating of protein modulate patterns of corona formation, physiological stability and cytotoxicity of silver nanoparticles. Science of the Total Environment, 772: 144797-144808.

Pareek, V., Devineau, S., Sivasankaran, S.K., Bhargava, A., Panwar, J., Srikumar, S. and Fanning, S. 2021.

Silver nanoparticles induce a triclosan-like antibacterial action mechanism in multi-drug resistant Klebsiella pneumoniae. Frontiers in Microbiology, 12: 638640. doi: 10.3389/fmicb.2021.638640.

Kumar K, A.,Yeshwanth, M., Kumar B, K., Panwar, J. ad Gupta, S. 2022.

Functionalized Cu-based metal oxide nanoparticles with enhanced Cd⁺²adsorption capacity and their ecotoxicity assessment by molecular docking. Journal of Environmental Management, 307: 114523.

Pareek, V., Gupta, R., Devineau, S., Sivasankaran, S.K., Bhargava, A., Khan, M.A., Srikumar, S., Fanning, S. and Panwar, J. 2022.

Does silver in different forms affect bacterial susceptibility and resistance? A mechanistic perspective. ACS Applied Biomaterials, 5: 801-817.

Courses taught -Graduate

Product Design and Development
Concurrent Engineering
Flexible Manufacturing Systems
Concurrent Engineering
Maintenance Engineering
Machine Tool Engineering

Courses taught -Undergraduate

Sustainable Manufacturing
Manufacturing Management
Casting and Welding
Computer Aided Manufacturing
Flexible Manufacturing Systems
Workshop Practice
Production Techniques
Production and Processing
Design of Machine Elements
Maintenance and Safety
Transport Phenomena
Maintenance and Safety
Plant Layout and Design
Industrial Engineering Techniques

Courses Taught / Teaching

General Biology (BIO C111 and BIO F111)
Measurement Techniques-I (TA C211)
Microbiology (BIO C241 / BIO F212)
Biology Project Lab (BIO C231)
General Physiology (BIO C342)
Plant Physiology (BIO F312)
Laboratory (BIO C411 / BIO F411)
Plant Biotechnology (BIO G643)
Cell & Tissue Culture Technology (BIO G641)
Advance and Applied Microbiology (BIO G523)
Study Oriented Project (BITS C324)
Lab Oriented Project (BITS C313)
Professional Practice I (BITS G620)
Professional Practice II (BITS G621)
Study in Advanced Topics (BITS G513)
Advanced Projects (BITS G511)
Research Practice (BITS G540)
Special Project (BIO F491)

July 1997 – November 2003

Lecturer, Department of Mechanical Engineering

December 2003 – July 2010

Assistant Professor, Department of Mechanical Engineering

August 2010 – January 2015

Associate Professor, Department of Mechanical Engineering

February 2015 – till Date

Professor, Department of Mechanical Engineering

List of Off-Campus courses taught at BITS Pilani

Thermodynamics
Design Projects [DE G522] - No. of Semesters Taught: 4
Maintenance & Safety (for BS)
Maintenance Engineering and safety (for MS)
Mechanical Technology

Sang-Jin Kim , Chandrasekar, B, Anne C. Rea , Linda Danhof , Starla Zemelis-Durfee , Nicholas Thrower , Zachary S. Shepard , Markus Pauly , Federica Brandizzi , Kenneth Keegstra.

The synthesis of xyloglucan, an abundant plant cell wall polysaccharide, requires CSLC function, 2020, PNAS (Impact factor, 9.4)

Pierre Buscaill, Chandrasekar, B, Nattapong Sanguankiattichai, Jiorgos Kourelis, Farnusch Kaschani, Emma L. Thomas, Kyoko Morimoto, Markus Kaiser, Gail M. Preston, Yuki Ichinose and Renier A. L. van der Hoorn.

Glycosidase and flagellin glycan polymorphism control hydrolytic release of immunogenic peptides, 2019, Science, 364 (6436) (Impact factor, 41.8)

List of On-Campus courses taught at BITS Pilani

Mechanical System Design [ME G521] - No. of Semesters Taught: 5
Design Projects [DE G522] - No. of Semesters Taught: 4
Advanced Mechanics of Solids and Kinematics [ME C392] - No. of Semesters Taught: 7
Computer Aided Design (Selected topics only) - No. of Semesters Taught: 2
Design of Machine Elements [ME C312] - No. of Semesters Taught: 4
Dynamics of Machines and Vibration [ME C422] - No. of Semesters Taught: 1
Engineering Graphics [TA C111] - No. of Semesters Taught: 9
Mechanics of Solids [ES C221] - No. of Semesters Taught: 7
Production Techniques [ME C 342] - No. of Semesters Taught: 1
Thermodynamics [ES C 112] - No. of Semesters Taught: 8
Transport Phenomena –I [ ME C221] - No. of Semesters Taught: 4
Workshop Practice TA C112] - No. of Semesters Taught: 5

Poret, M., Chandrasekar, B., van der Hoorn, R.A.L., Déchaumet, S., Bouchereau, A., Kim, T.-H., Lee, B.-R., Macquart, F., Hara-Nishimura, I., and Avice, J.-C. (2019)

A Genotypic Comparison Reveals That the Improvement in Nitrogen Remobilization Efficiency in Oilseed Rape Leaves Is Related to Specific Patterns of Senescence-Associated Protease Activities and Phytohormones. Front. Plant Sci. 10

Husaini, A.M., Morimoto, K., Chandrasekar, B., Kelly, S., Kaschani, F., Palmero, D., Jiang, J., Kaiser, M., Ahrazem, O., Overkleeft, H.S., et al. (2018).

Multiplex fluorescent, activity-based protein profiling identifies active α-glycosidases and other hydrolases in plants. Plant Physiol. pp.00250.2018.

Poret, M., Chandrasekar, B., van der Hoorn, R.A.L., Coquet, L., Jouenne, T., and Avice, J.-C. (2017).

Proteomic Investigations of Proteases Involved in Cotyledon Senescence: A Model to Explore the Genotypic Variability of Proteolysis Machinery Associated with Nitrogen Remobilization Efficiency during the Leaf Senescence of Oilseed Rape. Proteomes 5.

Santos, R.B., Chandrasekar, B., Mandal, M.K., Kaschani, F., Kaiser, M., Both, L., van der Hoorn, R.A.L., Schiermeyer, A., and Abranches, R. (2018)

Low Protease Content in Medicago truncatula Cell Cultures Facilitates Recombinant Protein Production. Biotechnol. J.

Chandrasekar, B., Hong, T.N and Van der Hoorn, R.A.L. (2017).

Inhibitor discovery by convolution Activity-Based Protein Profiling (ABPP) Methods in Molecular Biology 1491, 47-56

Courses in Current Semester (Sem-Il, 2012-2013)

Machine Design & Drawing

Machine Design & Drawing - Budynas, R. G. and Nisbett, K. J., “Shigley's Mechanical Engineering Design" Tata–McGraw Hill, 9th Edition, New Delhi, 2011
Machine Design & Drawing Practical - Cencil Jensen, Jay D. Helsel & Dennis R.Short, Engineering Drawing & Design, Tata McGraw-Hill 7th Ed. 2012.

Class Hrs

T, Th, S 10AM to 10.50PM

Chandrasekar, B and Van der Hoorn, R.A.L. (2016).

Beta galactosidases in Arabidopsis and tomato - a mini review. Biochemical society transactions 44(1), 150-158.

Daneri-Castro, S.N., Chandrasekar, B., Grosse-Holz, F.M., Van der Hoorn, R.A.L., Roberts, T.H. (2016).

Activity-based protein profiling of hydrolytic enzymes induced by gibberellic acid in isolated aleurone layers of malting barley. FEBS letters 590 (17), 2956-62

Stiti, N., Chandrasekar, B., Strubl, L., Bartels, D and Van der Hoorn, R.A.L. (2016)

Nicotinamide Cofactors Suppress Active-site Labeling of Aldehyde Dehydrogenases. ACS Chemical Biology 11 (6), 1578–1586.

Poret, M., Chandrasekar, B., Van der Hoorn, R.A.L and Avice, J.C. (2016).

Characterization of senescence-associated protease activities involved in the efficient protein remobilization during leaf senescence of winter oilseed rape. Plant Science 246, 139-53.

Lu, H., Chandrasekar, B., Oeljeklaus, J., Misas-Villamil, J.C., Wang, Z., Shindo, T., Bogyo, M., Kaiser, M., and Van der Hoorn, R.A.L. (2015).

Subfamily-specific Fluorescent Probes for Cys proteases Display Dynamic Protease Activities During Seed Germination. Plant Physiol. pp.114.254466.

Chandrasekar, B., Colby, T., Emon, A.E.K., Jiang, J., Hong, T.N., Villamor, J.G., Harzen, A., Overkleeft, H.S., and Van der Hoorn, R.A.L. (2014)

Broad-range Glycosidase Activity Profiling. Mol. Cell. Proteomics 13, 2787–2800.

Ulker, B., Hommelsheim, C.M., Berson, T., Thomas, S., Chandrasekar, B., Olcay, A.C., Berendzen K.W., Frantzeskakis, L. (2012)

Reevaluation of the reliability and usefulness of the somatic homologous recombination reporter lines. Plant Cell 24: 4314-4323.

Vichangal, P.S.K., Raja, K., Natarajan, S., Srinivasan, N., and Chandrasekar, B (2011)

Molecular Docking Study on the anti-inflammatory effect of Osthol and its derivatives towards human p38alpha MAP kinase International Journal of Bioinformatics 4: 1-9

2014

D Joshi, A Purwar, M S Dasgupta Human detection based on explicit skin colour space thresholding and minor motion detection. INDICON 2014, IEEE Conference Pune; December 2014

2014

Dileep Kumar Gupta, M S Dasgupta Simulation and performance optimization of finned tube gas cooler for trans-critical CO2 refrigeration system in Indian context, International Journal of Refrigeration, Elsevier 38 153-167 2014

2015

Dileep Kumar Gupta Mani Sankar Dasgupta Chapter 10: Transcritical CO2 Refrigeration System in Tropical Region: Challenges and Opportunities Publication date 2015/7, Handbook of Research on Advances and Applications in Refrigeration Systems and Technologies, IGI Global Volume 1., Pages 370 - 401, doi:10.4018/978-1-4666-8398-3

2015

Nilesh Purohit, Dileep Kumar Gupta, M S Dasgupta Effect of inter-stage pressure on the performance of a two stage refrigeration cycle using inter cooler, ICAER 2015, IIT Bombay

Simarpreet Singh, M S Dasgupta Work recovery scroll expander modeling for trans-critical CO2, refrigeration system at high ambient temperature, ICAER 2015, IIT Bombay

Dhruv Tandon Kshitij Patil, M S Dasgupta , Designing a Modular Rope Climbing Bot, (INDICON 2015, IEEE Conference New Delhi, Jamia Milia; 12/2015

D Joshi, A Purwar, M S Dasgupta Smart Control of Electric Lamp using Artificial Intelligence based Controller, INDICON 2015, IEEE Conference New Delhi, Jamia Milia; 12/2015

Nilesh Purohit, Dileep Kumar Gupta, M S Dasgupta Thermodynamic analysis of trans-critical CO2 refrigeration cycle in Indian context NCEEITET-15, at GCEIT Jammu, 2015

Simarpreet Singh, M S Dasgupta Evaluation of refrigerant options using TOPSIS-MADM technique, NCEEITET-15, at GCEIT Jammu, 2015

2015

P Chansoria, P Solanki, M S Dasgupta Parametric study of transient temperature distribution in FSW of 304L stainless steel The International Journal of Advanced Manufacturing Technology, Springer September 2015, Volume 80, Issue 5, pp 1223–1239

2016

Simarpreet Singh, M S Dasgupta Evaluation of research on CO2 trans-critical work recovery expander using multi attribute decision making methods, Renewable and Sustainable Energy Reviews, Elsevier 59, 119-129 2016

Simarpreet Singh, Nilesh Purohit, M S Dasgupta, Comparative study of cycle modification strategies for trans-critical CO2 refrigeration cycle in Indian context, Case Studies in Thermal Engineering, Elsevier. Vol. 7, March 2016, Pages 78–91

2017

Nilesh Purohit, Dileep Kumar Gupta, Mani Sankar Dasgupta, 2017. “Two-Stage Carbon Dioxide Refrigeration Cycle, Lambert Academic Publishing (LAP), ISBN No. 978-3330322073.https://www.amazon.in/Two-Stage-Carbon-Dioxide-Refrigeration-cycles/dp/3330322071

2017

Kapil Dev Choudhary, Mani Sankar Dasgupta, Shyam Sunder, Investigation of effect of suction nozzle pressure drop and degree of sub-cooling on co2 transcritical ejector system, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani,Hyderabad Campus

Nilesh Purohit, Dileep Kumar Gupta, Mani Sankar Dasgupta, Theoretical analysis of four two-stage CO2 configurations for year round operation, ICAER 2017, 12 -14 DEC 2017, IIT Bombay

2018

Nilesh Purohit, Dileep Kumar Gupta, M S Dasgupta, Experimental investigation of co2 trans-critical refrigeration system with and without internal heat exchanger for warm climate, 13th IIR-Gustav Lorentzen Conference on Natural Refrigerants, 18-20th June 2018, Valencia, SPAIN

Kapil Dev Choudhary, M S Dasgupta, Shyam Sunder, Comparative study on a dual temperature transcritical refrigeration cycle with two cascade ejectors, 13th IIR-Gustav Lorentzen Conference on Natural Refrigerants, 18-20th June 2018, Valencia, SPAIN

Nilesh Purohit, Dileep Kumar Gupta, Mani Sankar Dasgupta, Exergetic analysis of CO2 trans-critical refrigeration system with and without internal heat exchanger using experimental data, 5th IIR Conference on Sustainability and the Cold Chain (ICCC 2018), 06-08 April 2018 Beijing, China

Nilesh Purohit, Dileep K Gupta, M S Dasgupta, Experimental investigation of a CO2 trans-critical cycle with IHX for chiller application and its energetic and exergetic evaluation in warm climate, Applied Thermal Engineering, Elsevier, https://doi.org/10.1016/j.applthermaleng.2018.03.044

Paride Gullo, Nilesh Purohit, Mani Sankar Dasgupta, Armin Hafner, Krzysztof Banasiak, Comparative Study of Various Supermarket Refrigerating Systems In European Climate Context, 5th IIR Conference on Sustainability and the Cold Chain (ICCC 2018), 06-08 April 2018 Beijing, China

Paride Gullo, Nilesh Purohit, Mani Sankar Dasgupta, Armin Hafner, A Comparative Study On Energetic and Environmental Performance Of An Integrated R744 Multi-Ejector Enhanced Parallel Compression System In High Ambient Temperature Locations, 5th IIR Conference on Sustainability and the Cold Chain (ICCC 2018), 06-08 April 2018 Beijing, China

Kapil Dev Choudhary, M. S. Dasgupta, Shyam Sunder, Energetic And Exergetic Investigation of a Modified Dual Temperature Transcritical Refrigeration Cycle With Two Cascade Ejectors, 5th IIR Conference on Sustainability and the Cold Chain (ICCC 2018), 06-08 April 2018 Beijing, China

Bioinformatics Tool Developed

EGF-like domains are found in a variety of proteins and are usually implicated in protein-protein interactions. EGF-like domains can be categorized into 3 types TYPE-I, TYPE-II and TYPE-III EGF domains based upon their structure and function. EGF like Domains Analysis & Comparison Package is a web based Bioinformatic tool that can analyze the given sequence and predict if it contains EGF-like domains. Given a Sequence in any format, it would search for EGF type domains in it and also specify the positions of these domains if any. The tool is GUI based and has been developed using JAVA Applet Programming. EGF like Domains Analysis & Comparison Package also shows the relative graphical positioning of these domains and one can query for the sequences of these domains. The tool also consists of an EGF library, which has about 200 different sequences that contain EGF domains in them. The program uses basic Bioinformatic searching algorithm technique to match to a particular given sequence. It first searches for a set of six Cysteines in the sequence and passes it on for further analysis. Once a set of six Cysteines has been identified, the program looks for whether the given part of the sequence matches to Type-I, Type-II or Type-III domain, based on weight given to each type of domain. As the sequence is matched to each of the Types, a count is increased for each of them. The matching is first carried out on the basis of sequence and then based on the gaps between each of the Cysteines in each of the Domain Types. Once a residue is matched to the set standards the count is increased and once it does not match the count is decreased and so on for each of the domain. Finally all three counts are compared and the Type of Domain identified. If all the counts are too low to be compared then the result is ‘NO EGF like Sequences Found’.

2018

Nilesh Purohit, Vishaldeep Sharma, Samer Sawalh, Brian Fricke, Rodrigo Llopis, Mani Sankar Dasgupta, Integrated supermarket refrigeration for very high ambient temperature. Energy, Elsevier, DOE:https://doi.org/10.1016/j.energy.2018.09.097

Nilesh Purohit, Sanjeev Jakhar, Paride Gullo, Mani Sankar Dasgupta, Heat transfer and entropy generation analysis of alumina/water nanofluid in a flat plate PV/T collector under equal pumping power comparison criterion, Renewable Energy, Elsevier, May 2018, https://doi.org/10.1016/j.renene.2017.12.066

Kapil Dev Choudhary, Ashish Nayyar, Mani Sankar Dasgupta, Effect of compression ratio on combustion and emission characteristics of C.I. Engine operated with acetylene in conjunction with diesel fuel, Fuel, Elsevier, Volume 214, 15 February 2018, Pages 489-496

Post-Doctoral Research Area

The primary focus of the project was CTL mediated responses to the hsp 70 of Plasmodium falciparum. The work involved cloning and expression of the P.falciparum hsp 70 gene is a Salmonella system. The gene was also cloned into vectors for use in DNA immunization of different murine strains and in the selectable mammalian expression vector pcDNA3 (Invitrogen).

Experiments were initiated to evaluate the expression of the gene in different mammalian cell lines prior to the immunization of the different murine strains with recombinant DNA vector constructs and the establishment of stable transfectants. Peptides were also designed based on predictive analysis of the P.falciparum hsp 70 gene with reference to CTL epitopes of different murine haplotypes. Experiments were initiated to standardize the CTL assays in different strains of mice using various preexisting vaccinia constructs expressing hsp 70.

In a separate project the P.falciparum hsp 60 gene was expressed in E.coli and the protein partially purified using a 5' polyhistidine tag. Purified protein was used to produce antibodies in mice and experiments were performed to evaluate the expression of hsp 60 in P.falciparum and to evaluate the distribution and localization of hsp 60 in different parasite stages.

2019

Santosh Kumar Saini, Mani Sankar Dasgupta, Kristina N. Widell, Souvik Bhattacharyya, Thermal and economic analysis of an on-board compensatory refrigeration system for small fishing boats, 25th National and 3rd International ISHMT - ASTEF Heat and Mass transfer Conference, Roorkee India, December 28-31, 2019

Nilesh Purohit, Mani Sankar Dasgupta, Thermal Storage Material Enhanced Refrigerated Display Cabinet, International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), BITS Pilani, Dubai Campus, UAE, November 28-29th, 2019

Nilesh Purohit, M S Dasgupta, Numerical Investigation Of A Hybrid (Cu-Alumina) Nanofluid Cooled Double Pipe Gas Cooler For a Trans-Critical CO2 Refrigeration System, International Conference ICNBL-2019 held at at NIT Srinagar, 7th to 11th April 2019

Mani Sankar Dasgupta, Srikanta Routroy, Kristina N. WIDELL Souvik Bhattacharyya, Maitri Thakur, A Strategy for improved temperature control in the supply and processing stages of Surimi cold chain in India. 25th IIR International Congress of Refrigeration, Montreal Canada, August 24-30, 2019

Srikanta Routroy, Mani Sankar Dasgupta, Maitri Thakur, Souvik Bhattacharyya, Kristina N. Widell, Surimi value chain in India: A strategy for improved resource utilization. 25th IIR International Congress of Refrigeration, Montreal Canada, August 24-30, 2019

Kochar D, Saxena V, Singh N, Kochar S, Kumar V, Das A.

(2005). Plasmodium vivax malaria. Emerging Infectious Diseases; 2005. 11(1), 132-134.

Kochar DK, Pakalapati D, Kochar SK, Sirohi P, Khatri MP, Kochar A, Das A.

An unexpected cause of fever and seizures. The Lancet; 2007. 370(9590), 908.

Acharya P, Pallavi R, Chandran S, Chakravarti H, Middha S, Acharya J, Kochar SK, Kochar DK, Subudhi AK, Boopathi PA, Garg S, Das A, Tatu U.

A glimpse into the clinical proteome of human malaria parasites Plasmodium falciparum and Plasmodium vivax. Proteomics Clinical Applications; 2009. 3(11), 1314–1325.

2019

Darmanaden Soobena, Nilesh Purohit, Romeela Moheec, Francis Meunierd, Mani Sankar Dasgupta, R744 refrigeration as an alternative for the supermarket sector in Small Tropical Island Developing States: The Case of Mauritius https://doi.org/10.1016/j.ijrefrig.2019.03.034

Nilesh Purohit,Vishaldeep Sharma, Brian Fricke, Dileep Kumar Gupta, Mani Sankar Dasgupta, Parametric analysis and optimization of CO2 trans-critical cycle for chiller application in a warm climate, doi.org/10.1016/j.applthermaleng.2019.01.023

Kochar DK, Das A, Kochar SK, Saxena V, Sirohi P, Garg S, Kochar A, Khatri MP, Gupta V.

Severe Plasmodium vivax Malaria: A Report on Serial Cases from Bikaner in Northwestern India. The American Journal of Tropical Medicine and Hygiene; 2009. 80(2), 194-198.

Boopathi PA, Subudhi AK, Garg S, Middha S, Acharya J, Pakalapati D, Saxena V, Aiyaz M, Chand B, Mugasimangalam RC, Kochar SK, Sirohi P, Kochar DK, Das A.

Revealing natural antisense transcripts from Plasmodium vivax isolates: Evidence of genome regulation in complicated malaria. Infection, Genetics and Evolution; 2013. 20, 428–443.

Subudhi AK, Boopathi PA, Garg S, Middha S, Acharya J, Pakalapati D, Saxena V, Aiyaz M, Chand B, Mugasimangalam RC, Kochar SK, Sirohi P, Kochar DK, Das A.

Natural Antisense Transcripts in Plasmodium falciparum isolates from patients with complicated malaria. Experimental Parasitology; 2014. 141, 39-54.

Subudhi AK, Boopathi PA, Pandey I, Kohli R, Karwa R, Middha S, Acharya J, Kochar SK, Kochar DK, Das A

Plasmodium falciparum complicated malaria: Modulation and connectivity between exportome and variant surface antigen gene families. Molecular and Biochemical Parasitology; 2015. 201(1), 31–46.

Subudhi AK, Boopathi PA, Pandey I, Kaur R, Middha S, Acharya J, Kochar SK, Kochar DK, Das A.

Disease specific modules and hub genes for intervention strategies: A co-expression network based approach for Plasmodium falciparum clinical isolates. Infection, Genetics and Evolution; 2015. 35, 96-108.

Boopathi PA, Subudhi AK, Middha S, Acharya J, Mugasimangalam RC, Kochar SK, Kochar DK, Das A.

Design, construction and validation of a Plasmodium vivax microarray for the transcriptome profiling of clinical isolates. Acta Tropica; 2016. 164, 438-447.

Shah RK, Pati S, Saini M, Boopathi PA, Kochar SK, Kochar DK, Das A, Singh S

Reduction of sphingosine kinase 1 phosphorylation and activity in Plasmodium-infected erythrocytes. Frontiers in Cell and Developmental Biology; 2020. 80(8), 1-15.

Pandey I, Quadiri A, Wadi I, Pillai CR, Singh AP, Das A

Conserved Plasmodium Protein (PF3D7_0406000) of Unknown Function: In-silico Analysis and Cellular Localization. Infection, Genetics and Evolution; 2021. 92(104848), 1-9.

Kumar PS, Bhand S, Das AK, Goel S

Microfluidic paper device with on-site heating to produce reactive peroxide species for enhanced smartphone enabled chemiluminescence signal. Talanta; 2022. 236 (122858), 1-8.

2020

Dasgupta, M. S, et al. . ReValue project Report–D1.3: Report on energy efficient refrigeration systems-Surimi case. (2020). ISBN 978-82-7174-394-9 Dasgupta, M. S, et al. (2020). ReValue project Report–D1.2: Logistics and Cold Chain Management Concepts. (2020). A-094. RCN 978-82-7174-393-2 Dasgupta, M. S, et al. ReValue Project Report Deliverable D1.1: Value stream map and supply chain interdependencies in India. ISBN 978-82-7174-375-8

2020

Kapil Dev Choudhary, M S Dasgupta, Shyam Sunder, Effect of motive nozzle exit position in a R-744 two phase ejector, 1st Online International Conference on Recent Advances in Computational and Experimental Mechanics, IIT Kharagpur , ICRACEM 2020 Santosh Kumar Saini, Mani Sankar Dasgupta, Kristina N. Widell, Souvik Bhattacharyya, Performance evaluation of a multi-evaporator NH3-CO2 cascade refrigeration system with IHX for seafood processing industry, The 14th IIR-Gustav Lorentzen Conference on Natural Refrigerants - GL2020,

2020

Purohit, N., & Dasgupta, M. S., Thermal storage material enhanced refrigerated display cabinet. Materials Today: Proceedings, Volume 28, Part 2, Pages 510-514 (2020)

2021

S K Saini, M Dasgupta, K N.Widell, S Bhattacharyya. Comparative Analysis of a Few Novel Multi-evaporator CO2-NH3 Cascade Refrigeration System for Seafood Processing & Storage. International Journal of Refrigeration, DOI: https://doi.org/10.1016/j.ijrefrig.2021.07.017 S Singh, B Trivedi, M S Dasgupta, S Routroy. A bibliometric analysis of circular economy concept in E-waste research during the period 2008–2020, Materials Today: Proceedings S Singh, MS Dasgupta, S Routroy, Analysis of Critical Success Factors to Design E-waste Collection Policy in India: A Fuzzy DEMATEL Approach, Springer Environ Sci Pollut. Res. (2021). https://doi.org/10.1007/s11356-021-16129-x

2021

K D Choudhary, S S Yadav, M S Dasgupta, Classical nucleation theory based simulations of non-equilibrium condensation of carbon dioxide inside converging–diverging nozzles. , ASTFE 5th–6th Thermal and Fluids Engineering Conference (TFEC), May 26-28, 2021

Kapil Dev Choudhary, Shyam Sunder Yadav, M S Dasgupta, Simulation of the Phase Change Process of Carbon Dioxide Inside an Ejector Geometry. March 2021, Conference: 2nd International Conference on Recent Advances in Fluid and Thermal SciencesAt: Dubai, UAE.

Kapil Dev Choudhary, M S Dasgupta, Shyam Sunder, Ejector Expansion Transcritical R744 Refrigeration System Analysed for Various Climate Zones of India. March 2021, Conference: 2nd International Conference on Recent Advances in Fluid and Thermal Sciences At: Dubai, UAE.

Santosh Kumar Saini, Mani Sankar Dasgupta, Kristina Norne Widell and Souvik Bhattacharyya. Natural refrigerant based cascade system for seafood application, FMFP 2021, BITS Pilani, Pilani Campus, December 27-29, 2021

Leo Daniel Alexander, Sanjeev Jakhar and Mani Sankar Dasgupta, Pressure drop analysis for U-tube Evacuated Tubular Collector. FMFP 2021, BITS Pilani, Pilani Campus, December 27-29, 2021

Ayan Sengupta, Mani Sankar Dasgupta, Thermodynamic analysis of a novel dual-ejector multi-compressor transcritical-CO2 refrigeration system for Supermarket applications in warm climates. FMFP 2021, BITS Pilani, Pilani Campus, December 27-29, 2021

2022

KD Choudhary, MS Dasgupta, SS Yadav, Effect of Motive Nozzle Exit Position in a R-744 Two-Phase Ejector, Recent Advances in Computational and Experimental Mechanics, Springer (LNME), Singapore Vol—I, 237-247

Group Leader, Biological Sciences Group, BITS Pilani, Pilani Campus (January, 2007 – April, 2010)

Involved in the creation of a team of individuals, with varying talents, to enhance teaching at both first degree and higher degree levels and strongly emphasize and implement a research focus in the Group. The basic caveat followed was that creative, target oriented research is a natural basic requirement for creative teaching, and would enhance quality of the overall educational experience. Involved in providing the leadership required to attempt excellence in the Department, which encompassed various aspects, ranging from facility design, fund arrangement, supply chain management and all types of maintenance related issues. It was an exhilarating experience to attempt to create a hygienic work environment for the benefit of students, faculty colleagues and the BITS system, which has strong links with various National and International Systems.

Mission 2012 and Vision 2020 for BITS Pilani

As Leader, Task Force 8 (TF8), People (Hygiene), involved in conceptualization and implementation of Policies such as the BITS Seed Grant Scheme, BITS Sabbatical Policy, the BITS Start-UP Policy (for providing some initial funding to recruited faculty) and others- aimed at providing a suitable work environment for the furtherance of education.

Dean, Research & Consultancy, BITS Pilani (April, 2010 – June, 2012)

One of the nodal control points for conceptualization, implementation and monitoring of all processes related to the PhD Programme of BITS (across campuses and the PhD Aspirants Scheme). Actively involved in process formalization and standardization across campuses with the objective of enhancing creative research and ensuring quality of the work performed. Nodal control point for monitoring and facilitation of project related funding from various sources, in Pilani campus. Facilitator, for Higher Degree and First Degree Research Oriented Courses. Involved in multi-divisional activities required for achieving the points mentioned above.

Involved in course designing and interactive teaching of both first degree (M.Sc. Hons.) and higher degree (M.E. Biotechnology) courses. Some of the course titles where I have been the Instructor – in charge/Instructor are as follows

Recombinant DNA Technology
Advances in Recombinant DNA Technology
Molecular Immunology
Developmental Biology
Molecular Biology and Immunology
Integrated Biology
Introduction to Bioinformatics
Transgenic Technology
Animal Tissue Culture
Instrumental Methods of Analysis
Experimental Techniques (Laboratory)
Genetic Engineering (Laboratory)
General Biology
Measurement Techniques – I

2021-22 (2nd Semester: Jan – Apr 2022)

BITS F415 - Micro-Electro-Mechanical Systems (MEMS) [Lecture 3 hours per week, Lab 4 hours per week]

Handout (only for BITS students)
Instructor In-charge, 4 credit course with Lab
Brief Summary - The course introduces the basic concepts in MEMS (Micro Electromechanical Systems) with a view to address a class of students from science and engineering disciplines. The discussion on topics like MEMS design, Microfabrication, Microfluidics, Microrobotics and Microsensors have been structured in the course plan. The objective of the course is to equip the students from various aspects and with basic knowledge of the area of MEMS.
Books - Tai-Ran Hsu, MEMS and Micro systems Design and Manufacture, Tata McGraw Hill, 2002, Nitaigour P. Mahalik, MEMS, Tata McGraw Hill, 2007, G.K. Ananthsuresh et al ,’Micro and Smart Systems’, Wiley, India, 2010.

BITS F415 - Micro-Electro-Mechanical Systems (MEMS) [Lecture 3 hours per week, Lab 4 hours per week]

Handout (only for BITS students)
Instructor In-charge Dr. S. K. Dubey (MechE), 4 credit course with Lab, jointly teaching
Brief Summary - Introduction to microfluidics, scaling in microfluidics, theoretical microfluidics, Philosophy of Computational Fluid Dynamics, Concepts of discretization, fabrication techniques for microfluidic devices, microvalves, micropumps, microflow sensors, microfluidics for life sciences: micromixers, microneedles, microfilters, microseparators, microreactors, modeling and simulation on CAD tool.
Books - Fundamentals and applications of microfluidics by Nam-Trung Nguyen and Steven T. Wereley, Artech House, 2002; Introduction to Microfluidics, by Patrick Tabeling, Oxford University Press, 2005; Theoretical Microfluidcs, by Henrik Bruus, Oxford Master Series in Condensed Matter Physics, 2008; Microfluidics Fundamentals,1123123

2021-22 (1st Semester: Aug – Dec 2021)

BITS F415 - Micro-Electro-Mechanical Systems (MEMS) [Lecture 3 hours per week, Lab 4 hours per week]

Handout (only for BITS students)
Instructor In-charge, 4 credit course with Lab
Brief Summary - The course introduces the basic concepts in MEMS (Micro Electromechanical Systems) with a view to address a class of students from science and engineering disciplines. The discussion on topics like MEMS design, Microfabrication, Microfluidics, Microrobotics and Microsensors have been structured in the course plan. The objective of the course is to equip the students from various aspects and with basic knowledge of the area of MEMS.
Books - Tai-Ran Hsu, MEMS and Micro systems Design and Manufacture, Tata McGraw Hill, 2002, Nitaigour P. Mahalik, MEMS, Tata McGraw Hill, 2007, G.K. Ananthsuresh et al ,’Micro and Smart Systems’, Wiley, India, 20101111.

Jayapiriya U S, Shuhei Inoue and Sanket Goel,

S Amrutha Lahari, Khairunnisa Amreen, Satish Kumar Dubey, Ponnalagu R N

Keep Exploring

Faculty

Events

News

Old Website
Campus
Academics
Admission
BITSAT
Research & Innovation
Departments
- Pilani
- Dubai
- Goa
- Hyderabad
Important Contacts
- Pilani
- Dubai
- Goa
- Hyderabad
Divisions
- Pilani
- K K Birla Goa
- Hyderabad
- Dubai
Explore BITS
Links For
- BITS Library
- Admissions
- Faculty
- Practice School
- Placements
- Student Arena
- Career
- News
- Alumni
- Internationalization
- Events
- MOUs
- Current Students
- Invest in Leaders
- Outreach
- Picture Gallery

Integrated first degree

Higher Degree

Doctoral Programmes

WILP

Student Activities

Student Services

Integrated First Degree

Higher Degree

Doctoral Programmes

WILP

Dubai Campus

Give us your feedback

Upload Screenshot

Dr. Kaushar Vaidya

Courses

Current Semester Teaching

Teaching

Current Semester

Teaching Experience

Courses taught at NIT Srinagar

Student Supervision and Mentoring

Teaching Assistant

Assistant Professor, ITER, SOA University, Bhubaneswar (Pre PhD)

Business Analysis and Valuation

Courses Taught

Courses

Courses

Courses

Courses Taught/ Teaching

Teaching at Northeastern University:

Teaching at IISER Kolkata

At BITS-Pilani:

Courses

Courses Taught

Higher Degree :

Certification Courses Taught

Laboratory Setup :

Other Responsibilities in Teaching :

Teaching Experience

Courses Taught

UG Courses

Courses Taught

Courses

Natural Drugs

Chemistry of Natural Drugs

Forensic Pharmacy

Modern Pharmaceutical Analytical Techniques

Instrumental Methods of Analysis

Quality Assurance and Regulatory Affairs

Courses

Courses Taught

Courses Taught

Courses Taught

Courses Taught

Course name

Course code

FD/HD

Teaching Experience

10 Aug.’1998

27 Jan.’2000

Engineering Graduate, Engineering Diploma

Technical Experience

Visiting Experience

RF Microelectronics

Analog Electronics

Digital Design

Teaching Courses

Teaching

VLSI Test and Testability

Digital Design

Microelectronic Circuits

Courses Taught

Ph.D. Course

Courses

Courses Taught

Undergraduate Level

Postgraduate Level

Courses

Courses

Courses that I am teaching presently